Evenflo Go Time Sport LX Booster Seat Introduction

The Evenflo Go Time Sport LX Booster Seat is designed to provide safety and comfort for growing children, accommodating kids from 40 to 110 pounds. This versatile booster seat features a high-back design that can be converted to a backless option as your child grows, ensuring longevity and adaptability. With its easy installation and adjustable features, it aims to enhance the travel experience for families. The cost of the Evenflo Go Time Sport LX Booster Seat is approximately $89.99.

Detailed Specifications

Weight Range: 40-110 pounds
Height Range: 38-57 inches
Usage Modes: Backless and High-Back Booster
Material: Durable plastic and comfortable cushioning
Installation: Easy belt routing and no installation required
Portability: Lightweight design for easy transfer between vehicles
Safety Standards: Meets or exceeds all U.S. federal safety standards

Keep instructions for future use.

With Backrest
- 18 to 54.4 kg (40 to 120 lbs)
- 112 to 145 cm (44 to 57 in.)
  - At least 4 years old
Without Backrest
- 18 to 54.4 kg (40 to 120 lbs)
- 112 to 145 cm (44 to 57 in.)
  - At least 4 years old

WARNING!

To reduce the risk of serious injury or death, read this owner’s manual and product warning labels prior to installing and using this Booster Seat.

Child Requirements

WARNING! DEAINJURTH or SERIOUSY can occur.

This Booster Seat is designed for use by children in booster mode only. To use this Booster Seat properly, children MUST meet the size and age requirements below.
Please review any applicable local, state or provincial laws related to child passenger safety before installing and using this Booster Seat.

With Backrest

18 to 54.4 kg (40 to 120 lbs)
112 to 145 cm (44 to 57 in.)
Child is at least four years old
The tops of the child’s ears are below the top of the Booster Seat headrest.

Without Backrest

18 to 54.4 kg (40 to 120 lbs)
112 to 145 cm (44 to 57 in.)
Child is at least four years old
The tops of the child’s ears are below the top of the vehicle headrest.

IMPORTANT: Once your child exceeds any of the size requirements above, you MUST discontinue use of this seat. Your child may be ready for use of the vehicle belt system only at this time.

WARNING! DEATH or SERIOUS INJURY can occur.

Airbag Warnings

DO NOT use this Booster Seat in the front seat of a vehicle equipped with an active air bag. Air bags may cause serious injury or death to children 12 and under. If your vehicle has an air bag, refer to your vehicle owner’s manual for Booster Seat installation.
If the rear seat of your vehicle is equipped with side air bags, refer to the following information for proper usage:
Vehicles built prior to the 2002 model year: DO NOT use this Booster Seat in a vehicle seating position equipped with a side air bag unless authorized by the vehicle manufacturer.
Model year 2002 and newer vehicles: Refer to your vehicle owner’s manual before placing this Booster Seat in a seating position equipped with a side air bag.
DO NOT place any objects between the Booster Seat and the side air bag, as an expanding air bag may cause the items to strike your child.

The forward-facing rear seat is the safest place for children 12 and under.

airbag_warnings_evenflo_go_time_sport_lx_booster_seat.png

General Warnings

Failure to follow each of the following instructions and product warning labels can result in your child striking the vehicle’s interior during a sudden stop or crash, potentially resulting in serious injury or death. These instructions and the instructions in your vehicle owner’s manual must be followed carefully. If there is a conflict between the two, the vehicle owner’s manual regarding Booster Seat installation must be followed.
NEVER leave child unattended.
In addition to the height and weight requirements, your child must be at least four years old to use this Booster Seat. See page 18 for more guidance.

Location Warnings

According to statistics, children are safer when properly restrained in a rear seating position than in the front seating position. Children 12 and under should ride in the back seat of the vehicle.
Use this Booster Seat only on forward facing vehicle seats. DO NOT use this Booster Seat with vehicle seats which face the rear or side of the vehicle.
Use this Booster Seat only on vehicle seats with backs that lock into place.
Some Booster Seats do not fit in all vehicles. If the Booster Seat cannot be properly installed, DO NOT use the Booster Seat. Consult your vehicle owner’s manual, try a different seating location, or call Evenflo at 1-937-773-3971 (Canada) or 1-800-233-5921 (US) for further assistance.

