Introduction of Coleman SaluSpa Hot Tub Spa 90363E

The Coleman SaluSpa Hot Tub Spa is a popular choice for those seeking a relaxing and rejuvenating hydrotherapy experience in the comfort of their own home. This inflatable hot tub spa boasts a sleek and modern design, along with a range of features that make it an attractive option for many buyers. With an estimated price range of $400 to $600 and a launching date of 2018, the SaluSpa Hot Tub Spa 90363E is an affordable and convenient way to enjoy the benefits of a hot tub spa.

Detailed Specifications

The SaluSpa Hot Tub Spa 90363E has a capacity of 4-6 people, with a water capacity of 254 gallons. It features a digital control panel that allows you to adjust the water temperature (up to 104°F) and the number of air jets (120). The hot tub spa measures 71" x 26" and has a cushioned air mat floor for added comfort. The exterior is made of a durable Tritech material that is designed to withstand the elements, while the interior is lined with a tri-layer polyester mesh material for added durability.

PRE-SETUP CHECKLIST

PARTS CHECKS
Please examine the equipment before use. Notify Bestway® customer service of any damaged or missing parts at the time of purchase. Verify that the equipment components represent the model that you had intended to purchase. For reference please use the diagrams below.
COLEMAN AIRJET S100105 (90363) — 77" x 28" / 1.96 m x 71 cm

Description of SaluSpa Hot Tub Spa

The Coleman SaluSpa Hot Tub Spa 90363E is a plug-and-play hot tub spa that is easy to set up and use. Simply inflate the hot tub spa using the included pump, fill it with water, and plug it into a standard electrical outlet. The digital control panel allows you to customize your hot tub spa experience, with options for adjusting the water temperature, number of air jets, and more. The hot tub spa also features a built-in heater that maintains the water temperature, as well as a cover that helps to retain heat and keep debris out of the water.

Setup of Coleman SaluSpa Hot Tub Spa

To set up the SaluSpa Hot Tub Spa 90363E, follow these steps

Find a flat and stable surface that is at least 5 feet away from any obstructions or overhanging branches.
Unpack the hot tub spa and lay it out on the chosen surface.
Connect the pump to the hot tub spa and inflate it to the recommended pressure.
Fill the hot tub spa with water using a garden hose.
Plug the hot tub spa into a standard electrical outlet and use the digital control panel to adjust the settings as desired.
Replace the cover when not in use to retain heat and keep debris out of the water.

INSTALLATION

It is important to follow these suggestions if you are setting up the spa during the winter period. This will prevent damage to the PVC material and extend the life of your product drastically.

If the ambient temperature is below 50°F(10°C), we suggest keeping the package indoor where the temperature is above 59°F(15°C) for at least 2h before inflation. This will make the spa liner more flexible and easier to set up.
Open the package in the same room where the temperature is above 59°F(15°C), and inflate the spa using the spa heater.
Position the spa liner outdoor in the desired position, connect the spa heater and fill with water.

Important: The water temperature used to fill the spa must be above 42.8°F(6°C), otherwise when you begin to operate with the spa heater, the E03 alarm will appear.
Important: If the Freeze Shield™ system isn’t working, alarms will pop up on the spa. Be sure to check the status of your spa if the outdoor temperature is below 42.8°F(6°C). In case of a long-term absence from home when there is a risk of temperatures falling below 42.8°F(6°C), we strongly suggest disassembling the spa and storing it following the storage procedure. When you assemble the spa, the automatic warm function will turn on. In this condition, the spa can be used when the temperature is lower than 42.8°F(6°C).

GFCI Test

IMPORTANT: RISK OF ELECTRIC SHOCK. THE GFCI MUST BE TESTED BEFORE TURNING ON THE PUMP EACH TIME.

Plug the GFCI into a power outlet, the indicator turns red.
Press the test button, the indicator turns off.
Press the reset button, the indicator turns red and the spa is ready for use.

