Introduction

Introducing the Etekcity Smart Shiatsu Foot Massager EM-SF3, a cutting-edge gadget that promises to provide your feet the most comfort and relaxation possible. By integrating cutting-edge shiatsu massage methods with intelligent technology, this foot massager provides a healing experience that targets pressure points to reduce tension, enhance blood flow, and ease sore muscles. With adaptable settings that allow you to change the heat and intensity levels, it meets your individual demands for a customized massage. With its elegant appearance and intuitive controls, the EM-SF3 is a must-have for any at-home wellness regimen, providing high-quality massage therapy at your fingertips.

Package Contents

1 x Foot Massager
1 x AC Power Adapter
1 x Quick Start Guide
1 x Warranty Card

Specifications

Power Supply	Input: AC 100-240V, 50-60Hz Output: DC 12V, 3A
Rated Power	36W
Dimensions	18.4 x 15.4 x 10.7 in / 467 x 390 x 272 mm
Weight	12.1 lb / 5.5 kg
Operating Temperature	32°–104°F / 0°–40°C
Storage Temperature	14°–122°F / -10°–50°C
Bluetooth® Version	5.0
Compatible Systems	Android 5.1/iOS 9.2 and above

Function Diagram

Timer Display
Bluetooth Indicator
Timer Button
Heat Button
Intensity Button
Mode Button
Power Button
Massager Housing
Detachable Foot Sleeves
AC Power Adapter Input
AC Power Adapter

Using the Massager

Before using, connect the AC power adapter to the massager [Figure 1.1] and plug in to an outlet.

Tap to start the massager. Tap again at any time to stop the massager.
Tap to adjust the massage time between 15, 20, and 25 minutes.
Note: The timer will restart each time you tap .
Tap to turn the heating function on or off.
Tap to adjust the massage air pressure level between 1 (Low), 2 (Medium), and 3 (High).
Tap to change the massage mode between Mode 1, 2, and 3.
- Mode 1: The massage rollers move slower for a gentler massage.
- Mode 2: The massage rollers move faster for a more powerful massage.
- Mode 3: The massage rollers will start and pause regularly for a massage with more air pressure.

Note: The default settings when the massager is turned on are a 15-minute timer with heat off and low intensity in massage mode 1.
CAUTION: Never stand with feet in the massager. Only use while seated.

Tips

Do not use this massager for more than 30 minutes at a time.
If the massager is used for too long, overheat protection will activate and the massager will shut down. Allow the massager to cool for about 40 minutes before using again.
Avoid using with only 1 foot unless necessary, as this may shorten the life of the massager.
If you feel uncomfortable or feel pain while using the massager, stop using it immediately. Consult a physician if necessary.

Description

A professional-grade foot massager with a deep, soothing massage function is the Etekcity Smart Shiatsu Foot Massager EM-SF3. The massager targets important pressure spots on the soles of your feet by combining shiatsu, rolling, and kneading techniques. This aids in easing pain, lowering stress, and enhancing circulation. Additionally, the EM-SF3 offers a heating feature that can assist relieve sore muscles and offer more support. The massager's integrated handle and small size make it convenient to carry and store. The massager is straightforward to use because it has an integrated timer that lets you set it to shut off automatically after a predetermined period of time.

App Operation

Note: The massager must be plugged in before using with the app.

Tap to turn the massager on or off.
Scroll on the central display to select a timer. Choose between 15, 20, and 25 minutes.
Tap to change the massage mode between Mode 1, 2, and 3.
Tap to adjust the massage pressure level between 1 (Low), 2 (Medium), and 3 (High).
Tap to turn on or off the heating function.

Favorite Settings

A Favorite is a shortcut to easily apply saved settings to your massager.
To add a Favorite, tap Favorites and follow the in-app instructions.
You can also tap in the upper right corner to save your current settings as a Favorite.
Tap Favorites to view a list of all your saved Favorite settings. Tap Apply to immediately use a Favorite setting. Tap on a Favorite to edit it. To remove a Favorite, swipe left and tap . Tap to collapse the list.
Note: You can change your settings at any time, even while using a Favorite.

Massager Settings

Tap to see Device Settings. In Device Settings, you can change the massager’s name and icon, upgrade firmware, and delete the massager from your VeSync app.

Note:

Regularly upgrade your firmware to make sure your massager works correctly.
You can also delete your massager from the My Home screen in the VeSync app.
- iOS: Swipe left on the massager’s name to delete.
- Android: Press and hold for 2 seconds on the massager’s name to delete.

VeSync App Setup

Note: Due to continuing updates and improvements, the VeSync app may appear slightly different. In case of any differences, follow the in-app instructions.

To download the VeSync app, scan the QR code, or search “VeSync” in the Apple App Store or Google Play Store.
Note: For Android users, you must select Allow to use VeSync.
Open the sync app. If you already have an account, tap login. To create a new account, tap Sign Up.

Configuration

Set up your massager with the VeSync app.