Booster Seat Position Warnings

DO NOT use this Booster Seat rear-facing.
When using this Booster Seat, the headrest on the vehicle seat that the child faces should be put in its lowest position. The vehicle seat back that the child faces must be fully padded and free of any hard objects.

Seat Belt Warnings

ALWAYS read your vehicle owner’s manual to determine what vehicle belts and retractors are used in your vehicle.
DO NOT use this Booster Seat in a vehicle with door-mounted seat belts.
DO NOT use this Booster Seat in a vehicle with seat belts that automatically move along the vehicle frame when the door is opened. These seat belts will not hold a Booster Seat properly.
DO NOT use with lap/shoulder belts with two retractors. If the vehicle seat belts are not routed and fastened correctly, the Booster Seat may not protect the child in a crash.
When using this Booster Seat, NEVER use a lap belt only. You MUST use vehicle seat belts that have a lap/shoulder combination.
DO NOT use this Booster Seat with the backrest if the child’s ears are above the top of the Booster Seat headrest.
Failure to adjust, the seat belts snugly around your child may result in your child striking the vehicle’s interior during a sudden stop or crash.
DO NOT use this Booster Seat if it is damaged or has broken or missing parts.

Seat Belt Warnings

If you have any of these types of vehicle belt systems listed, these are SAFE to use to install your Booster Seat in the vehicle. Review vehicle owner’s manual for specific instructions on Booster Seat installation.
Lap/Shoulder Belt with Locking Latch Plate
The lap portion of this belt does not loosen once the belt is buckled. The vehicle belt is tightened by pulling up hard on shoulder belt and feeding the extra webbing into the retractor.

Lap/Shoulder Belt with Sliding Latch Plate with Locking Retractor
The latch plate slides freely along the lap/shoulder belt. Vehicle belts with sliding latch plates are typically locked at the shoulder belt retractor by buckling the belt and pulling all of the webbing out slowly to switch the retractor.

Additional Warnings

DO NOT use this Booster Seat if it has been involved in an accident. It must be replaced.
This Booster Seat must be securely belted to the vehicle at all times. An unsecured Booster Seat may injure someone if a crash occurs.\
DO NOT attach additional padding, toys, or other devices not made by Evenflo to the Booster Seat. Items not tested with the Booster Seat could injure the child.
In hot, sunny weather cover the seat with a light colored blanket when you leave the vehicle. Always check the seat for hot surfaces before putting a child into the seat.
DO NOT use this Booster Seat without the seat pad.

Booster Seat Features

* Not all features are available on all models. Styles may vary.

Description

The Evenflo Go Time Sport LX Booster Seat is designed with both safety and convenience in mind. Its high-back mode provides additional support and protection for younger children, while the backless mode is suitable for older children transitioning to using the vehicle's seatbelt. The seat features a contoured design to ensure optimal comfort and positioning of the seatbelt across the child's body. The cushioning is soft and durable, providing long-lasting comfort during extended car rides.

The booster seat's compact size ensures it fits well in most vehicles without taking up too much space. Additionally, its lightweight construction makes it easy to move from one car to another, making it an excellent choice for families who need to use multiple vehicles.

Using the Cup Holder

WARNING! DEATH INJURY or SERIOUSLY can occur.

DO NOT use the cup holder to store cans, bottles, or hard containers. Only for use with soft cups.
DO NOT place any cups that contain hot liquids in the cup holder.

