Introduction

The NordicTrack Commercial 1750 Treadmill NTL14119.2 is a premium fitness machine designed for serious runners and home gym enthusiasts alike. Featuring a powerful 3.5 CHP motor, this treadmill offers a top speed of 12 MPH and an incline range from -3% to 12%, allowing for versatile workout options. The 14-inch HD touchscreen provides access to iFIT workouts, enabling users to experience interactive training sessions. Priced at approximately $1,799.00, it combines performance and convenience in a sleek design.

Parts List

KeyNo.	Qty.	Description	KeyNo.	Qty.	Description
1	4	5/16" x 3/4" Screw	51	1	Drive Roller/Pulley
2	8	5/16" x 2" Screw	52	1	Frame
3	5	5/16" x 1 3/4" Bolt	53	4	Tie
4	1	5/16" x 2 1/4" Bolt	54	1	Drive Motor
5	34	#8 x 3/4" Screw	55	1	Motor Belt
6	2	#10 x 3/4" Screw	56	1	Storage Latch
7	1	#8 x 1/2" GroundScrew	57	1	Right Frame Cover
8	10	5/16" Star Washer	58	4	Cushion Plate
9	6	5/16" Nut	59	1	Idler Roller
10	20	#8 x 3/4" Tek Screw	60	1	Left Rear Cap
11	30	#8 x 1/2" Screw	61	1	Right RearCap
12	3	1/4" x 2 1/2" Screw	62	1	Motor Hood
13	10	#8 x 1/2" WasherHead Screw	63	2	Incline Frame Spacer
14	1	3/8" x 1 1/2" Bolt	64	2	Frame Spacer
15	1	3/8" x 1 3/4" Bolt	65	1	Incline Frame
16	2	5/16" x 1 1/4" Screw	66	1	Incline Motor
17	14	Small Washer	67	2	Incline Motor Spacer
18	4	#8 Belt Guide Screw	68	2	Hood Mount
19	2	5/16" MotorBolt	69	1	Power Cord
20	4	3/8" x 1 1/4" Screw	70	1	Power Cord Grommet
21	4	1/4" x 1 1/4" Screw	71	1	Power Switch
22	2	3/8" x 1 3/8" Bolt	72	1	Belly Pan
23	4	3/8" x 2 3/4" Screw	73	1	Left Handrail Top Cover
24	29	#8 x 3/4" TrussHead Screw	74	2	Handrail
25	8	3/8" StarWasher	75	1	Left Handrail Bottom Cover
26	2	1/2" x 2 5/8" Bolt	76	1	Upright Crossbar
27	2	1/4" x 1/2" Screw	77	2	Console FrameCap
28	2	3/8" x 1" Screw	78	4	Rubber Cushion
29	8	#6 x 3/8" Screw	79	1	Tray
30	3	1/4" Nut	80	1	Pulse Crossbar
31	4	5/16" Flat Washer	81	1	Right Handrail Top Cover
32	3	Console GroundWire	82	1	Right Handrail Bottom Cover
33	4	1/4" x 3/4" Screw	83	1	Upright Wire
34	2	1/2" Nut	84	1	Right Upright
35	6	3/8" Nut	85	2	Caution Decal
36	5	Hood Clip	86	2	Upright Grommet
37	4	Cushion	87	4	Cushion Spring
38	1	Warning Decal	88	1	Incline Stop Bracket
39	1	Walking Platform	89	1	Left BaseCover
40	1	Walking Belt	90	1	Right Base Cover
41	1	Left FootRail	91	1	Left Upright
42	1	Right FootRail	92	2	Rear Wheel
43	2	Belt Guide	93	1	Base
44	1	Left FrameCover	94	1	Left Tray
45	4	3/8" Plastic Bushing	95	2	Fan
46	2	1/2" Plastic Bushing	96	1	Console
47	2	1/2" ThrustWasher	97	2	Rear Foot
48	1	Controller	98	1	Rubber Spacer
49	2	#8 Star Washer	99	2	Speaker
50	1	Controller Bracket	100	1	Console Base

