First Alert Waterproof Fire Safe 2603DF Introduction

Fire Safe 2603DF is a robust storage solution designed to protect your important documents and valuables from both fire and water damage. This safe can withstand external temperatures of up to 1,550 degrees Fahrenheit for 30 minutes, ensuring that the interior remains below 350 degrees during a fire. It features a digital lock for enhanced security and is ideal for storing papers, cash, and other non-combustible items. The estimated cost of this safe is approximately $79.99.

This safe has been built with the highest manufacturing standards to ensure maximum user satisfaction. With proper care, your First Alert safe will provide peace of mind for many years to come.

PACKAGE CONTENTS

Detailed Specifications

Dimensions: 16.5 inches wide x 13.5 inches deep x 16.5 inches high
Volume: 1.24 cubic feet
Weight: Approximately 70 pounds
Fire Resistance: Up to 1550°F for 30 minutes
Water Resistance: Up to 8 feet of water for 8 hours
Lock Type: Combination Lock with dial
Interior Organization: Includes tray and hanging file folder

PROPER USE OF YOUR SAFE

First Alert Waterproof Fire Safes protect paper records and other valuable documents. UL testing shows that the interior temperature remains below 350°F for 30 minutes during a fire up to 1550° F. Your safe is protected by our Lifetime After Fire Replacement Guarantee.

Waterproof
Your new First Alert Waterproof Fire Safe is designed to help protect your valuables from fire and water. This product has been validated to be waterproof when fully submerged for up to 1 hour and is not intended for long-term underwater exposure.

Moisture Warning
We recommend that you place delicate items such as pictures or intricate jewelry into an air-tight container before storing them in your safe. Avoid placing your safe in areas of high humidity. For optimum performance, the safe should be opened and aired out for at least 20 minutes every two (2) weeks.
Firearms Warning
This safe is not designed to store medication, items with combustible content, guns or other weapons.

To clean your safe, wash off with a damp cloth and dry. Never use paint thinners or chemical solvents, as they can permanently damage the finish.

FOR YOUR PROTECTION

Always store keys away from safe, NEVER INSIDE.
Record all safe identification numbers on Safe Identification Record on page 6. a Save this manual and NEVER keep it inside the safe. DO NOT DISCARD!

IMPORTANT: ALWAYS STORE SAFE FLAT

Always store your safe in a flat, horizontal position so that the contents remain protected during a fire. Storing the unit on the sides or ends WILL NOT PROTECT CONTENTS during a fire.

always_store_safe_flat_first_alert_waterproof_fire_safe_2603df.png

Description

The First Alert Waterproof Fire Safe 2603DF is made of robust steel and has a powder-coated finish to improve corrosion resistance. The safe's inside has a tray and a hanging file folder, allowing you to properly arrange your documents and things. The combination lock assures secure access, and the safe's small size allows it to fit in a closet or under a bed without taking up too much space.
The safe's fireproof and waterproof features make it a perfect choice for safeguarding sensitive gadgets, vital papers, and other precious objects. Whether you want to protect family treasures or important business papers, the 2603DF model gives you piece of mind knowing your valuables are secure.

Opening Your Safe for the First Time

Batteries and Keys
Remove four (4) batteries and two (2) Entry Keys. They are located in the packing material. Remove them before discarding the box.
Installing Batteries

Locate the battery cover on the top of the lid.
Slide the cover off the battery compartment.
Properly insert batteries, noting the +/- directions. The LED on top of the lid will blink red and green three (3) times.
Replace cover and close the lid.

NOTE: Clean the battery contacts in the battery compartment and on the batteries before installing new batteries.

The pre-set factory code for your safe is:

installing_batteries_first_alert_waterproof_fire_safe_2603df.png

Opening & Closing Your Safe

Opening Your Safe with the Keypad

Enter the factory pre-set code 1-2-3-4-5 followed by the * key.
After properly entering the entire sequence, the green light will turn on and the locking latch will open and spring forward.
Lift the safe lid.

NOTE: If an incorrect code is entered 3 TIMES in a row, the lock will automatically shut down for 4 MINUTES before it can be opened again using the correct code.
During this delay, the key can be used to open the safe. If an incorrect code is entered, the red light will blink one time and you will hear 3 fast beeps.