WARNING

The GFCI plug must be tested before each use to avoid risk of electric shock.
Before inserting plug into a power outlet, make sure the current rate of the power outlet is suitable for the pump.
Do not use the pump if this test fails.
Using an extension lead or multi-plug adaptor with the spa heater can cause the plug to overheat, causing damage to the equipment and surrounding items. The spa is a class I electrical appliance and must be connected directly to a grounded socket. It is recommended to only use a socket which is resistant to humidity and capable of high power loading. Regularly check the plug and socket for signs of damage before using the spa – do not use the spa if the plug or socket is damaged. If you are unsure about the quality of the electrical supply, please consult a qualified electrician before use.

NOTE

When inflating, you will notice that air will be expelled from the area where the air hose connects to the pump, this is normal for technique requirements.
Do not use an air compressor to inflate the pool.
Do not drag the pool on rough ground as this may cause damage to the pool liner.
Inflation time for reference only.

When inflating, you will notice that air will be expelled from the area where the air hose connects to the pump, this is normal for technique requirements.
Important: Don't cover the holes on the base of the inflation hose. This operation will over-inflate the liner and damage the structure.

Do not use an air compressor to inflate the pool.
Do not drag the pool on rough ground as this may cause damage to the pool liner. Inflation time for reference only.

USING THE SPA

Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body temperature of 98.6°F(37°C). The symptoms of hyperthermia include an increase in the internal temperature of the body, dizziness, lethargy, drowsiness, and fainting. The effects of hyperthermia include failure to perceive heat, failure to recognize the need to exit spa or hot tub, unawareness of impending hazards, fetal damage in pregnant women, physical inability to exit the spa or hot tub, and unconsciousness resulting in the danger of drowning.
WARNING

WATER TEMPERATURE IN EXCESS OF 100°F(38°C) CAN BE INJURIOUS TO YOUR HEALTH.
The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia.

LOCK/UNLOCK BUTTON: The pump has a 5-minute auto-lock, this light will turn on. To lock or unlock the pump, place a finger over the lock/unlock button for 3 seconds.
POWER-SAVING TIMER BUTTON: Designed to help avoid wasting power by setting the time and duration of the heating cycle for the spa. This way, you can enjoy your spa at the time you desire, without needing to leave the heater on at all times.
1. Set the heating duration
  1. Press the button unit the LED starts to flash.
  2. Press the or button to adjust the heating duration (From 1-999 hours).
  3. Press the button again to confirm the heating duration.
2. Set the number of hours FROM NOW when the heater will activate
  1. Press the or button to adjust the hours until time of activation (From 0-999 hours).
  2. Press button again or simply touch nothing for 10 seconds to confirm the setting.
  3. The LED will light steadily, and the countdown to heater activation will begin.
    To modify the timer settings: Press the button and use the or button to adjust. Cancel the setting: Press the button for 2 seconds.
    NOTE: After setting, the screen flashes the current temperature and time alternately.
    NOTE: Timer adjustment (amount of time with the heater ON) may be set from 1 to 999 hours; Reservation time adjustment (the number of hours FROM NOW when the heater will begin to function) may be set from 0 to 999 hours. If the timer is set at 0 hours, the heating system will activate immediately.
    Note that the timer is one time per use - the user sets the duration of the heating cycle, and how many hours from now the heating cycle begins. The timer does NOT repeat until reset.
HEAT BUTTON: Use this button to activate the heating system. When the light above the heat button is red, the heating system is activated. When the light is green, the water is at the set temperature and the heating system is at rest.|
- NOTE: If the heating system is activated the filtration system will automatically start.
- NOTE: After turning off the heating system the filtration system will continue to operate.
- NOTE: If the spa heater is on when the water temperature is below 42.8°F(6ºC), the heating system will warm the water until 50°F(10ºC) automatically.
MASSAGE SYSTEM BUTTON: Use this button to activate the massage system, which has a 30-minute auto-shutoff feature. The light above the Massage System Button displays red when activated. IMPORTANT: Do not run the Massage system when the cover is attached. Air can accumulate inside the spa and cause irreparable damage to the cover and bodily harm.
NOTE: Heat and massage system work together to create a warm massage experience.
TEMPERATURE ADJUSTMENT BUTTONS: Pressing the Temperature Increase or Decrease buttons will cause the LED to flash. When it is flashing you can adjust to the desired temperature setting. If you hold these buttons down the values will rapidly increase or decrease. The new and desired temperature setting will remain on the LED display for 3 seconds to confirm the new value.
NOTE: The default temperature is 95°F(35°C).
NOTE: Temperature adjustment ranges from 68°F(20°C) to 104°F(40°C).
ON/OFF BUTTON: Press this button for 2 seconds to active the control panel buttons and the light turns to green. Press this button for 2 seconds to turn off all currently activated functions.
CELSIUS/FAHRENHEIT TOGGLE: The temperature can be displayed in either Fahrenheit or Celsius.
WATER FILTER BUTTON: This button turns the filter pump on and off. The light above the Water Filter Button displays red when activated.

