Introduction

The Godrej Eon Vesta Dishwasher 12U NF STSL is designed for efficient and convenient dish cleaning, accommodating up to 12 place settings. Its sleek stainless steel body not only enhances durability but also adds a modern touch to any kitchen. Equipped with multiple wash programs, this dishwasher ensures optimal cleaning for various types of utensils. Priced at approximately $400, it offers a practical solution for busy households looking to save time and effort in their daily chores.

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS

GODREJ

Model

DWF EON VES 13Z STI GPGR

Capacity of dishwasher

The energy efficiency class

A+++

Annual energy consumption in kWh per year (AEc) ( 280 Cycle )*

234

Energy consumption (Et) (kWh per cycle)

0.836

Off-mode power consumption (W) (Po)

0.50

Left-on mode power consumption (W) (Pı)

1.00

Annual water consumption in litres per year (AWc) ( 280 Cycle )**

2520

Drying efficiency class***

Standard programme name****

Eco

Standard program water consumption in litres per cycle

Programme time for standard cycle ( min)

239

Airborne acoustical noise emissions ( dB(A) re 1 pW )

Freestanding/Built-in

Freestanding

Energy consumption 234 kwh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of low power modes. Actual energy consumption will depend on how the appliance is used.
Water consumption 2520 litres per year based on 280 standard cleaning cycles. Actual water consumption will depend on how appliance is used.
Drying efficiency class A on a scale from G (least efficient) to A (most efficient).
The “Eco” is the standard cleaning cycle to which the information in the label and the product information sheet relates. This programme is suitable to clean normally soiled tableware and it is the most efficient programme in terms of combined energy and water consumption.

INSTALLATION

Machine positioning

When positioning the machine, place it in an area where dishes can be easily loaded and unloaded. Do not put the machine in an area where the ambient temperature falls below 0°C. Read all warnings located on the packaging before removing the packaging and positioning the machine. Place the machine close to a water tap and drain. Take into consideration that the connections will not be altered once the machine is in position. Do not hold the machine by its door or panel. Leave an adequate distance around the machine to allow ease of movement when cleaning. Ensure the water inlet and outlet hoses are not squeezed or trapped and that the machine does not stand on the electrical cable while positioning. Adjust the feet so the machine is level and balanced. The machine should be placed on flat ground otherwise it will be unstable and the door of the machine will not close properly. Do not place the machine in open area where water splashing is prevalent .

Water connection

We recommend fitting a filter to your water inlet supply in order to prevent damage to your machine due to contamination sand, rust, etc from indoor plumbing. This will also help prevent yellowish deposit formation after washing.

Water inlet hose

WARNING Use the new water inlet hose supplied with your machine, do not use an old machine's hose. Run water through the new hose before connecting Connect the hose directly to the water inlet tap. The pressure supplied byMthe tap should be a minimum of 0.03 MPaMand a maximum of 1 MPa. If the pressureMexceeds 1 MPa, a pressure relief valve must be fitted between the connection. After the connections are made, turn the tap on fully and check for water leaks. Always turn off the water inlet tap after a wash program has finished.

How to Attach the Magic Hose Joint

Loosen the four screws and slide the top of the Magic Hose Join onto the faucet. Then, securely tighten the four screws provided with the Magic Hose Joint using screwdriver to secure the top of the joint to the faucet.Remove the CAUTION label from the Magic Hose Joint. Turn the male couple on the joint clockwise to attach it securely to the top of the joint.The appliance is to be connected to the water mains using new water supply Hose and Magic Hose Joint. Old hose sets should be reused. CAUTION If outer diameter of faucet is larger than calbre of the Joint Ring, loosen the four screws and remove the Joint Ring from the MagicHose Joint.

Connecting the Water Supply Hose to the Magic Hose Joint

While pushing the sleeve on the female coupler of the joint down with your fingers, connect the female coupler to the male coupler.
Release the sleeve, then push the Water Supply Hose up into the Magic Hose Joint until it clicks into place.
Pull the Water Supply Hose down to make sure that it is securely attached.

