Introduction of Midwest Critter Nation Homes For Pet 162

Midwest Critter Nation Homes For Pet 162 is a top-of-the-line small animal cage that offers a spacious and comfortable living space for your pets. It is perfect for small animals such as rabbits, guinea pigs, chinchillas, and ferrets. This deluxe critter cage has an estimated price range of $200 to $250 and is now available in the market.

Parts Identifications

parts_identification_midwest_critter_nation_homes_for_pet_162.png

A Door Panel (2)
Large rectangular panel with (2) doors and latch knobs
B Back Panel (2)
Large rectangular panel without doors
C Side Panel (4)
Smaller rectangular panel with protruding locking tabs at the top
D Top Panel Grid
Large rectangular panel with cone shape connecting pins on all 4 corners
E Bottom Shelf Grid
Large rectangular mesh panel with wider spacing between the wires
F Bottom Floor Panel Grid
Large rectangular mesh panel
G Middle Floor Panel Grid
Large rectangular mesh panel with a cut-out opening in corner
H Bottom Pan
Plastic tray that fits in the bottom of the cage
I Middle Pan
Plastic tray that fits in the middle of the cage
J Ramp (3), Clips (4), and Cover (3)
Wire ramp for access from one level to the other. (Note: There is a slight bend in the middle. This is intentional.) Clips attach Ramp to Shelf and reversible Cover slips over the ramp
K Base: Side Supports (2)
Main structural components or the base
L Base: Base Supports (4)
Two with multiple holes, Two without holes
M Casters (4)
Two locking, two non-locking. Inserted into sleeves in the base
N Shelf (2)
Wire structure with plastic sheet insert
O Phillips Head Bolts (8) with (8) Washers
P Flat Head Screws (2)
Q Swivel Locks (2)
R Phillips Head Screwdriver

Detailed Specifications

The Midwest Critter Nation Homes For Pet 162 is a large cage that measures 32.5 inches long, 25 inches wide, and 63 inches tall. It has a total of four ramps and three platforms that provide multiple levels for your pets to explore. The cage is made of durable steel wire with a powder-coated finish that is easy to clean and resistant to corrosion. It also includes a pull-out tray for easy waste removal and a tip-proof food dish.

Features

There are many unique features of this cage. Listed below are explanations of these features.

Removable, Plastic Less-Mess Shelf pan can easily be lifted off for cleaning.
Reversible, Washable, “Happy Feet” Ramp Cover is included. It slips easily, but securely, over the ramp. Be sure to slip on each cover starting from the bottom of the ramp so the ramp hooks are exposed at the top.
No-Doubt Door Latches The squeeze point latches are easy for humans to operate, but impossible for pets! When closing and latching the doors, be sure the spring-loaded rods have been fully inserted into the holes in the door frame. To help make this easier, there is a plate at the top and the bottom in the middle of the door frame. This will line up the door so the rod will fit right into the holes.
Accessory Hangers You’ll notice a number of loops on the underside of the shelves. These convenient loops are for attaching toys, hammocks, tubes, etc.
Another Full Level Floor? Install 2 shelves directly across from each other, and it will create another full level. Locking Casters The front casters can be locked to prevent any unwanted movement of the cage.
Out Of The Way The ramp which allows access between the top level and the bottom level can be secured in the up position to separate pets, or to keep them out of the way while cleaning and feeding.
Removable Doors The Critter Nation cage allows you the option of totally removing each door. Open the door and lift the door straight up.

Assembly Instructions

NOTE: Although the Critter Nation can be assembled by one person, due to size, you may find it easier assembled with two people. A rubber mallet is also recommended.

Locate the Side Supports for the Base (K), two Base Supports, one with multiple holes and one without holes (L), and four Phillips Head Bolts with four washers (O). Orientate the Side Supports so the side with the holes in the tubes face inward and are at the bottom. Attach the Base Support with multiple holes to the bottom of the Side Supports and attach the Base Support without holes to the top by screwing a Phillips Head Bolt with Washer to outside of each Side Support.
Slightly separate the open ends of the base to allow the Bottom Shelf Grid (E) to fit in. Align the protruding wires with the holes in the base. Pull sides back together.
Attach the remaining Base Supports (L) to the Side Supports by screwing a Phillips Head Bolt with Washer to the outside of each Side Support. The Base Support with multiple holes aligns with Bottom Shelf Grid.
Locate the 4 Casters (M- 2 locking, 2 non-locking). Insert the post of the caster into the pre-inserted sleeve in the bottom of the Base. Be sure that the 2 locking casters are on one long side, and the 2 non-locking casters are on the opposite side. To fully secure the casters in the sleeves, push the caster in by hand or push down on the frame of the stand with your hand or foot.

