Introduction

Introducing the hqua HP Floating Fountain HQUA-FS01, a beautiful and elegant addition to any outdoor body of water. This floating fountain is perfect for use in ponds, lakes, and other water features. With its high-quality construction and energy-efficient design, the HQUA-FS01 is a reliable and attractive choice for any home or business. The estimated price of the product is around $300 to $400 and it is now available for purchase.

General Information

System Components

Floating Fountain Pump HQUA-FS01P
1. Easy to Install
2. Asynchronous Water Cooled Motor, Stainless Steel Shaft Bearing.
3. Energy Efficient, Fully Sealed Motor. 5.8A, 620W 100-120V,
4. Stainless Steel Suction Screen & Body.
5. Operates in as least 40” of Water Depth.
6. Provides aeration for ponds up to 1/4 acre, 6’ deep. Larger ponds will require multiple fountains or Our Aeration System, SWA20 PAS10 PAS20.
Float Plate HQUA-FS01F
1. Durable HDPE materials made with excellent weather resistance.
2. Great air tightness, providing enough buoyancy to support the pump body
Electric Parts
1. 100’ Weatherproof Power Cord. 4-pin. Durable and Reliable.
2. Weatherproof connection electric box. Capacitor Contained.
3. Standard 3-pin plug.

Other Accessories

Special nozzle design for spraying. Crown Pattern. 3 Stage beautiful fountain.
Different stainless steel accessories for assembling.
Stakes, cable, carabiners, cable clamps for mooring to secure the fountain.

HQUA Specification

ItemName

Max

Amps

Volts

Power

Cord

Max Pond

Size

Minimum

Depth

FS01

1/2

5.8

110V

100’

1/2 Acres

40”

Pattern Size: 7’×30’

Prepping for the installation

Tool Required

Hammer
Shovel
Boat/Raft/Swimsuit
Phillips screwdriver
3/16” Allen Wrench
Coast Guard-approved life jacket

Instructions

Ensure you have a close power for the connection. If you don’t, we always recommend to hire a licensed electrician to properly run power down to this unit.
Mount the Connection Box in a fixed position next to the power source.
Ensure you have a good spot to moor the stake.

Installation of hqua HP Floating Fountain

We have already assembled the two blocks for you. Please refer that and finish the whole assembling of the float plate.
Use the two carabiners to fix the rope on the float plate
Lay the float plate on the ground with the HQUA logo facing up.
Place the fountain pump into the center of the float. Make sure the wire is covered by the float.
Place all the accessories according to the order in Fig. 3. First is the “puzzle plate”, and the gasket, thread fastener, the nozzle, the last is another fastener.
Lift the float straight up and ensure the cord is under the float. Put it into the water edge.
Fix the other side of the rope with the stakes by the cable clamps. And fix the stake. You could adjust the cable clamps later to moor the float later.
Put the whole fountain assembly into the water and adjust rope by the carabiners or use a boat to help the fountain stay at your ideal position in your pond.
Grab the ropes when you adjust the cable clamps, loose one side and through the hole of the stake. Loose the other side of the cable clamps and drag it until you think the remain length is enough. Do all the moves roll over again to fix it on the stake.
The wires and two cables would work as a triangle.
Connect the power supply with the outlet timer and you are ready to go.

Description

The hqua HP Floating Fountain HQUA-FS01 is made of durable materials, including a stainless steel frame and a hard-wearing plastic float. The fountain's pump is designed to be energy-efficient, using only 110 watts of power. It can shoot water up to 10 feet in the air, creating a stunning display of water and light. The fountain is also equipped with LED lights, which can be adjusted to a variety of colors and patterns. The HQUA-FS01 is easy to assemble and comes with everything you need to get it up and running, including a pump, a float, and a power cord.