101	1	Right Tray	113	1	Handle Cap
102	1	Hood Accent	114	1	1/4" x 5/8" Screw
103	1	Hood Grill	115	1	Adjustment Handle
104	1	Key/Clip	116	2	Cushion Bushing
105	2	Console FrameCap	117	2	Cushion RodBracket
106	1	Console Frame	118	2	Cushion WheelStop
107	2	Cable Tie	119	2	M10 Spring Washer
108	2	1/4" x 1 1/2" Bolt	120	2	Cushion Wheel
109	1	Latch Crossbar	121	2	3/8" Flat Washer
110	1	Cushion Rod	122	14	#8 x 3/4" WasherHead Screw
111	2	3/8" ThrustWasher	*	–	User’s Manual
112	4	Base Pad

EXPLODED DRAWING A

EXPLODED DRAWING B

EXPLODED DRAWING C

EXPLODED DRAWING D

BEFORE YOU BEGIN

Thank you for selecting the revolutionary NORDICTRACK COMMERCIAL 1750 treadmill. The COMMERCIAL 1750 treadmill offers an impres-sive selection of features designed to make your workouts at home more effective and enjoyable. And when you’re not exercising, the unique treadmill can be folded up, requiring less than half the floor space of other treadmills.

For your benefit, read this manual carefully before using the treadmill. If you have questions after reading this manual, please see the front cover of this manual. To help us assist you, please note the product model number and serial number before contacting us. The model number and the location of the serial num-ber decal are shown on the front cover of this manual.

before_you_begin_nordictrack_commercial_1750_treadmill_ntl14119.2.png

Before reading further, please review the drawing below and familiarize yourself with the labeled parts.

PART IDENTIFICATION CHART

Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw-ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.

Note: If a part is not in the hardware kit, check to see whether it is preattached. Extra parts may be included.

part_identification_chart_nordictrack_commercial_1750_treadmill_ntl14119.2.png

ASSEMBLY

Assembly requires two persons.
Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you ﬁ nish all assembly steps.
After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner.
To identify small parts, see page 7.
Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.”
Assembly requires the following tools:

To avoid damaging parts, do not use power tools.

