Introduction of Garmin 65W Dash Cam

Garmin 65W Dash Cam, a trusted name in navigation and wearable technology, has released the 65W Dash Cam. This compact and easy-to-use dash cam offers crisp 1440p video resolution, a wide 180-degree field of view, and voice control. With an estimated price range of $200 - $250 and a launch date set for March 2023, the Garmin 65W Dash Cam is an excellent investment for any driver concerned about safety and security on the road.

Description

The 65W Dash Cam boasts several impressive features, including

1440p HD video recording
180-degree field of view
Voice control
Parking mode
G-sensor for incident detection
Integrated GPS for location and speed data
Compact and discreet design
Simple installation

Specifications

Specification	Value
Operating temperature range	From -20° to 55°C (from -4° to 131°F)
Charging temperature range	From 0° to 45°C (from 32° to 113°F)
Memory card	Class 10 or higher microSDHC from 4 to 64 GB
Garmin Dash Cam 45 wireless frequencies	2.4 GHz @ 9 dBm
Garmin Dash Cam 54/55/65W wireless frequencies	2.4 GHz @ 8 dBm

Device Overview

Installing the Memory Card

The camera requires a microSD™ or microSDHC memory card of up to 64GB with a speed rating of class 10 or higher. You can use the included memory card, or you can purchase a compatible memory card from an electronics supplier.

Insert the memory card 1 into the slot 2 .
Press it in until it clicks.

Formatting the Memory Card
The camera requires a memory card formatted using the FAT32 file system. You can use the camera to format your card using this file system.
You should format your memory card at least one time every 6 months to help extend the useful life of the memory card. You must also format a brand new memory card if it is not formatted using the FAT32 file system.
NOTE: Formatting the memory card deletes all videos, photos, and data on the card.

Connect the camera to power.
Select Settings > Camera > Format Card.
Keep the camera connected to power until the formatting is complete. When formatting is complete, the camera displays a message and begins recording.

Removing the Memory Card
NOTICE
Removing the memory card while the device is turned on can result in a loss of data or damage to the device.

Turn off the device.
Press the card in until it clicks.
Release the card. The card ejects from the slot.

Installing the Mount onto Your Windshield
NOTICE
The adhesive mount is extremely difficult to remove after it is installed. You should carefully consider the mounting location before you install the mount.
Before you can install the adhesive mount onto your windshield, the ambient temperature must be from 21° to 38°C (from 70° to 100°F).
TIP: You can connect the device to power and hold the device in the preferred mounting location to check the camera's field of view at that location.

Clean the windshield using water or alcohol, and a lint-free cloth. The windshield must be free of dust, wax, oils, or coatings.
Remove the protective film from the mount adhesive.
Position the mount over the mounting location.
TIP: The adhesive is extremely sticky. Do not touch the adhesive to the windshield until the mount is properly positioned and aligned.
Press the mount firmly onto the windshield, and maintain pressure for 30 seconds.
Pull the camera and mount away from the windshield. The metal disc remains attached to the windshield.
Using your finger, press firmly on the disc for 30 seconds. This helps to ensure the disc adhesive has proper contact with the windshield.
Wait 24 hours before installing the Garmin Dash Cam . It takes 24 hours for the adhesive to bond properly to the windshield.

Installing and Setting Up the Garmin Dash Cam

NOTICE
Before installing the Garmin Dash Cam , you must install the mount and allow the adhesive to bond to the windshield for 24 hours. Failure to allow adequate bonding time may cause the mount to detach from the windshield, which could result in damage to the product or mount.

Place the camera and mount onto the metal disc.
Plug the vehicle power cable into the USB port on the device.
Route the power cable to your vehicle power outlet.The included vehicle power cable is designed to be routed out of sight. It is long enough to route around the windshield in most vehicles, and you can hide the thin cable along or behind the trim or headliner.
Plug the other end of the vehicle power cable into a power outlet in your vehicle.
If necessary, turn on the vehicle ignition switch to provide power to the power outlet in your vehicle. The device turns on.
Follow the on-screen instructions to complete the initial device setup. The camera view appears.
Adjust the position of the camera to capture the desired field of view.

Setting the Camera Placement
You can mount the device in the left, center, or right of your windshield. For the best performance, you should set the Camera Placement option to indicate the location of your device in the vehicle.

Select Settings > Driver Assistance > Camera Placement.
Select Horizontal Placement, and select the horizontal placement of your camera.
Select Vehicle Height.
Select an option
- If you are driving a large vehicle, like a full size van or truck, select Tall.
- If you are driving a car, select Normal.