POWER-SAVING TIMER LED:

This flashing LED means you are setting the heating duration. The light will be on when the heating function starts to work.
This flashing LED means you are setting the number of hours FROM NOW when the heater will activate. When the light is on, the Power-Saving Timer function is set.

NOTE: The WATER HEATER rate may change in the conditions below

When the outdoor temperature is below 59°F(15°C).
If the cover is not in position when the heating function is activated.

NOTE: To display the current water temperature, run the filter system for at least a minute.
The water temperature as tested by an external thermometer may vary from the temperature as displayed on the spa panel by as much as approximately 35.6°F(2°C).

WINTER USE INSTRUCTIONS

You can keep the spa on during winter when the temperature is lower than
42.8°F(6°C). The Freeze Shield™ system automatically keeps the water temperature between 42.8°F(6°C) and 50°F(10°C), and it will prevent the water from freezing. Important: If the water temperature is below 42.8°F(6°C), the spa heater must always be on. In this mode, the Freeze Shield™ system can keep the internal temperature between 42.8°F(6°C) and 50°F(10°C) to prevent damage, such as water freezing in the pipes or the circulation system.
Important: If the Freeze Shield™ system isn’t working, alarms will pop up on the spa. Be sure to check the status of your spa if the outdoor temperature is below
42.8°F(6°C). In case of a long-term absence from home when there is a risk of temperatures falling below 42.8°F(6°C), we strongly suggest disassembling the spa and storing it following the storage procedure.
Any damage as a result of using the spa in these conditions is the responsibility of the customer. Do not use the spa when the ambient temperature reaches 14°F(-10°C).

IMPORTANT
To reach 104°F(40°C), the heating duration required is based on the starting water temperature and ambient temperature, the data below is purely for reference. To display the current water temperature, run the filter system for at least a minute.

Ambient Temperature	Water Temperature	Set Temperature	Heating Duration
50°F (10°C)	50°F (10°C)	104°F (40°C)	32 h
59°F (15°C)	59°F (15°C)	104°F (40°C)	26 h
68°F (20°C)	68°F (20°C)	104°F (40°C)	20 h
77°F (25°C)	77°F (25°C)	104°F (40°C)	14 h
86°F (30°C)	86°F (30°C)	104°F (40°C)	9 h

Be sure to cover the spa with the spa cover whenever the heating function is activated. Leaving the spa uncovered will increase the heating duration required.
When the spa is assembled with water, do not switch off the spa heater if the temperature is lower than 42.8°F(6ºC).

