Casio DB-360 Watch 2515: A Comprehensive Review

Introduction of Casio DB-360 Watch

The Casio DB-360 Watch 2515 is a versatile and feature-rich timepiece that is perfect for both casual and formal settings. This watch boasts a sleek and stylish design, with a round stainless steel case and a comfortable black resin band. The watch is also water-resistant up to 100 meters, making it suitable for swimming and snorkeling. With an estimated price range of $50 to $70, this watch offers excellent value for money. Although the official launching date has not been announced yet, it is expected to hit the market soon.

Detailed Specifications

The Casio DB-360 Watch comes with a range of features that make it a standout timepiece. Here are some of its key specifications:

Round stainless steel case with a diameter of 46.2mm and a thickness of 11.8mm
Black resin band with a buckle closure
Mineral glass dial window
Digital display with afterglow
Water-resistant up to 100 meters
World time function with 31 time zones 5 daily alarms
Stopwatch and countdown timer
Full auto-calendar
12/24-hour format
Battery life of approximately 3 years

Description

The Casio DB-360 Watch is a reliable and functional timepiece that is perfect for everyday wear. Its digital display is easy to read, and the afterglow feature ensures that you can tell the time even in low light conditions. The world time function is especially useful for frequent travelers, as it allows you to keep track of time in different parts of the world. The daily alarms are also a great feature for those who need reminders throughout the day. The stopwatch and countdown timer are perfect for athletes and fitness enthusiasts, while the full auto-calendar ensures that you always have the correct date.

Setup Guide

Setting up the Casio DB-360 Watch 2515 is straightforward and easy. Here are the steps to follow

tart by unfastening the buckle and pulling the band out to fit your wrist.
Press the button at the 2 o'clock position to illuminate the display.
Press the button at the 3 o'clock position to cycle through the different modes (time, world time, alarm, stopwatch, countdown timer, and calendar).
Once you have selected the desired mode, press the button at the 4 o'clock position to adjust the settings.
Press the button at the 2 o'clock position to toggle between hours, minutes, and seconds (in the time mode) or between different options (in the other modes).
Press the button at the 4 o'clock position to set the desired value.
Once you have finished setting up the watch, press the button at the 3 o'clock position to exit the mode.

General Guide

Press ® to change from mode to mode.
In any mode, press ® to illuminate the display.

Timekeeping

Use the Timekeeping Mode to set the time and date. You can also view the Dual Time Mode screen or Data Bank Mode screen from the Timekeeping Mode.
Note: This watch is capable of displaying text for the day of the week in any one of 13 different languages (English, Portuguese, Spanish, French, Dutch, Danish, German, Italian, Swedish, Polish, Romanian, Turkish, and Russian).
To set the time and date

When the setting you want to change is flashing, use E and D to change it as described below.

To change this setting	Perform this button operation
Seconds	Press E to reset to 00.
Year, Month, Day, Hour, Minutes	Use E (+) and D (−) to change the setting.
Language	Use E and D to change the language setting.

In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen.
Use C and B to move the flashing in the sequence shown below to select other settings.
The currently selected language indicator flashes on the display while the Language (setting) is selected in the above sequence.
While the language indicator is flashing on the display, use E and D to cycle through the language indicators as shown below, until the one for the language you want to select is displayed.
Press A to exit the setting screen.
- The day of the week is automatically displayed in accordance with the date (year, month, and day) settings.
- See the "Day of the Week List" for information on abbreviations used.
- In addition to the day of the week display, the language setting also affects the type of characters you can input for the name in the Data Bank Mode.
- Holding down A in the Timekeeping Mode displays the indicator for the currently selected language. Keeping A depressed for one or two seconds changes to the

Timekeeping Mode setting screen (indicated by the seconds flashing). If you accidentally display the setting screen, press A again to exit.

To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press C to toggle between 12-hour timekeeping (indicated by for on the display), or 24-hour timekeeping.

With the 12-hour format, the P (PM) indicator appears on the display for times in the range of noon to 11:59 p.m. and the R (AM) indicator appears for times in the range
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all modes.

Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
Holding down © for about two seconds in the Timekeeping Mode toggles between Daylight Saving Time (DST display) and Standard Time (DST not displayed).