Turning On the Device Manually
NOTE: When the device is connected to an ignition-switched power outlet, it turns on automatically when you turn on the vehicle.

Select POWER BUTTON .
The device turns on.

Turning Off the Device Manually
NOTE: When the device is connected to an ignition-switched power outlet, it turns off automatically when you turn off the vehicle.

Hold the POWER BUTTON for 3 seconds.
The device turns off.

Dash Cam Recording

NOTICE
Some jurisdictions regulate or prohibit use of this device. It is your responsibility to know and comply with applicable laws and rights to privacy in jurisdictions where you plan to use this device.
The dash cam records video to the camera memory card (Installing the Memory Card, page 1). By default, the device immediately starts recording video when it turns on, and it continues recording until it is turned off. If the memory card is full, the device automatically deletes the oldest unsaved video to create space for new video.
When the option to promptly delete unsaved video is enabled, the device continually deletes unsaved video more than three minutes old and deletes all unsaved video each time it is powered off. This feature is available only for specific regions and is enabled by default for some of those regions. When the camera is set to a supported region, you can enable or disable this feature in the camera settings (Camera Settings, page 6).
You can save a video recording to prevent it from being overwritten or deleted.

Saving a Video Recording
By default, the device uses a sensor to detect a possible incident and automatically saves video footage before, during, and after the detected event. You can also save video files manually at any time.

Hold .
The device saves the video footage before, during, and after you hold .
The memory card has limited storage. After you save a video recording, you should transfer the recording to your computer (Videos and Photos on Your Computer, page 4) or to your smartphone (Editing and Sharing a Video, page 4).

Event Detection
By default, the device uses a sensor to detect possible incidents and saves video footage automatically before, during, and after the detected event. The video footage is stamped with the time, date, and location of the event.

Turning Audio Recording On or Off

NOTICE
Some jurisdictions may prohibit recording audio in the vehicle or may require that all passengers have knowledge of the recording and provide consent before you record audio in the vehicle. It is your responsibility to know and follow all laws and restrictions for your jurisdiction. The device can record audio using the integrated microphone while recording video. You can turn audio recording on or off at any time.
Select Settings > Camera > Record Audio.
Taking a Photo

From the viewfinder, select .
The device saves the photo to the memory card.

Travelapse
The Travelapse feature captures a fast-motion video of your trip, which allows you to share a short video of all the places you traveled. Recording Travelapse does not stop dash cam recording.
NOTE: Travelapse recording is not available when the option to promptly delete unsaved video is enabled (Camera Settings, page 6).
Recording a Travelapse Video
You can manually start and stop Travelapse recording at any time using the main menu or voice commands.
NOTE: The device continues to record regular dash cam footage while recording a Travelapse video.

To start recording a Travelapse video, select an option:
- From the main menu, select Travelapse > Start.
- Say OK, Garmin, Start Travelapse.
To stop Travelapse recording, select an option:
- From the main menu, select Travelapse > Stop.
- Say OK, Garmin, Stop Travelapse.

Recording Videos While Parked

NOTICE
Due to privacy regulations, this feature is not available in all areas. It is your responsibility to know and comply with applicable laws and rights to privacy in your jurisdiction.
Before you can record videos while parked, you must connect your camera to the Dash Cam parking mode cable accessory (Parking Mode Cable Wiring Diagram, page 3).
The parked video recording feature allows the camera to record video automatically while your vehicle is parked.
Select > Settings > Camera > Record While Parked.
When you turn off your vehicle, the camera enters parked recording mode and automatically records video each time the camera sensor detects motion.
Parking Mode Cable Wiring Diagram

garmin_65w_dash_cam-parking_mode_cable_wiring_diagram.png

Connecting the Parking Mode Cable Accessory to the Power

CAUTION
Garmin strongly recommends having an experienced installer with the proper knowledge of electrical systems install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can cause bodily injury.

Route the parking mode cable accessory to a location in the vehicle with constant power, switched power, and a ground connection.
Connect the BATT wire to a constant power source.
Connect the ACC wire to a switched power source.
Connect the GND wire to the bare metal of the vehicle's chassis using an existing bolt or screw.
Plug the parking mode cable accessory into the USB port on the camera.

Viewing Videos and Pictures
NOTE: The device stops recording and alerts are disabled while viewing videos or pictures.

