Introduction

The Philips Stain Perfect Cordless Epilator HP6576 is an innovative hair removal device designed for effortless and efficient grooming. Featuring advanced technology, this cordless epilator provides a gentle yet effective hair removal experience, ensuring smooth skin without irritation. Priced at approximately $79.99, its ergonomic design allows for easy handling, while the built-in light helps users spot fine hairs for a thorough epilation. Ideal for both beginners and experienced users, the Philips HP6576 enhances your beauty routine.

Philips Stain Perfect Cordless Epilator HP6576 Specifications

Cordless design with rechargeable battery
Multiple speed settings for adjustable hair removal
Ergonomic handle for comfortable grip and easy maneuverability
Washable epilator head for easy cleaning and hygiene
LED light to illuminate the skin and help find fine hairs
Travel pouch included for convenient storage and travel

Features

Epilator
Charging light
Speed setting indications
On/off button
- Press once for speed II
- Press twice for speed I
Opti-light
Epilating discs
Release button
Basic epilation cap
Shave, trim and style attachment
Trimming comb
Optimal performance cap
Hair primer
Active hairlifter with active massage
Active massaging roller
Active hairlifter
Cleaning brush
Adapter
Luxury pouch

IMPORTANT
The following information and precautions are important when epilating:

CAUTION: Methods of removing hair by the root can cause in-grown hairs and minor skin injuries. Please consult your doctor if you have any questions about the use of an epilator.
Do not use the epilator if you suffer from varicose veins, rashes, spots or blemishes, or when the skin is irritated or if you have in-grown hairs or a tendency to produce in-grown hairs. Consult your doctor first.
Any minor injury resulting from hair removal may allow bacteria to penetrate the injury site potentially causing small scars or a change in pigmentation of the skin. The risk of infection may be minimized by thoroughly cleaning the rotating discs before and/or after each use.
The epilator should only be used after prior consultation with your doctor if you have or experience:
- Open wounds
- Eczema, psoriasis (scaly eczema), inflamed skin reactions such as folliculitis, skin rashes, or the tendency to allergy or allergic skin reactions
- Immune deficiency or disorders
- Couperose, rosacea, or varicose veins
- Pregnancy
- Reduced skin immunity as a result of diabetes, pregnancy, Raynaud's disease, etc.
- Hemophilia
- If you have moles, raised skin bumps, etc.
If you have been or have begun taking hormone medication, or have recently been pregnant, a change in your hormone levels may influence the thickness, color or amount of hair growth. This is caused by the hormonal changes, not by this method of hair removal.
Clean the epilating head after each use following CLEANING instructions.

Description

The Philips Stain Perfect Cordless Epilator HP6576 features a sleek and ergonomic design, making it easy to handle and operate. The device comes with multiple speed settings, allowing users to adjust the epilation speed according to their comfort level. The washable epilator head ensures easy cleaning and maintains hygiene, while the LED light helps illuminate the skin to catch even the finest hairs.

The cordless functionality and rechargeable battery make this epilator highly convenient for use at home or on the go. The travel pouch provided adds an extra layer of convenience for storage and travel.

To Charge/Recharge

Fully charge the Epilator before using for the first time or after non-use for a long period of time.

Charging, recharging, or using an Epilator at temperatures below 40'F or higher than 95 ° F adversely affects the lifespan of the battery.

Be certain the Epilator is OFF.
Insert the appliance plug directly into the Epilator (Fig. 1) and plug the adapter into any 120V AC outlet. Use only the cord provided.
The Charging Light on the appliance will blink to indicate the Epilator is charging (Fig. 2).
It will take approximately 1 hour to fully charge the Epilator for a cordless operating time of up to 40 minutes.
After the Epilator is fully charged, the charging light will light up white continuously (Fig. 3).
NOTE: After 20 minutes the charging light goes out.
If the batteries run low while using, the Charging Light will blink red.
If the batteries are completely empty, the Charging Light lights up red continuously. Simply connect the cord provided to the Epilator and outlet to continue epilating.
Disconnect the cord and unplug from the electrical outlet.