Assembling Your Booster Seat

Assemble the headrest. Insert three posts on the headrest into the backrest, as shown. Make certain the headrest clicks securely into the backrest.
Note: This is a one-time assembly and may require additional force to connect properly.
TIP: If necessary, place the backrest upright on a non-slip surface and install one end post first A, then the other B, rocking the headrest side-to-side while pushing down to secure with a CLICK.
Install adjustment handle. Align tabs on adjustment handle with the slots on the back of the headrest. Press adjustment handle against the back of the headrest and slide upward until the tabs click into place.
Assemble the backrest. Slide adjustment track into backrest assembly while squeezing handle. Make certain adjustment track can slide freely into different positions.
Attach the seat pad to the backrest assembly.
- If you purchased a GoTime Sport Booster, connect the four elastic headrest loops to the four corresponding headrest hooks. Then connect the two tabs (see inset) and six elastic loops on the backrest as shown at right.
- If you purchased a GoTime LX Booster, please use the image at right as reference when connecting the four elastic headrest loops to the four corresponding headrest hooks, then refer back to page 15 for the tabs and loops on the backrest.
Attach the seat pad to the base. Connect elastic loops to the hooks on the back of the base. Push retainer clips into the corresponding holes in the front of the base and push UP to secure in place.
Install the backrest assembly. Position the base under the backrest assembly. Slide the backrest assembly onto the base. Make certain the backrest assembly locks into place with an audible click.
Check your work. Inspect the Booster Seat. Pull up on the headrest to make sure it is securely attached to the backrest. Make sure the seat pad is hooked into place. Pull on the backrest to make sure it is securely attached to the base. Repeat any assembly steps as necessary.

Booster Insert (Canada Only)

FOR CANADIAN MODELS ONLY: The Booster Inserts MUST be installed before use of this Booster Seat in a vehicle.

To install the Booster Inserts, line up the tabs to the slots at the rear of the backrest. Slide the Booster Inserts onto the backrest. Make certain the Booster Inserts lock into place with an audible click.
Note: This is a one-time assembly and may require a screwdriver to remove once installed.

When to Put Your Child in a Booster Seat

Booster Seats raise the child up and help to position the vehicle lap and shoulder belt correctly. The Booster Seat itself does not provide the primary means of restraint – the vehicle belts do. When the child is properly restrained in a Booster Seat with the vehicle belts, their risk of injury in all types of crashes is reduced, as the lap and shoulder belt provide excellent restraint of the upper and lower torso.

It is important for the child to sit properly within the vehicle seat belts. When the vehicle belt is buckled, the lap belt should be low on the hips, just touching the thighs, and the shoulder belt should lie across the middle of the shoulder. If the child leans out, moves the belt behind the back, or places it under the arm, it will not provide the intended restraint.

You should consider using a Booster Seat if the following conditions apply:

The child is approaching/has exceeded the weight or height limit of their Car Seat’s forward-facing, harnessed mode of use.
The child is mature enough to sit in the Booster Seat with the vehicle belts in proper position and not put the belts under their arm or behind their back.
For US use only: If your child meets the requirements for both forward-facing harnessed use and booster use, and your vehicle does not have a Tether Anchorage, but does have lap and shoulder belts in the back seat, a Booster Seat may provide better protection than an internal harness seat without the Tether.

How is a Booster Seat used?
Using a Booster Seat is very similar to buckling yourself into the vehicle because you are using the vehicle’s restraint system to secure your child:

Read the instruction manuals for both the Booster Seat and the vehicle before you start.
Put the Booster in the back seat in a location with a lap and shoulder belt. Never use a Booster Seat with only a lap belt, as this could cause serious injuries.
Base of Booster should be flat on vehicle seat.
After the child is in the Booster, pull the lap and shoulder belt across and buckle it. Your child is being restrained by the vehicle’s lap and shoulder belt, so fit of the belts are important.
Check that the shoulder belt lies across the middle of the shoulder and that the lap belt is low on the hips, just touching the thighs.

Using Your Booster Seat with the Backrest

Child Requirements

Weight: 18 – 54.4 kg (40 – 120 lbs)
Height: 112 – 145 cm (44 – 57 inches)
Age: At least four years old
The tops of the child’s ears are below the top of the Booster Seat headrest.

using_your_booster_seat_without_the_backrest_evenflo_go_time_sport_lx_booster_seat.png

