Bissell Powersteamer Steam Mop 2685 Guide

Introduction

The Bissell Powersteamer Steam Mop 2685 is a powerful and efficient cleaning tool that utilizes steam technology to eliminate dirt, grime, and bacteria from various surfaces. This versatile mop can be used on hardwood, tile, linoleum, and other sealed floors, making it a must-have for any household. With an estimated price range of $150 to $200, the Bissell Powersteamer Steam Mop 2685 is an investment worth considering for a cleaner and healthier home.

What’s In The Box?

bissell_powersteamer_steam_mop_2685-whatâs_in_the_box.png

Product View

SmartSet Steam Control
Easy Fill Water Tank
Handheld Pod Release Button
Power Cord with Wrap Strap
Extension Wand
Handheld Pod
Steam Trigger
Wall Mount Storage Clip Area
Extension Wand Release Pedal
Mop Pad Foot
Wall Mount
Tool Box

NOTE: Tool Box stores Black Bristle Brush, Angle Concentrator Tool, Grout Tool, and Flat Scraper Tool.

Detailed Specifications

The Bissell Powersteamer Steam Mop 2685 boasts the following key features:

Adjustable steam control with high, medium, and low settings
23-foot power cord for extended reach
Swivel steering for easy maneuverability
On-demand steam trigger for targeted cleaning
Large water tank capacity of 16.9 ounces
Built-in scrubber to tackle tough stains
LED lights for better visibility
Crevice tool and soft brush accessory for versatile cleaning
Steam ready in 30 seconds
Easy-empty water tank

Assembly

WARNING: Do not plug in your PowerSteamer® Heavy Duty Steam Mop until you are familiar with all instructions and operating procedures.

Attach the Extension Wand to the Mop Pad Foot by snapping it into place.
Then, insert the Handheld Pod to the Extension Wand until it clicks into place.
Attach the Tool Box to the Handheld Pod by aligning the clip on the back side of the Tool Box to the opening on the bottom of the Handheld Pod and slide down into place.
Wrap the cord around the palm of your hand into a circle. Then, place the wrap strap around the cord and back onto itself to secure.

Filling Your Water Tank

The Clean Water Tank is located on the top of the Handheld Pod.
Pull the water tank cap straight up to open.
Use Water Cup provided and fill with distilled or demineralized water (recommended in place of tap water). Close the water tank cap after filling.

A few notes about filling the Easy Fill Water Tank:

The tank’s capacity is 350 mL (12 oz).
Do not use chemicals in the Easy Fill Water Tank of your PowerSteamer® Heavy Duty Steam Mop. Other solutions may harm the machine and void the warranty.

NOTE: Use of distilled water or demineralized water is recommended to prolong the life of your steam mop. To add a fresh scent as you clean, try BISSELL® demineralized waters in various scents like Citrus, Eucalyptus Mint and Spring Breeze.

Attaching Microfiber Mop Pads

Your PowerSteamer® Heavy Duty Steam Mop comes with two Scrubby Mop Pads to clean sealed hard floor surfaces.
To attach mop pad, wrap pad around the bottom of the foot, making sure the gray stitching is located on the front of the foot and the quick grip release tab is located on the back.

Using SmartSet Steam Control

Plug machine into a properly grounded outlet.
When the unit is plugged in the STEAM READY light will start to blink.
After 30 seconds, the STEAM READY light will turn to a solid light. This means the steam mop is heated and ready to use.
Now, select a desired steam level based on your cleaning needs. Push the HI STEAM button once to turn ON. Use HI STEAM when cleaning durable surfaces, tough stains and stuck-on or sticky messes. Push the LOW STEAM button once to turn ON. Use LOW STEAM for cleaning more delicate surfaces and lighter, everyday messes.
To turn steam OFF, press the PAUSE button once.

NOTE: You must wait until the STEAM READY light is a solid color before selecting your desired steam level. Upon the first use of your steam mop or first use after refilling the Easy Fill Water Tank, the pump may make a “knocking” sound. This is normal and will diminish after a few seconds.

Cleaning Hard Floors

NOTE: Before you clean, thoroughly sweep or vacuum floor prior to cleaning with the PowerSteamer® Heavy Duty Steam Mop.
Your steam mop is designed to clean hard flooring such as ceramic tile, laminate, marble, stone, and sealed hardwood floors. Use of your steam mop on waxed some unwaxed floors may result in a diminished glossiness. The steam mop is for use on unsealed floors. For best results, test in an inconspicuous area and the care instructions from your flooring manufacturer.

