Introduction

The Philips Norelco Cord Tripleheader Shaver S3310 ComfortCut Blade System with 4-direction flex heads that adjust to the contours of the face provide a comfortable and effective shaving experience. This rechargeable shaver, which is intended for dry use, may run cordlessly for up to 45 minutes after an 8-hour charge. At about $59.99, it's a great option for anyone looking for a dependable electric shaver because it's affordable and high-quality.

Specifications

Flexible heads on a triple-header design adapt to the natural curves of your face.
For reliable power and battery-free operation, use a cord.
The ability to shave both wet and dry.
An ergonomic handle allows for easy handling and grip.
Using a pop-up trimmer for detailing makes cleaning quick and simple.
Use a travel lock to avoid unintentional startup.

Features

ComfortCut Blade System
Shaving Unit
Protective Cap
Individually
Floating
Heads

Overview

comfortcut_blade_system_philips_norelco_cord_tripleheader_shaver_s3310.png

shaving_unit_philips_norelco_cord_tripleheader_shaver_s3310.png

LED Multi-Purpose Display

The display provides the following information:

Charging Indicator
When the shaver is charging, the charging light blinks green.
Full Charge Indicator
When the battery is fully charged, the charging light lights up green continuously. After approximately 30 minutes the charging light goes off to save energy.
Low Battery Indicator
When the battery is almost empty (5 or less shaving minutes left), the charging light blinks orange. When you turn the shaver OFF the charging light continues to blink orange for a few seconds.
Shaver Head Replacement Indicator
Once a year, depending on your shaving behavior, the shaver head replacement symbol will light up orange continuously, as a reminder to replace the shaver heads.

led_multi-purpose_display_philips_norelco_cord_-tripleheader_shaver_s3310.png

Before First Use

Charge the shaver before you start using it (see ‘Charging’).

Important

Only use the power cord provided to charge the shaver.
The power plug transforms 100-240V AC to less than 24V DC.

Philips Norelco Cord Tripleheader Shaver S3310 Charging

Charging or recharging at temperatures below 40ºF/4,5ºC or higher than 95ºF/35ºC adversely affects lifetime of batteries.

If the shaver is subjected to a major change in temperature, pressure or humidity, let it acclimatize for 30 minutes before using.
Charging or recharging requires 8 full hours.
A fully charged shaver has a cordless shaving time of up to 45 minutes.
The shaving time may be less than 45 minutes as a result of your shaving behavior, cleaning habits or beard type.
When charging shaver for the first time or after a long period of non-use, charge until the charging light lights up continuously.

Connect cord directly to shaver and connect the charging plug into any 100V to 240V AC outlet. Use only the power cord provided.
- An adaptor plug may be necessary for charging plug usage in some foreign countries.
  Use an attachment plug adaptor of the proper configuration for the power outlet.
  The charging plug will automatically convert to work on 100V to 240V AC systems.
- The display on the shaver will indicate shaver is charging.
Charging and recharging requires a full 8 hours. A fully charged shaver has a cordless shaving time of up to 45 minutes.
- When the battery is fully charged, the charging light lights up continuously.
  After approximately 30 minutes, the charging light goes out to save energy.

Description

With its stylish and ergonomic design, the Philips Norelco Cord Tripleheader Shaver S3310 is easy to grip and control. To provide a close and even shave, the triple-header system's three revolving heads bend and conform to the contours of your face. With a straightforward on/off button and a pop-up trimmer for fine detailing, the shaver was made with user convenience in mind.
The corded design provides continuous power throughout your shaving session, removing the need for recharging. Because it can be used for both dry and wet shaving, this shaver is also adaptable to a range of skin types and tastes.

Recharging

Recharging requires 8 hours.
Recharge when the charging light on the shaver display blinks orange.

