Introduction

The Vevor Ref Center Tank Pump RTP24WS115V is a robust and efficient solution designed for transferring and circulating water in various applications, including aquariums, fountains, and irrigation systems. This pump features a powerful motor that delivers a high flow rate, ensuring quick and effective water movement. The Vevor RTP24WS115V is priced at approximately $129.99. Its compact design allows for easy installation in tight spaces, while durable construction ensures longevity and reliability.

PACKAGE CONTENTS

Item	Quantity
Ref Center Tank Pump	1
20 ft flexible Pipe	1
Instruction Manual	1

SPECIFICATIONS

Model	RTP15WS115V	RTP24WS115V
Voltage/Frequency	AC115V/60Hz
Current	1A	2.5A
Power	1/50HP	1/30HP
Flow	≥65GPH	≥100GPH
Lift	≥15ft	≥24ft
Inlet Diameter	1.0in
Outlet Diameter	0.4in
Water tank volume	1/2 gallon

Your Ref Center Tank Pump is designed as an automatic condensate removal pump for water dripping off an air conditioner evaporative coil. The pump is controlled by a float/switch mechanism which turns the pump on when approximately 2-1/4” of water collects in the tank and automatically switches off when the tank drains to approximately 1-1/4”. The Ref center pump you have purchased is of the highest quality workmanship and material. It has been engineered to give you long and reliable service.

Refcenter pumps are carefully packaged, inspected, and tested to ensure safe operation and delivery. When you receive your pump, examine it carefully to determine that there are no broken or damaged parts that may have occurred during shipment. If damage has occurred, make a notation and notify the firm that you purchased the pump from. They will assist you in replacement or repair if required.

READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THE REFCENTER PUMP. KNOW THE PUMP APPLICATION, LIMITATIONS, AND POTENTIAL HAZARDS. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. INSTALLATION AND CONNECTIONS ARE TO BE MADE BY A QUALIFIED PERSON.

SAFETY GUIDELINES

WARNING

DO NOT USE TO PUMP FLAMMABLE OR EXPLOSIVE FLUIDS SUCH AS GASOLINE, FUEL OIL, KEROSENE, ETC.
DO NOT USE IT IN EXPLOSIVE ATMOSPHERES. THE PUMP SHOULD BE USED WITH LIOUIDS COMPATIBLE WITH PUMP COMPONENT MATERIALS.
DO NOT HANDLE THE PUMP WITH WET HANDS OR WHEN STANDING ON A WET OR DAMP SURFACE OR IN WATER.
THIS PUMP IS SUPPLIED WITH A GROUNDING CONDUCTOR AND/OR GROUNDING-TYPE ATTACHMENT PLUG.
TO REDUCE THE RISK OF ELECTRICAL SHOCK, BE CERTAIN THAT IT IS CONNECTED TO A PROPERLY GROUNDED GROUNDING-TYPE RECEPTACLE.
IN ANY INSTALLATIONS WHERE PROPERTY DAMAGE AND/OR PERSONAL INJURY MIGHT RESULT FROM AN INOPERATIVE OF LEAKING PUMP DUE TO POWER OUTAGES, DISCHARGE LINE BLOCKAGE, OR ANY OTHER REASON, A BACKUP SYSTEM(S) AND/OR ALARM SHOULD BE USED.
SUPPORT PUMP AND PIPING WHEN ASSEMBLING AND WHEN INSTALLED. FAILURE TO DO SO MAY CAUSE PIPING TO BREAK, PUMP TO FAIL, MOTOR BEARING FAILURES, ETC.

Description

The Vevor Ref Center Tank Pump RTP24WS115V is built with quality and performance in mind. The pump features a stainless steel body and brass impeller, ensuring resistance to corrosion and wear. The 1 HP motor is designed to provide consistent and powerful performance, making it suitable for demanding applications. The pump also includes thermal overload protection, which helps in preventing motor burnout during extended use.

The pump's design includes a self-priming feature, allowing it to start pumping without the need for manual priming. This makes it convenient for use in a variety of settings, from industrial plants to commercial cooling systems.

INSTALLATION

Before installing the pump, allow the air conditioner to cycle several times, collecting condensate in a separate container to help flush any residual oils that may remain in the system.
Carefully unpack the pump. Remove the cardboard packing from the motor cover air slots. Carefully slide the packing away from the pump. This packing is used to prevent switch movement during shipment (Figure 1).
Mounting the pump: the tank has two slots provided to mount the unit.
The slots are located on the ends of the tank (Figure 5). The unit should be mounted either on the side of the air conditioner unit or a nearby wall. The pump must be level, and the inlet must be below the coil drain. Conduit fittings are not compatible with the plastic pump housing.
The pump should not be installed in a manner that will subject it tosplashing or spraying.
This pump is not intended for use inside air plenums.