Setup Guide

Setting up the hqua HP Floating Fountain HQUA-FS01 is a simple process. First, find a location in your pond or lake where the fountain will be visible and where the water is at least 2 feet deep. Next, assemble the fountain by attaching the pump to the float and connecting the power cord. Place the float in the water and plug in the pump. The fountain will begin to operate immediately, shooting water into the air. To adjust the height of the water stream, simply twist the nozzle on the top of the pump. To change the color of the LED lights, use the remote control that is included with the fountain.

Maintenance & Winter Storage

Maintenance

Always unplug system before performing any maintenance or troubleshooting.
Always unplug system and refer servicing to a qualified electrician when: cord is damaged or frayed, compressor, power control, compressor fan, or other electrical components are producing unusual noises or odors.
Periodically clean fountain intake screen of debris, algae and/or aquatic weeds. Check that monthly to extend the lifetime of the pump.

Winter Removal & Storage

Remove the fountain from the pond before ice begins to form.
Clean or power wash any debris on the unit before storing.

Winter Removal & Storage

Remove the fountain from the pond before ice begins to form.
Clean or power wash any debris on the unit before storing.

Spring Installation Inspection: Before re-installing the fountain and lights in the spring, check the condition of the power cord.

HQUA HP Floating Fountain HQUA-FS01 Troubleshooting

If the fountain is not working, first check to make sure that it is properly assembled and that the power cord is plugged in. If the pump is not getting enough water, it may overheat and shut off. Make sure that the float is in at least 2 feet of water. If the fountain is still not working, contact hqua's customer support team for assistance.

IF THEPUMP IS NOT WORKING:
Check	Possible Reason		Solution
Check for power.	Pump is not receiving power.		Check the power outlet or electrical cord.
GFCI circuit tripped.	Damage to electrical cord or low voltage from power supply.		Contact a qualified electrician for professional assistance.
GFCI circuit not tripped.	GFCI malfunction.
Outlet timer is not working.	Not working hours or defective.		Test or replace a new one.
Not enough water in the pond.	The water depth should not lower than 40”.		Stop the unit until you get enough water depth.
Plugged.	Intake Plugged or Fountain impeller stuck.		Clean the intake. Contact HQUA if it still cannot be fixed.
IF THE SPRAYING IS VERY SMALL:
ISSUE		Solution
Intake Plugged or Fountain impeller stuck.		Clean the intake. Contact HQUA if it still cannot be fixed.
Not enough water in the pond.		The water depth should not lower than 40”.
Debris caught in nozzle hole or defective.		Remove nozzle, clean, replace
IF THE PUMP STARTSAND STOPS FREQUENTLY:
ISSUE		Solution
Intake Plugged or Fountain impeller stuck.		Clean the intake. Contact HQUA if it still cannot be fixed.
Not enough water in the pond.		The water depth should not lower than 40”.
IF SPRAYING RAISE AND LOWER:
ISSUE		Solution
Not enough water in the pond.		The water depth should not lower than 40”.
The waterline is too high.		Check fountain float for water, replace if any
IF THE PUMP STARTSAND STOPS FREQUENTLY:
ISSUE		Solution
Intake Plugged or Fountain impeller stuck.		Clean the intake. Contac tHQUA if it still cannot be fixed.
Not enough water in the pond.		The water depth should not lower than 40”.

Warranty for HQUA FS01 Floating Fountain

HQUA warrants that the FS01 Floating Fountain is free from defects of material and workmanship for a period of 2 years from the date of purchase. During this period, HQUA will repair or replace, at its option, any defective HQUA UV chamber. Please return the defective part to your dealer for claim.

Pros & Cons

Pros

Durable construction
Energy-efficient design
Adjustable water stream
LED lights with remote control
Easy to assemble

Cons

May not be suitable for very shallow water
Remote control range may be limited

Customer Reviews about Fountain HQUA-FS01

Customers who have purchased the hqua HP Floating Fountain HQUA-FS01 give it high marks for its durability, ease of use, and attractive design. Some reviewers note that the fountain is easy to assemble and that the LED lights add a nice touch. However, some reviewers mention that the remote control range could be better and that the fountain may not be suitable for very shallow water.

Search Manuals in: floating-fountain

Read More