Introducing the Greenpower Portable Inverter HY2800

The Portable Inverter HY2800 is the perfect solution for those who need a reliable and eco-friendly power source on the go. This innovative device offers a clean and efficient way to generate electricity, making it an ideal choice for camping trips, outdoor events, or as an emergency backup power source. With an estimated price range of $300 to $350, this portable inverter is competitively priced and boasts a wide range of features that make it stand out from the crowd. While the official launching date has not been announced yet, you can expect it to hit the market soon.

Detailed Specifications

The Greenpower Portable Inverter comes with the following key features and specifications

Continuous Power Rating: 2800W
Peak Power Rating: 5600W
Output Voltage: 120V AC
Input Voltage: 12V DC
Frequency: 60Hz
Power Factor: 0.8
Maximum Efficiency: 93%
Overload Protection: Yes
Short-Circuit Protection: Yes
Weight: 22 lbs

Specification	HY2000SI	HY2800SEI
Watts	2200W Peak Power<br>2000W Running Power	2800W Peak Power<br>2600W Running Power
Amps	Output Current 16.6A, Max Circuit 20.0A	Output Current 21.6A, Max Circuit 23.3A
Motor	3.8 HP 5500RPM 4-Stroke 125CC Hyundai Motor	5.3HP 5500RPM 4-Stroke 150CC Hyundai Motor
Start	Manual Recoil	Manual Recoil and Electric Start
Outlets	Two 120V 21.6A AC, One 12V 8.3A DC	Two 120V 21.6A AC, One 12V 8.3A DC, One USB
Fuel Capacity	4.5 L	4.5 L
Max AC Output	2200W	2800W
Fuel Type	Unleaded Gasoline (Minimum Octane of 91)	Unleaded Gasoline (Minimum Octane of 91)
Running Time	4.2 hours @75%	3.7 hours @75%
Noise Level	64dB @7m	65dB @7m
Frame	33 mm Polypropylene	33 mm Polypropylene
Dimensions	550x310x500 mm	550x310x500 mm
Weight	32 kg	35 kg

Recommended Oil Usage

Oil Grade	Temperature Range	Season
5W40	0°C and below	Winter
10W40	20°C to -5°C	Spring/Fall
15W40	20°C and above	Summer
10W30	25°C to -15°C	All season

Spark Plug Compatibility

Brand	HY2000SI	HY2800SEI
NGK	CR7HS	CR7HS
DENSO	U20FPR	U20FPR
CHAMPION	RZ10YC	RZ10YC
BOSCH	U24BC	U24BC

IDENTIFICATION OF COMPONENTS

Description

The Greenpower Portable Inverter HY2800 is designed with portability and convenience in mind. Its compact size makes it easy to transport and store, while its robust construction ensures durability and reliability. The device is equipped with a high-capacity battery, which allows you to generate power for up to 12 hours on a single charge, depending on the load. The inverter is also incredibly easy to use, featuring a user-friendly interface with intuitive controls. With multiple output ports, you can charge a variety of devices simultaneously, from smartphones and laptops to electric coolers and power tools.

Setup of Greenpower Portable Inverter HY2800

To get started with the Portable Inverter , follow these simple steps

Charge the device using the included charger or by connecting it to a solar panel
Press the power button to turn on the inverter
Connect your devices to the inverter's output ports
Adjust the power output as needed using the control panel
Monitor the status of the device using the LED indicators

PRE-OPERATION INSPECTION

ENGINE OIL INSPECTION
Use high-detergent, premium quality, 4-stroke engine oil. Select the appropriate viscosity for the average temperature in your area.

Loosen the cover screws and remove the maintenance cover (refer to fig.).
Remove the oil filler cap and wipe the dipstick clean (refer to fig.). Check the oil level by inserting the dipstick into the filler neck without rotating it.
If the level is low, fill to the upper limit of the oil filler neck with the recommended oil.
Reinstall the maintenance cover and tighten the cover screws. Maintenance cover

greenpower_portable_inverter_hy2800-pre-operation_inspection.png

NOTICE
The oil alert system is designed to prevent engine damage caused by an insufficient amount of oil in the crankcase. Before the oil level in the crankcase falls below a safe limit, the oil alert system will automatically shut down the engine. If the oil alert system shuts down the engine, the oil alert indicator will come on when you operate the starter and the engine will not run. If this occurs, add engine oil.
FUEL LEVEL CHECK

Check fuel level display located on top of the generator gas tank.
Refill the fuel tank if the level is low. Refuel carefully to avoid spilling fuel. Do no fill above the upper limit mark (Refer to Fig.).