ELECTRICAL CONNECTIONS

WARNING

Shut off the electrical power at fuse box before making any connections.
All wiring must comply with local codes.
Line voltage: Connect the power cord to the line voltage specified on the motor and nameplate. The power cord must be connected to a constant source of power (not a fan or other device that runs intermittently). If the power cord does not have a plug, wiring is as follows: green (or green/yellow)-ground. Black (or brown)-line. White (or blue)-neutral.
Safety switch: The safety overflow switch should be connected to a class II low-voltage circuit. To control a thermostatic circuit, the COM and NO connections from the safety switch are to be wired in series with the low-voltage thermostat circuit to shut down the heating/AC circuit. The COM and NC switch contacts may be used to actuate a low-voltage alarm circuit (connected in series) if the heating/cooling system cannot be disrupted. The safety switch comes from the factory with leads connected to the COM and NO switch terminals. Typical hook-up of “NC” circuits would be (Figures 2 & 3),

VEVOR Ref Center Tank Pump - terminals 2

PIPING

Run flexible tubing or pipe from the evaporator drain into one of the three pump inlets. Be sure inlet piping is sloped downward to allow gravity flow (Figure 4). Extend the inlet piping into the tank from 1 to 3 inches to ensure that it will not interfere with proper float operation. Be sure that the inlet piping is cut at an angle where it enters the tank.
The outlet piping should be flexible tubing secured with a hose Clamp (not provided) or pipe (3/8 inch ID. maximum to prevent excessive flow back to the unit). From the condensate unit, extend the discharge piping straight up as high as necessary. Do not extend this line above the head/GPH of the particular model being installed. From this high point, slope the discharge line down slightly to a point above the drain area, then turn down and extend to a point below or approximately level with the bottom of the condensate unit. This will give a siphoning effect which will improve the efficiency of the condensate unit and will, in most cases, eliminate the need for a check valve (Figure 5). If it is not possible to slope the discharge line down, make an inverted “U” trap directly above the pump at the highest point.

Setup Guide

To set up and operate the Vevor Ref Center Tank Pump RTP24WS115V, follow these steps:

Unpack and inspect the pump for any damage during shipping.
Mount the pump securely on a level surface to prevent vibrations.
Connect the inlet and outlet pipes according to the manufacturer's instructions.
Plug in the pump to a 115V electrical outlet.
Turn on the pump and check for any leaks or unusual noises.

Ensure all connections are secure and follow the user manual for specific configuration settings.

SERVICE INSTRUCTIONS

WARNING

Make certain that the unit is disconnected from the power source before attempting to service or remove any component!
Be sure the floats move freely. Clean as necessary (Figure 6).
Clean the tank with warm water and mild soap.
Check the inlet and outlet piping. Clean as necessary. Be sure there are no kinks in the line that would inhibit flow.

VEVOR Ref Center Tank Pump - outlet piping

TESTING

Turn on the power.
Remove the motor/tank cover assembly and hold level.
Test the motor switch by raising the motor switch float with a finger (Figure 6). The motor should turn on just before the float contacts cover.
Test the safety switch by raising the safety switch float with a finger. The safety switch should activate before the float contacts cover.
Replace the motor/tank cover assembly on the tank.
This pump is suitable for gas furnace condensate applications. Caution must be taken to ensure the acidity of condensate does not increase below the average pH of 3.4 (to prevent localized pocket of acid that acts like a battery causing pitting) by routinely cleaning or flushing the tank with fresh water.

Troubleshooting

Common issues with the Vevor Ref Center Tank Pump RTP24WS115V and their solutions include:

No Power: Check the power cord and ensure it is properly plugged into a working outlet.
Low Flow Rate: Inspect the pipes for any blockages or kinks and ensure proper alignment.
Overheating: Ensure adequate ventilation and check if the thermal overload protection has been triggered.

WARRANTY

Your product is guaranteed to be in perfect condition when it leaves our factory. It is warranted against defective materials and workmanship for a period of 12 months from the date of purchase by the user. Any product that should fail for either of the above two reasons and is still within the warranty period will be repaired or replaced at the option of the Ref center.

Pros & Cons

Pros

High Performance: Delivers high flow rates and pressures.
Durable Construction: Built with stainless steel and brass components.
Self-Priming: No need for manual priming, making it convenient to use.
Protects the motor from burnout.

Cons

Noisy Operation: Some users report it can be noisy during operation.
Regular maintenance is necessary to ensure optimal performance.
Pricier compared to some other models on the market.

Customer Reviews

Customers have generally been satisfied with the performance of the Vevor Ref Center Tank Pump RTP24WS115V. Many praise its reliability and efficiency in various industrial applications. However, some have noted that it can be noisy and requires regular maintenance to keep it running smoothly.

A common complaint is the higher cost compared to other pumps, but most agree that the quality and performance justify the investment.

Search Manuals in: rtp24ws115v

Read More