Introduction of Govee Smart Heater H7130

The Govee Smart Heater is a cutting-edge heating solution designed to keep you cozy and comfortable during the coldest months. With its sleek design, efficient heating, and smart capabilities, this heater is perfect for any room in your home or office. The estimated price of the Govee Smart Heater H7130 is $129.99, and it's now available for purchase.

Speciﬁcations

Power Input	120V~60Hz 1500W MAX
Wattage	High:1500W Medium: 1000W Low: 700W
Connectivity	Wi-Fi or Bluetooth
Oscillating Angle	80 Degrees
Cord Length	5.9ft / 1.8m

Package Includes

Item	Quantity
Heater	1
User Manual	1
Quick Start Guide	1
Front Base	1
Rear Base	1

Description

The Govee Smart Heater H7130 is a powerful and energy-efficient space heater that offers personalized heating for spaces up to 50 square feet. Its stylish design and compact size make it a great addition to any room. The heater features a digital display, touch screen controls, and compatibility with Amazon Alexa and Google Assistant. With its adjustable thermostat, you can easily set your desired temperature for maximum comfort.

Setup of Smart Heater

Setting up the Govee Smart Heater is a breeze

Place the heater on a flat and stable surface.
Plug the heater into a power outlet and turn it on.
Connect the heater to your Wi-Fi network using the Govee Home app.
Set up your preferred heating schedule and temperature preferences using the app or voice commands.

Getting to Know Your Smart Heater

Panel
Buttons
Air Outlet
PTC Heating Component
Base
Handle
Air Inlet
Removable Filter
Power Switch
Power Cord & Plug
Tip-over Switch
Power Cord Slot
Pads

Note: Adequate space has been left at the base for smooth oscillation. Therefore, it is normal if the heater wobbles when pushed.

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk of ﬁre, electric shock, and injury to persons, including the following
Read all instructions before using this heater.

This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear. Extreme caution is necessary when any heater is used by or near children or those in need of assistance, especially whenever the heater is left operating and unattended.
Always unplug this heater from power when not in use.
Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater, or return to authorized service facility for examination and/or repair.
Do not use this heater outdoors.
This heater is not intended to use in bathrooms, laundry areas, and any similar humid indoor environment. Never locate the heater where it may fall into a bathtub or other water containers.
Do not run the power cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from high foot-traffic areas and where it will not be tripped over.
Always plug this heater directly into a wall outlet/receptacle. Never use it with an extension cord or relocatable power tap (outlet/power strip). Plug the heater directly into a 120V wall outlet only.
Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that the heater plug fits tightly into the outlet before using. When using the heater, check to make sure the heater plug is not overheating. If necessary, have a qualified electrician check or replace the wall outlet.
To disconnect the heater, turn controls off, then remove the plug from the outlet.
Do not insert or allow foreign objects to enter any ventilation or exhaust openings as this may cause an electric shock, fire, or damage to the heater.
To prevent a possible fire, do not block the air intakes or exhaust outlets in any manner. Do not use this heater on soft surfaces such as a bed, where openings may be blocked.
Heaters have hot and arcing or sparking parts inside. Do not use this heater in areas where gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other uses are not recommended and may cause fire, electric shock, or injury to persons.
This heater can only be used when the ambient temperature is normal. When the heater detects that the ambient temperature is too high, it will automatically shut down. Please inspect for any objects on or adjacent to the heater that may cause high temperatures.

Installing Your Heater

Before You Install

Use a Φ 5mm Phillips screwdriver to remove the 3 black screws at the bottom of the heater unit.
Align the holes of the 2 base halves and connect them together.
Thread the power cord through the base.
Align the base with the holes on the heater unit bottom and attach by screwing in the 3 black screws. Place the power cord into the power cord slot.

Installation Steps

Make sure the Wi-Fi signal is strong and stable in the current environment.
Only plug the heater directly into a 120V wall outlet. Do not use an extension cord.
Ensure the plug is firmly inserted into the outlet. An abnormal outlet connection may cause overheating.
Place the heater on a firm, flat, and level surface free from obstructions and at least 3ft (1 meter) away from any wall or combustible materials.
Turn on the power switch on the back. Now your heater is ready for use

Note: Do not cover the heater with any cloth or covering, especially over the air inlet and outlet.

Using Your Smart Heater

You can access additional features using the Govee Home app.

Button Functions

Power Button
Press to power on. Repeatedly press to cycle through heat settingsⅠ, Ⅱand Ⅲ. Long press for 2 seconds to power off. Note: The fan will continue working for 15 seconds after power off to clear any residual heat.
Oscillation/Lock Button
Press to turn on oscillation. Press again to pause oscillation. Long press for 3 seconds to turn on Lock Mode. When the lock is active, buttons on the panel will not respond to presses. Long press again for 3 seconds to turn on the Lock Mode. Note: will flash when any other button is pressed to indicate the Lock is on.
Timer Button
Press to turn on the timer. Repeatedly press to cycle through the following timers: 1H, 2H, 4H, and 8H. The heater will automatically turn on when the time is up. Long press for 2 seconds to turn o the timer.

Indicator Light Status

Note: According to related safety standards, the power indicator is required to light up when the heater is plugged into power.

