Introduction

The First Alert Fire Extinguisher FE1A10GR is a reliable and essential safety device designed for home use, capable of tackling common household fires. Rated 1-A:10-B:C, it effectively combats fires involving wood, paper, fabric, flammable liquids, and electrical equipment. This lightweight extinguisher features a durable metal construction, an easy-to-read pressure gauge, and a pull pin with a safety seal to prevent accidental discharge. It is also rechargeable by certified professionals after use. The First Alert FE1A10GR is priced at approximately $20.

Detailed Specifications

The First Alert Fire Extinguisher FE1A10GR comes with several key features that make it an excellent choice for fire safety:

Multi-Purpose: Effective against Class A, B, and C fires.
Compact Design: Lightweight and easy to handle.
Easy to Use: Simple operation with a pull-pin and safety seal.
UL Rated: Meets or exceeds Underwriters Laboratories standards.
Warranty: Covered by a 10-year limited warranty.

IMPORTANT! Please read carefully and save.
This user’s manual contains important information about your fire extinguisher’s operation. If you are installing this fire extinguisher for use by others, you must leave this manual—or a copy of it—with the end user.
Read extinguisher label and the entire user’s manual carefully before installing or using the unit. Make sure everyone in your household is completely familiar with the operation of the extinguisher, and review the instructions regularly. In an emergency, you will not have time to read instructions.

IMPORTANT INFORMATION ABOUT FIRE EXTINGUISHERS

NOTE: Be sure the extinguisher is rated to fight the type of fire most likely to occur in the area you choose to install it. Since household fires commonly start in the kitchen, you should always install an extinguisher in the kitchen. For added security, you should also install additional extinguishers in utility areas, and other living areas in your household.

Fire extinguishers are classified by fire type. The A, B and C rating system defines the kinds of burning materials each fire extinguisher is designed to fight. The numbers in front of the A, B, or C indicate the rating for size of the fire the unit can extinguish. Using the wrong type of fire extinguisher can do more harm than good. Make sure you understand which fire extinguisher to use on each class of fire!

Class A rating: The agent/powder is suitable for fighting small fires involving wood, paper, cloth, rubber, and some plastics.
Class B rating: The agent/powder is suitable for fighting small fires involving grease, oil, gasoline, kerosene, and other flammable liquids.
Class C rating: The agent/powder is suitable for fighting small fires in "live" electrical equipment.

fire_extinguishers_first_alert_fire_extinguisher_fe1a10gr.png

FE5GR is rated Class 5-B:C.
FE10GR is rated Class 10-B:C.
FE1A10GR is rated Class 1-A:10-B:C.

READ BEFORE INSTALLING OR USING THIS FIRE EXTINGUISHER!

Danger

This extinguisher is designed for use against small fires that have just started and are small enough to fight safely. It is not designed to fight large fires that are burning out of control. If the fire is too hot or smoky for you to get within 6 feet (2 meters) of it, do not try to fight it yourself. Warn everyone, evacuate the premises, and have someone call the Fire Department from outside the building. Trying to fight a large fire yourself can result in injury or death.
Do not puncture or burn any fire extinguisher. The contents are under pressure, and the extinguisher could explode.
Never locate this extinguisher close to an engine, stove or other source of heat. It is pressurized and could rupture or explode if exposed to temperatures over 150° F (66° C).
This extinguisher contains a dry powder extinguishing agent. The agent/powder is nontoxic, but can irritate skin. When using this unit, avoid breathing the powder. Always ventilate the area after use.

WHERE TO INSTALL THIS EXTINGUISHER

A Fire Extinguisher Should Be Mounted:

In the vicinity of (but not on or in) a potential source of heat and/or fire, like an oven or stove.
Where it is easy to reach, near an exit or an escape route from the room.
In a location that is convenient, in plain sight, and 3-1/2 to 5 feet (1 to 1.5 meters) above the floor.
Store the extinguisher high enough to keep it out of the reach of small children.
On a clean, dry surface where the temperature does not go above 120° F (49° C) or below –40° F (–40° C).

Description

The First Alert Fire Extinguisher FE1A10GR is engineered to provide quick and effective response in the event of a fire emergency. The extinguisher features a durable metal head and a rust-resistant steel cylinder, ensuring longevity and reliability. The compact size makes it easy to store in tight spaces without compromising on performance.

The multi-purpose formulation allows users to tackle various types of fires with confidence. The clear instructions and easy-to-use mechanism ensure that anyone can operate the extinguisher effectively, even in high-stress situations.