Select > Gallery.
Select an option
NOTE: Unsaved videos and Travelapse videos are not available when the option to promptly delete unsaved video is enabled (Camera Settings, page 6).
- To view videos you saved, select Saved Videos.
- To view parked videos you saved, select Parked Videos.
- To view saved photos, select Pictures.
- To view Travelapse videos, select Travelapse.
- To view recent video footage that has not been saved, select Unsaved Videos.
Select a video or photo.

Saving Unsaved Video Footage
You can view your unsaved temporary footage in the gallery and save video clips from the unsaved footage. This feature is not available when the option to promptly delete unsaved video is enabled (Camera Settings, page 6).

Select > Gallery > Unsaved Videos. Select a day and time.
The unsaved video for that timeframe starts playing.
Hold or to move backward or forward through the video.
While you hold the button, the device increases the speed at which it moves through the video. The timestamp appears in the lower-left corner of the video.
When you find the video footage you want to save, press > Save. The device saves a three-minute video clip.

Deleting a Video or Photo

While viewing a video, select > Delete > Yes.
While viewing a photo, select > Yes.

Garmin VIR App

The free Garmin VIRB app allows you to view and share recorded dash cam videos and photos on your smartphone. To download the Garmin VIRB app or for more information, go to garmin.com/VIRBapp.
Viewing Videos and Photos in the Garmin VIRB App

From the app store on your mobile device, install the Garmin VIRB app. For more information, go to garmin.com/VIRBapp.
On your Garmin Dash Cam device, select Gallery > Share Gallery. On your smartphone, open the Garmin VIRB app.
The app searches for your Garmin Dash Cam device and connects automatically.
If necessary, enter the wi-fi password that appears on your Garmin Dash Cam screen.
On your smartphone, select a video or photo to view or share it.

Garmin VIRB App Gallery

Editing and Sharing a Video

From the Garmin VIRB app gallery, select a video.
Select an option
- If you are using an Apple device, select .
- If you are using a device with Android™, select .
Use the sliders to trim the video clip and select the section of the video to share.
When you are finished editing the video, select Next. The app processes the video. This may take a while depending on the length of the video.
After the app finishes processing the video, select an option:
- To save the video to your mobile device, select
- To share the video to a social network using an Apple device, select .
- To share the video to a social network using a device with Android, select .

Videos and Photos on Your Computer
NOTE: Some media players might not support high-resolution playback.
Videos and photos are stored in the DCIM directory on the camera memory card. Videos are stored in MP4 file format, and photos are stored in JPG format. You can view and transfer photos and videos by connecting the memory card or the device to your computer (Connecting the Device to Your Computer, page 4). The videos and photos are sorted into several folders.
NOTE: Unsaved videos and Travelapse videos are not available when the option to promptly delete unsaved video is enabled (Camera Settings, page 6).

100EVENT: Contains videos saved automatically when the device detects an incident.
101PHOTO: Contains photos.
102SAVED: Contains videos saved manually by the user.
103PARKM: Contains videos saved while parked
104TLPSE: Contains Travelapse videos.
105UNSVD: Contains unsaved video footage. The device overwrites the oldest unsaved video when the storage space for unsaved videos is full.

Connecting the Device to Your Computer

You can view videos and photos on your computer using a micro-USB cable.
Plug the small end of the micro-USB cable into the port on the device.
Plug the larger end of the micro-USB cable into a port on your computer.

Depending on your computer operating system, the device appears as either a removable drive or a removable volume.

Driver Awareness Features and Alerts

Your camera provides features that can help encourage more attentive driving, even when you are driving in a familiar area. The device plays an audible tone or message and displays information for each alert. You can enable or disable the audible tone for some types of driver alerts.

Forward collision warning: The device alerts you when it detects that you are not maintaining a safe distance between your vehicle and the vehicle in front of you.
Lane departure warning: The device alerts you when it detects you may be crossing a lane boundary unintentionally.
Go alert: The device plays a tone and displays an alert when stopped traffic starts moving.
Speed cameras: The device plays a tone and displays the speed limit and the distance to the speed camera.
Red light cameras: The device plays a tone and displays the distance to the red light camera.

Forward Collision Warning System

WARNING
The forward collision warning system (FCWS) feature is for information only and does not replace your responsibility to observe all road and driving conditions, abide by all traffic regulations, and use safe driving judgment at all times. The FCWS relies on the camera to provide a warning of upcoming vehicles and, as a result, may have limited functionality in low visibility conditions.
NOTE: This feature is not available in all areas or for all product models.
The FCWS feature alerts you when the device detects that you are not maintaining a safe distance between your vehicle and the vehicle in front of you. The device determines your vehicle speed using GPS, and it calculates an estimated safe following distance based on your speed. The FCWS activates automatically when your vehicle speed exceeds 48 km/hr (30 mph). When the device detects that you are too close to the vehicle ahead of you, the device plays an audible alert, and a warning appears on the screen.

