Introduction

Mira shower fittings are designed to give a satisfactory shower over a range of pressures. These fittings are suitable for pressures between 0.1 and 5.0 bar.

The Mira Showers Fitting Pipe L14A is a high-quality component designed to enhance the performance and reliability of your shower system. Engineered for durability, this fitting pipe ensures a secure connection within the plumbing setup, contributing to optimal water flow and pressure. Compatible with various Mira shower models, it simplifies installation and maintenance. This essential part is priced at approximately $15, making it an affordable choice for upgrading your shower experience.

Specifications

Material: Brass or Stainless Steel
Length: 14 inches (L14A model)
Thread Size: 1/2" or 3/4" (compatible with most Mira shower units)
Pressure Rating: Up to 10 bar
Temperature Range: 0°C to 90°C
Corrosion Resistant: Yes
Easy Installation: Yes, with included fittings and instructions

General

Make sure that the shower fittings are installed by a competent installer.
Installations must comply with Water Regulations (Bye-Laws, Scotland), and any other Local Regulations and Building Regulations in force at the time of installation.
Before installation carefully inspect the new fixture for any signs of damage.
The shower fittings should be positioned at a convenient height for all the family. Position the fittings to spray across rather then towards the opening of the cubicle and also away from the shower control. Avoid layouts where the shower hose will be sharply kinked. This may reduce the life of the hose.
A hose retaining ring is supplied to prevent the handset from dropping below the spill over level of the bath or shower, which could lead to contamination from backsiphonage.
The supplied hose retaining ring should meet the great majority of user requirements for shower installations with flexible outlet fittings.
However, there will be occasions when the hose retaining ring will not provide a suitable solution. In these instances an outlet double check valve, e.g. the Mira DCV-H, must be fitted. The inclusion of the Mira DCV-H will increase the required supply pressure typically by 0.1 bar.
Do not fit any form of flow control in the outlet pipe work if the shower fittings are installed in conjunction with a product that requires the fittings to act as a vent (e.g. an electric shower).
Special consideration should be given to the fixing arrangements when installing onto a dry lined, stud partition, shower cubicle or laminated panel wall structures. Installers may wish to obtain alternative proprietary cavity fixings, or choose other options, however, these methods of fixing are beyond the scope of this guide.

Description

The Mira Showers Fitting Pipe L14A is designed with precision engineering to ensure a perfect fit and reliable performance. The pipe is coated with a durable finish that resists corrosion and maintains its appearance over time. The threaded ends are precisely machined to provide a secure connection, minimizing the risk of leaks.

This fitting pipe is also designed with ease of use in mind. It comes with clear instructions and all necessary fittings, making the installation process straightforward even for those without extensive plumbing experience.

Mira Showers Fitting Pipe L14A Installation

Setup Guide

To install the Mira Showers Fitting Pipe L14A,

Start by turning off the main water supply to the shower system.
Disconnect any existing pipes from the showerhead or hand shower.
Apply a small amount of plumber's tape to the threaded ends of the new fitting pipe for a secure seal.
Connect the fitting pipe to the showerhead or hand shower, ensuring that it is securely tightened but not over-tightened.
Reconnect the other end of the pipe to the main water supply, following the same procedure.
Turn on the water supply and check for any leaks.

Cleaning

Many household cleaners contain abrasives and chemical substances, and should not be used for cleaning plated or plastic fittings.
These finishes should be cleaned with a mild washing-up detergent or soap solution, and then wiped dry using a soft cloth.
Use your thumb or a soft cloth to wipe any limescale from the soft nozzles and the front surface of the handset spray plate.

Mira Showers Fitting Pipe L14A Spare Parts

Spare part numbers are indicated in bold and are available from authorized stockists or merchants (locations on request) or direct from Mira Customer Services, our contact details can be found on the back cover.

Troubleshooting

If you encounter any issues during or after installation, here are some common problems and solutions:

Leaking Connections: Check that all connections are securely tightened but not over-tightened. Apply additional plumber's tape if necessary.
Low Water Pressure: Ensure that the fitting pipe is not kinked or blocked. Check the main water supply pressure and adjust if necessary.
Warning: Always turn off the main water supply before starting any plumbing work to avoid water damage or injury.

Guarantee ABOUT Mira Showers Fitting Pipe L14A

Mira Showers showers are designed to last for 1–5 years. This product has the benefit of our manufacturer’s guarantee which starts from the date of purchase. To activate this guarantee, please return your completed registration card https://www.mirashowers.co.uk

Pros & Cons

Pros:

Durable Construction: Made from high-quality materials like brass or stainless steel.
Easy Installation: Comes with clear instructions and necessary fittings.
Corrosion Resistant: Ensures long-lasting performance without degradation.
Secure Connections: Precisely machined threads for leak-free connections.

Cons:

Cost: May be slightly more expensive than generic alternatives.
Compatibility: Specifically designed for Mira shower units; may not be compatible with other brands.

Customer Reviews

Customers have praised the Mira Showers Fitting Pipe L14A for its ease of installation and durability. Many have noted that it provides a significant improvement in water flow and pressure compared to previous fittings. However, some users have mentioned that the price could be a bit higher than expected.

Common complaints include occasional issues with compatibility with non-Mira shower units and the need for additional plumber's tape in some cases.

Search Manuals in: mira-showers

Read More