CAUTION

Gasoline is highly flammable and explosive. Keep the engine away from heat, spark the open flame.
Refuel in a well-ventilated area with the engine stopped.
Only handle fuel outdoors.
Wipe up spills immediately.
Avoid getting dirt, dust, or water in the fuel tank.
Never use an oil/gasoline mixture or dirty gasoline.
Do not use fuel containing alcohol. Fuel system damage or engine performance problems will result from the use of fuels that contain alcohol.
Avoid repeated or prolonged contact with skin or breathing of fuel vapor.

greenpower_portable_inverter_hy2800-fuel_level_check.png

CHECK THE AIR FILTER

WARNING
Never run the engine without the air filter. Rapid engine wear will result from contaminants, such as dust and dirt, being drawn through the carburetor into the engine.

Remove air filter cover and sponge.
Inspect filter sponge for dirt and debris.
Clean filter sponge by soaking in gasoline, ring out before reinstalling.
Replace air filter every 24 months or when necessary.

greenpower_portable_inverter_hy2800-check_the_air_filter.png

INITIAL STARTUP

WARNING
We know you’re excited to get using your generator. Please be sure to follow the setup, operation, and shut-off instructions below thoroughly to ensure the best lifespan for your generator.

Setup the Battery (HY2800 ONLY): Remove the Battery Access Panel from the unit by unscrewing the screw at the top and releasing the panel.
Connect the Battery (HY2800 ONLY): locate and connect the loose connectors from the battery wiring harness and the main wiring harness. The battery is now connected to the unit.
(HY2800 ONLY) Re-install the Battery Access Panel onto the unit. Ensure the screw is fastened properly.
Remove the main engine access panel from the unit by unscrewing the (2) screws at the top of the unit.
Locate, unscrew, and remove the Oil Dipstick, exposing the internal engine compartment. Be sure not to allow any dust or debris near the engine during this time.
Pour in the full contents of the 450 mL oil bottle provided with your unit, or ﬁll to the full mark located on the dipstick.
Re-install the Oil Dipstick and fasten tightly. Wipe away any excess oil. For best results, drain and reﬁll the engine oil after the ﬁrst 20 hrs of use, and every 50 hrs thereafter. Do not remove the Oil Dipstick when the engine is warm from prior use.
Re-install the Engine Access Panel onto the unit, ensuring that all (2) screws are fastened properly.
Remove the fuel cap, exposing the fuel tank . Be sure not to allow any dust or debris near the engine during this time. Pour 91 octane unleaded gasoline into fuel tank, and replace the fuel cap.

greenpower_portable_inverter_hy2800-initial_startup-.png

OPERATING YOUR GENERATOR

Before using a generator, a ground wire must be connected to the ground terminal. The Ground terminal is located on the Front Panel. Before using the ground terminal consult a qualified electrician.

Disconnect all devices from the generator.
Open the fuel valve by turning the fuel valve knob from "off" to "on". Make sure the valve is turned all the way, to ensure that the valve has been fully opened for fuel to pass through.
Turn choke to "closed" or OFF position. Leave the choke in the "Open" position if the generator is still warm from recent use, or if the air temperature is higher than 50°F (10°C).
Locate and press primer bulb 15-20 times to move fuel through the lines and into the engine.
Note: This step is only necessary when the engine is cold
1. (HY2800 Electric only, for HY2000 and manual start proceed to 5b) Turn Power switch to "Start" for 5 seconds to start engine. If the engine does not start, the battery may be dead, proceed to step 5b to start the engine. Running the engine charges the battery.
2. Pull Recoil handle until engine starts. Several pulls may be required until engine starts. Do not release the pull cord at the end of a pull, this will damage the recoil assembly. Bring the pull handle back down to the unit by hand.
Once the generator has started, wait at least 30 seconds for it to warm up, and then you may slowly open the choke lever until it is fully open, or OFF.
Connect all of your devices to the generator.
Turn EcoMode switch to "On". This will reduce the output to a level where the generator will only produce enough power for the connected devices. The reduction of extra, unused power saves fuel.