Forward Collision Warning System Performance Tips
Several factors affect the performance of the forward collision warning system (FCWS). Some conditions may prevent the FCWS feature from detecting a vehicle ahead of you.

The FCWS feature activates only when your vehicle speed exceeds 50 km/h (30 mph).
The FCWS feature may not detect a vehicle ahead of you when the camera's view of the vehicle is obscured by rain, fog, snow, sun or headlight glare, or darkness.
The FCWS feature may not function properly if the camera is incorrectly aligned (Setting the Camera Placement, page 2).
The FCWS feature may not detect vehicles greater than 40 m (130 ft.) away or closer than 5 m (16 ft.).
The FCWS feature may not function properly if the camera placement settings do not correctly indicate your vehicle height or the placement of your device in the vehicle (Setting the Camera Placement, page 2).

Lane Departure Warning System

WARNING
The lane departure warning system (LDWS) feature is for information only and does not replace your responsibility to observe all road and driving conditions, abide by all traffic regulations, and use safe driving judgment at all times. The LDWS relies on the camera to provide warnings for lane markers and, as a result, may have limited functionality in low visibility conditions.
The LDWS feature alerts you when the device detects you may be crossing a lane boundary unintentionally. For example, the device alerts you if you cross some solid-painted lane boundaries or cross into an oncoming traffic lane. The LDWS feature provides alerts only when your vehicle speed exceeds 64 km/h (40 mph). The alert appears on the left or right side of the screen to indicate which lane boundary you crossed.

NOTE: For the best LDWS performance, you should set the Camera Placement option to indicate the location of your device in the vehicle.
Lane Departure Warning Performance Tips
Several factors affect the performance of the lane departure warning system (LDWS). Some conditions may prevent the LDWS feature from detecting lane departures.

The LDWS feature provides alerts only when your vehicle speed exceeds 65 km/h (40 mph).
The LDWS feature does not provide alerts on certain types of roads, such as highway ramps or merging lanes.
The LDWS feature may not function properly if the camera is incorrectly aligned.
The LDWS feature may not function properly if the camera placement settings do not correctly indicate your vehicle height or the placement of your device in the vehicle (Setting the Camera Placement, page 2).
The LDWS feature requires a clear, continuous view of the lane divider lines.
- Lane departures may not be detected when divider lines are obscured by rain, fog, snow, extreme shadows, sun or headlight glare, road construction, or any other visual obstruction.
- Lane departures may not be detected if lane divider lines are misaligned, missing, or heavily worn.
The LDWS feature may not detect lane departures on extremely wide, narrow, or winding roads.

Go Alert
The go alert plays a tone and displays an alert when stopped traffic ahead of your vehicle starts moving again. This alert appears only after the vehicle ahead has moved a substantial distance and your vehicle has remained stopped. This can be useful at stop lights or in traffic delays. This feature uses the dash camera to detect the stopped or moving vehicle and requires a clear view of the road.

Red Light and Speed Cameras

NOTICE
Garmin is not responsible for the accuracy of or the consequences of using a red light or speed camera database.
NOTE: This feature is not available for all regions or product models.
Information about red light and speed camera locations is available in some areas for some product models. The device alerts you when you approach a reported speed or red light camera.

You can use the Garmin Express software (garmin.com/express) to update the camera database stored on your device. You should update your device frequently to receive the most up-to-date camera information.

Voice Control
NOTE: The voice control feature is not available for the 45 product model.
The voice control feature allows you to control your camera by saying words and commands.
NOTE: The voice control feature is not available for all languages. You can use this feature while the interface is set to an unsupported language, but you must speak the commands in English.
Commands
NOTE: The voice control feature is not available for the 45 product model.

Say OK, Garmin to activate the voice control feature. The camera plays a tone and starts listening for a command.
Say a command
- To save a video, say Save Video.
- To take a picture, say Take a Picture.
- To record audio with the video, say Record Audio.
- To record video without audio, say Stop Audio.
- To start Travelapse, say Start Travelapse.
- To stop Travelapse, say Stop Travelapse.

The camera plays a tone when it recognizes your command.