HOW TO INSTALL THIS EXTINGUISHER

CAUTION

Do not mount the extinguisher on drywall or plaster without adequate support. Use strong screws or bolts to mount the bracket securely into solid wood or metal that can support it, like a wooden partition stud. Secure mounting is needed so you can remove the extinguisher quickly and easily in an emergency. Also, if the extinguisher is not held securely, it could drop to the floor and injure people or damage the extinguisher.
DO NOT BREAK THE SAFETY SEAL! This seal prevents accidental discharge of the fire extinguisher. Break the seal only in an emergency before using the fire extinguisher.

INSTALL THE MOUNTING BRACKET ON A WALL

The extinguisher has a bracket for wall mounting.
Install the mounting bracket on a wooden stud or other solid surface that will support the weight of the extinguisher using the screws or bolts you purchased.
NOTE: Since wall surface types vary, mounting screws are not included. Purchase screws or bolts specifically designed for the surface on which you will mount the fire extinguisher. The fire extinguisher label lists its maximum weight. Mounting screw head type should be #8 pan on round head screws with #8 flat washers.
After installing the mounting bracket, replace the extinguisher on the bracket with the label facing outward, so the label can be easily read. Wrap the bracket strap around the cylinder and snap the buckle closed.

install_the_mounting_first_alert_fire_extinguisher_fe1a10gr.png

INSTALLING THE MOUNTING BRACKET IN A MARINE CRAFT

According to the NFPA Standard 302 (Fire protection Standard for Pleasure and Commercial Motor Craft):

On marine craft, portable fire extinguishers shall be located to be readily accessible. Extinguishers shall be secured with a marine bracket to permit immediate release.
On marine craft, extinguisher agent cylinders shall be mounted a minimum of 2 inches (5 cm) above moist or wet surfaces to reduce the danger of corrosion.

CHECKING AND INSPECTING THE FIRE EXTINGUISHER

WARNING

DO NOT CHECK THE PRESSURE OR TEST THE FIRE EXTINGUISHER BY SQUEEZING THE LEVER, EVEN BRIEFLY. ONCE USED, IT WILL GRADUALLY LOSE PRESSURE AND WILL NOT BE FULLY CHARGED FOR USE IN AN EMERGENCY.
When the pointer drops into the red area, the extinguisher may still be pressurized, but must be recharged.

Inspect the extinguisher once a week. Remove the extinguisher from the mounting bracket and inspect the gauge. If the yellow pointer is in the GREEN area, the extinguisher is properly pressur-ized and ready to use. If the pointer drops into the RED area, the extinguisher has lost some pressure and should be replaced.
Check for signs of damage or misuse. Make sure you can still read all the text on the label. Carefully examine the surface of the extinguisher for corrosion. You can help prevent corrosion by cleaning the extinguisher if it gets wet or dirty. If you notice corrosion during the warranty period, r
Make sure the tamper indicator ("safety seal") is still intact and the nozzle is clean and unobstructed.
When you finish inspecting the extinguisher, always put it back securely into the mounting bracket.

HOW TO OPERATE YOUR FIRE EXTINGUISHER IN A FIRE EMERGENCY

DANGER

Make sure your extinguisher may be safely and effectively used on the small fire you want to fight. Always use extreme caution when fighting any fire. Fight a fire only where there is a clear escape path to allow you to get out safely if the fire gets worse.

WARNING

Avoid breathing smoke and heated fumes; stay low if necessary. Burning materials will release toxic fumes. Inhaling these fumes may cause injury or death.

CAUTION

Always stand back far enough away from the fire—near an exit—and make sure nothing is between you and your escape route. If you get too close to a fire, you risk getting burned or hit by splattering material like grease. If the fire is too hot or smoky for you to get within 6 feet (2 meters), DO NOT try to fight the fire yourself. Evacuate immediately and call the Fire Department.
For fires on a kitchen stove, turn oven or burners off immediately if possible. If you can’t reach the oven or burner controls safely, extinguish the fire first, then turn them off.
Fight the fire from an upwind direction with your back to any strong air current. Trying to fight a fire with currents blowing towards you can result in serious injury.