Power Rate	Massage Tube Blower	Heat Element	Water Pump
110-120V AC, 60Hz, Single Phase	6.5 A	11.3 A at 20°C	0.7 A

MAINTENANCE

CAUTION: You must ensure the pump is unplugged before beginning spa maintenance to avoid risk of injury or death.
Adding Air: Your spa will require additional air to be added from time to time. Changes in temperature from day to night will change the pressure in the spa and may cause a certain amount of deflation. Please follow the assembly instructions and inflate to the accurate pressure needed.
When you need to use the pump for inflation, please block the hoses to prevent water from escaping, then disconnect the pump, screw on the cap (P00217) to avoid water coming out from the air pipe.

Cover Maintenance
The cover shall be cleaned inside and out periodically using a suitable solution that includes adequate disinfection (e.g. 10 mg/l of Free Chlorine).
Filter Cartridge Maintenance
To ensure your spa water stays clean, check and clean your filter cartridges every day follow the steps below.
NOTE: We recommend changing your filter cartridges every week or, if the filter cartridges remain soiled and discolored, they should be replaced.

Water Maintenance
Many pollutants in the water settle on surfaces below the water line. These pollutants can cause bacterial, algal or fungal growth. It is recommended that spas are cleaned as regularly as necessary. After a time, tenacious stains or biofilms may develop on the accessible surfaces below the water line or high concentrations of salts or unwanted reaction by-products may also occur. Depending on hygienic condition, cleanliness, visibility, odour, debris and stains, it is recommended to change the water completely and clean/disinfect the spa. When emptying the spa, the regulations and the instructions for draining the water shall be observed. Keeping your spa water clean and chemically balanced is necessary. Simply cleaning the filter cartridge is not enough for proper maintenance, we recommend you use pool chemicals to maintain water chemistry and chlorine or bromine tablets (do not use granules) with the chemical dispenser. Water quality will be directly related to frequency of use, number of users and overall maintenance of the spa. The water should be changed every
3 days if there is no chemical treatment being performed with the water.
It is highly recommended to use tap water for spa filling to minimize the influence of unwanted content, such as minerals. Barefoot areas and relaxing areas shall be cleaned as well. No cleaning water may flow into the spa or spa water cycle. The dirt and cleaning agents shall be rinsed carefully to drain in the spa surround.
Note: We recommend you take a shower before using your SaluSpa, as cosmetic products, lotions, and other residues on the skin can quickly degrade water quality.To use the chemical dispenser, please follow the below instructions.
Using chemical tablets (not included)

coleman_saluspa_hot_tub_spa_90363e-filter_cartridge_maintenance.png

Important: Don't use granulate tablet or throw the tablet directly in the water, the chemical will deposit on the bottom and damage the material and discolored the PVC.
Using chemical liquid (not included)

coleman_saluspa_hot_tub_spa_-90363e-using_chemical_liquid.png

Important: Add chemical liquid in small doses and in the center of the pool avoid directly contact of the chemical with the spa surface, the direct contact of chemical with spa material will damage the material and discolored the surface.
NOTE: Remove the chemical dispenser from spa when the spa is in use. IMPORTANT: After performing chemical maintenance and before using the spa, use a test kit (not included) to test the water chemistry. We recommend maintaining your water as below table.

NOTE: Damage resulting from chemical imbalance is not covered by the warranty. Pool chemicals are potentially toxic and should be handled with care. There are serious health risks from chemical vapors and the incorrect labeling and storage of chemical containers. Please consult your local pool supply retailer for more information about chemical maintenance. Pay close attention to the chemical manufacturer’s instructions. spa damage resulting from misuse of chemicals and mismanagement of spa water is not covered by the warranty.
Important: Over usage of chemical will discolor the printing and all points of the spa material, in worse case damage the structure of the spa liner.

pH	Total Alkalinity	Free Chlorine
7.4-7.6	80-120 ppm	2-4 ppm

DISASSEMBLY AND STORAGE

DRAINING THE SPA

Make sure the spa and pump are completely dry. This is essential to extend the life of the spa. We recommend using the pump to blow dry the spa, pump and pipes. Remove the filter sets and discard the used filter cartridges. Re-attach the two stopper caps onto the spa’s inlet and outlet valves. It is recommended you store the spa in its original package in a warm [above 59°F(15°C)] and dry place.

