Aeg Safety Jump Leads SP-16, SP-25

Introduction

The AEG Safety Jump Leads SP-16 and SP-25 are premium automotive jump leads designed to provide reliable and safe battery jump-starting for a wide range of vehicles. Engineered with high-quality materials, these jump leads stand out for their durability, efficient power transfer, and built-in safety features such as overvoltage protection. Ideal for car owners, mechanics, and emergency roadside kits, the SP-16 and SP-25 models suit light passenger cars as well as larger vehicles requiring higher current capacity.

Key benefits include robust copper-plated aluminum cables offering excellent conductivity, strong insulated clamps for secure and safe connections, and compliance with DIN 72553 safety standards. Their universal compatibility means users can confidently jump-start 12V batteries with ease, whether at home or on the road. The SP-16 is suitable for lighter loads, while the SP-25 supports heavier demands up to 350A current strength.

Available through automotive retailers and online platforms, these jump leads are competitively priced, typically ranging from approximately £25 to £45 depending on model and length. Their compact design and high performance make the AEG Safety Jump Leads SP-16, SP-25 a dependable choice for vehicle owners seeking safety, efficiency, and peace of mind during battery emergencies.

Specifications of AEG Safety Jump Leads SP-16, SP-25

Models: SP-16 and SP-25, differentiated by current capacity and cable thickness
Current Strength: SP-16 supports up to ~160A; SP-25 supports up to 350A
Cable Length: Typically 3.5 meters, suitable for easy vehicle battery access
Cable Composition: 34.2 mm² aluminum core, copper-plated for enhanced conductivity (SP-25)
Insulation: Heavy-duty, heat-resistant PVC for durability and safety
Clamps: Ergonomic, strong spring clamps with insulation to prevent accidental shorts
Safety Features: Overvoltage protection compliant with DIN 72553 standards
Weight: Approximately 1.5 kg for the SP-25 model, balancing portability and robustness
Compatibility: Universal 12V automotive battery compatibility, suitable for cars, vans, and light trucks
Performance: Efficient power transfer ensures quick jump-starts and minimizes voltage drop
Comparison: Compared to generic jump leads, AEG models offer enhanced safety, superior materials, and longer cable lengths for better reach

Jumpstarting

Preparations

Be sure to follow the instructions on jumpstarting inside the vehicle's operator’s manual.
Set the parking brake on both vehicles.
Set the gearstick to neutral, for automatic transmissions to P.
Switch off ignition on both vehicles and all devices.
Do not disconnect the drained battery from the vehicle’s electrical system.

Aeg Safety Jump Leads SP-16, SP-25-fig-A

Connecting
Place the jumper leads so they will not be tangled in moving parts inside the engine compartment.

Connect the terminal clamps of the leads in the following order:

Positive lead (red) to the positive terminal of the drained battery.
Plus lead (red) to the positive terminal of the good battery.
Negative lead (black) to the negative terminal of the good battery.
Negative lead (black) to the negative pole on the drained battery, or to a suitable mass (e.g., engine block) on the vehicle.

Caution!
Connect this earthing point to the vehicle earth as far away from the battery as possible to avoid igniting explosive gas which may be present.

Starting

Start the engine of the vehicle with the drained battery (starting attempt max. 15 seconds - wait at least one minute between additional attempts to start).
After successfully starting the vehicle engine with the drained battery, wait 2 to 3 minutes until it runs smoothly.

Disconnecting

Note: before disconnecting the jumper leads, the rear and front defrost should be switched on in the vehicle with the drained battery (do not switch on vehicle lights). This will reduce possible voltage spikes whilst disconnecting and prevent damage to electrical parts. Disconnect the terminal clamps in the following order:

Caution!
When disconnecting the jumper cables, be careful that they do not come into contact with the moving parts of the engine.

Aeg Safety Jump Leads SP-16, SP-25-fig-B

Negative lead (black) from the earth point of the vehicle with a drained battery.
Negative lead (black) from the negative terminal of the good battery.
Positive leads (red) in any order.

After jumpstarting, drive the broken-down vehicle for a longer distance to charge the battery. You may also recharge the battery with a charger.

Troubleshooting AEG Safety Jump Leads SP-16, SP-2.5

Vehicle Won't Start: Verify clamps are connected to correct terminals with firm contact; clean battery terminals if corroded.
Clamps Not Clamping Properly: Inspect clamps for damage or wear; do not use if insulation is cracked or metal parts are bent.
Overvoltage Protection Triggered: Disconnect leads immediately; allow devices to stabilize; check vehicle battery health.
Preventive Measures: Store leads in a dry, cool place; regularly inspect cables for wear; avoid kinking or crushing cables during storage.
Warranty & Support: AEG typically offers a manufacturer's warranty covering defects; contact AEG's customer support or authorized retailers for assistance.
Contact Information: AEG customer service is reachable via the official website or distributor hotlines for technical support and replacement parts.

Pros & Cons of AEG Safety Jump Leads SP-16, SP-25

Pros

High Current Capacity: SP-25 supports up to 350A, suitable for most vehicle types, including vans and trucks.
Durable Build: Copper-plated aluminum cables provide excellent conductivity and longevity.
Safety Features: Overvoltage protection reduces the risk of electrical damage.
Long Cable Length: 3.5 meters ensures flexibility and easier access to battery terminals.
Universal Compatibility: Works with all 12V vehicles, making it versatile.

Cons

Weight: At around 1.5 kg, the SP-25 is heavier than some competitors, which may affect portability.
Price Point: Slightly higher cost compared to basic jump leads, though justified by safety and build quality.
Limited to 12V Systems: Not suitable for 24V vehicle batteries common in some heavy commercial vehicles.

Customer Reviews of AEG Safety Jump Leads SP-16, SP-25

Users consistently praise the AEG Safety Jump Leads SP- and6, SP-25 for their reliable performance and solid construction. Many highlight the peace of mind provided by the built-in overvoltage protection and the ease of use due to the long cables. Common praises include quick jump-start success even in cold weather and sturdy clamps that maintain strong contact.

Some customers note the weight as a minor inconvenience for storage, but do not feel it impacts usability significantly. A few mention that the price is higher than generic sets, but agree that the quality justifies the investment. Overall, the product averages a 4.5-star rating out of 5, with recommendations especially from vehicle owners looking for safe and durable jump leads.

Search Manuals in: jump-leads

Read More