TO FIGHT THE FIRE

Remove the extinguisher from the mounting bracket.
Hold the unit firmly with the nozzle facing away from you. Pull out the pin to break the “Safety Seal”. You won’t be able to squeeze the lever until the safety seal is removed.
Stand back 6 feet (2 meters) from the fire and make sure the fire is not between you and your exit.
Hold the extinguisher upright and aim the nozzle at the base of the fire.
Squeeze and hold the lever to discharge the powder.
Sweep the spray at the base of the burning material, using quick side-to-side motions. (If the spray scatters the fire, move back.)
Move slowly towards the fire as the extinguisher spray pushes the fire back. Maintain a 6-foot (2 meter) distance between you and the front of the fire at all times.
Completely discharge the contents of the extinguisher and make sure the fire is completely out. Flashbacks are common with fires.
For kitchen fires on a kitchen stove, turn off the stove immediately if possible, otherwise as soon as it is safe.
If you suspect a fire had an electrical origin, shut off the electrical power, if possible, without eliminating your escape route. Do not touch electrical wires or appliances.
After you have completely discharged your extinguisher, leave the building and close all the doors behind you.

AFTER THE FIRE IS EXTINGUISHED

Do not turn the electrical power back on or plug in any appliances until the area has been cleaned up completely. It is very important to remove the powder from electrical equipment after a fire. If the powder gets wet, it can conduct electricity. (Using a dry chemical extinguisher on wet electrical equipment may be hazardous for this reason.) This may worsen an electrical leakage problem, impair the equipment’s insulation, or create an electrical shock hazard.
If the fire was on a kitchen stove:

Make sure the oven and all burners are turned off.
Clean up the powder completely before using the stove or oven. See “How to Clean After Using a Fire Extinguisher”. Ventilate the area thoroughly.

If you think the fire had an electrical origin:

Shut off the electrical power, if possible--do not touch any electrical wires or appliances.
Leave the building and close all doors behind you. Call the Fire Department and have them inspect the premises. As soon as they say it’s safe to return, ventilate the area thoroughly.
Have a licensed electrician inspect your electrical system. Do not turn the power back on or plug in any electrical equipment until the inspection has been completed.

Setup Guide

Setting up the First Alert Fire Extinguisher FE1A10GR is straightforward:

Remove the extinguisher from its packaging and ensure all safety seals are intact.
Inspect the extinguisher monthly to ensure the pressure gauge is in the green zone and there are no signs of damage or wear.
Mount the extinguisher in an easily accessible location using the provided bracket or hanger.
Familiarize yourself with the operation instructions located on the label.

HOW TO CLEAN AFTER USING A FIRE EXTINGUISHER

NOTE: The powder spray from the extinguisher may spread over a wide area, and may soil upholstery, carpets and walls.

Sweep/vacuum up as much of the powder as possible. Then use a damp cloth to wipe off the remaining agent.
If you have any questions about cleaning appliances that the agent has come into contact with, please contact the appliance manufacturer.

IF YOUR EXTINGUISHER NEEDS SERVICE

This fire extinguisher is rechargeable by a certified fire equipment dealer, regardless of how much of the content was used.
Once a year, a certified fire equipment dealer, in accordance with the service manual identified on the fire extinguisher label, should service the fire extinguisher. Please refer to your local telephone directory for a certified dealer.
Do not try to service or repair this fire extinguisher under any circumstances. Do not try to remove the nozzle or valve assem-bly. This is a pressurized device that can cause serious injury if tampered with.
If there is a problem and it is still under warranty, please see “How to Obtain Warranty Service” in the Limited Warranty.

Troubleshooting

Pressure Gauge Issue: If the pressure gauge is not in the green zone, do not use the extinguisher. Contact a professional for inspection and maintenance.
Damaged Safety Seal: Do not use the extinguisher if the safety seal is broken. Replace the extinguisher immediately.
Blockages: Ensure there are no blockages in the nozzle or hose. Clean out any debris before use.

Always follow local regulations and guidelines for fire extinguisher maintenance and inspection.

WARRANTY

BRK Brands, Inc. ("BRK") the maker of First Alert brand products, warrants that for a period of ten years from the date of purchase, this product will be free from defects in material and workmanship. BRK, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty.

Pros & Cons

Pros

Compact and Lightweight: Easy to store and handle.
Multi-Purpose: Effective against various types of fires.
Easy Operation: Simple pull-pin mechanism makes it user-friendly.
Affordable: Priced competitively compared to other fire extinguishers on the market.

Cons

Limited Capacity: May not be sufficient for larger fires.
No Recharge Option: Must be replaced after use.
Monthly Inspection Required: Regular maintenance checks are necessary to ensure functionality.

Customer Reviews

Customers have praised the First Alert Fire Extinguisher FE1A10GR for its ease of use and effectiveness in emergency situations. Many reviewers appreciate its compact size and affordability. However, some users have noted that it may not be suitable for larger fires and requires regular maintenance checks.

Search Manuals in: fire-extinguisher

Read More