How to Use Your Epilator

Use this Epilator for its intended household use as described in this manual.
Make sure your skin is clean, free from grease and creams. Do not apply any cream before using. Hairs are easier to remove after a bath or a shower, but your skin should be completely dry before using your Epilator.
Epilation is easier and more comfortable when the hair has the optimum length of 1/8 - S/32in/3-4mm. If the hairs are longer, use the shave, trim, and style attachment with the trimming comb to trim hairs to the optimum length.
Regular massages with an exfoliation glove or loofah pad at least 2 days before epilating may help prevent in-grown hairs.
If you experience some skin irritation after epilating, epilate in the evening as most skin irritation disappears overnight. This effect will gradually lessen with each use.
After each use, you may want to apply a nonalcohol-based mild cream or body lotion which will help reduce the possibility of skin irritation. Be certain it does not contain alcohol as it may cause discomfort.

Epilating the legs

If you already have some experience with epilation, simply use the epilating head with the basic epilation cap.
If you are new to epilation, start epilating with the optimal performance cap. This cap ensures optimal skin contact and its pivoting head stretches the skin and prepares the hairs for epilation.
If your hairs lie flat on your skin, use the active hair lifter with an active massage. The active hair lifter with active massage not only lifts up the hairs but its active massaging roller also minimizes the pulling sensation of epilation.

Before first use, clean the epilating head. See the 'Cleaning' section.
Press both sides of the basic epilation cap (1) and pull it off the appliance (2) (Fig. 4).
NOTE: Remove the basic epilation cap before you attach the optimal performance cap or the active hair lifter with active massage.
Put the desired attachment on the epilating head (Fig. 5).
NOTE: The attachments will only fit onto the appliance in one direction.
Press the on/off button once to switch on the Epilator.
- The Epilator starts running at Speed II and the bottom speed setting indication II on the Epilator lights up (Fig. 6).
  Select Speed II (high speed) for larger surfaces and thicker hair areas.
- If you want to use speed I, press the on/off button a second time. The top speed setting indication I light up on the Epilator (Fig. 7).
  Select Speed I for areas with little hair growth, for hard-to-reach places, and for areas with bones close to the skin's surface, such as knees and ankles.
- When you press the on/off button a third time, the epilator switches off.
Hold the Epilator perpendicular to your leg at a 90-degree angle with the ON/OFF button pointing in the direction you are going to move the appliance (Fig. 8).
Keep the skin taut using your fingers to stretch the skin so the rotating discs can grasp the raised hairs.
- When you use the optimal performance cap, make sure both rollers of the hair primer always stay in contact with the skin to ensure an optimal result.
- When you use the active hairlifter with active massage, make sure the active massaging roller and the active hairlifter always stay in contact with the skin.The massaging roller stimulates and relaxes the skin.
Gently press and move the Epilator slowly over the skin against the direction of hair growth. If you press too lightly or too hard, the Epilator will not be able to grasp and remove the hairs. Experiment until you find the right settings and right amount of pressure for your type of skin and hair.
Press the ON/OFF button to turn the Epilator OFF and clean.

IMPORTANT:

After using the Epilator, some redness or irritation may occur.This is normal and should disappear quickly.
This appliance is only intended for removing hair below the neck: underarms, bikini area and legs. Do not use it for any other purpose.
Clean the appliance after each use following CLEANING instructions.

Shaving the underarms and bikini line

Use the shave, trim and style attachment to shave sensitive areas such as the underarms and the bikini line. If the shaving head foil and cutters show signs of wear or are damaged, do not use as injury may occur. Replace the shaving head.

Press the release button (1) on the side of the Epilator and remove the epilating head from the Epilator (2) (Fig. 9).
Put the shave, trim and style attachment without the trimming comb on the appliance. You will hear a click (Fig. 10).
Note: The shave, trim and style attachment will only fit on the appliance in one direction.
Press the ON/OFF button once to switch on the appliance.
Note: Use speed II to shave.
Stretch the skin with your free hand. When shaving underarms, raise your arm to stretch the skin.
Hold the appliance perpendicular to your skin at a 90° degree angle with the ON/OFF button pointing in the direction you are going to move the appliance (Fig. 11 and Fig. 12).
Move the appliance slowly against the the direction of hair growth.
Note: Make sure the surface of the shave. trim and style attachment always stays io contact with the skin,
Turn off the appliance and clean the shave, trim and style attachment (see section 'Cleaning').

Trimming with the trimming comb

Use the shave, trim and style attachment with the trimming comb to trim your bikini line to a length of 1 /8in./3mm or to pretrim long hairs (longer than 13/32in./10mm) on the underarms or
bikini line.

