Sierra Comfort Portable Massage Table SC-1004 Introduction

Massage Table combines functionality with comfort, featuring a beech hardwood frame and 2 inches of high-density foam for durability and ease of use. Its adjustable height ranges from 16.5” to 24.5”, accommodating various treatment styles. The table conveniently folds for transport and storage, making it ideal for mobile therapists. Priced at approximately $249.99, it is a practical choice for both professionals and home users.

Specifications

Weight Capacity: 500 lbs
Table Length: 72 inches (183 cm)
Table Width: 28 inches (71 cm)
Height Adjustment Range: 24-34 inches (61-86 cm)
Frame Material: Aluminum
Cushion Material: High-Density Foam
Carrying Weight: Approximately 30 lbs
Folded Dimensions: 72 x 6 x 4 inches (183 x 15 x 10 cm)

TABLE SETUP & USE

STEP 1: Place the massage table on its side with the handle straps facing upward.
STEP 2: Release the buckles at the end of the table and open half-way. Remove all included accessories from inside the table.
STEP 3: Before each use, thoroughly inspect all areas of the massage table; pay close attention to the support wires/cables, being sure that no areas are severed or frayed. The wires should pivot freely when positioned accordingly. Be certain no areas are overtightened.
STEP 4: Stand behind the massage table and grasp both handle straps. Pull the straps toward you so that the table straightens and the legs release. To turn table upright, move around to its opposite side; grasp one strap and place your outside foot down onto the bottom leg, pulling up and in on the strap until the table turns on all four legs.
STEP 5: Once all four table legs are positioned on the ground, push downward on the middle of the table so that it is level. Be certain all feet are flat on the ground and resting on a firm and level surface.
STEP 6: The two safety support bars included with your table should be installed to ensure that the table legs are locked in place when standing. For each set of bars, thread opposing ends together to create one long bar matching the length between the front and rear legs of the table.
STEP 7: With the table standing, or on its side, unscrew the upper leg knobs on both legs that are facing you.
STEP 8: Thread the exposed screws through the eyelets at each end of the support bar.
STEP 9: Screw the legs knobs back into place being sure that the support bar is fully secured. Repeat all steps on the opposite side of the table until setup is complete.
STEP 10: When moving onto or off of the tabletop be sure to do so with ease and towards the center of the table where most stable.
STEP 11: When receiving treatment, the client/patient should remain immobile with weight and body position distributed evenly along the tabletop.
STEP 12: Do not apply more than 450 lbs. (205 kg) of total working weight onto the table.
NOTE; the total working weight is equal to the weight of the subject on the table plus the weight added through downward pressure.
STEP 13: Avoid overloading one side of the table. Uneven and excess weight on one side of the tabletop may cause the table to lift, tilt, or collapse; potentially resulting in serious injury.
ALERT: It is extremely important that you install the support bars prior to using the table in order to avoid this potential risk.

Description

Sierra Comfort is designed with both functionality and comfort in mind. The high-density foam cushion provides excellent support and comfort for clients, while the adjustable height setting ensures that therapists can work in a comfortable position. The table also comes with built-in face cradle and armrests, which can be adjusted to suit different client needs. The aluminum frame is lightweight yet strong, making it easy to transport and set up in various locations.

The table's ergonomic design ensures that it supports the natural contours of the body, providing a comfortable and relaxing experience for clients. Additionally, the easy-to-clean vinyl surface makes maintenance a breeze.

INSTALLING ACCESSORIES

PLEASE NOTE; THAT HE ACCESSORIES INCLUDED WILL VARY ACCORDING TO THE SPECIFIC ITEM/MODEL ORDERED. YOU MAY DISREGARD ANY STEPS BELOW IF NOT RELATED TO YOUR ITEM.

HEADREST & FACE PILLOW

STEP 1: Place headrest face down and fully release the locking lever so that the tubular arms are able to pivot freely.
STEP 2: Unfold the tubular arms and insert into the circular openings at the end of the table.
STEP 3: Adjust the angle of the headrest to the desired position and then move the lever downwards to lock into place. Secure the face cushion to the headrest by placing it accordingly onto the Velcro strips.
STEP 4: If the headrest appears loose or slips down when pressure is applied; (1) release the lever so it unlocks (2) turn the lever clockwise for 1-2 rotations (3) move the lever downward into the locked position.

Sierra Comfort Portable Massage Table SC-1004 ARM SHELF

STEP 1: Insert the tubular arms of the headrest through the loops at the end of the arm shelf straps.
STEP 2: Insert the tubular arms into the circular openings at the end of the table.
STEP 3: Thread the remaining strap up through and over the end of the headrest.
STEP 4: Thread the strap through its buckle. Adjust the arm shelf to the desired horizontal position and tighten all straps accordingly.