Opening Your Safe with the Key

Insert the key into the lock and then turn counterclockwise (to the left).
The locking latch will open and spring forward.
Press and turn the key clockwise (to the right) to remove.
Lift the lid to open the safe.

Closing Your Safe

Close the lid, making sure that the contents do not obstruct the seal. Place the keys in a secure place away from the safe.
Push the latch back and down onto the lid clasp and snap the latch into the closed position.
Your safe is now locked.

Programming a Personal Passcode

For security reasons, it is very important that you program your own personal passcode into the digital lock. The factory code should be changed immediately.

To program your own unique four to eight (4-8) digit passcode, follow these steps:

Open the safe using the key or the five (5) digit passcode followed by the * key.
Lift the lid and locate the reset button cover.
Using a small Phillips screwdriver, remove the two screws and cover.
Press the black reset button. The LED will flash yellow.
Enter your new 4-8 digit passcode followed by the * key.
Reenter the new passcode again and press the * key.
If both entries match, the green LED will light up for 2 seconds indicating that your new passcode has been successfully programmed. If both entries do not match, the red LED will light up for 2 seconds and you will have to repeat steps 4-7
Use a Phillips screwdriver to replace the two screws and cover.

Setup Guide

Place the safe in your desired location, ensuring it is on a level surface.
Set the combination lock by following the instructions provided with the safe. Typically, this involves entering the default combination, turning the dial to a new combination, and then confirming it.
Organize your items inside using the provided tray and hanging file folder.
Ensure all doors and drawers are closed before locking the safe.

LOW BATTERY INDICATOR

Every time the keypad is activated, the system automatically checks the power level remaining in the batteries. If the power falls below a certain level, the keypad will beep and flash yellow when a key is pressed.

Safe Care and Maintenance

When properly maintained, your safe will continue to operate accurately for many years. In order to ensure optimum performance of your safe, please follow these simple precautions:

Battery Maintenance

Always purchase and use the batteries as specified by this User’s manual.
Always replace all batteries at the same time. It is recommended to replace all batteries at least once a year or sooner depending on amount of use.
Always clean the battery contacts in the battery compartment and on the batteries before installing new batteries.
Always make sure all batteries match the polarity (+ and -) signs in the open battery compartment.
If your safe will not be used for an extended period of time, it is recommended that you remove the batteries.
Always promptly remove and properly discard of all used batteries.
- Clean Hands: Never attempt to operate the digital keypad if your hands have excessive dirt, debris or liquids on them.
- Clean Safe: To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g., window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use abrasive cleansers on the safe or digital keypad

Troubleshooting

Combination Not Working: Make sure you are entering the correct combination. If the issue persists, refer to the user manual or contact customer support.
Safe Not Closing Properly: Check if there are any obstructions inside the safe. Ensure all items are properly placed and not blocking the door.
Warning Signs: Avoid exposing the safe to extreme temperatures or physical damage. Always follow the manufacturer's instructions for setup and maintenance.

First Alert Waterproof Fire Safe 2603DF Pros & Cons

Pros

Highly durable and resistant to fire and water.
Secure combination lock for added security.
Compact size for easy placement.
Includes interior organization tools like trays and hanging file folders.
Affordable price point compared to other fire safes on the market.

Cons

Limited storage space compared to larger safes.
No digital lock option available; only combination lock.
Heavy weight makes it difficult to move once placed.
No alarm system integrated into the safe.

Customer Reviews

Customers have praised the First Alert Waterproof Fire Safe 2603DF for its reliability and robust build quality. Many reviewers have appreciated its ability to withstand extreme conditions, providing peace of mind knowing their valuables are protected. However, some users have noted that the safe's weight makes it challenging to move around after initial placement.

Common complaints include limited storage space and the lack of a digital lock option. Despite these minor drawbacks, overall customer satisfaction remains high due to the safe's performance under various conditions.

WARRANTY

BRK Brands, Inc., (“BRK”) warrants that for a period of five (5) years from the date of purchase, this product will be free from defects in material and workmanship. BRK, at its sole option, will repair or replace this product or any component of the product found to be defective during the warranty period.

Search Manuals in: fire-safe

Read More