Press the release button (1) on the side of the Epilator and remove the epilating head from the Epilator (2) (Fig. 9).
Put the shave, trim and style attachment on the appliance.You will hear a click (Fig. 10).
Put the trimming comb on the shave, trim and style attachment until it snaps in place (Fig. 13).
Note: The trimming comb will only fit onto the shave. trim and style attachment in one direction.
Press the ON/OFF button once to switch on the appliance.
Note: Use Speed II to trim with the shave trim and style attachment.
Stretch the skin with your free hand. When trimming underarms, raise your arm to stretch the skin.
Hold the appliance perpendicular to your skin at a 90-degree angle with the ON/OFF button pointing in the direction you are going to move the appliance.
Move the appliance slowly against the direction of hair growth.
Note: Make sure the surface of the trimming comb always stays fully in contact with the skin to ensure an even trimming result
If hairs have accumulated in the comb area, remove hairs by shaking, blowing or using cleaning brush provided.
Turn off the appliance and clean the attachment and the comb (see section 'Cleaning').

Overheat protection

Note: To avoid overheating of the epilatoc do not press the appliance too hard onto your skin The Epilator works best when you move it over your skin without exerting any pressure

If the overheat protection is activated, the appliance turns off automatically.
The speed setting indications and the charging light blink red.
Let the appliance cool down.
The lights stop blinking after 30 seconds.
When the appliance has cooled down, you can turn it on again.
If the lights start to blink red again, the appliance has not yet cooled down completely.

Overload protection

If you press the epilating head too hard onto your skin or when the rotating discs of the epilating head get blocked, the appliance stops and the speed setting indications start to blink red for 5 seconds.

Turn off appliance.
Check if the rotating discs of the epilating head are blocked by turning the discs with your thumb. Remove any blockage from the rotating discs.
Turn on the appliance again.

Travel lock
The Epilator has an integrated travel lock which prevents the appliance from accidentally being switched on during travel.

To activate the travel lock, press and hold the ON/OFF button for 3 seconds until the speed setting indications blink white 2 times (Fig. 14).
The Epilator starts running and stops immediately when the travel lock becomes active.
To deactivate the travel lock, press and hold the on/off button for 3 seconds until the speed setting indications blink white 2 times (Fig. 15).
NOTE: The travel lock is deactivated automatically when you connect the appliance to the outlet.

Setup Guide

To operate the Philips Stain Perfect Cordless Epilator HP6576,

Start by charging the device according to the manufacturer's instructions.
Once charged, remove the epilator head from the device and rinse it with water if needed.
Apply a gentle skin cleanser before epilation for better results.
Hold the epilator at a 90-degree angle to your skin and move it slowly in the direction of hair growth.
Use the multiple speed settings as needed for comfort and efficiency.
After use, clean the epilator head with water and store it in the provided travel pouch.

Cleaning

IMPORTANT

Always switch the Epilator OFF and remove plug from electrical outlet and epilator before cleaning.
Never immerse this appliance in water.
Do not use scouring pads, abrasive cleaners or aggressive liquids such as gasoline or acetone to clean the Epilator.

Cleaning the Epilator Head and attachments

It is essential for hygienic reasons and optimum performance that the epilating head, attachments and rotating discs are cleaned after each use.
Never clean, remove, or replace epilating head or attachments while motor is ON. The rotating discs are not removable from the epilating head.
Do not apply pressure or touch rotating discs with hard objects as this may dent or damage the discs. If damage occurs, discontinue use immediately.

Remove the epilating head by pressing the release knob (1) and remove epilating head from the appliance (2) (Fig. 9).
Remove loose hairs from the epilating discs and attachments with the brush (Fig. 16).
Never try to detach the epilating discs from the appliance.
Rinse the attachments thoroughly under warm tap water.
Rinse the epilating head thoroughly under warm tap water while turning the discs with your thumb (Fig. 17).
Shake off excess water (Fig. 18) and dry epilating head and attachments completely with a soft towel.
Do not replace the epilator head and attachments onto the appliance until it is completely dry.
Place the epilating head back onto the appliance and press until it snaps into place.
You will hear a click (Fig. 19).
The epilating head only fits onto the appliance in one direction.

Cleaning the shave, trim, and style attachment, and the trimming comb

Do not apply pressure to the shaving head. Do not touch foil with hard objects as this may dent or damage foil or cutters. If damage occurs, replace damaged parts.