Other Functions

Memory Function
- This heater will memorize the previous settings (speed, oscillation, Wi-Fi connection) when it is powered off. The settings will be active again when this heater is turned on. 24-hour Automatic Shutdown
- This heater will shut down automatically when it has been used for 24 hours straight in case the user forgets to power off.
Overheating Protection
- This heater will power off when the temperature exceeds 122°F (50°C). When powered off, the heater will beep three times, and all the indicators will flash three times.
- Dismiss Overheating Protection: When in Overheating Protection mode, unplug from power and wait for 30 minutes for the heater to cool down before plugging back in. The heater will automatically resume when it detects that the ambient temperature is lower than 122°F (50°C).
Tip-over and Motion Protection
- When the heater is moved or knocked over, it will power off and stop all functions.
- Dismiss Tip-over and Motion Protection: Place the heater on a flat, level, and sturdy surface, and while keeping it upright, try using it again.

Note: This heater contains a safety function in case of tip-over or unintended motion. When tip-over or motion is sensed, the heater will automatically shut off, and disconnect from Wi-Fi. The Wi-Fi will | automatically reconnect once Tip-over and Motion Protection is lifted.

Pairing Your Smart Heater with the Govee Home App

Due to ongoing updates and improvements, the Govee Home App may be slightly different than shown in the manual. In case of any discrepancies, follow the in-app instructions.

To download the Govee Home app, scan the QR code or search “Govee Home” in the Apple App Store (iOS devices) or Google Play Store (Android devices).
Turn on your smartphone’s Bluetooth.
Open the Govee Home app, tap “+” icon in the top right corner and search “H7130”.
Tap the device icon and follow the on-screen instructions to complete pairing.

Note

• Choose to "Allow" all permissions when using Govee Home app for the first time. This app will not record your personal device use.
• You can use the Govee Home app to connect your smart heater to Amazon Alexa or Google Assistant. Follow the in-app instructions to connect to your voice assistant.
• Govee Home app is being continually updated and app features will be expanded.

For App & Connectivity

Cannot connect to the Govee Home app.
- Make sure the Bluetooth of your smartphone is enabled and your smartphone is not connected with other Bluetooth devices.
- Enable the smartphone's Location Services.
- Try connecting with another smartphone.
- Make sure your app is the latest version.
- Make sure your smartphone is connected to the 2.4GHz network, and confirm the network is working correctly.
- Make sure the Wi-Fi password you entered is correct.
- Shorten the distance between the heater, Wi-Fi router, and the smartphone.
- Make sure your heater and the Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc.).
- If you are using a VPN, try turning it off and then connecting the heater. Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, this heater will not be able to access your Wi-Fi network, and setup will fail. Portal authentication means that you need to sign in to your Wi-Fi network through a web page before you can use the Internet.
Cannot find the heater within in nearby Bluetooth devices list.
- The heater may be connected with another smartphone. Disconnect it from the other smartphone first.
The heater is offline.
- Make sure the heater is plugged in and powered on, then refresh "My Devices" in the Govee Home app by swiping down on the screen.
- Make sure your router is connected to the internet, and your phone's network connection is working.
- If the Wi-Fi password has been changed, the heater will automatically go offline. Try connecting it to the network again.
- Delete the offline heater from the Govee Home app, then add and reconfigure the heater again in the Govee Home app.

Care & Maintenance

To achieve the best performance, we suggest cleaning the heater at least once during the operating season or before storing it when it will not be in use for a long period.

Cleaning

Turn off the heater and then unplug it from power. Use only a soft cloth to wipe the outer surfaces gently. Do not use any cleaning agents or detergents.
Never immerse the heater in water and allow water to drip into the motor housing. Be careful not to get the heating element and switches wet.
The filter can be removed when cleaning. Dry the filter before installing it back in the heater. The filter must be installed before using the heater.

Note: Do not allow water to infiltrate into the heater's interior as this could result in a fire or electric shock hazard.
Maintenance
For storage, you may leave the heater covered to protect it from dust. Store it in a cool, dry location and arrange the power cord away from high foot-traffic areas so that it will not be tripped over or damaged.

Troubleshooting

Note: The troubleshooting section below is for solving frequently asked questions for the heater unit. If your problem persists, please contact customer support.


Problem	Possible Cause	Solution
The plug of the heater is hot.	The power plug and the outlet are not securely connected.	Securely reinsert the plug into the socket. If necessary, you should have a qualifiedheater for electrician to check whether power plug prongs are intact.
The heater cannot be turned on.	The power switch on the backis turned off.	Turn on the power switch on the back.
The heater suddenly shuts down when hot air is coming out.	Failed to supply power to the heater.The overheating protection has been triggered.	Ensure your circuit breaker or fuseis working properly. Unplug from the outlet and cool it down. Check and remove any objects on or adjacent to the heater. Wait 30 minutes before heater unplugging the heater back in.
	The Tip-over and Motion Protection has been triggered.	Place the heater on a firm, flat, and level surface free from obstructions. Keep it upright and turn it on again.
	The Overheating Protection has been triggered.	Unplug from power and wait for 30 minutes for the heater to cool down before plugging back in. The heater will automatically turnon again when the surrounding temperature is below 122℉ (50℃).
The oscillation fails around 14℉(-10℃).	The characteristics of grease in motor.	Start the oscillation again after turning on the heaterfor a while.

Pros & Cons of Smart Heater H7130

Pros

Energy-efficient heating with adjustable thermostat
Compatible with Amazon Alexa and Google Assistant
Stylish and compact design
Easy to use and set up

Cons

May not be powerful enough for larger spaces
The heater can be noisy on higher settings

Customer Reviews of Govee H7130

Customers love the Govee Smart Heater for its stylish design and energy-efficient heating. The heater's smart capabilities and easy-to-use interface have also received high praise. However, some customers have noted that the heater can be noisy on higher settings and may not be powerful enough for larger spaces.

Search Manuals in: h7130

Read More