Plug machine into a properly grounded outlet.
Make sure the STEAM READY light is solid before selecting the appropriate steam level based on your hard floor cleaning needs.
Step on the side of the foot to recline the body of the machine to begin cleaning.
NOTE: Your Steam Mop may have already come assembled with a mop pad on the foot. If not, refer to instructions on page 6 in the “Attaching Microfiber Mop Pads” section to learn how to attach the mop pad.
Push the Steam Trigger underneath the handle of the Handheld Pod to release steam.
To easily maneuver and clean tight spaces, take advantage of the swivel steering.
For best results to sanitize an area of your floor, use the microfiber mop pads and slowly and evenly move your steam mop back and forth at least three times over the area using continuous steam. Remove the pad after use and wash.
When finished cleaning, turn OFF the machine by pressing the PAUSE button and unplugging the unit.

bissell_powersteamer_steam_mop_2685-push_the_steam_trigger.png

Description

The Bissell Powersteamer Steam Mop 2685 is designed to provide a deep clean while being gentle on your floors. Its adjustable steam control allows you to customize the level of steam based on the cleaning task at hand. The swivel steering and on-demand steam trigger provide ease of use and precision, while the large water tank capacity ensures a longer cleaning time between refills. The built-in scrubber and included accessories make it possible to clean corners, crevices, and various surfaces with ease. The LED lights are perfect for illuminating dark areas, ensuring a thorough clean. The mop is lightweight, easy to assemble, and requires minimal maintenance, making it a convenient and efficient solution for your cleaning needs.

Setup Guide

To operate, assemble, and configure the Bissell Powersteamer Steam Mop 2685, follow these steps:

Fill the water tank with distilled or tap water.
Plug in the mop and allow it to heat up for 30 seconds.
Select the desired steam setting based on the cleaning task.
Press the on-demand steam trigger for targeted cleaning or leave it pressed for continuous steam.
Use the built-in scrubber and accessories to clean corners, crevices, and various surfaces.
After use, empty the water tank and wipe down the mop head for storage.

Troubleshooting

WARNING: To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

Common problems and solutions include:

Steam not coming out: Check if the water tank is filled and if the mop is properly plugged in.
Low steam output: Ensure the mop is heated up completely before use and try adjusting the steam setting.
Mop pulling to one side: Check for any debris or blockages in the wheels and ensure the mop is on a flat surface.
Water leaking from the mop: Make sure the water tank is properly secured and not overfilled.

Problem	Possible causes	Remedies
Reduced steam OR no steam	Easy Fill Water Tank empty .	Refill tank .
	Steam level not selected .	Select steamlevel by pushing steam level button .
	Wand not installed properly .	Push the wand all the way into the Handheld Pod untilyou hear a click .
	Foot not installed properly .	Insert the Extension Wand into foot until you hear a click .
	PAUSE buttonis pressed .	Once STEAM READY light is solid, select desired steam level (HI or LO) then push the trigger under the handleof the Handheld Pod to release steam.
Streaking	Dirty mop pad .	Remove and wash pad per instructions .
Streaking	Useon waxed or oiled floor.	If you have used floor polishes or wax on your floors, steam products may decrease glossiness . Refer to the wax or polish manufacturer . If you don’t wax or polish your floors, check the floorcare instructions from your flooring manufacturer .
Leaking	Moppad is too wet.	Remove andreplace with drymop pad and intermittently press the steam trigger for less steam .
	Steam level is too high .	Lower the steam level.
	Crack in unitor Easy Fill Water Tank .	Check to see if there areany cracks on the unit or tank and check to make sure the rubber gasket on the tank is still attached and seated properly in the unit .
Knocking noise	First use or Easy Fill Water Tank is empty .	Fill tank and knocking will diminish after a few seconds .
Knocking noise	Metal tube cannot reach water .	Shake the pod to let the tube reach the water level .

Pros & Cons

Pros

Adjustable steam control
Swivel steering and on-demand steam trigger
Large water tank capacity
Built-in scrubber and accessories for versatile cleaning
LED lights for better visibility

Cons

Higher price point compared to some competitors
Not suitable for unsealed floors or carpets

Warranty

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail or telephone as described below. It may be necessary to obtain some of your personal information, such as a mailing address, to fulfill terms of this warranty. Any personal data will be handled pursuant to BISSELL’s Privacy Policy, which can be found online at https://www.bissell.com/privacy-policy.html.

Limited Two-Year Warranty
Subject to the *Exceptions and Exclusions from the Terms of the Limited Warranty, upon receipt of the product BISSELL will repair or replace (with new, refurbished, lightly used, or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for two years, any defective or malfunctioning part.
See information below on "If your BISSELL product should require service”.

Customer Reviews

Customers have praised the Bissell Powersteamer Steam Mop 2685 for its powerful steam output, ease of use, and versatility. However, some have reported issues with water leaks and the higher price point compared to other steam mops on the market. Overall, the mop has received positive feedback for its ability to deep clean and sanitize various floor types.

Search Manuals in: mop-2685

Read More