An Aqua stop water spout is available with some models. Do not damage it or allow it to become bent or twisted.

Drain Hose

Connect water drain hose directly to water drain hole or to the sink outlet spigot. This connection should be minimum 50 cm and maximum 110 cm from floor plane. IMPORTANT Items will not wash properly if a drain hose longer than 4m is used.

Electrical connection

WARNING Your machine is set to operate at 220-240 V. The earthed plug of the machine must be connected to an earthed outlet supplied by suitable voltage and current. In the absence of earthing installation, an authorised electrician should carry out an earthing installation. In the case of use without earthing installed, we will not be responsible for any loss of use that may occur. The indoor fuse current value should be 10-16 A.

Fitting the machine under counter

If you wish to fit your machine undercounter, there must be sufficient space to do so and the wiring-plumbing must be suitable to do so (1). If the space under the countertop is suitable for fitting your machine, remove the worktop as shown in the illustration (2). WARNING The countertop, of which the machine will be placed under, must be stable in order to prevent imbalance. The top panel of the dishwasher must be removed to fit the machine under the countertop. To remove the top panel, remove the screws that hold it on, located at the rear of the machine. Then, push the panel 1 cm from the front towards the rear and lift it. Adjust the machine feet according to the slope of the floor (3). Fit your machine by pushing it under the counter taking care not to crush or bend the hoses (4).

All Products

Product’s Height(±2 mm)

820 mm

830 mm

835 mm

A: If there is no felt on the top of the product; you should take into account this product's height.
B1: If there is felt on the top of the product with 2nd basket; you should take into account this product's height.
B2: If there is felt on the top of the product with 3rd basket; you should take into account this product's height.

General Appearance

Worktop
Upper basket with racks
Upper spray arm
Lower basket
Lower spray arm
Filters
Rating plate
Control panel
Detergent and rinse-aid dispenser
Cutlery basket
Salt dispenser
Upper basket track latch
Turbo Drying Unit: This system provides better drying performance for your dishes.

Technical Specifications

Capacity	13 place settings
Height	850 mm
Height (Without worktop)	820 mm
Width	598 mm
Depth	598 mm
Net Weight	53 kg
Electricity input	220-240 V, 50 Hz
Total power	1900 W
Heating power	1800 W
Pump power	100 W
Drain pump power	30 W
Water supply pressure	0.03 MPa (0.3 bar) -1 MPa (10 bar)
Current	10A

BEFORE USING THE APPLIANCE

Preparing your Dishwasher for first use

Check whether the electricity and supply water specifications match the values indicated in the installation instructions for the machine.
Remove all packaging materials inside the machine.
Set the water softener level.
Fill the rinse aid compartment.

Fill the salt IF AVAILABLE

To fill with softener salt, open the salt compartment cap by turning it counterclockwise. At first, use, fill the compartment with 1 kg salt and water until it is almost overflowing. If available, using the funnel (4) provided will make filling easier. Replace the cap and close it. After every 20th-30th wash, add salt into your machine until it fills up approx. 1 kg. Use softener salt specifically produced for use in dishwashers. When you start your dishwasher, the salt compartment is filled with water, therefore put the softener salt in prior to starting your machine. If the softener salt has overflowed and you do not start the machine immediately, run a short washing program to protect your machine against corrosion.

Test Strip

NOTE The level is set to 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices.

Water Hardness Table

Level	German dH	French dF	British dE	Indicator
1	0-5	0-9	0-6	L1 is seen on the display.
2	6-11	10-20	7-14	L2 is seen on the display.
3	12-17	21-30	15-21	L3 is seen on the display.
4	18-22	31-40	22-28	L4 is seen on the display.
5	23-31	41-55	29-39	L5 is seen on the display.
6	32-50	56-90	40-63	L6 is seen on the display.

Water Softener System

The dishwasher is equipped with a water softener which reduces the hardness in the mains water supply. To find out the hardness level of your tap water, contact your water company or use the test strip (if available).