Note that pressing © in the Timekeeping Mode also toggles between 12-hour timekeeping and 24-hour timekeeping.
The DST indicator appears on the display to indicate that daylight saving time is turned on.

To display the Data Bank screen and Dual Time screen in the Timekeeping Mode
Holding down D in the Timekeeping Mode displays the Dual Time screen. Holding down E displays the record you were viewing when you last used the Data Bank Mode.

Data Bank

The Data Bank Mode lets you store up to 30 records, each containing name and telephone number data. Records are automatically sorted based on the characters of the name. You can recall records by scrolling through them on the display.

The characters you can input for the name depend on the language you select in the Timekeeping Mode. See "To set the time and date" for more information. Changing the language setting does not affect names that are already stored.
See "Sort Table" for details on how the watch sorts records.
All of the operations in this section are performed in the Data Bank Mode, which you enter by pressing B.

To create a new Nate Rank record

In the Data Bank Mode, press C to display the new data screen.
If the new data screen does not appear when you press C, it means that memory is full. To store another record, you will first have to delete some of the records stored in memory.
Hold down A until the flashing cursor (--) appears in the name area of the display.
In the name area, use € and D to cycle through characters at the cursor position. The characters cycle in the sequence shown below.
The above character sequence is for English input. See "Character List" for the character sequences of other languages.
When the character you want is at the cursor position, press C to move the cursor to the right.
Repeat steps 3 and 4 until the name is complete.
You can input up to eight characters for the name.
After you input the name, press © as many times as necessary to move the cursor to the number area.
- When the cursor is located at the eighth space of the name area, moving the cursor to the right causes it to jump to the first digit of the number. When the cursor is at the 15th digit of the number, moving it to the right (by pressing C)) causes it to jump to the first character in the name.
- Pressing C moves the cursor the right, while B) moves it to the left.
In the number area, use € and D to cycle through numbers and symbols (hyphen, brackets, space) at the cursor position. The characters cycle in the sequence shown below.
When the character you want is at the cursor position, press © to move the cursor to the right.
Repeat steps 7 and 8 until you complete the number input.
• You can input up to 15 digits for the number.
• The number initially contains all hyphens. You can leave the hyphens as they are or replace them with numbers or other symbols (brackets, space).
Press A to store your data and return to the Data Bank record screen (without the cursor).
- When you press A to store data, the name and number you input flash for about one second as Data Bank records are sorted. After the sort operation is complete,
  the Data Bank record screen appears.
- The name can show only three characters at a time, so longer text scrolls continuously from right to left. The last character is indicated by the symbol after it.

To recall Data Bank records
In the Data Bank Mode, use E (+) and D (-) to scroll through Data Bank records on the display.
Pressing E while the last Data Bank record is on the display or D while the first record is on the display displays the new data screen.

To edit a Data Bank record

In the Data Bank Mode, use E (+) and D (-) to scroll through the records and display the one you want to edit.
Hold down A until the flashing cursor appears on the display.
Use C (right) and B (left) to move the flashing to the character you want to change.
Use E (forward) and D (back) to change the character.
After making the changes that you want, press A to store them and return to the

To delete a Data Bank record

In the Data Bank Mode, use E (+) and D (-) to scroll through the records and display the one you want to delete.
Hold down A until the flashing cursor appears on the display.
Press B and C at the same time to delete the record.
The message CLR appears to indicate that the record is being deleted. After the record is deleted, the cursor appears on the display, ready for input.
Input data or press A to return to the Data Bank record screen.

Alarm

You can set up to five independent multi-function alarms with hour, minutes, month, and day. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. You can select either a one-time alarm or snooze alarm that repeats up to seven times, every five minutes. You can also turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour.

There are five alarms numbered | through S. You can configure Alarm 1 as a snooze alarm or a one-time- alarm. Alarms 2 through 5 can be used as one-time alarms only.
Alarm settings (and Hourly Time Signal settings) are available in the Alarm Mode, which you enter by pressing B.

Alarm Types

The alarm type is determined by the settings you make, as described below.

Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set.
Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes the alarm to sound at the specific time, on the specific date you set.
1-Month alarm Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at the time you set, only during the month you set.
Monthly alarm
Set the day, hour and minutes for the alarm time. This type of setting causes the alarm to sound every month at the time you set, on the day you set.

To set an alarm time

In the Alarm Mode, use E and D to scroll through the alarm screens until the one whose time you want to set is displayed.
Each of the five alarm screens has an alarm number. The hourly time signal screen does not have an alarm number.
After you select an alarm, hold down A until the hour setting of the alarm time starts to flash, which indicates the setting screen.
This operation automatically turns on the alarm.
Use C and B to move the flashing in the sequence shown below to select other settings.
While a setting is flashing, use E (+) and D (-) to change it.
- To set an alarm that does not include a month (Daily alarm, Monthly alarm), set - for the month. Use E and D until the - mark appears (between 12 and 1) while month setting is flashing.
- To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set - -for the day. Use E and D until the - - mark appears (between the end of the month and 1) while the day setting is flashing.
- When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (R indicator) or p.m. (P indicator).
Press A to exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm repeats up to seven times every five minutes until you turn the alarm off or change it to a one-time alarm.

Pressing any button stops the alarm tone operation.
Any time you display the setting screen while the Alarm ; screen is on the display, Alarm | automatically becomes a one-time alarm.
Displaying the Timekeeping Mode setting screen during a 5-minute interval between snooze alarms stops the current snooze alarm operation (but snooze alarm remains as the alarm typesetting).

To test the alarm
In the Alarm Mode, hold down © to sound the alarm.

To turn Alarms 2 through 5 and the hourly time signal on and off

In the Alarm Mode, use E and D to select a one-time alarm (alarm number 2 through S) or the Hourly Time Signal.
Press C to toggle it on and off.
- The on/off status of Alarms & through 5 is shown by indicators along the bottom of the displays ( = on). The SIG indicator shows the on (displayed)/off (not displayed) status of the hourly time signal.
- The alarm on indicators and hourly time signal indicator are displayed in all modes.
- While an alarm is sounding, the applicable alarm on indicator flashes on the display.

To select the operation of Alarm /

In the Alarm Mode, use E and D to select Alarm i.
Press C to cycle through the available settings in the sequence shown below.
- The SNZ indicator and Alarm / on indicator are displayed in all modes.
- The SNZ indicator flashes during the 5-minute intervals between alarms.
- The alarm indicator (Alarm ; on and/or SNZ) flashes while the alarm is sounding.

Stopwatch

The stopwatch lets you measure elapsed time, split times and two finishes.

The display range of the stopwatch is 23 hours, 59 minutes, 59.99 seconds.
The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it.
The stopwatch measurement operation continues even if you exit the Stopwatch Mode.
Exiting the Stopwatch Mode while a split time is frozen on the display clears the split time and returns to elapsed time measurement.
All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing B.

To measure times with the stopwatch

Countdown Timer

The countdown timer can be set within a range of 1 minute to 24 hours. An alarm sounds when the countdown reaches zero.
Countdown timer functions are available in the Countdown Timer Mode, which you enter by pressing B.

To set the countdown start time

In the Countdown Timer Mode, hold down * until the hour setting of the countdown start time starts to flash, which indicates the setting screen.
Press B or C to move the flashing between the hour and minute settings.
While a setting is flashing, use E (+) and D (-) to change it.
To set the starting value of the countdown time to 24 hours, set 0:00
Press A to exit the setting screen.

To use the countdown timer
Press C while in the Countdown Timer Mode to start the countdown timer.

When the end of the countdown is reached, the alarm sounds for 10 seconds or until you stop it by pressing any button. The countdown time is automatically reset to its starting value after the alarm stops.
Press C while a countdown operation is in progress to pause it. Press C again to resume the countdown.
To completely stop a countdown operation, first pause it (by pressing C), and then press (A). This returns the countdown time to its starting value.
The countdown timer measurement operation continues even if you exit the Countdown Timer Mode.

Dual Time

The Dual Time Mode lets you keep track of time in a different time zone. You can select Standard Time or Daylight Saving Time for the Dual Time Mode time, and a simple operation lets you view the Timekeeping Mode screen or Data Bank Mode screen.