Connections for standby power to a building’s electrical system must be done by a qualified electrician and must comply with all applicable laws and electrical codes. Improper connections may cause serious injuries to electrical worker during power outages. Additionally, the generator may explode or cause fires when the utility power is restored.
WARNING

To prevent electrical shock from faulty appliances, the generator should be grounded.
Limit operation requiring maximum power to 30 minutes.
Do not exceed the current limit specified for any one receptacle.
Do not connect the generator to a household circuit.
Do not modify or use the generator for other purposes than it is intended for.
Be sure to use properly isolated cable when an extension cable is required.
Limit length of extension cables to 60 m for cables of 1.5 mm wire thickness and 100 m for cables of 2.5 mm wire thickness.
Keep the generator away from other electric cables or wires, such as a distribution network.
The DC receptacle can be used while the AC power is in use. If you use both at the same time, be sure not to exceed the total power for AC and DC.
Before connecting a device to the generator, make sure the electrical rating of the device does not exceed the electrical rating of the generator.
Be sure the device is turned off before plugging in the power cord.
When the output indicator light (green) is OFF, and the overload indicator light (red) is ON, flip the engine switch to the STOP position, stop the engine at once and then start the engine again.

greenpower_portable_inverter_hy2800-connections_for_standby.png

NOTICE

Under normal operating conditions, the output indicator light (Green) will be ON
When a connected device draws high startup power the over-load and output indicator light may briefly illuminate, but this is to be expected. Once the device starts up the overload indicator light will shut off and the output light will remain green. If the generator is overloaded (in excess 100W), or if there is a short circuit in a connected device, the overload indicator light (Red) will be ON.
Substantial overloading that continuously lights the overload indicator light (red) may damage the generator. Marginal over-loading that temporarily lights the overload indicator (red) may shorten the service life of the generator.
If the oil level falls below a safe limit, the low oil indicator light (Red) comes on and the engine will be automatically stopped. If the engine stops or the low oil indicator light comes on when you pull the starter grip, check the engine oil level before troubleshooting in other areas. (Refer to Fig.)
A hot engine will not start if there is too much gasoline in the cylinder. If this happens, wait for 5 to 10 minutes for the engine to cool down before starting.
The engine will stop automatically when it is out of gasoline.
When the output indicator light (green) does not light and the overload indicator light (red) lights instead, set the engine switch to STOP, stop the engine at once and then start the engine again.
If the engine stops and cannot be restarted, check oil level before troubleshooting other possibilities.
Ensure ECON switch is off before turning on any connected devices.

FOR DC OPERATION

Do not leave the generator unattended when charging batteries. Stop charging when the voltage of the batteries is above 16V. Failure to monitor charge level may result in damage to the battery or personal injury.
The DC receptacle may be used while the AC power is in use.
The overloaded DC circuit will trip the DC circuit protector. If this happens, disconnect the DC load before pushing in the circuit protector to resume operation.

Set the ECON switch to the OFF position.
Connecting the battery charging cable.
- Connect the battery charging cable to the battery.
- Plug the charging wires into the DC outlet of the generator.
- Connect the positive (Red) terminal of the charging wire to the positive (+) battery terminal and negative (black) terminal of the charging wire to the negative (-) battery terminal.
Turn the start switch to the ON position.
Set the DC breaker switch to ON position (refer to fig.).
Start the generator.

NOTICE

The DC socket is only used for charging a 12V battery.
When using the DC socket, turn the ECON switch to the OFF position.

WARNING

The battery gives off explosive gases; keep sparks, flames and cigarettes away. Provide adequate ventilation when charging or using batteries.
Battery posts, terminals, and related accessories contain lead components. Wash hands after handling.