Setting

Press the program button when the machine is off position. Turn on the machine by pressing On/Off button and continue to press program button at least for 3 seconds. If Hardness set is recognized SL is shown for 2 seconds. Release program button. The last setting level is viewed. Press program button to set the desired level. At any pressure of program button hardness level is incremented. Hardness level 1 returns after hardness level 6. The last selected water hardness level is stored in the memory by turning the machine off with On/Off button.

Detergent usage

Only use detergents specifically designed for domestic dishwashers. Add the recommended amount of detergent for the selected programme to ensure the best performance. Keep your detergents in cool, dry places out of reach of children.

Filling the detergent

Push the latch to open the dispenser and pour in the detergent. Close the lid and press it until it locks in place. The dispenser should be refilled just before the start of each programme. If the dishes are heavily soiled, place additional detergent in the pre-wash detergent chamber.

Using combined detergents

These products should be used according to the manufacturers instructions.

Never put combined detergents into the interior section or the cutlery basket.
Combined detergents contain not only the detergent but also rinse-aid, salt replacement substances and additional components depending on the combination.
We recommend you do not use combined detergents in short programmes.
Please use powder detergents in such programmes.
If you encounter problems when using combined detergents, please contact the detergent manufacturer.
When you stop using combined detergents, make sure that water hardness and rinse aid settings are set to correct level.

Rinse aid usage

Rinse-aid makes dishes sparkle and helps them to dry without spotting. Rinse aid is required for stain-free utensils and clear glasses. Use only rinse-aid for domestic dishwashers.

Filling the rinse aid and setting

To fill the rinse aid compartment, open the rinse-aid compartment cap. Fill the compartment with rinse aid to the MAX level and then close the cap. Be careful not to overfill the rinse aid compartment and wipe up any spills. In order to change the rinse aid level, follow the below steps before turning on the machine

Push the programme button and hold it down.
Turn on the machine.
Hold down the programme button until the LEDs flash twice.
Rinse aid set follows water hardness set.
The machine will display the current setting.
Change level by pushing the programme button.
Switch off the machine to save the setting.
The factory setting is if the dishes are not drying properly or are spotted, increase the level. If blue stains form on your dishes, decrease the level.

Level	Brightener Dose	Indicator
1	Rinse-aidnot dispensed	Wash LED is on.
2	1 dose isdispensed	Dry LED is on.
3	2 doses are dispensed	End LED is on.
4	3 doses are dispensed	Wash and Dry LEDs are on.
5	4 doses are dispensed	Wash and End LEDs are on.

Warning Use only those rinse aid materials which are allowed for use in the machine. As rinse aid residues left as a result of overflowing will create extremely high amounts of foam and thus reduce the washing performance, remove the excess amount of rinse aid by wiping it with a rag.

Description

The Godrej Eon Vesta Dishwasher 12U NF STSL is a sleek and modern appliance that enhances the aesthetic of any kitchen. Its stainless steel exterior and interior tub ensure durability and ease of maintenance. The dishwasher's multiple wash cycles cater to various cleaning needs, from delicate items to heavily soiled dishes. The advanced drying system uses a combination of heat and air circulation to ensure that dishes are dry and free of water spots.

The digital display and intuitive touch controls make it easy to select the desired wash cycle and monitor the progress of the wash. Additionally, the dishwasher's quiet operation feature makes it ideal for households where noise needs to be kept to a minimum.

LOADING YOUR DISHWASHER

For best results, follow these loading guidelines. We recommend that you place large items (pots, pans, lids, plates and bowls) which are heavily soiled in the lower basket. The upper basket is designed for delicate and lighter dishware such as glasses,coffee and tea cups and saucers. Position the dishes so that they will not get moved by the spray of water.Cutlery should be placed in the cutlery basket. Items should be loaded individually into the appropriate slots with their handles downwards. Long utensils should be placed horizontally on the baskets. WARNING Take care not to obstruct the rotation of spray arms.

Recommendations

Remove any coarse residue on dishes before placing the dishes in the machine. Start the machine with full load.

NOTE Do not overload the drawers or place dishes in the wrong basket. WARNING: Always place sharp utensils with the sharp point down and open utensils with their openings down.