Turning Voice Control On or Off
Select > Voice Control > Settings > Disable.
Voice Control Tips

Speak in a normal voice directed at the device.
Reduce background noise to increase the accuracy of the voice recognition.
Before each command, say OK, Garmin.
Listen for a tone to confirm that the camera successfully recognized a command.

Settings

Camera Settings Select > Settings > Camera.
Resolution: Adjusts the video resolution.
Event Detection: Turns on and off event detection (Event Detection, page 2).
Record Audio: Turns on and off audio recording (Turning Audio Recording On or Off, page 2).
Data Overlay: Adjusts the type of data displayed on videos and pictures.
Unsaved Videos: Determines when the device deletes unsaved video footage. When the Delete When Full option is selected, the device deletes the oldest unsaved video when the memory card storage is full. When the Promptly Delete option is selected, the device continually deletes unsaved video more than three minutes old and deletes all unsaved video each time it is powered off. This is useful to help protect data privacy. While the Promptly Delete option is selected, you cannot record Travelapse videos or view unsaved video in the gallery.
Record After Power Loss: Sets the amount of time that the device continues to record video after power is turned off.
Record While Parked: Allows the camera to record video while the vehicle is parked and turned off, and sets the amount of time the camera remains active while parked. This feature is only available when the Dash Cam parking mode cable accessory is connected to the camera (Recording Videos While Parked, page 3).

NOTICE
Due to privacy regulations, this feature is not available in all areas. It is your responsibility to know and comply with applicable laws and rights to privacy in your jurisdiction.
Format Card: Formats the memory card and deletes all videos, photos, and data on the card.
Video Resolution Settings
You can change the video resolution on your camera. Resolution is the height of the video in pixels. Higher-resolution video settings require more memory card space than lower-resolution settings.
Select Settings > Camera > Resolution.

1440p, 30fps: Records video in 1440p resolution at 30 frames per second.
NOTE: This option is available only for the 54/55/65W product models.
1080p, 60fps: Records video in 1080p resolution at 60 frames per second.
NOTE: This option is available only for the Garmin Dash Cam 54/55 product models.
1080p, 30fps, HDR: Records video in 1080p resolution at 30 frames per second using high dynamic range (HDR) imaging. HDR imaging records multiple exposure levels for each frame and can improve video clarity in high-contrast or low-light conditions.
NOTE: This option is available only for the Garmin Dash Cam 54/55 product models.
1080p, 30fps: Records video in 1080p resolution at 30 frames per second.
720p, 30fps: Records video in 720p resolution at 30 frames per second.

Driver Assistance Settings
Select > Settings > Driver Assistance.

Camera Placement: Allows you to indicate the placement of your device in the vehicle (Setting the Camera Placement, page 2).
Forward Collision: Adjusts the sensitivity of the FCWS feature.
Go Alert: Turns on or off the go alert display and audible alerts when traffic starts moving (Go Alert, page 5).
Lane Departure: Adjusts the lane boundary settings (Lane Departure Warning System, page 5).
Proximity Alerts: Adjusts the audible proximity alerts.

Proximity Alerts Settings
The camera plays a tone and shows an on-screen alert when you approach proximity points, such as a speed camera or red-light camera. To use proximity alerts, you must have proximity point data on your device, such as a speed camera or red-light camera database. You can customize the behavior of proximity alerts.
NOTE: This feature is not available in all areas.
Select Settings > Driver Assistance > Proximity Alerts.

Audio: Sets the style of alert that plays when you approach proximity points.
Alerts: Sets the type of proximity points for which alerts are played.
Delete Files: Allows you to delete proximity point data.
NOTE: This option is provided primarily for commercial distribution and deployment applications. Most users should not delete proximity point data. Deleted proximity point data cannot be restored, and updates are not available for a deleted database. If your proximity point database is out of date, you should update it instead of deleting it.
Update: Shows instructions for updating the proximity point data on your device.

System Settings
Select > Settings > System.

Volume: Adjusts the volume of the camera alerts and video playback.
Brightness: Adjusts the viewfinder display brightness.
Color Mode: Allows you to select day or night color mode. If you select the Auto option, the device automatically switches to day or night colors based on the time of day.
Display Timeout: Allows you to set the screen to stay on while the camera is receiving power or turn off after one minute of idle time. The camera continues to record while the screen is off, and the recording LED remains red to indicate the device is recording.
Setup: Allows you to set the units of measure, time, and language, and restore them to their default values.
About: Displays the camera name, software version number, the unit ID number, and information about several other software features.
Regulatory: Displays regulatory and compliance information.

Device Setup
Select > Settings > System > Setup.

