Shure KSM141 Dual-Pattern Instrument Microphone: Comprehensive Product Manual

Introduction to the Shure KSM141 Dual-Pattern Instrument Microphone

The Shure KSM141 Dual-Pattern Instrument Microphone is a premium small-diaphragm condenser mic designed for capturing acoustic instruments with exceptional clarity and detail. Featuring a unique rotating collar for seamless switching between cardioid and omnidirectional polar patterns, this end-addressed electret condenser delivers superior transient response thanks to its ultra-thin 2.5-micron, 24-karat gold-layered Mylar diaphragm. Class A discrete transformerless preamplifier ensures transparency, low self-noise of 14 dB SPL-A, and no crossover distortion, making it ideal for studio recording and live sound.[1][2][6]

Key benefits include handling extremely high SPLs up to 170 dB with pads (0, -15, -25 dB), a subsonic filter below 17 Hz to eliminate rumble, and three-position low-frequency roll-off switches (flat, -6 dB/octave at 115 Hz, -18 dB/octave at 80 Hz) for versatile noise control. Targeted at professional musicians, audio engineers, and producers, the Shure KSM141 excels in miking acoustic guitars, pianos, drums, brass, woodwinds, orchestral ensembles, and room ambience. Its rugged build suits both studio and stage use, with gold-plated connectors for reliability.[1][3][4]

Priced typically between $300-$400 for a single unit (stereo pairs around $700), it's widely available from authorized Shure dealers. This Shure KSM141 Dual-Pattern Instrument Microphone manual guide optimizes your setup for professional-grade results in instrument recording and live performances.[1][5]

Shure KSM141 Dual-Pattern Instrument Microphone Specifications and Features

The Shure KSM141 Dual-Pattern Instrument Microphone boasts studio-grade specs for precise instrument capture. Here's a detailed breakdown:

Cartridge Type: Electret Condenser with 2.5-micron, 24K gold-layered low-mass Mylar diaphragm (18mm/0.70").[1][2][5]
Polar Patterns: Switchable Cardioid and Omnidirectional via rotating collar for consistent response.[1][2][3]
Frequency Response: 20 Hz - 20 kHz, extended for low-frequency reproduction.[1][2][5]
Max SPL (1 kHz, 1% THD): Pad off: 145/139/134 dB (5k/2.5k/1k Ohm); Pad on: 170/164/159 dB. High output level (+15 dBV with -25 dB pad).[2][3][6]
Sensitivity: -37 dBV/Pa (14.1 mV) at 1 kHz.[2][6]
Self-Noise: 14 dB SPL-A; Signal-to-Noise Ratio: 80 dB.[2][6]
Dynamic Range: 131/125/120 dB (5k/2.5k/1k Ohm).[2]
Output Impedance: 150 Ohms; Common Mode Rejection: ≥50 dB (20-20k Hz).[2][4]
Switches: 3-position pad (0/-15/-25 dB); 3-position low-cut filter (flat, -6 dB/oct @115 Hz, -18 dB/oct @80 Hz); Subsonic filter <17 Hz.[1][3][4]
Connector: XLR male, gold-plated; Includes case, windscreen, clip (stereo pair adds A27M adapter).[1][4]

Compared to AKG C451 B (similar small-diaphragm), the Shure KSM141 offers dual patterns and higher SPL handling, with neutral off-axis response and low self-noise outperforming many in its class.[6]

Troubleshooting the Shure KSM141 Dual-Pattern Instrument Microphone

Common issues with the Shure KSM141 Dual-Pattern Instrument Microphone are rare due to its robust design, but here's how to resolve them:

No Sound/Low Output: Check XLR connections, phantom power (48V required), and pad position. Test cable and preamp. Solution: Verify +48V supply and reseat connectors.[1][7]
Excessive Low-Frequency Rumble: Mechanical vibration from stands. Solution: Engage subsonic filter (<17 Hz) or low-cut switch (80/115 Hz roll-off).[1][3]
Proximity Effect/Background Noise: Use low-frequency filter to counteract bass buildup when close-miking. Solution: Select -18 dB/oct @80 Hz for loud sources like kick drums.[3][4]
Distortion on High SPL: Exceeding limits on drums/guitar cabs. Solution: Activate -15 or -25 dB pad (handles 164-170 dB SPL).[2][3]
RF Interference: Hum from wireless sources. Solution: Use balanced lines; superior RF suppression built-in.[1]

Prevent issues by using shock mounts for live use and storing in provided case. Shure offers 2-year warranty; register at shure.com. Contact Shure support: 1-800-323-8352 (US) or local distributors for repairs.[1][7]

Pros and Cons of the Shure KSM141 Dual-Pattern Instrument Microphone

Pros

Versatile dual patterns (cardioid/omni) with mechanical switch for consistent pickup in ensembles or overheads.[1][2]
Exceptional SPL handling (up to 170 dB) and low 14 dB self-noise, ideal for loud instruments like drums.[2][6]
Neutral, transparent sound with controlled low-end, no resonant peaks; great for acoustic guitar/piano.[3][6]
Useful filters/pads reduce need for EQ; high output minimizes preamp gain.[3]
Rugged for live/studio; excellent value at $300-$400 vs. pricier alternatives like Neumann KM184.[5]

Cons

Requires phantom power; not ideal for battery-powered setups.[7]
Slightly bright treble may need taming on cymbals vs. warmer mics like DPA 4099.[6]
No included shock mount (add separately for stage).[1]
Higher self-noise than ultra-quiet models like Earthworks for classical recording.[6]

Overall, superior value for multi-instrument use compared to single-pattern competitors.

Customer Reviews: Shure KSM141 Dual-Pattern Instrument Microphone Feedback

Users praise the Shure KSM141 Dual-Pattern Instrument Microphone for its reliability, averaging 4.8/5 stars across retailers. "Neutral off-axis response and low self-noise make it perfect for drum overheads—handles 164 dB SPL effortlessly!" (Podcastage review).[6] Acoustic players love the "focused, forward sound with inherent bass roll-off, no EQ needed for guitar."[3]

Common praises: Versatile patterns, high output, build quality. Complaints: Minor brightness on bright sources; "Add a shock mount for live."[6] Testimonials recommend for studios: "Best bang-for-buck SDC—outperforms pricier options on piano/orchestra." Ideal purchase for pros seeking durable instrument mics; addresses SPL/proximity issues effectively.[1][5][6]

Search Manuals in: ksm141

Read More