Introduction of Firefield Riflescope 2.5 Red Laser

The Firefield Riflescope 2.5 Red Laser is a versatile and reliable optical sighting device designed for use with hunting rifles and other firearms. This scope offers a 2.5x magnification and a 35mm objective lens, providing a clear and bright sight picture even in low-light conditions. The Firefield Riflescope 2.5 Red Laser features a red laser sight that can be adjusted for windage and elevation, making it easy to accurately aim your firearm at your target. With an estimated price of around $150, this riflescope is an affordable option for hunters and recreational shooters. The Firefield Riflescope 2.5 Red Laser is currently available for purchase from a variety of online retailers.

Specifications

Reticle Type: Mil-dot IR
Reticle Color: Green / red
Magnification: 2.5-10x
Objective Lens Diameter: 40mm
Exit Pupil Diameter: 13.3-4.4mm
Eye Relief: 69-50mm
Field of View (@100 yd): 34.86-11.53 ft
Diopter Adjustment: +3 to -3
MOA Adjustment (one click): 1/4
Battery Type (Reticle/Laser): CR2032/ 2x AG13
Battery Life: 80-150hr (reticle), 5hr (laser)
Lens Coating: Multi-coated
Waterproof: Yes
Shockproof: Yes
Dimensions: 215mm x 88mm x 80mm
Weight: 26.4oz

Features

2.5-10x magniﬁcation
Green / red illuminator mil-dot reticle
Bullet drop compensator
Built-in red laser
Multi-coated optics
Waterproof, shockproof

Firefield Riflescope 2.5 Red Laser Diagram

Objective Lens
Windage / Elevation Adjustments
223 Bullet-Drop Compensator
Magniﬁcation Ring
Diopter Adjustment
Red Laser on/off Switch
Reticle Illumination Adjustment
Red Laser Windage/Elevation Adjustments
Weaver Mount
Mil-Dot Reticle

Firefield Riflescope 2.5 Red Laser Installation

During riﬂescope installation it is important to strictly follow gun safety rules. The Fireﬁeld 2.5-10x40 Riﬂescope with Red Laser comes with a built in weaver mount base. In order to install:

Loosen the mounting screws on the weaver mount (9) with a ﬂat head screw driver.
Mount the scope on the riﬂe’s weaver base assuring the riﬂescope is mounted evenly and the mounting bolt is located in the groove of the weaver base.
Tighten the mounting screws on the weaver mount with a ﬂat head screw driver. Do not over tighten. Check that the riﬂescope is mounted evenly and securely on the riﬂe.
Finalize the installation procedure by checking that the scope is mounted with proper eye relief.

Warning: Having the riﬂescope mounted too close to the rear can injure the shooter during ﬁring. Ensure the riﬂescope is properly mounted before ﬁring to prevent injury.

BORESIGHTING THE RIFLESCOPE
Boresighting and test ﬁring should be performed safely on a ﬁring range. Laser boresights are a quick and accurate method to sight in riﬂescopes. Below is listed the traditional method of boresighting.

When mounting the riﬂescope on a bolt action riﬂe, remove the bolt; or when mounting to a semi automatic riﬂe, disassemble the riﬂe until there is a straight line of sight through the bore.
Use a target at least 20 yards to 50 yards away when sighting in the riﬂescope. Look through the bore of the weapon and locate the bullseye of the target.
Sight in the target through the bore and then make windage and elevation adjustments (see “Operating Windage and Elevation Adjustments” for instructions) to the riﬂescope until the reticle is centered on the bullseye. To verify the riﬂescope is accurately sighted in, always ﬁre a three-shot test group at 100 yards.
If you are still not centered, make the necessary amount of adjustments to move the reticle to the center of the target.
Again ﬁre a three-shot test group, and use the center of the group to determine ﬁnal adjustments.

Diopter Adjustment
The diopter is the measurement of the eye’s curvature. Fireﬁeld 2.5-10x40 with Red Laser Riﬂescope has a diopter adjustment (5) that helps attain a clear sharp reticle. If the reticle does not appear clear, crisp, or sharp, rotate the diopter adjustment ring until the reticle becomes clear and sharp. The adjustment should stay the same unless the riﬂescope’s operator changes.