CLEANING THE SPA

Detergent residues and dissolved solids from bathing suits and chemicals may build up on the spa walls. Use soap and water to clean the walls and rinse thoroughly. NOTE: DO NOT use hard brushes or abrasive cleaners.
DEFLATION
Your spa is equipped with a deflation function to remove all the air from inside the chamber to make it easier to pack and store.

ERROR CODES

TROUBLESHOOTING

Problems	Probable Causes	Solutions
Pump does not operate	Power failure	Check power source
	Improper installation
Pump does not heat properly	Temperature set too low	Set a higher temperature.
	Dirty Filter Cartridge	Refer to the filter cartridge refer to section pump operation
	The Email not cut out	Clean/replace the filter cartridge refer to section cartridge cleaning and replacem
	Heating element failed or fuse cutout	Change the pump and plug the in a dry, cool place. Only operate the pump when the water temperature reaches 95°F(35°C) or lower.
		Attach the pump.
Massage System does not work	Air Pump is overheating	Unplug the pump and wait two hours until the pump has cooled. Insert the plug and press the massage button button
	The massage system stops automatically	Press the massage system button to restart
	Air pump is broken
Pump adapters are not level with the spa adapters	One characteristic of PVC is that is changes shape, which is normal	Elevate the pump with wood or another type of insulated material to bring the pump's adapters level with the spa's adapters
Spa pool leakage	Spa is torn or punctured	Use the provided repair patch with the spa's adapters
	Air valve is loose	If using sealant, wait for the adhesive to dry before inflating. If leaking, inflate only the bottom chamber of the air-valve following the steps: 1. Untie the rope. 2. Deflate the pool, hold the back of the air-valve from the inner side of the spa wall and turn the wrench clockwise.
Water is not clean	Insufficient filtering time	Increase the filtration time
	Dirty Filter Cartridge	Replace the Filter Cartridge (refer to Filter Cartridge Cleaning and Replacement section)
	Improper cleaning maintenance	Clean the spa thoroughly
Control panel not working	The control panel has an auto-lock, which is activated after 5 minutes of inactivity. The LED displays this on the control panel is highlighted.	To unlock the control panel, press the button for 3 seconds.
	Control panel is not activated.	If the control panel will not unlock, restart the pump – unplug and plug in the pump.
GFCI test failed
What kind of chemicals should be used for water maintenance?	Please consult your local chemical supplier for information about chemical maintenance.	For assistance, please visit the chemical manufacturer's instructions.
Water leaks from the adapters between the pump and spa	Seals are missing inside the pump adapter	Insert the stoppers on the pump posts to prevent the water from escaping and reinsert the pump cap. Check if the seals are in place.
	Seals are not in correct position	If the seals are displaced, they must be replaced.
	Seals are damaged	If the seals are in correct position, the adapters are not tightened correctly. Connect the pump to the spa, hand-tighten the adapters, and remove the stopper caps from the spa. If there is leakage, tighten the adapter until there is no leakage.
	Adapters are not tightened correctly

Pros & Cons of Coleman 90363E

Pros

Affordable price range
Easy to set up and use
Customizable settings with digital control panel
Durable and weather-resistant exterior material
Cushioned air mat floor for added comfort

Cons

May not retain heat as well as hard-shell hot tub spas
Limited warranty and customer support
May take some time to heat up the water initially
Limited space for more than 4-6 people
May require frequent cleaning and maintenance

Customer Reviews of Coleman SaluSpa Hot Tub Spa 90363E

Customers have generally praised the SaluSpa Hot Tub Spa for its affordability, ease of use, and customizable settings. However, some have noted that it may not retain heat as well as hard-shell hot tub spas, and that the warranty and customer support are somewhat limited. Additionally, some users have reported that the hot tub spa may require frequent cleaning and maintenance to keep the water clean and clear.

Search Manuals in: spa

Read More