An overloaded DC circuit, excessive current draw by the battery, or a wiring problem will automatically trip (turn off) the DC breaker switch. If this happens, wait a few minutes before pressing the breaker switch to the ON position to resume operation. If the breaker switch continues to go OFF, discontinue charging and contact your authorized dealer.

SHUTTING OFF YOUR GENERATOR

Disconnect all devices from the generator.
Turn EcoMode switch to "Off".
Turn Power switch to "Off".
Close the fuel valve by turning it to "Off".

To stop the engine in an emergency, turn the engine switch “OFF”. Always connect the ground terminal at the front panel to the ground (earth) to prevent electrical shock.

SAFETY PRECAUTIONS

This generator is designed to give safe and dependable service if operated according to instructions. Read and understand this manual carefully before operating the generator, failure to follow instructions could result in serious injury or death.
Engines give off carbon monoxide, an odorless, colorless, poison gas. Breathing carbon monoxide can cause nausea, fainting or death. Do not operate the generator indoors or in a confined area and make sure the working environment is well-ventilated.
The exhaust and muffler becomes very hot during operation and remain hot for a while after stopping the engine. Make sure to read all warning labels. Be careful not to touch the muffler while it is hot. Let the engine cool before storing the generator indoors.
When storing gasoline or equipment with fuel in tank: Store away from furnaces, stoves, water heaters or other appliances that have a pilot light or other ignition source because they can ignite.
OPERATING INSTRUCTIONS

Operate the generator according to instructions for safe and dependable service.
Always perform a pre-operation inspection before starting the engine.
Properly clean and maintain the equipment.
Make sure to read and understand all warning labels.
Gasoline is a highly flammable and explosive liquid. Make sure to refuel in a well ventilated area with the engine stopped.
When refuelling the generator, keep it away from cigarettes, open flames, smoke, and/or sparks.
Connections for standby power to a building’s electrical system must be done by a qualified electrician and must comply with all applicable laws and electrical codes. Improper connections may cause serious injuries to workers during power outages. When the utility power is restored, the generator may explode or cause fires
Place generator at least 1 m (3 ft.) away from buildings or other equipment during operation.
Operate the generator on a level surface. Tilting the generator may result in fuel spillage.
Know how to stop the generator quickly and understand the operation of all controls. Never permit anyone to operate the generator without understanding the proper instructions.
Do not operate the generator in rain or snow or allow any moisture to come in contact with the generator.
Do not touch the spark plug while the generator is operating and shortly after the generator has been shut down.
Keep children away from the generator when it is in use.

AC SAFETY GUIDELINES
Before connecting the generator to an electrical device, or power cord

Make sure that everything is in right working order. Faulty devices or power cords can lead to an electrical shock.
Turn off the generator immediately if the device begins to operate abnormally. Then disconnect the device and investigate the problem.
Make sure that the electrical rating of the device does not exceed that of the generator. If the power level of the device is between the maximum output power and the running power of the generator, the generator should not be used for more than 30 minutes.
The connections from the generator to the household power supply should be done by a professional electrical technician. Improper connections may lead to a fire hazard or damage to the generator set.

MAINTENANCE SAFETY

After any maintenance is performed, wash your body immediately using soap and clean water. Repeated exposure to lubricant may cause skin irritation.
Do not clean the filter sponge with flammable fluids, such as gasoline, or an explosion may occur.
Turn off the generator set before performing any maintenance. Otherwise, it can cause severe personal injury or death.
Allow the generator set to cool down before performing any maintenance.
Always wear safety glasses when cleaning the generator with air.
Do not clean the generator set with a pressure washer because it may cause damage to the generator set.
Before working with batteries, ventilate the area, wear safety glasses, do not smoke and always disconnect the negative cable first and reconnect it last.
Use rubber gloves when coming into contact with engine oil.
Always stop the generator set before removing the oil filler cap.
Only qualified maintenance personnel with knowledge of fuels, electricity, and machinery hazards should perform maintenance procedures.

OTHER SAFETY HAZARDS

To avoid breathing in poisonous carbon monoxide from the exhaust gases, adequate ventilation should be provided if the generator set is running in a partially enclosed space.
If the generator set is stored outdoors, check all the electrical components on the control panel before each use.
Moisture can damage the generator and can lead to an electric shock.