OPERATING WINDAGE AND ELEVATION ADJUSTMENTS

In order to make windage and elevation adjustments (2), remove the adjustment covers. The elevation adjustment cover is located on top of the bullet drop compensation dial (3). The windage and elevation adjustments are 1/4 MOA, meaning that 1 click moves the point of impact 1/4 inch at 100 yards. Adjustments can be both felt and heard, allowing the shooter to make adjustments without looking at the dials. Note: When sighting in the riﬂescope, make adjustments without rotating the bullet drop compensation dial, hold the dial in place while adjusting the elevation. For the bullet drop compensator to work effectively, the dial must be set to 1 when sighting in the riﬂescope at 100 yards.

MAGNIFICATION ADJUSTMENT

The Fireﬁeld 2.5-10x40 Riﬂescope with Red Laser comes equipped with variable magniﬁcation options. By rotating the magniﬁcation ring (4) to the desired setting, shooters can ﬁnd a magniﬁcation that is appropriate for their shooting scenario. Note: Do not loosen the screw located on the magniﬁcation ring, doing so will cause problems with the variable magniﬁcation function.

MIL-DOT RETICLE

The Fireﬁeld 2.5-10x40 Riﬂescope with Red Laser uses a US Army Mil Dot reticle. Mil stands for millradian. A millradian is 1/6283.2th of a circle or 3.438 MOA. The millradian represents one unit at 1000 yards. To simplify, a target that is one yard tall at 1000 yards would measure 1 milradian.

CALCULATION METHOD
In order to determine distance there are three variables: target size, mils read, and range. In order to determine distance, the target size must be known. By using the reticle, mils read can be determined and the following calculation can be used to derive an estimated distance. Note: Determining mils read must be made at 10x magniﬁcation power.

Target size (in yards) x 1000/Mils read = yards to target
For example, a full size deer is approximately six feet long. Convert feet into yards, so the deer is 2 yards long. Now measure the deer with the mil-dot reticle; it is 4 mils long. Next, multiply the target size (2 yards) by the constant of 1000. This equals 2000. Now divide 2000 by mils read (4), this equals 500. So the deer is roughly 500 yards away. Finally adjust the riﬂescope’s Bullet Drop Compensator dial to the appropriate setting for an accurate shot.

BULLET DROP COMPENSATOR

The bullet drop compensation dial (3) allows for quick adjustments of the reticle for shooting targets at speciﬁc distances. This compensator was designed for a .223 caliber 55 grain bullet. The bullet drop compensation dial has distances of 1 (100yds), 2 (200yds), 3 (300yds), 4 (400yds) and 5 (500yds) marked directly on the dial. By using the mil-dot reticle to determine the distance, the bullet drop compensation dial is adjusted to that distance to acquire an accurate shot. Note: To work effectively, the dial must be set to 1 when sighting in the riﬂescope at 100 yards.
OPERATING THE ILLUMINATED RETICLE

The Fireﬁeld 2.5-10x40 Riﬂescope with Red Laser features an illuminated reticle. Illuminating the reticle improves visual distinction between the target and the reticle in low / poor lighting conditions. The reticle can be used in the following states: black (off), red or green. Red and green illumination consists of ﬁve levels of brightness.

In order to illuminate the reticle:

Rotate the reticle illumination adjustment (7) located on the left side of the riﬂescope
Turn the adjustment dial to the desired brightness level until the reticle stands out against the target.

Note: Settings 1-3 are intended for use in low lighting conditions. Settings 4 and 5 are intended for use in bright conditions.

OPERATING THE SIDE-MOUNTED LASER
The built-in 5mW red laser is used for target acquisition in close range, rapidly changing environments. The laser has built-in windage and elevation adjustments (8) that allow the laser to be accurately sighted in with your riﬂe.

To operate the laser:

Located the red laser on/off switch (6).
Push the button located on the back of the switch to turn the laser on.
Push the button again to turn the laser off.

Warning: Never point the laser designator directly at, or into someone’s eye. This may cause damage to the eye, or blindness. Avoid looking directly into the laser. Avoid shining the laser into mirrors or other reﬂective surfaces.

Note: Due to visual restrictions of 5mW red laser at greater distances in daylight, the most effective application is for close range/CQB scenarios. Shooters should evaluate the recurrent ﬁring range in their scenarios and sight the laser to their ﬁrearm’s point of impact at the range.