(Note: The side with both locking casters will now become the “front” of the cage.)
Locate the Door Panel (A) and insert the pegs into the outer-most holes of the Base Assembly. The Door Panel should be inserted on the side of the stand that has the two locking casters. Be sure the door locking knobs face outward.
Locate the Bottom Floor Panel Grid (F) and insert the protruding wires into the corresponding holes of the Door Panel. Be sure the wires that run front to back on the grid are on the top.
Locate the Back Panel (B) and insert one peg in one of the back, outer-most holes. Be sure the protruding rectangular openings are facing inward. While slightly lifting the Bottom Floor Panel Grid, swing the other end of the back panel around, aligning the protruding wires of the Grid with the holes in the Back Panel. When they are all lined up and inserted, put the peg in the outer-most hole.
Locate two of the Side Panels (C). Insert the pegs into the holes between the Door and Back Panels. Be sure the cut-outs on the bottom go around the protruding wires of the Bottom Floor Panel Grid. Insert the protruding tabs at the top of the panels into the protruding openings in the Door and Back Panels to lock the panels together.
Locate the remaining Door Panel (A) and insert the pegs into the outer-most holes of the Base Assembly. The Door Panel should be inserted on the side of the stand that has the two locking casters. Be sure the door locking knobs face outward.
Locate the Middle Floor Panel Grid (G) and insert the protruding wires into the corresponding holes of the Door Panel. Orientate the panel so the opening is either in the back-right or front left of the cage.
Locate the remaining Back Panel (B) and insert one peg in one of the back, outer-most holes. Be sure the protruding rectangular openings are facing inward. While slightly lifting the Middle Floor Panel Grid, swing the other end of the back panel around, aligning the protruding wires of the Grid with the holes in the Back Panel. When they are all lined up and inserted, put the peg in the outer-most hole.
Locate the remaining two Side Panels (C), two Swivel Locks (Q), and two Flat Head Screws (P). Using the Phillips Head Screwdriver (R) and flat head screws attach one Swivel Lock to each of the Side Panels. (Do not tighten all the way).
Attach the Side Panels by inserting the pegs into the holes between the Door and Back Panels. Be sure the cut-outs on the bottom go around the protruding wires of the Bottom Floor Panel Grid. Insert the protruding tabs at the top of the panels into the protruding openings in the Door and Back Panels to lock the panels together.
Locate the Top Panel Grid (D). Lay the Top Panel Grid on the top of the assembled Cage. Line up the panel so the pegs in the corner line up with the openings in the corners of the assembled cage. To secure the Top Panel, swing the Swivel Lock around the wire of the Top Panel till tight in place. It may be easier to open doors and swing Swivel Lock from side of cage. Open the doors by pinching the knobs on the doors together.
Once Swivel Lock is in place, tighten Flat Head Screw.
Insert the Bottom Pan (H) in the bottom unit, and the Middle Pan (I) in the upper unit. Be sure the cut-out is positioned to match the opening in the Middle Panel Grid Floor.
Note: The Shelves, in conjunction with the Side Panels, can be positioned at 3 different levels on either side of the cage.
Locate one Shelf (N). With the doors in the top unit open, tilt the Shelf down and insert the end of the hook in the middle holes on the right side of the top unit. Lift the Shelf up and let hook fall into place.
Before inserting the Shelf in the bottom unit, install the Ramp (J) that will allows access from one level to the next. Attach the hooks on the end of the ramp to the back wire in the opening of the Middle Panel Grid.
This ramp has the ability to be secured in the “up” position to section off the top level from the bottom level. Before inserting the Shelf in the bottom unit, swing this ramp up and hook it with the attached “S” hook.
Install Shelf in bottom unit as in Step 16.
Attatch the Ramp Clips to each ramp by inserting the two hooks on the ramp into the holes on the Ramp Clips. The hooks on the ramp and the hooks on the Ramp Clips should be facing the same direction.
Attach the Ramps to the Shelves by hooking the Ramp Clips to the wire on the Shelf as illustrated. The lip of the plastic Shelf pan will cover the Ramp Clips.

Description

The Midwest Critter Nation Homes For Pet 162 is a high-quality cage that offers a spacious and comfortable living space for your small pets. It is designed with your pet's needs in mind, providing multiple levels for them to explore and play. The cage is made of durable steel wire with a powder-coated finish that is easy to clean and resistant to corrosion. The pull-out tray makes waste removal easy, and the tip-proof food dish ensures that your pets' food stays in place. The cage also includes adjustable shelves, ramps, and a removable solid shelf for added customization.

Midwest Critter Nation Homes For Pet 162 Setup Guide

Setting up the Midwest Critter Nation Homes For Pet 162 is easy and straightforward. First, assemble the cage frame by attaching the side panels to the base using the included screws. Next, attach the top panels to the frame and secure them in place. Then, install the ramps and shelves according to your preference. Once the cage is assembled, add your pets' bedding, toys, and accessories. Finally, add your pets and enjoy watching them explore their new home.

Troubleshooting

Here are some common problems and solutions for the Midwest Critter Nation Homes For Pet 162:

Problem: The cage rattles or shakes when my pets move around.
Solution: Check that all screws are tight and secure. If the problem persists, you can add additional screws or clips to further secure the panels in place.
Problem: My pets are chewing on the wire.
Solution: Provide your pets with plenty of chew toys and accessories to keep them occupied. You can also cover the bottom edge of the cage with a protective cover to prevent chewing.

Warranty

For one (1) year from the date of original purchase, MIDWEST Homes For Pets (“MIDWEST”) warrants to the purchaser of this Critter Nation that, should it prove defective by reason of improper workmanship and/or material, MIDWEST will repair or replace, at its option, any defective part of the Critter Nation , without charge for the part or for shipping. Replacement parts are warranted for the remainder of the original period.

Midwest Critter Nation Homes Pros & Cons

Pros

Large and spacious cage
Multiple levels for pets to explore
Durable and easy to clean
Adjustable shelves and ramps
Pull-out tray for easy waste removal

Cons

Expensive compared to other small animal cages
May be too large for some living spaces
Some pets may be able to escape if not properly supervised

Customer Reviews about Midwest Critter Nation Homes For Pet 162

"I love this cage! My rabbits have so much room to play and explore. The ramps and shelves are a great addition, and the pull-out tray makes cleaning so easy." - Sarah W.

"This cage is amazing! My guinea pigs love the multiple levels and the removable shelf is a great addition. The cage is sturdy and easy to clean." - Mark T.

"I would highly recommend this cage to anyone looking for a high-quality small animal cage. The price is a bit high, but it is worth it for the spacious and customizable design." - Emily P.

Common complaints from customers include the high price point, the size being too large for some living spaces, and some pets being able to escape if not properly supervised.

Search Manuals in: homes-for-pet

Read More