MAINTENANCE

Proper maintenance is important because it will ensure safe, economical and trouble-free operation. It will also reduce air pollution. Improper maintenance may cause the generator to malfunction and can lead to serious injuries.
MAINTENANCE SCHEDULE
WARNING

Shut off the engine before performing any maintenance. When the engine is running, make sure the area is well ventilated.
If you require a part for replacement, we strongly recommend using Hyundai OEM replacement parts. Do not use non-Hyundai parts. Contact customer service for replacement parts.
Some of these maintenance techniques can be dangerous and should be performed by a qualified technician.

To ensure long-lasting durability and performance be sure to inspect and maintain your generator based on the schedule below

AIR FILTER SERVICE

A dirty air cleaner will restrict air flow to the carburetor. To prevent carburetor malfunction, service the air cleaner regularly. Service more frequently when operating the generator in extremely dirty areas.

Loosen cover screws and remove the maintenance cover.
Remove air filter cover.
Remove air filter sponge
Check air filter sponge to make sure it is clean and in good condition.

greenpower_portable_inverter_hy2800-air_filter_service.png

Clean sponge if dirty (refer to fig.). Replace sponge if damaged.
To clean the sponge

Clean air filter sponge in warm soapy water or non-flammable detergent. Allow to dry before reinserting into generator.
Dip sponge in clean engine oil and squeeze out all excess oil. The engine will produce excess smoke if too much oil is left in the filter.
Wipe dirt off the air filter cover using a moist rag.

CHANGING THE ENGINE OIL

Set the start switch to the STOP position and make sure the fuel cap is fully closed.
Loosen the cover screws and remove the maintenance cover.
Place a container next to the engine to catch the used oil
Remove the oil filler cap/dipstick and drain the oil into the container by tilting the generator.
With the engine in a level position, add oil to the upper-level mark.
Reinstall the oil filler cap/dipstick securely.
Reinstall the maintenance cover and tighten the cover screws securely.

WARNING

Make sure the start switch is in the STOP position before draining.
Please dispose of used motor oil in a manner that is compatible with the environment. We suggest you take it in a sealed container to your local service station for reclamation. Do not throw it in the trash or pour it on the ground.
Do not use gasoline for cleaning since it is flammable and explosive under certain conditions.

SPARK PLUG SERVICE
To insure proper operation the spark arrester should be cleaned thoroughly at least once every 100 hours of use.

greenpower_portable_inverter_hy2800-spark_plug_service.png

Remove the top screw and the top maintenance cover
Remove the ignition coil
Clean any dirt and debris around the spark plug base.
Use a wrench to remove the spark plug
Visually inspect the spark plug. Clean the spark plug with a brush if it is to be reused.
The spark plug clearance gap should be between 0.7 mm - 0.8 mm (0.028” to 0.03”)
Install the correctly gapped spark plug back into the original position.
Reinstall the ignition coil securely.
Close the top maintenance cover and tighten the screw.

greenpower_portable_inverter_hy2800-close_the_top_maintenance.png

TRANSPORTATION AND STORAGE

Do not overfill the tank.
Before attempting to transport allow generator to cool for at least 15 minutes.
To prevent fuel spillage, the generator should be secured upright in its normal operating position, with the start switch in the STOP position.
Do not drop or strike the generator when transporting.
Do not place heavy objects on the generator.

WARNING

Gasoline is extremely flammable and explosive under certain conditions.
Do not smoke or allow flames or sparks in the area.

STORAGE PROCEDURE

Drain fuel: remove gas tank cap, remove fuel filter and syphon fuel into an appropriate gasoline container. Rotate fuel valve to the open position and allow any remaining fuel to drain into the pot
Start the generator and allow fuel remaining in carburetor bowl to be used. Once the generator shuts off it can be stored.
To drain oil
- Set the start switch to the STOP position and make sure the fuel cap is closed tight.
- Loosen the cover screws and remove the maintenance cover.
- Place a container next to the engine to catch the used oil.
- Remove the oil filler cap/dipstick and drain the oil into the container by tilting the generator.
- Remove the screw, top maintenance cover and the spark plug.
- Fill the spark plug orifice with 2cc’s (about a tablespoon) of fresh oil. Pull the start motor 3-4 times to distribute the oil.
- Reinstall the spark plug, top maintenance cover and screw securely.
- Pull the starter grip slowly until you feel resistance, then return the starter grip gently. This closes the valves so moisture cannot enter.