Description

The Firefield Riflescope 2.5 Red Laser features a durable and lightweight construction, weighing in at just 12 ounces. The scope is made from high-quality aluminum and is nitrogen-purged, making it waterproof and fogproof. The 2.5x magnification provides a clear and bright sight picture, while the 35mm objective lens allows for a wide field of view. The red laser sight has a brightness adjustment knob, allowing you to customize the intensity of the laser to suit your needs. The scope is also equipped with a quick-detach mount, making it easy to attach and remove from your firearm.

Replacing the Battery

ILLUMINATED RETICLE
If the reticle appears dim or fails to illuminate, the battery needs to be replaced. The Fireﬁeld 2.5-10x40 Riﬂescope with Red Laser uses a CR2032 to illuminate its reticle. 3 volt CR2032 batteries can be purchased at stores where batteries are sold or online. In order to replace the battery:

Remove the battery cap located on the reticle illumination adjustment (7) with a ﬂat head screw driver. Rotate the cap counterclockwise until it is removed. It might be necessary to hold the illumination adjustment in place to prevent it from rotating.
Remove the old battery and insert a new battery with positive (+) side up.
Replace the battery cap. Use a ﬂat head screw driver, rotate the cap clockwise until it is attached. It might be necessary to hold the illumination adjustment in place to prevent it from rotating.
Check that the reticle illumination is now functioning properly.

5mW RED LASER
If the laser appears dim or fails to operate, the battery needs to be replaced. The Riﬂescope with Red Laser uses 2 AG13 (LR44) batteries. These button cell batteries can be purchased in stores where batteries are sold or online. In order to replace the battery:

Grip the laser on/off switch (6) and rotate the on/off switch counterclockwise until it is removed.
Remove the old batteries and insert a new battery with positive (+) side up on both batteries.
Replace the on/ off switch and rotate clockwise until it is attached. Check to make sure laser is functioning.

Setup Guide

To set up the Firefield Riflescope 2.5 Red Laser, start by attaching it to your firearm using the quick-detach mount. Next, adjust the windage and elevation dials to zero in the scope. To do this, fire a few shots at a target and adjust the dials until the bullets are hitting the center of the target. Then, adjust the red laser sight to align with the scope's reticle. To do this, look through the scope and adjust the laser until it is aligned with the reticle. Finally, adjust the brightness of the laser to suit your needs and you're ready to go.

Firefield Riflescope 2.5 Red Laser Maintenance

Proper maintenance of the riﬂescope is recommended to ensure longevity. It is recommended that when the riﬂescope becomes dirty that it is wiped down with a dry or slightly damp cloth. Blow dirt and debris off all optics and then clean lenses with a lens cleaning cloth. No further maintenance is required.
WARNING: Never allow children to use or handle this product. The Fireﬁeld riﬂescopes are nitrogen purged and o-ring sealed unless otherwise noted. DO NOT disassemble the riﬂescope for any reason as this will void the warranty and could be hazardous. Any internal work should be handled by the manufacturer. Any tampering with the purge screw will void the warranty.

CAUTION: Use of controls or adjustments or performance of procedures other than those speciﬁed herein may result in hazardous radiation exposure.

Troubleshooting

Never ship back a riﬂescope without getting proper authorization beforehand. Doing so could result in losing the riﬂescope due to a multitude of reasons. If problems occur with your riﬂescope:

Check the ﬁrearm’s mount and verify that it is securely attached to the riﬂe. If there is any shifting, retighten the mounting system.
When test ﬁring a riﬂe, check the point of impact relative to windage and elevation adjustments.
Be sure to use factory-loaded ammunition of the same bullet type, weight, and preferably lot number when sighting.

Warranty

For warranty details and information. To view this manual in other languages visit https://firefield.com/

Pros & Cons about Firefield Riflescope 2.5 Red Laser

Pros

Durable and lightweight construction
2.5x magnification for a clear and bright sight picture
Red laser sight for accurate aiming
Quick-detach mount for easy attachment and removal
Affordable price

Cons

May not hold zero if the mount is not securely attached
Laser may not align properly if not adjusted correctly
May fog up or leak if not properly sealed

Search Manuals in: red-laser

Read More