Installation Checklist

Place the Booster Seat on the vehicle seat.
Set the child in the Booster Seat.
Make sure the child’s back and bottom are flat against the back and bottom surfaces of the Booster Seat.
Adjust the headrest, if necessary.
Adjust the headrest height so the shoulder belt guides are at or slightly above the top of the child’s shoulders. This will cause the shoulder belt to properly lay midway between the child’s shoulder and neck
WARNING! DEATH INJURY or SERIOUSLY can occur.
The shoulder belt MUST NOT cross the child’s neck or fall off the child’s shoulder. If you cannot adjust the shoulder belt to properly lay midway between the child’s shoulder and neck, try another seating location or do not use the Booster Seat.
Secure the child and Booster Seat to the vehicle seat.
Stretch the lap/shoulder belt across the child and fasten the buckle. Make certain the shoulder belt is threaded through the shoulder belt guide. Both the lap and shoulder belts MUST be positioned under the armrest on the Booster Seat.
Check your work.
Make sure the lap belt is stretched low and snug across the child’s hips, and fastened into the buckle. The shoulder belt must cross the child midway between his/her shoulder and neck.

IMPORTANT: Always secure the Booster Seat with the vehicle seat belts when not occupied. An unsecured Booster Seat can fly into and injure other occupants in the event of a crash.

Using Your Booster Seat without the Backrest

Child Requirements

Weight: 18 – 54.4 kg (40 – 120 lbs)
Height: 112 – 145 cm (44 – 57 inches)
Age: At least four years old
The tops of the child’s ears are below the top of the vehicle headrest.

Installation Checklist

Remove the backrest from the Booster Seat.(See Removing the Backrest, page 25.)
Place the Booster Seat on the vehicle seat.
Set the child in the Booster Seat.
Make sure the child’s back is flat against the vehicle seat, and the child’s bottom is flat against the Booster Seat.
Secure the child and Booster Seat to the vehicle seat.
Stretch the lap/shoulder belt across the child and fasten the buckle. Both the lap and shoulder belts MUST be positioned under the armrest on the Booster Seat.
Use the shoulder belt clip, if necessary.
If the shoulder belt does not properly lay midway between the child’s shoulder and neck, attach and adjust the belt clip.
The shoulder belt MUST NOT cross the child’s neck or fall off the child’s shoulder. If you cannot adjust the shoulder belt to properly lay midway between the child’s shoulder and neck, try another seating location or do not use the Booster Seat.
Check your work.
Make sure the lap belt is stretched low and snug across the child’s hips, and fastened into the buckle. The shoulder belt must cross the child midway between his/her shoulder and neck.

Note: If the vehicle’s shoulder belt naturally crosses the child’s shoulder, you do not need to use the shoulder belt clip.
WARNING! DEATH or SERIOUS INJURY can occur.
Installation Checklist
The shoulder belt MUST NOT cross the child’s neck or fall off the child’s shoulder. If you cannot adjust the shoulder belt to properly lay midway between the child’s shoulder and neck, try another seating location or do not use the Booster Seat.
IMPORTANT: Always secure the Booster Seat with the vehicle seat belts when not occupied. An unsecured Booster Seat can fly into and injure other occupants in the event of a crash.

Adjusting the Headrest

You will need to adjust the headrest as your child grows to maintain proper seat belt positioning.
To adjust the headrest, pull and hold the adjustment handle then slide the headrest up or down. The headrest is positioned properly when the shoulder belt guides are at or slightly above the top of child’s shoulders.

Removing the Backrest

Lay the Booster Seat on its front.
Pull lever on the bottom of the base and remove the backrest from the base.

Important: Store the backrest properly when not in use.

Using the Shoulder Belt Clip

Note: Use the Shoulder Belt Clip only when necessary to position the shoulder belt so it lays across the child’s chest midway between his/her shoulder and neck.

Thread the looped end of the shoulder belt clip belt through the anchor point on back of the base.
Thread the shoulder belt clip through the loop at the end of the belt and pull until tight.
Place booster on the vehicle seat and attach the shoulder belt clip to the vehicle shoulder belt.
Pull the adjustment strap until belt clip is at or slightly above the child’s shoulder and the vehicle shoulder belt lays across the child’s chest midway between his/her shoulder and neck.

Removing the Seat Pad

Remove the seat pad from the backrest assembly. Disconnect elastic loops from the hooks on the backrest assembly. Remove the seat pad.
Remove the seat pad from the base. Disconnect elastic loops from the hooks on the back of the base. Pull DOWN on the retainer clips and disconnect clips from the front of the base. Remove the seat pad.