Go to https://my.nordictrack.com on your computer and register your product.
- documents your ownership
- activates your warranty
- ensures priority customer support if assistance is ever needed
  Note: If you do not have internet access, call Customer Care (see the front cover of this manual) and register your product.
Make sure that the power cord is unplugged.
Remove the tie securing the Upright Wire (83) to the front of the Base (93).
Next, identify the Right Upright (84). Have a second person hold the Right Upright near the Base (93) the inset drawing. Tie the wire tie (A) in the Right Upright (84) securely around the end of the Upright Wire (83). Then, insert the Upright Wire into the lower end of the Right Upright as you pull the other end of the wire tie through the Right Upright.
Lay the Right Upright (84) near the Base (93).
Press the Upright Grommet (86) into the square hole (B) in the Right Upright. Make sure not to pinch the ground wire (C).
If there is a screw (D) preattached to the Right Upright (84), remove and discard it.
Then, attach the ground wire (C) to the Right Upright (84) with a #8 x 1/2" Ground Screw (7).
Hold the Right Upright (84) against the Base (93). Make sure not to pinch the Upright Wire (83).
Attach the Right Upright (84) with two 3/8" x 2 3/4" Screws (23), two 3/8" x 1 1/4" Screws (20), and four 3/8" Star Washers (25) as shown; do not fully tighten the Screws yet.
Attach the Left Upright (not shown) in the same way.
Note: There are no wires on the left side.
Identify the Left and Right Base Covers (89, 90).
Slide the Left Base Cover (89) onto the Left Upright (91), and slide the Right Base Cover (90) onto the Right Upright (84). Press the Base Covers downward, but do not snap the Base Covers into place yet.
If there is a film (E) covering the decal on each Upright (84, 91), carefully remove the film.
Carefully slide the Upright Crossbar (76) between the Right and Left Uprights (84, 91). Attach the Upright Crossbar with four 5/16" x 3/4" Screws (1); start all four Screws, and then tighten them.
Attach the Tray (79) to the Upright Crossbar (76) with four #8 x 3/4" Truss Head Screws (24); start all four Truss Head Screws, and then tighten them.
Attach the two Handrails (74) to the Right and Left Uprights (84, 91) with two 5/16" x 2" Screws (2) and two 5/16" Star Washers (8); do not fully tighten the Screws yet. Be care-ful not to pinch the Upright Wire (83) on the right side. Position the Upright Wire in the notch (F) as shown.
Then, remove and discard the two indicated screws (G).
Set the console assembly (H) face down on a soft surface to avoid scratching the console assembly.
Remove and discard the four indicated screws (I). Then, remove the Pulse Crossbar (80).
Next, identify the Left and Right Trays (94, 101). Attach the Trays to the console assembly (H) with eight #8 x 1/2" Screws (11). Do not over-tighten the Screws.
IMPORTANT: To avoid damaging the Pulse Crossbar (80), do not use power tools, and do not overtighten the #10 x 3/4" Screws (6) or the 5/16" x 2" Screws (2).
Orient the Pulse Crossbar (80) as shown. Attach the Pulse Crossbar with two 5/16" x 2" Screws (2), two 5/16" Star Washers (8), and two #10 x 3/4" Screws (6); start all four Screws, and then tighten them.
Then, tighten the other two 5/16" x 2" Screws (2).
With the help of a second person, hold the con- sole assembly (H) near the Handrails (74).
See the inset drawing. Connect the Upright Wire (83) to the console wire (J). The connec-tors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER.
Then, remove any wire ties (K) from the Upright Wire (83).
Attach the console assembly (H) to the Handrails (74) with four 5/16" x 2" Screws (2) and four 5/16" Star Washers (8); start all four Screws, and then tighten them. Be careful not to pinch the wires (J).
Insert the wires (J) into the top of the Right Upright (84).
Start eight #8 x 3/4" Truss Head Screws (24) into the Pulse Crossbar (80), and then tighten them; do not overtighten the Truss Head Screws.
Set the Left Handrail Top Cover (73) on the left Handrail (74). Start four #8 x 3/4" Truss Head Screws (24) into the Left Handrail Bottom Cover (75), the left Handrail, and the Left Handrail Top Cover. Next, slide the Left Handrail Top and Bottom Covers forward against the console assembly (H) as shown. Tighten the two middle Truss Head Screws first. Then, tighten the other two Truss Head Screws
Attach the Right Handrail Top and Bottom Covers (81, 82) to the right Handrail (74) as described above.
Raise the Frame (52) to the upright position. Have a second person hold the Frame until step 17 is completed.
Remove the two 5/16" x 1 1/4" Screws (16) from the Latch Crossbar (109).
Orient the Latch Crossbar (109) as shown. Make sure that the “This side toward belt” sticker (L) is facing the treadmill.
Attach the Latch Crossbar (109) to the brackets (M) on the Frame (52) with the two 5/16" x 1 1/4" Screws (16) and two 5/16" Star Washers (8).
Remove the 5/16" Nut (9) and the 5/16" x 1 3/4" Bolt (3) from the bracket on the Base (93).
Next, orient the Storage Latch (56) as shown.
Attach the lower end of the Storage Latch (56) to the bracket on the Base (93) with the 5/16" x 1 3/4" Bolt (3) and the 5/16" Nut (9).
Then, raise the Storage Latch (56) to a vertical position and remove the tie (N).
Remove the 5/16" Nut (9) and the 5/16" x 2 1/4" Bolt (4) from the bracket on the Frame (52).
Align the upper end of the Storage Latch (56) with the bracket on the Frame (52), and insert a 5/16" x 2 1/4" Bolt (4) through the bracket and the Storage Latch. This will push a spacer (O) out of the Storage Latch; discard the spacer.
Next, tighten the 5/16" Nut (9) onto the 5/16" x 2 1/4" Bolt (4). Do not overtighten the Nut; the Storage Latch (56) must be able to pivot.
Then, lower the Frame (52) (see HOW TO LOWER THE TREADMILL FOR USE on page 29).
Firmly tighten the four 3/8" x 2 3/4" Screws (23) and the four 3/8" x 1 1/4" Screws (20).
Then, slide the Left and Right Base Covers (89, 90) downward until they snap into place.
Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the ﬂ oor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 31 and 32). Note: Extra parts may be included.