Remove the trimming comb, if attached, by pulling it off the shave, trim and style attachment (Fig. 20).
Press the release knob (1) and remove the shave, trim, and style attachment from the appliance (2) (Fig. 21 ).
Remove the shaving unit from the shave, trim, and style attachment (Fig. 22).
Rinse the shaving unit, the shave, trim and style attachment, and the trimming comb under a lukewarm tap water while turning them (Fig. 23).
Shake off excess water from the shaving unit, the shave, tri,m and style attachment and the trimming comb (Fig. 24) and dry completely with a soft towel.
Reattach the shaving unit to the shave, trim, and style attachment. Place the shave, trim and style attachment on the appliance and press until it snaps into place.You will hear a click.
Put the trimming comb on the shave, trim, and style attachment.

Storage

Be sure Epilator is turned OFF. Remove cord from outlet and Epilacor before scoring in a safe, dry location where it will not be crushed, banged, or subject to damage.
Do not wrap cord around Epilator when storing.
Store cord in a safe location where it will not be cut or damaged.
Do not place or store Epilator where it can fall or be pulled into a tub or sink, water or other liquid while plugged in.
Store the Epilator, attachments, and accessories in the pouch provided.

Battery Removal

This Philips Epilator contains a Lithium-Ion battery which must be disposed of properly (Fig. 25).
The battery may only be removed when Epilator is to be discarded.

Unplug the electrical cord from the outlet and Epilator before dismantling the Epilator.
Allow the Epilator to run until the battery is empty/depleted.
Turn Epilator OFF. 119 Remove the epilating head and any attachments.
Remove the side panels of the Epilator with a screwdriver (Fig. 26).
Insert a screwdriver into the groove next to the socket for the appliance plug in the bottom of the appliance. Turn the screwdriver to separate the two housing halves (Fig. 27).
Remove the battery holder with the batteries from the appliance. Remove the batteries from the battery holder with a screwdriver {Fig. 28).
Cut the wires with a pair of household scissors (Fig. 29).
Do not attempt to replace batteries. Insulate battery ends by covering with tape and/or place batteries in a small plastic bag.
Discard your Epilator. Do not attempt to plug an electrical cord into the outlet or recharge Epilacor after the batteries have been removed.

Full Two-Year Warranty

Philips Electronics North America Corporation warrants each new Philips product. Model HP6576/S0 against defects in materials or workmanship for two years from the date of purchase. and agrees to repair or replace any defective product without charge.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse, or abuse. lack of reasonable use, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.

45-DAY MONEY-BACK GUARANTEE
If you are not fully satisfied with your Philips Epilator, send the product back and we'll refund you the full purchase price.

The Epilator must be shipped prepaid by insured mail, insurance prepaid, and have the original sales receipt, indicating purchase price and the date of purchase, enclosed. We cannot be responsible for lost mail. The Epilator must be postmarked no later than 45 days after the date of purchase. Philips reserves the right to verify the purchase price of the product and limit refunds not to exceed the suggested retail price.

Troubleshooting

If you encounter any issues with your Philips Stain Perfect Cordless Epilator HP6576, here are some common problems and solutions:

Device not turning on: Check if the battery is fully charged. Ensure proper connection of the charger.
Pain during epilation: Use a gentle skin cleanser before epilation and consider using a cooling gel afterward to soothe the skin.
Hair not being removed efficiently: Ensure you are moving the epilator in the direction of hair growth. Adjust speed settings as needed.

Instructions and Warnings: Always follow the manufacturer's instructions. Avoid using the epilator on broken or irritated skin, and do not share personal grooming devices.

Philips Stain Perfect Cordless Epilator HP6576 Pros & Cons

Pros

Cordless and rechargeable for convenience
Multiple speed settings for adjustable comfort
Ergonomic design for easy handling
LED light for better visibility of fine hairs
Washable epilator head for hygiene and ease of cleaning

Cons

Potential pain during use, especially for sensitive areas
May require multiple passes to remove all hair effectively
Battery life may vary depending on usage

Customer Reviews

Customers have generally praised the Philips Stain Perfect Cordless Epilator HP6576 for its ease of use and effectiveness. Many appreciate the cordless design and adjustable speed settings, which make it comfortable to use on various body parts. However, some users have noted that it can be painful, especially for sensitive areas, and may require multiple passes to achieve desired results.

Search Manuals in: hp6576

Read More