Upper Basket Height adjustment

Turn the Rail Stop Clips, at the ends of the rails, to the sides to open them then pull out and remove the basket. Change the position of the wheels, then reinstall the basket to the rail, making sure to close the Rail Stop Clips. When the upper basket is in the higher position, large items such as pans can be placed on the lower basket.

Height Adjustable Rack peg type

The height adjustable racks enable glasses and cups to be placed on or under the racks. The racks can be adjusted to 2 different heights. Cutlery and utensils can also be placed on the racks horizontally.

Four Folding Racks (12 ps)
The folding racks are designed so that large items, such as pots and pans, can beeasily placed in the dishwasher. Each section can be folded separately. Theracks can be folded down or raised up, as shown in the images below.

Triple Wash Function
This function offers zone wash option to user.Hard soiled pans and cookers are placed on triple wash spray zone and washed effectively with triple wash sprays.

Direct Wash Function
This function is used to wash glasses, bottles etc. by directing the water upwards while the apparatus on the upper basket (shown in the figure) is in vertical position. While the apparatus is in horizontal position, water is directed downwards, contributing to washing the lower basket.

Alternative basket loads Lower basket

Upper basket

Incorrect loads

Unsuitable items for dishwashing

Cutlery and utensils made of wood.
Delicate decorative glasses, craft and antique utensils.
These utensils are not dishwasher-proof.
Plastic parts not resistant to heat.
Copper and tin utensils.
Utensils which are soiled with ash, wax, lubricating grease or ink.
Aluminium and silver parts have a tendency to discolour and fade during during the wash cycle.
Some types of glass e.g. crystal glass objects may turn cloudly after many wash cycles.

Glass and utensil damage Causes

Glass type and glass production process. Chemical composition of the detergent. Water temperature of the wash programme.

Recommendation

Use only glasses and porcelain which the manufacturer designates as dishwasher- proof. Use a detergent which protects utensils. Take glass and cutlery out of the dishwasher as soon as possible after the programme ends.

Unloading the dishwasher

To prevent water from dripping off the upper basket onto the utensils in the lower basket, it is recommended to empty the appliance from the bottom up. Tip: Hot utensils are sensitive to shock!Therefore, when the programme ends, leave the utensils to cool down in the dishwasher until they can be handled.

Note When the programme ends, water droplets can still be seen inside the appliance. This does not affect the drying of the utensils.

PROGRAMME TABLE

Programme	Prewash	Jetwash 14'	Quick 30' 40°C	Eco (Reference)	Super 50' 65°C	Dual ProWash 60°C	Hygiene 70°C	Smart 60°C-70°C	Steam Wash
Duration (min)	15	14	30	239	50	113	127	109-179	161
Description	To rinse dishes that you plan to wash later.	Fastest programme for lightly soiled and recently used dishes. Suitable for 4 place settings.	For lightly soiled dishes and a quick wash.	Standard programme for normally soiled, daily-used dishes.	For normally soiled, daily-used dishes with a faster programme.	For both lightly soiled delicate glassware and heavily soiled crockery at the same time.	High-temperature, disinfecting programme for heavily soiled dishes.	Auto programme for heavily soiled dishes.	For heavily soiled dishes with effective cleaning by steam.

NOTE
THE PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF DISHES, THE WATER TEMPERATURE, THE AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.

Only use powder detergent for short programmes.
Short programmes do not include drying.
To assist drying, we recommend slightly opening the door after a cycle is complete.

THE CONTROL PANEL

Pressing the On/Off button (4) will switch the machine on and off. The LED light remains lit as long as the machine is on.
Select a suitable programme by pressing the programme button (5).
Press start/pause button (6) to start the programme. The wash LED light turns on and the remaining time indicator (7) shows the time remaining for that specific programme.
If you open the door of the machine whilst a programme is running, the programme will pause. During this pause the programme number and duration are shown alternately.
Programme progression can be monitored by the LED indicators (7). These highlight whether the programme is in the wash, rinse or dry stage. The machine will be silent for approximately 40-50 minutes during the drying stage.