Setup Guide

Setting up the Sierra Comfort Portable Massage Table SC-1004 is straightforward and can be completed in a few steps.

First, unfold the table from its compact, folded position. Next, adjust the legs to the desired height using the easy-to-use adjustment mechanism.
Ensure all legs are securely locked into place before use. Attach the face cradle and armrests according to your preference and adjust them as needed.
Finally, lay out the high-density foam cushion and ensure it is securely fastened to the frame.
For added stability, make sure the table is placed on a level surface and all adjustments are securely locked.

MAINTENANCE & CARE

UPHOLSTERY CARE
Remove daily dirt and grime from the table with a mild soap and warm water solution. Dry with soft, lint-free cloth. When disinfecting, use an isopropanol (rubbing alcohol) based hospital grade disinfectant cleaner. Be sure it is approved for use on polyurethane vinyl before applying. For minor stains, use a mild non-abrasive cleaner on a damp cloth. Gently wipe the surface to remove the stain and rinse thoroughly with warm water. Dry with a soft lintfree cloth.
WOODCARE
The massage table is made of select hardwoods and is finished with lacquer that requires no special care. If desired, you may polish occasionally with a quality wood care product.

STORAGE

When not in use, store the table in a cool and dry area away from direct sunlight. Do not expose the table to extreme temperatures or moisture.

For information and questions regarding our products and/or services, please visit us at http://www.sierracomfort.com

SAFETY & WARNING SYMBOLS

The safety and warning symbols inserted throughout the instruction manual are for the purpose of preventing injury or damage to the user, client, or product. Take special note to any instruction indicated by the warning or caution symbols, and always be mindful when using your product.

READ ALL WARNING STATEMENTS BELOW IN ORDER TO PREVENT INJURY/ MALFUNCTION

WARNING

Prior to using your table, please carefully read the owner's manual, instructions, and any warning labels included on the product.
Before using, thoroughly inspect all areas of the massage table and included accessories for any manufacturing defects; especially beware of warped or cracked wood, frayed / deteriorated support wires, loose hardware, and misalignment of any parts.
Prior to use, be sure that all four table legs are adjusted to the same height. Always position your table in an area having a level surface so that all four feet remain firmly on the ground.
When moving onto or off of the tabletop, be sure to do so with ease and towards the center of the table where most stable.
When receiving treatment, clients/patients should remain immobile with weight and body position distributed evenly along the tabletop.
Avoid any sudden and direct pressure on the tabletop. Never stand, jump, or move erratically on the table.
Never should there be more than one person on the table at once.
Do not apply more than 450 lbs. (205 kg) of total working weight to the table. NOTE; the total working weight is equal to the weight of the subject on the table plus the weight added through downward pressure.
Do not apply more than 25 lbs. (11.33 kg) of total working weight to the face cradle.
Avoid overloading one side of the table. Uneven and excess weight on one side may cause the table to lift, tilt, or collapse.
Prior to EVERY use, the two safety support bars MUST be installed.

Troubleshooting

If you encounter any issues with your Sierra Comfort Portable Massage Table SC-1004, here are some common problems and solutions:

Table Legs Not Locking Properly: Check that all legs are fully extended and that the locking mechanism is engaged correctly.
Cushion Not Securing Properly: Ensure that the cushion is aligned with the Velcro strips on the table frame and press firmly to secure.
Face Cradle Not Adjusting: Make sure that the adjustment mechanism is free from any obstructions and that it is turned in the correct direction.

Always follow the manufacturer's instructions for assembly and use to avoid any potential safety hazards.

Pros & Cons

Pros

Portability: Lightweight and easy to transport, making it ideal for therapists on the go.
Adjustable Height: Allows for comfortable working positions for therapists of different heights.
Durable Construction: Made from high-quality materials ensuring long-term durability.
Comfortable Cushioning: High-density foam provides excellent comfort and support for clients.
Easy Setup: Quick and easy assembly process.

Cons

Weight Limitation: Maximum weight capacity of 500 lbs may not be suitable for all clients.
No Storage Compartment: Lack of built-in storage for accessories and supplies.
Cleaning Challenges: Vinyl surface can sometimes be difficult to clean thoroughly.

Customer Reviews

Customers have generally praised the Sierra Comfort Portable Massage Table SC-1004 for its sturdiness, ease of setup, and comfort. Many therapists appreciate its portability and adjustable height settings. However, some users have noted that the vinyl surface can be somewhat challenging to clean and that there is no built-in storage compartment.

Overall, the table has received positive feedback for its value and performance.

Most Common Complaints

Difficulty in cleaning the vinyl surface.
No built-in storage for accessories.
Some users find the weight limit restrictive.

Search Manuals in: sc-1004

Read More