Units: Sets the unit of measure used for distances.
Time: Sets the time, date, and format for the time stamp.
Language: Sets all on-screen text to the selected language.
Restore: Restores all settings to the factory default values and unpairs the camera from the Garmin VIRB app. This option does not delete recorded photos and videos. To delete all photos and videos on your memory card, you can format the memory card (Formatting the Memory Card, page 1).

Device Information

Cleaning the Camera Lens

NOTICE
Avoid chemical cleaners and solvents that can damage plastic components. You should clean the camera lens regularly to improve the quality of recorded video.

Wipe the lens with a non-scratch lens cloth, optionally dampened with isopropyl alcohol.
Allow the lens to air dry.

Support and Updates

Garmin Express (garmin.com/express) provides easy access to these services for Garmin devices.
Product Registration
Product manuals
Software updates

Setting Up Garmin Express
Viewing E-Label Regulatory and Compliance Information

From the settings menu, scroll to the bottom of the menu.
Select System.
Select Regulatory.

Restarting the Device
You can restart your device if it stops functioning. Hold the power key for 12 seconds.

Troubleshooting

Here are some common issues and solutions for the Garmin Dash Cam

Issue: Dashcam won't turn on
Solution: Check the power cable connection and ensure the dash cam is properly charged.
Issue: The video quality is poor
Solution: Adjust the recording resolution and ensure the windshield is clean.
Issue: Dashcam is not saving videos
Solution: Check the memory card for errors and format it if necessary.
Issue: GPS is not working
Solution: Make sure the dash cam is in an open area with a clear view of the sky.
Issue: Dashcam is overheating
Solution: Limit the use of parking mode and ensure proper ventilation around the device.

My camera feels warm while it is operating
It is normal for the camera to feel warm during typical use, especially while it is recording high-resolution video or transmitting a Wi‑Fi® signal.
My memory card has degraded and needs to be replaced
All microSD memory cards wear out after they are overwritten a large number of times. Periodically formatting the card can extend the useful life and improve performance. Because the dash camera records continuously, you may need to replace the memory card periodically (Installing the Memory Card, page 1). Your device detects memory card errors automatically and alerts you when it is time to format or replace your memory card.

You can take these actions to help extend the useful life of the memory card.
Format the memory card at least one time every six months (Formatting the Memory Card, page 1).
If the device displays a memory card error alert, first try formatting the memory card (Formatting the Memory Card, page 1) and then, if necessary, replace the memory card (Installing the Memory Card, page 1).
Turn off the device when your vehicle is not in use.
If your device is not connected to an ignition-switched vehicle power outlet, you should turn off the device when your vehicle is not in use to prevent the dash camera from recording unneeded footage. Use a memory card with a higher storage capacity.
Because higher-capacity memory cards are overwritten less frequently, they usually last longer.
Use a high-quality memory card with a speed rating of class 10 or higher.
Purchase your replacement memory card from a high-quality manufacturer and a reputable vendor.

My video recordings are blurry

Clean the camera lens (Cleaning the Camera Lens, page 7).
Clean the windshield in front of the camera.
Verify the area of the windshield in front of the camera is cleared by the windshield wipers, and move the device, if necessary.

My video recordings are choppy or incomplete

For the best camera and video results, use a high-quality memory card with a speed rating of class 10 or higher. A slower memory card may not record video quickly enough.
If you are viewing videos on your smartphone using a wireless connection to the camera, try viewing them in another location with less wireless interference, or try transferring videos to the smartphone (Editing and Sharing a Video, page 4).
Transfer important recordings to a computer or smartphone, and format the memory card (Formatting the Memory Card, page 1).
If the device displays a memory card error alert, first try formatting the memory card (Formatting the Memory Card, page 1) and then, if necessary, replace the memory card (Installing the Memory Card, page 1).
Update your device to the latest software (Support and Updates, page 7).

Pros & Cons of Garmin Dash Cam

Pros

High-quality video recording
Wide field of view
Easy to install and use
Integrated GPS
Voice control

Cons

Expensive compared to other dashcams
Limited parking mode time
No screen for real-time monitoring
No built-in battery

Customer Reviews about Garmin 65W Dash Cam

Customers have praised the Garmin 65W Dash Cam for its high-quality video, easy installation, and convenient voice control. However, some have criticized its high price point, limited parking mode time, and lack of a built-in battery. Overall, the Garmin Dash Cam is a reliable and high-quality dash cam that offers excellent features and performance for those willing to invest in it.

Search Manuals in: garmin-45-54-55-65w

Read More