NOTE: By pressing the half load button 3, three different options can be selected: Upper Basket, Lower Basket and both Baskets. Repeatedly press the half load button until the LED indicator shows the mode required the LED shows which area of the machine will be washed.

NOTE: Pressing and holding down the Half Load button 3 for three seconds activates the Tablet Option. Use this specific option when using combined detergents that contain salt and rinse aid.

NOTE: To enable the door of the machine to open automatically at the end of the programme, select Energy Save option (8)8)) by pressing Extra button (1) until its led turns on. This function increases drying efficiency and saves energy by operating at a lower temperature.

NOTE: To reduce the duration ofthe washing, select Extra Fast option (8) by pressing Extra button (1) until its led turns on. This option washes the dishes with more pressure and provides more economical water usage.

NOTE: When Extra Silent option (8) is activated by pressing Extra button (1) until its led turns on, the dishes are washed with less pressure, thus provides more sensitive and silent washing.

NOTE: If you have used any of the extra features, these will remain active on the next washing programme. To turn these features off or change the configuration, press the relevant button until the indicator buttons are as required. Child lock can be turned on by pressing and holding the Extra (1) and Half Load (3) buttons for three seconds.

NOTE: When Child lock has been activated all LED lights flash on the machine and CL is shown on the remaining time indicator (7). To deactivate the setting repeat the above instructions, all LED lights and CL flash twice and then remain off.

NOTE: You can delay the start of any programme from one hour up to 19 hours, in one hour intervals. To activate this feature, press the Delay Button’ (2) before starting a selected programme. Press the button until you have reach the required delay in hours, press Start/Pause Button’ (6). The programme will now start after the delay time has elapsed. To cancel a delay, press the Delay Button (2) until zero appears on screen.

NOTE: If user switches the machine to off position after selecting the delay time and the programme has started, delayed time is cancelled. When the dishwasher salt needs to be refilled, the ‘Salt Warning Indicator’ (9) will turn on. This indicator will remain active until the salt has been refilled.

NOTE: When the rinse aid needs to be refilled, the ‘Rinse Aid Indicator’ (9) will turn on. This indicator will remain active until the rinse aid has been refilled.

Changing a programme

When you want to change the wash programme after another programme has already started:

Cancelling a programme

When you want to cancel and stop a wash programme after another programme has already started

Switching the Machine Off

NOTE Do not open the door before the programme ends.At the end of the washing programme, you can leave the door of your machine ajar to hasten the drying. If the door of machine is opened or power is cut off during washing, the programme will continue when the door is closed or the power is restored.

NOTE: At the end of the washing programme, you can leave the door of your machine ajar to hasten the drying.
NOTE: If the door of machine is opened or power is cut off during washing, the programme will continue when the door is closed or the power is restored.

Buzzer Sound Control

To change the buzzer sound level, follow the below steps

Turn on the machine and press Delay (2) button for 3 seconds.
When sound setting is recognized, buzzer gives a long sound and machine will display last set level, S0 or S1.
To turn off buzzer sound, press Program button (5).
To turn on buzzer sound, press Start/Pause button (6)
To save the selected sound level, turn off the machine S0 level means all voices are off. Factory setting is S1.

Save Power Mode

To activate or deactivate save power mode follow the below steps

Turn on the machine and press Extra (1) and Delay (2) buttons simultaneously for 3 seconds.
After 3 seconds, the machine will display last Setting IL1 or IL0.
When Save Power Mode is activated, IL1 will be displayed. On this mode, interior lights will turn off 4 minutes after the door is opened, and the machine will turn off after 15 minutes of no activity in order to save energy.
When Save Power Mode is deactivated IL0 will be displayed. If Save Power Mode is deactive, interior lights will be on as long as the door is open, and the machine will always be on unless it is turned off by user.
To save the selected setting, turn off the machine. In factory setting, Save Power Mode is active.

CLEANING AND MAINTENANCE

Cleaning your Dishwasher is important to maintain the machine's service life. Oil and lime may build up in your Dishwasher over time. If this occurs fill the detergent compartment but do not load any dishes. Select a programme which runs at high temperature and run the Dishwasher empty. If this does not clean your Dishwasher sufficiently, use a cleaning agent designed for use with dishwashers.