Put It To The Test & Shaving Tips

21 Day Trial and Conversion Process. It is a fact that your skin and beard need time to adjust to a new shaving system.
Use your new shaver exclusively for 3 weeks to fully enjoy the closeness of a Philips Norelco shave.
At first you may not get as close a shave as you expect, or your face may even become slightly irritated. This is normal since your beard and skin will need time to adjust. Invest 3 weeks and you’ll soon experience the full joy of your new shaver.
Stick with it! If you alternate shaving methods during the adjustment period, it may make it more difficult to adapt to the Philips Norelco shaving system.
If you are still not convinced after 21 days, Philips Norelco will refund you the full purchase price as long as the request is received within 45 days of purchase.

How To Shave With An Electric Shaver

This symbol indicates that the shaver can be rinsed under running tap water.
Use this shaver for its intended household use as described in this manual.
Shaving with a clean face gives the best results.

Shaving

Turn shaver ON by pressing the on/off button once. Shave against the direction of beard growth using circular movements.
Stretch your skin with your free hand so blades can lift and cut whiskers. Gently press shaver to skin so the floating heads can follow the contours of your face.
DO NOT press too hard. Too much pressure can pinch the skin into the combs.
Turn shaver OFF by pressing the on/off button once.
Clean the shaver after each use (see chapter ‘Cleaning’).
Put the Protective Cap on the shaver to protect shaver heads.

Trimming

To groom sideburns and moustache:

Turn shaver ON.
Push down spring-release trimmer switch.
The trimmer can be activated while the shaver is running.
Hold trimmer and make downward strokes with gentle pressure.
Close trimmer by pressing trimmer down.
Turn shaver OFF.

Setup Guide

The Philips Norelco Cord Tripleheader Shaver S3310 can be operated by

Just connect it to a power source. Before using the shaver, make sure it is clean and clear of any debris. All you have to do is switch on the shaver and use uniform, smooth strokes to shave dry.
Apply your favorite shaving cream or gel and continue as normal to achieve wet shaving.
The shaver is ready to use right out of the box and doesn't require any more parts to install or configure.
You may detail your mustache, sideburns, or any other region that needs precise cutting by sliding the trimmer button up to reveal the pop-up trimmer.

Cleaning

Always clean your shaver after each use.
Always switch shaver OFF, unplug and remove power cord before cleaning.
Never clean, remove or replace head assembly while motor is on.
Do not apply pressure to combs. Do not touch shaver heads with hard objects as this may dent or damage precision-made slotted combs.
Do not use shaver if combs are damaged or broken. Facial injury may occur.
Do not use compressed air, abrasives, scourers or aggressive liquids such as gasoline or acetone to clean the shaver.

Cleaning the Shaving Unit

The shaver heads may be quickly cleaned after each use by rinsing with hot water: Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.

Regular cleaning guarantees better shaving results.
Do not immerse shaver in water.
While rinsing shaver heads, water may drip out of the base of shaver. This is a normal occurrence.

Always turn shaver OFF, unplug from outlet and remove power cord from shaver.
Press the Release Button to open the shaving unit.
Clean inside shaver heads and hair chamber by running under hot water.
Clean outside of shaving unit by running under hot water.
Close the shaving unit and shake off excess water.
Be careful not to hit the shaving unit against anything while shaking off excess water.
Open shaving unit again and leave open to air dry.

NOTE: Do not wipe or dry the shaving heads with a towel or tissue. This could damage the shaving heads.

If you used foam or gel to shave, make sure to rinse all of it off to prevent residue build-up from clogging shaving heads.
If the shaving unit becomes detached from the shaver, you can easily reattach it.

Extra-thorough Cleaning Method

Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.

Turn shaver OFF, remove the charging plug from the outlet and power cord from the shaver.
Press the Shaving Unit Release Button to open the Shaving Unit.
Pull the shaving unit off the shaver.
Turn the lock counterclockwise to unlock (A) and remove the retaining frame (B).
Remove and clean one set of cutters and combs at a time.
Separate the cutter from the comb and clean both parts under warm tap water.
Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored
Put the shaving head back into the shaving unit.
Make sure the projections of the shaving head fits exactly into the recesses.
Repeat the process for the other two sets of cutters and combs.
Replace the retaining frame (A) and turn the lock clockwise until it locks into place (B).
Insert the notch of the shaving unit into the slot in the top of the shaver and then close the shaving unit.
NOTE: If the shaving unit does not close smoothly, make sure you inserted the shaving heads properly and that the retaining frame is locked.
Put the Protective Cap on shaver to protect heads.