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL
To avoid damaging the treadmill, adjust the incline to zero before you fold the treadmill. Then, remove the key and unplug the power cord.

CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

Hold the metal frame (A) ﬁ rmly in the location shown by the arrow below.
CAUTION: Do not hold the frame by the plastic foot rails. Bend your legs and keep your back straight.
Raise the frame (A) until the storage latch (B) locks in the storage position.
CAUTION: Make sure that the storage latch locks.
To protect the ﬂ oor or carpet, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85°F (30°C).

HOW TO MOVE THE TREADMILL
Before moving the treadmill, fold it as described at the left.

CAUTION: Make sure that the storage latch is in the locked position. Moving the treadmill may require two people.

Hold the frame (A) and one of the handrails (C), and place one foot against a wheel (D).
Pull back on the handrail until the treadmill will roll on the wheels, and carefully move it to the desired location.
CAUTION: Do not move the tread-mill without tipping it back, do not pull on the frame, and do not move the treadmill over an uneven surface.
Place one foot against a wheel, and carefully lower the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

Push the upper end of the frame forward, and gently press the upper part of the storage latch with your foot at the same time.
While pressing the stor-age latch with your foot, pull the upper end of the frame toward yourself.
Step back and let the frame lower to the floor.

Specifications

Motor: 3.5 HP DurX Commercial-Plus Motor
Running Surface: 22" x 60" commercial-grade tread belt
Incline/Decline: -3% to 15% incline, -3% decline
Speed: 0-12 MPH
Programs: 50 pre-set workout programs
Heart Rate Monitoring: EKG grip pulse and Bluetooth chest strap compatible
Display: 10" HD Smart Touchscreen
Connectivity: Wi-Fi, Bluetooth, and iFit compatibility
Additional Features: Cooling fans, sound system, tablet holder

Description

The NordicTrack Commercial 1750 Treadmill NTL14119.2 boasts a robust and sturdy design, making it suitable for heavy use. The 10" HD Smart Touchscreen provides an intuitive interface for navigating through various workout programs and tracking your progress. The treadmill also features a spacious 22" x 60" running surface, ensuring comfortable strides for users of all sizes. With its advanced incline and decline capabilities, you can simulate a variety of real-world running conditions, adding variety to your workouts.

The integration with iFit allows for endless workout options, including virtual runs in exotic locations and personalized training sessions. The cooling fans and sound system enhance the overall workout experience, making your sessions more enjoyable and engaging.

Setup Guide

To assemble the NordicTrack Commercial 1750 Treadmill,

Follow the instructions provided in the user manual.
The process typically involves attaching the console, side rails, and other components. Ensure all parts are securely fastened to avoid any safety issues.
Once assembled, configure the treadmill by connecting it to your Wi-Fi network and setting up your iFit account if you plan to use the app.
Pair any Bluetooth devices such as heart rate monitors or headphones for a seamless workout experience.

MAINTENANCE

Regular maintenance is important for optimal perfor-mance and to reduce wear.
Inspect and properly tighten all parts each time the treadmill is used. Replace any worn parts immediately.
Regularly clean the treadmill and keep the walking belt clean and dry. First, press the power switch into the off position and unplug the power cord.
Wipe exterior parts of the treadmill with a damp cloth and a small amount of mild soap.
IMPORTANT: Do not spray liquids directly onto the treadmill. To avoid damage to the console, keep liquids away from the console.
Then, thoroughly dry the treadmill with a soft towel.

Troubleshooting

Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assis-tance is needed, see the front cover of this manual.

SYMPTOM: The power does not turn on

a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 17). Use only a surge suppressor that meets all of the specifi cations described on page 17.
IMPORTANT: If the treadmill is connected to an AFCI-equipped outlet and your circuit breaker trips repeatedly when the treadmill is used, see the front cover of this manual to purchase an arc fi lter.
b. After the power cord has been plugged in, make sure that the key is inserted into the console.
c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes as shown, the switch has tripped. To reset the power switch, wait for fi ve minutes and then press the switch back in.