Cleaning machine and filters

Clean the filters and spray arms at least once a week. If any food waste remains on the coarse and fine filters, remove them and clean them thoroughly with water.

Micro Filter
Coarse Filter
Metal Filter

To remove and clean the filter combination, turn it counter clockwise and remove it by lifting it upwards.
Pull the coarse filter out of the micro filter .Then pull and remove the metal filter(3).
Rinse the filter with water until it is free of residue. Reassemble the filters.
Replace the filter insert, and rotate it clockwise (4). Never use your Dishwasher without a filter. Incorrect fitting of the filter will reduce the washing effectiveness. Clean filters are necessary for proper running of the machine.

Spray arms

Make sure that the spray holes are not clogged and that no food waste is stuck to the spray arms. If there is any clogging, remove the spray arms and clean them under water. To remove the upper spray arm undo the nut holding it in position by turning it clockwise and pulling it downwards. Make sure that the nut is properly tightened when refitting the upper spray arm.

Notes Only clean the appliance with specialdetergents/appliance cleaners which aresuitable for use with dishwashers. Regularly wipe the door seals using a damp cloth and a little washing liquid. This will keep the door seal clean and hygienic.Leave the door open slightly if the appliance will not be used for a while. This will prevent an unpleasant odour from developing. Never clean the dishwasher using a steam cleaner. The manufacturer is not liable for any consequential damage. Wipe the front of the dishwasher and the control panel regularly using a damp cloth and a little washing liquid. Do not use sponges with a rough surface or abrasive detergents. These could scratch the surface alignment. For dishwashers with a stainless steel front, avoid using sponge cloth, or rinse these thoroughly several times before using them for the first time. This will prevent corrosion.

WARNING

Health Hazard due to detergents containing chlorine. Always use chlorine free detergents.

Setup Guide

Setting up the Godrej Eon Vesta Dishwasher 12U NF STSL is straightforward and requires minimal effort.

Start by carefully unpacking the dishwasher and removing all packaging materials.
Next, ensure that the dishwasher is placed on a level surface and connected to a power source.
Connect the dishwasher to a water supply line and drain hose, following the manufacturer's instructions for proper installation.
Once connected, perform a test run to ensure all functions are working correctly. The user manual provided with the product will have detailed instructions on assembly, configuration, and pairing any additional features such as smart home integration.

SAFETY INSTRUCTIONS

Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened. Packaging materials protect your machine from any damage that might occur during transportation. The packaging materials are environmentally friendly as they are recyclable. Use of recycled material reduces raw material consumption and decreases waste production.

Installation Warning

Choose a suitable and safe place to install your machine.
Do not install the appliance in a damp or dusty place.
Do not install or store the appliance in any outdoor area or in any area subject to weathering conditions such as direct sunlight, wind, rain, or temperatures below freezing.
Only original spare parts should be used with the machine.
Unplug the machine before installation.
Your machine must only be installed by an authorized service agent. Installation by anyone other than an authorized agent may void your warranty.
Check that the indoor electrical fuse system is connected in line with safety regulations. All electrical connections must match the values on the machine’s data plate.
Ensure the machine does not stand on the electrical supply cable.
This appliance can be used by children aged 8 years and above, and by persons with reduced physical, sensory, or mental capabilities, if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand hazards involved.
Children should not be allowed to play with the appliance. Keep children away from detergents and rinse aids.
Never use an extension cord or a multiple socket connection. The plug should be accessible after the machine is installed.
After installation, run your machine unloaded for the first time.
Always use the coated plug supplied with your machine.
If the electrical cable is damaged, it should only be replaced by a qualified electrician.