Setup Guide

Setting up the Evenflo Go Time Sport LX Booster Seat is straightforward and does not require any complex installation. Here are the steps to follow:

Place the booster seat on the vehicle's seat, ensuring it is centered and stable.
Position your child on the booster seat, ensuring their back is against the backrest (if using high-back mode) or they are sitting comfortably (if using backless mode).
Route the vehicle's seatbelt across your child's body according to the manufacturer's guidelines, ensuring the shoulder strap lies across the shoulder and the lap belt is across the hips.
Adjust any necessary features such as headrest height or armrests for optimal comfort and support.

Care and Cleaning

Plastic parts may be wiped clean with mild soap and water and dried with a soft cloth. Do not use abrasive cleaners or solvents.
Take care not to damage any labels.
The seat pad (except for leather seat pads*) can be machine washed separately in cold water, delicate cycle, tumble dry 10 to 15 minutes on low heat.
NEVER use Booster Seat without the seat pad.
To protect the Booster Seat from damage caused by weather, rodents, and other elements common to garages, the outdoors, and other storage locations, remove the seat pad and thoroughly clean the Booster Seat and pad prior to storage. Take care to clean in the areas where crumbs and other debris tend to accumulate.

TIP: To help protect the vehicle upholstery, place a towel beneath and behind the Booster Seat.

Not all features are available on all models. Styles may vary.

Replacement Parts

You can order replacement parts online at https://www.evenflo.com or by contacting Evenflo ParentLink. When you contact us, please have the product model number and date of manufacture (found on the bottom of the Booster Seat).

Not all features are available on all models. Styles may vary.

Proper Disposal of this Booster Seat

When this Booster Seat reaches the expiration date found on the date of manufacture label, Evenflo encourages you to dispose of it properly. Most components of this Booster Seat are recyclable.

Remove all fabric and padding.
Remove all screws and disassemble the Booster Seat.
Recycle all fabric, padding, plastic, foam and metal parts, if accepted by your local recycling center. Responsibly discard the rest.

If your local recycling center won’t accept the padding, you may dispose of it in the landfill.
To prevent injury due to hidden damage, lost instructions, outdated technology, etc., discontinue use of this Booster Seat after the expiration date on the label or if it has been involved in a crash.

Storing Your Instructions

After thoroughly reading and following these instructions, STORE THE INSTRUCTIONS IN THE SLOTS PROVIDED ON THE BOTTOM OF THE BOOSTER SEAT.

Troubleshooting

If you encounter any issues with your Evenflo Go Time Sport LX Booster Seat, here are some common problems and solutions:

Issue: Seatbelt not fitting properly. Solution: Ensure the booster seat is correctly positioned and adjust the headrest or armrests as needed.
Issue: Booster seat slipping or moving during use. Solution: Check that the booster seat is properly placed on a flat surface and adjust any stabilizing features if available.

Warning: Never use the booster seat without following all safety guidelines provided by the manufacturer.

Warranty

For a period of 90 days from the original purchase of this Product, Evenflo warrants to the original end user (“Purchaser”) this Product (including any accessories) against defects in material or workmanship. Evenflo’s sole obligation under this express limited warranty shall be, at Evenflo’s option, to repair or replace any Product that is determined to be defective by Evenflo and determined to be covered by this warranty.

Pros & Cons

Pros

Lightweight and portable design
Easy to set up and use
Meets or exceeds all U.S. federal safety standards
Affordable price point
Comfortable cushioning and contoured design

Cons

Limited durability of cushioning over time
No built-in cup holders or storage compartments
May not fit as snugly in some vehicle models

Customer Reviews

Customers generally praise the Evenflo Go Time Sport LX Booster Seat for its ease of use, comfort, and affordability. However, some users mention that the cushioning may lose its shape over time and that additional features like cup holders would be beneficial.

Common Complaints

Some users report issues with the seat's stability in certain vehicles.
A few customers find the lack of storage compartments inconvenient.

Search Manuals in: go-time

Read More