Press to turn on the massager. The massager will automatically go into Bluetooth pairing mode, and will blink.
Tap
Tap Massager and select your massager.
Note: Your phone’s Bluetooth must be turned on to connect to the massager. If prompted, turn on Bluetooth in your phone settings.
Tap Connect. When the app discovers your massager, tap on its name.
Note: Your phone’s GPS / Location service must be turned on to discover the massager. If prompted, turn on Location in your phone settings.
Give your massager a unique name, or use the default name.
Note: Tap to change the massager icon.You can change the name and icon at any time by going to the massager screen and tapping

Maintenance

Launder the removable foot sleeves when necessary. Wash on delicate cycle in cool or warm water (lower than 122° F / 50°C).
Note: Laundering may slightly discolor the cloth cover. Wash with dark colors.
Use a soft cotton cloth and non-abrasive detergent to clean the massager. Never immerse in water.
Keep away from heat sources and direct sunlight.
Do not store in extreme temperatures. Storage temperature should be 14°-122° F / -10°-50° C.

Important Safety Information

To reduce the risk of burns, fire, electric shock, or other injury, follow all instructions and safety guidelines. Read all instructions before using.

DANGER

Always unplug this massager from the electrical outlet immediately after using and before cleaning.
Examine your massager’s fa bric covering for any sign of damage before using. If there are any blisters, tears, or cracks, do not use your massager.
Never use pins or other metallic fasteners with this massager.
Keep dry. Do not use the massager if it is wet.

WARNING

Do not leave your massager unattended when plugged in. Unplug when not in use, and before putting on or taking off parts.
Do not operate under a blanket or pillow.
Overheating can occur causing fire, electric shock, or other injury.
Close supervision is necessary when your massager is used by or near children, invalids, or persons with disabilities.
Only use this appliance as directed in this manual.
Do not use attachments not recommended by Etekcity.
Do not use the massager if it has been dropped, if it is not working properly, or if any of its parts (including the cord or plug) are damaged.
Contact Customer Support (see page 24).
Do not use the massager if it has been dropped in water.
Turn off and stop using the massager immediately if it makes an unusual noise, emits a strange smell, or if smoke comes from it.
Contact Customer Support (see page 24).
Do not carry the massager by the cord .
Keep the cord and adapter away from heated surfaces.
Do not insert any object into any opening unless directed by the manual.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
To disconnect, turn off all controls, then unplug .
The massager may get hot enough to cause burns on any control setting.
Do not use when sleeping.
Do not use on infants, disabled persons, or people who are sleeping or unconscious.
Do not use on sensitive skin or if you have poor blood circulation.
Check the skin in contact with the heated area of the massager frequently to reduce the risk of blistering.
Do not use this massager on swollen or inflamed areas.
If you have any injury, disease, or reduced feeling in your lower legs or feet, then consult a physician before using.
The massager is not intended for medical use or as a substitute for medical attention.
Do not crush the massager.
Do not use this massager for more than 30 minutes at a time.
Never stand with feet in the massager.
Only use while seated.
Do not stand on the massager or place heavy objects on it.
Do not remove the housing cover .
Do not try to repair the massager. Contact
Customer Support (see page 24) if the massager is malfunctioning.
Positioning your massager incorrectly or applying excess pressure may result in pain or injury.
Not for commercial use.
Household use only.

SAVE THESE INSTRUCTIONS

Troubleshooting

Problem	Possible Solution
The massager won't turn on.	Make sure the massager is plugged in.
The massager won't turn on.	Unplug the AC power adapter from the massager and plug it back in.
The massager won't connect to my phone.	Make sure your phone has Bluetooth turned on and is within 32 ft/ 9.75 m of the massager.
The massager won't connect to my phone.	Make sure your massager isn't connected to any other phones. Bluetooth devices can only connect to 1 phone at a time.
The massager is turned on, but the massage functions stopped working.	If you have been using the massager for a long time, overheat protection may have activat ed. Turn the massager off and allow it to cool for at least 40 minut es.
The massage intensity is too strong or too weak.	Change the mode and intensity settings of the massager to match your preferences.
An unknown error occurred. Turn off the massager and turn it back on again. I Unplug the AC power adapter from the massager and plug it back in.
The massager is making an unusual noise, emitting a strange smell, or smoke is coming from it.	Turn off and stop using the massager immediately. Contact Customer Support (see page 24).

Etekcity Smart Shiatsu Foot Massager EM-SF3 Pros & Cons

Pros:
- Advanced shiatsu techniques for deep tissue massage
- Adjustable intensity levels and heating function
- Compact and portable design
- Built-in timer for added convenience
Cons:
- May be too intense for some users
- Price point may be high for some potential buyers

Customer Reviews

Customers have praised the Etekcity Smart Shiatsu Foot Massager EM-SF3 for its deep tissue massage and adjustable intensity levels. Many have also noted that the heating function provides additional relief for sore muscles. However, some have noted that the massager may be too intense for some users, and that the price point may be high for some potential buyers.

Search Manuals in: smart-shiatsu

Read More