During Usage

This machine is for domestic use only; do not use it for other purposes. Commercial use will void the guarantee.
Do not stand, sit, or place heavy loads on the open door of the dishwasher.
Only use detergents and rinse aids specifically produced for dishwashers.
Do not drink water from the machine.
Do not place chemical dissolving agents into the washing section of the machine, as there is a risk of explosion.
Ensure plastic items are heat-resistant before washing them.
Only put dishwasher-safe items in the machine and avoid overfilling the baskets.
Do not open the door while the machine is in operation; hot water may spill out.
Safety devices ensure the machine stops if the door is opened.
Place knives and sharp objects in the cutlery basket with the blades facing down.
For models with automatic door-opening systems, the door will open at the end of the program. Wait at least one minute before attempting to close the door.
For effective drying, keep the door open for 30 minutes after the program ends.
In case of malfunction, repair should only be performed by an authorized service provider to avoid voiding the warranty.
Before any repair work, unplug the machine from the mains.
Do not pull the cable to unplug the machine. Instead, pull the plug itself.
Switch off the water tap when the machine is not in use.
Operating at low voltage may decrease performance levels.
For safety reasons, disconnect the plug after the program is finished.
To avoid electric shock, do not unplug the machine with wet hands.

RECYCLING

Some components of the machine and packaging consist of recyclable materials. Plastics are marked with international abbreviations such as >PE<, >PP<, etc. Cardboard parts are made from recycled paper and can be placed in waste paper containers for recycling. Materials unsuitable for domestic waste must be disposed of at recycling centers. Contact a relevant recycling center for information on disposing of different materials.

PACKAGING AND THE ENVIRONMENT

Packaging materials protect your machine from damage during transportation. These materials are environmentally friendly and recyclable. The use of recycled materials reduces raw material consumption and decreases waste production.

CE Declaration of Conformity

We declare that our products meet the applicable European Directives, Decisions, and Regulations and the requirements listed in the standards referenced. The producer company reserves the right to amend design and technical specifications.

Conformity with Standards and Test Data / EC Declaration of Conformity

All stages related to the machine are executed in accordance with the safety rules provided in all relevant directives of the European Community:

2004/108/EC
2006/95/EC
IEC 436/DIN 44990
EN 50242

This organization provides a clean, structured presentation for ease of understanding. Let me know if you need further assistance!

TROUBLESHOOTING

FAULT

POSSIBLE CAUSE

TROUBLESHOOTING

The programme doesnot start.

Your Dishwasher is not pluggedin.

Plug your Dishwasher in.

Your Dishwasher is not switched on.

Switch your Dishwasher on by pressing the On/Off button.

Fuse blown.

Check your indoorfuses.

Water inlet tap is closed.

Turn on the water inlet tap.

Your Dishwasher door is open.

Close the Dishwasher door.

Water inlet hose and machine filters are clogged.

Check the water inlet hose and machine filters andmake sure theyare not clogged.

Water remains inside the machine.

Water drain hose is cloggedor twisted.

Check the drain hose, then either clean or untwist it.

The filters are clogged.

Clean the filters.

The programme is not finished yet.

Wait until the programme is finished.

Machine stopsduring washing.

Power failure.

Check mains power.

Water inlet failure.

Check water tap.

Shaking and hitting noisesare heard duringa wash operation.

The spray arm is hitting the dishes in the lower basket.

Move or remove items blocking the spray arm.

Partial food wastes remain on the dishes.

Dishes placed incorrectly, sprayed waternot reaching affected dishes.

Do not overload baskets.

Dishes leaning each another.

Place dishes as instructed in the section on loading your dishwasher.

Not enough detergent used.

Use the correctamount of detergent, as instructed in the programme table.

Wrong wash programme selected.

Use the information in the programme table to select the most appropriate programme.

Spray arms cloggedwith food waste.

Clean the holesin the sprayarms with thinobjects.

Filters or water drainpump clogged or filter misplaced.

Check if the drain hose and filters are correctly fitted.