After Each Use: Trimmer

Push down spring-release trimmer switch.
Turn shaver ON and rinse trimmer under warm tap water.
Turn shaver OFF and close the trimmer.
Lubricate the trimmer teeth with one drop of mineral oil every 6 months.

Replacing the Shaver Heads

Replace the shaver heads once a year for optimal shaving results.
Replace damaged or worn shaver heads with model SH30 Philips Norelco shaver heads only.

Shaver Head Replacement Indicator

The shaver head replacement indicator symbol will light up orange continuously to remind you to replace your shaver heads.

Turn shaver OFF, remove the charging plug from the outlet and power cord from the shaver.
Press the Shaver Head Release Button to open the shaving unit.
Pull the shaving unit off the shaver.
Turn the lock counterclockwise to unlock (A) and remove the retaining frame (B).
Remove the shaver heads and place the new shaver heads in the shaving unit.
Make sure the projections of the shaving heads fit exactly into the recesses.
Replace the retaining frame (A) and turn the lock clockwise until it locks into place (B).
Insert the notch of the shaving unit into the slot in the top of the shaver and then close the shaving unit.
NOTE: If the shaving unit does not close smoothly, make sure you inserted the shaving heads properly and that the retaining frame is locked.
Press and hold the on/off button for at least 5 seconds to reset. The orange shaver head replacement indicator symbol will go out.

Storage

Be sure shaver is turned off. Remove cord from outlet and shaver before storing in a safe, dry location where it will not be crushed, banged, or subject to damage.

Do not wrap power cord around shaver when storing.
Store cord in a safe location where it will not be cut or damaged.
Do not place or store shaver where it can fall or be pulled into a tub or sink, water or other liquid while plugged in. C w Put the Protective Cap on shaver to protect heads.

Shaver S3310 Accessories

Replacement Heads

Model SH30 - For maximum shaver performance, replace your Philips Norelco shaver heads once a year.
Philips Norelco Shaver Accessories may be purchased at a store near you, or on our website https://www.philips.com/store

Troubleshooting

Make sure the shaver is hooked into a functional power outlet if it isn't turning on.
Verify that the power button is operating properly and that the cord is undamaged.
The shaver's dull blades could be the cause of its poor cutting performance.
Performance may be maintained by routinely cleaning and maintaining the blades. As advised by the manufacturer, replace the blades.

For any electrical issues or malfunctions, refer to the user manual or contact Philips customer support.

Pros & Cons

Pros

Effective Shaving: A close and comfortable shave is made possible by the triple-header design.
Corded Convenience: Consistent power throughout use eliminates battery life concerns.
Adaptable Use: Fits both wet and dry shaving.
Ergonomic Design: Easy mobility and a comfortable grip.
Easy Cleaning: Both cleaning and maintaining are easy.

Cons

Limited Portability: Compared to cordless shavers, the corded configuration limits mobility.
There is no travel case included. Travel protection may need to be purchased separately.
Costs of Blade Replacement: Changing blades on a regular basis could raise overall expenses.

Customer Reviews

The Philips Norelco Cord Tripleheader Shaver S3310 has received high marks from customers for both its functionality and affordability. The close shave it offers and the ease of corded operation are highly praised by reviewers. However, some consumers have complained that the wire might occasionally get in the way and that the shaver can be noisy.

The absence of a travel case, which some users find cumbersome for travel, is a frequent grievance. The majority of consumers consider this shaver to be a dependable and efficient grooming instrument in spite of these small problems.

FULL TWO YEAR WARRANTY

Philips Electronics North America Corporation warrants each new Philips Norelco Product, Model S3310 (except cutters and combs) against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.*

NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Search Manuals in: s3310

Read More