The seconds count of the Dual Time is synchronized with the seconds count of the Timekeeping Mode.
All of the operations in this section are performed in the Dual Time Mode, which you enter by pressing B.

To set the Dual Time

In the Dual Time Mode, hold down A until the hour setting start to flash, which indicates the setting screen.
Press B or C to move the flashing between the hour and minute settings.
While a setting is flashing, use E (+) and D (-) to change it.
Press A to exit the setting screen.

|To toggle Dual Time Mode time between DST and Standard Time
Holding down C for about two seconds in the Dual Time Mode toggles between
Daylight Saving Time (DST display) and Standard Time (DST not displayed).
The DST indicator on the display indicates that daylight saving time is turned on.
To display the Timekeeping screen and Data Bank screen
Holding down D in the Dual Time Mode displays the Timekeeping screen. Holding down E displays the record you were viewing when you last used the Data Bank Mode.

Reference

This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch.

Auto Return Features

After you perform any button operation (except for the backlight button) in any mode, pressing B returns directly to the Timekeeping Mode
If you leave the watch in the Data Bank Mode for two or three minutes without performing any operation, it automatically changes to the Timekeeping Mode.
If you leave a screen with flashing digits or a cursor on the display for two or three minutes without performing any operation, the watch automatically saves any settings you have made up to that point and exits the setting screen.

Data and Setting Scrolling
The B, C, D, and E buttons are used in various modes and setting screens to scroll through data on the display. In most cases, holding down these buttons during a
scroll operation scrolls through the data at high speed.
Initial Screens
When you enter the Data Bank or Alarm Mode, the data you were viewing when you last exited the mode appears first.

Timekeeping

Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to 00 without changing the minutes.
The year can be set in the range of 2000 to 2039.
The watch's built-in full automatic calendar automatically makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch's battery replaced.
Backlight Precautions
The backlight uses an LED (light-emitting diode) and a light guide panel that causes the entire display to glow for easy reading in the dark. In any mode, press L to illuminate the display for about one second.
The illumination provided by the backlight may be hard to see when viewed under direct sunlight.
The backlight automatically turns off whenever an alarm sounds.
Frequent use of the backlight shortens the battery life.

Day of the Week List

Language	Sunday	Monday	Tuesday	Wednesday	Thursday	Friday	Saturday
ENG	SUN	MON	TUE	WED	THU	FRI	SAT
POR	DOM	SEG	TER	QUA	QUI	SEX	SAB
ESP	DOM	LUN	MAR	MIE	JUE	VIE	SAB
FRA	DIM	LUN	MAR	MER	JEU	VEN	SAM
MED	ZON	MAN	DIN	WOE	DON	VRI	ZAT
DAN	SON	MAN	TIR	ONS	TOR	FRE	LOR
DEU	SON	MON	DIE	MIT	DON	FRE	SAM
ITA	DOM	LUN	MAR	MER	GIO	VEN	SAB
SVE	SON	MAN	TIS	ONS	TOR	FRE	LOR
POL	NIE	PON	WTO	SRO	CZW	PIA	SOB
ROM	DUM	LUN	MAR	MIE	JOI	VIN	SAM
TUR	PAZ	PTI	SAL	ÇAR	PER	CUM	CTS
РУС	ВС	ПН	ВТ	СР	ЧТ	ПТ	СБ

Character List

Sort Table

Troubleshooting

If you encounter any issues with your Casio DB-360 Watch 2515, here are some common problems and solutions to help you out:

If the watch is not keeping accurate time, make sure that the battery is not running low and that the watch is not exposed to strong magnetic fields.
If the digital display is hard to read, try adjusting the brightness by pressing the button at the 2 o'clock position.
If the watch is not water-resistant, make sure that the crown is fully pushed in and that there are no cracks or damages to the case or band.

Pros & Cons

Pros
- Sleek and stylish design
- Easy-to-read digital display
- World time function
- Daily alarms
- Stopwatch and countdown timer
- Full auto-calendar
- Water-resistant up to 100 meters
- Long battery life
- Affordable price range
Cons
- Digital display may be hard to read in bright sunlight
- May be too large for some wrists
- Band may feel uncomfortable for some users

Search Manuals in: specs-and-features

Read More

Read More

Read More