SYMPTOM: The power turns off during use

a. Check the power switch (see the drawing above). If the switch has tripped, wait for fi ve minutes and then press the switch back in.
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for fi ve minutes, and then plug it back in.
c. Remove the key from the console, and then reinsert it.
d. If the treadmill still will not run, please see the front cover of this manual.

SYMPTOM: The incline of the treadmill does not change correctly

a. Calibrate the incline system (see step 4 on page 26).

SYMPTOM: The treadmill will not connect to the wireless network

a. Make sure that the wireless settings on the console are correct (see page 27).
b. Make sure that the settings for your wireless network are correct.
c. If you still have questions, see the front cover of this manual.

SYMPTOM: The walking belt slows when walked on

a. Use only a surge suppressor that meets all of the specifi cations described on page 17.
b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws (A) counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
c. Your treadmill features a walking belt coated with high-performance lubricant.
IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless instructed to do so by an authorized service representative. Such substances may deteriorate the walking belt and cause excessive wear. If you suspect that the walking belt needs more lubricant, see the front cover of this manual.
d. If the walking belt still slows when walked on, see the front cover of this manual.

SYMPTOM: The walking belt is off-center or slips when walked on

a. If the walking belt is off-center, fi rst remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is centered.
b. If the walking belt slips when walked on, fi rst remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

SYMPTOM: The displays of the console do not function properly

a. If the console does not boot up properly, or if the console freezes and does not respond, reset the console to the factory default settings. IMPORTANT: Doing this will erase all the custom settings you have made to the console. Resetting the console requires two people. First, press the power switch into the off position. Next, locate the small reset opening (B) on the back edge of the console. Using a bent paper clip (C), press and hold the reset button inside the opening, and have a second person press the power switch into the on position. Continue holding the reset button until the console turns on. When the reset operation is complete, the console will turn off and then turn back on. If it does not, use the power switch to turn the treadmill off and then on again. Once the console turns on, check for ﬁ rmware updates (see HOW TO USE THE MAINTENANCE SECTION on page 26).
Note: It may take a few minutes for the console to be ready for use.

IMPORTANT

Doing this will erase all the custom settings you have made to the console. Resetting the console requires two people.
First, press the power switch into the off position. Next, locate the small reset opening (B) on the back edge of the console.
Using a bent paper clip (C), press and hold the reset button inside the opening, and have a second person press the power switch into the on position.
Continue holding the reset button until the console turns on. When the reset operation is complete, the console will turn off and then turn back on. If it does not, use the power switch to turn the treadmill off and then on again.
Once the console turns on, check for fi rmware updates.

Note: It may take a few minutes for the console to be ready for use.

NordicTrack Commercial 1750 Treadmill Pros & Cons

Pros

Robust and durable construction suitable for heavy use
Advanced incline and decline capabilities for varied workouts
Large HD touchscreen display for easy navigation
Integration with iFit for endless workout options
Comfort features like cooling fans and sound system
Heart rate monitoring and Bluetooth connectivity

Cons

High price point compared to other treadmills on the market
Large footprint requires significant space in your home or gym
Assembly can be complex and time-consuming
Some users may find the iFit subscription costs additional

Customer Reviews

Customers have praised the NordicTrack Commercial 1750 Treadmill for its durability and extensive feature set. Many appreciate the variety of workout programs and the ease of use of the touchscreen interface. However, some users have noted that the assembly process can be challenging and that the treadmill's size requires significant space.

Common complaints

Occasional electronic glitches and the need for periodic belt adjustments. Despite these minor issues, the overall satisfaction with this product remains high among fitness enthusiasts.

WARRANTY

ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The frame and the drive motor are warranted for the lifetime of the original purchaser (customer). Parts are warranted for fi ve (5) years from the date of purchase. Labor is warranted for two (2) years from the date of purchase.

Search Manuals in: ntl141192

Read More