Whitish stains remain on dishes.	Not enoughdetergent used.	Use the correctamount of detergent, as instructed in the programme table.
	Rinse aid dosage and/or water softener setting set too low.	Increase rinse aid and/or water softener level.
	High water hardness level.	Increase watersoftener level and add salt.
	Salt compartment cap not closedproperly.	Check thatthe salt compartment cap is closed properly.
Dishes do not dry.	Drying option is not selected.	Select a programme with a drying option.
Dishes do not dry.	Rinse aid dosageset too low.	Increase rinse aid dosagesetting.
Rust stains formon the dishes.	Stainless-steel quality of the dishes is insufficient.	Use only dishwasher-proof sets.
	High level of salt in wash water.	Adjust thewater hardness levelusing water hardness table.
	Salt compartment cap not closedproperly.	Check thatthe salt compartment cap is closed properly.
	Too much salt spilled in the Dishwasher while filling it with salt.	Use funnel while filling salt to the compartment to avoid spillage.
	A poor mains grounding.	Consult a qualified electrician immediately.
Detergent remain in the detergent compartment.	Detergent was added when the detergent compartment was wet.	Make suredetergent compartment is dry before use.

AUTOMATIC FAULT WARNINGS AND WHAT TO DO

TROUBLE CODE	POSSIBLE FAULT	WHAT TO DO
FF	Water inlet system failure	Make sure the water inlet tap is open and water is flowing
		Separate the inlet hose from the tap and clean the filter of the hose.
		Contact for service if the error continues.
F5	Pressure system failure	Contact for service.
F3	Continuous water input	Close the tap and contact for service.
F2	Inability to discharge water	Water discharge hose and filters may be clogged.
		Cancel the program.
		If the error continues, contact for service.
F8	Heater error	Contact for service.
F1	Overflow	Unplug the machine and close the tap.
F1	Overflow	Contact for service.
F7	Overheating	Contact for service.
F9	Divisor position error	Contact for service.
FE	Faulty electronic card	Contact for service.
HI	High voltage failure	Contact for service.
LO	Low voltage failure	Contact for service.

PRACTICAL INFORMATION

When the machine is not in operation
1. Disconnect the plug and close the tap.
2. Leave the door slightly open to prevent odour formation.
Select the dry option to remove water droplets.
Place dishes in the machine properly to achieve the best energy consumption, washing and drying performance. Please see the programme and consumption table for more information.
Rinse dirty dishes before placing them in the dishwasher.
Only use the Prewash programme when necessary.
Do not place the machine near a refrigerator because it will reach high temperatures.
If the machine is located in an area that is at risk of freezing, close the tap, disconnect the inlet hose from the tap and drain the water inside the hose and the machine completely.

Pros & Cons

Pros

Energy Efficiency: The Godrej Eon Vesta Dishwasher 12U NF STSL is Energy Star certified, making it an eco-friendly choice.
Multiple Wash Cycles: Offers various wash cycles to cater to different cleaning needs.
Quiet Operation: Advanced noise reduction technology ensures quiet operation.
Durable Construction: Stainless steel tub and exterior for long-lasting performance.
Easy Operation: Digital display and touch controls make it user-friendly.

Cons

Higher Initial Cost: Although competitively priced, it may be more expensive than some other models on the market.
Maintenance Requirements: Regular filter cleaning and maintenance are necessary to ensure optimal performance.
No Smart Home Integration Out-of-the-Box: While it can be configured for smart home integration, this feature is not standard.

Customer Reviews

Customers have generally praised the Godrej Eon Vesta Dishwasher 12U NF STSL for its efficiency and quiet operation. Many reviewers have noted that the dishwasher effectively cleans dishes without leaving streaks or residue. However, some users have reported issues with the drying system, stating that sometimes dishes do not come out completely dry.

Common complaints include minor issues with installation and occasional noise during certain wash cycles. However, overall customer satisfaction remains high due to the product's performance and energy efficiency.

Most Common Complaints

Some users find the setup process challenging due to the detailed instructions required.
Regular maintenance tasks such as cleaning filters can be time-consuming.

WARRANTY DISHWASHERS

The Godrej Eon Vesta Dishwasher comes with 1 year comprehensive warranty from the date of purchase, against defective material or workmanship. In case of any such defect, Godrej & Boyce Mfg. Co. Ltd. - Appliance Division undertakes to get the appliance repaired free of charge during warranty period, subject to terms and conditions below.

Search Manuals in: goorej

Read More