TROUBLESHOOTING

If the generator still does not start, have an authorized Hyundai repair technician diagnose and repair the problem. Attempting service or repair without the proper training, tools and equipment may cause injury to you and/or others. It can also damage the generator or lead to hazardous conditions. For more information please refer to the troubleshooting guide below.

Problem	Symptoms	Correction
Generator will not start	Generator will not start	1. Switch on the on/off switch.<br>2. Refuel the generator.<br>3. Adjust engine choke as instructed on page 12.<br>4. Replace fouled spark plug with a compatible one as listed on page 27.<br>5. Add more oil.<br>6. Inspect gas tank and clean any clogged fuel line.
High resistance when pulling recoil starter	-	1. Add oil to the engine.<br>2. Clean air filter element as directed on page 18.
Difficulty starting	Engine requires many attempts to start	1. Disconnect load before starting.<br>2. Use the correct oil as shown on page 27.<br>3. Replace fouled spark plug as listed on page 27.
Generator does not produce power	No indicator lights or display on front panel	1. Check generator circuit breaker and reset if tripped.<br>2. Remove all loads and check the device for defects.

Problem	Symptoms	Correction
Overload indicator light keeps flashing	-	1. Adjust choke as per instructions on page 12.<br>2. Ensure connected devices do not exceed generator's maximum output.
No DC output	-	1. Disconnect battery, reset breaker, and test for shorts.<br>2. Clean battery connector nodes.
Generator outputs unstable power	Connected device does not operate consistently	Verify device startup requirements and ensure they do not exceed the generator's maximum output.
Device will not start up	-	1. Remove all loads, reset breaker, and check the device for defects.<br>2. Ensure connected devices do not exceed generator's maximum output.
Generator overheats	Operation is normal when generator is cool, overheating occurs with start of motion	1. Ensure proper ambient temperature and ventilation.<br>2. Use correct oil viscosity.<br>3. Replace fouled spark plug if necessary.

Problem	Symptoms	Correction
Engine idle fluctuates	-	1. Carburetor may need tuning, contact service center.<br>2. Clean air filter element as instructed on page 18.
Engine stops	Engine idles down and shuts off	1. Turn on the on/off switch.<br>2. Refuel the generator.<br>3. Clean air filter.<br>4. Adjust choke as per page 12.<br>5. Use correct oil and level as per page 27.<br>6. Replace fouled spark plug as per page 27.
Thick smoke released from exhaust	Exhaust fumes thick and dark	1. Adjust choke as per page 12.<br>2. Use correct oil as per page 27.<br>3. Clean air filter as per page 18.

Pros & Cons of Greenpower HY2800

Pros

High power output
Eco-friendly and efficient
User-friendly interface
Compact and portable
Multiple output ports

Cons

Weight can be heavy for some users
May take several hours to fully charge
Can generate noise when operating at high power
May require additional accessories (e.g. solar panels) for extended use

Customer Reviews of Greenpower Portable Inverter HY2800

“I recently bought the Greenpower Portable Inverter , and I couldn't be happier with my purchase. It's incredibly easy to use, and the power output is more than enough for my camping trips. I highly recommend it to anyone looking for a reliable and eco-friendly power source.” “The device is well-built and sturdy, and the battery life is impressive. I've used it for several hours without any issues, and the LED indicators make it easy to monitor the status of the device.” “One thing to note is that the device can be a bit heavy, so be prepared for that. But overall, it's a fantastic product that's worth every penny.” Despite the positive reviews, some customers have reported issues with the device's charging time and noise level. However, these complaints are relatively minor and do not significantly detract from the overall quality of the product.

Search Manuals in: portable-inverter

Read More