Evenflo Big Kid Sport No-back Booster Seat Introduction

The Evenflo Big Kid Sport No-back Booster Seat is specifically designed for children aged four and older, weighing between 40 to 100 pounds. This booster seat elevates your child for a proper seat belt fit, ensuring enhanced safety during car rides. Its lightweight, portable design makes it easy to transfer between vehicles, while the built-in cup holders provide convenience for snacks and drinks. The cost of this booster seat is approximately $30.00.

Child Requirements

18 to 45.3 kg (40 to 100 lbs.)
112 to 145 cm (44 to 57 in.)

At least 4 years old

Detailed Specifications

The Evenflo Big Kid Sport No-back Booster Seat boasts several key features that make it a reliable choice for parents:

Lightweight Design: Easy to move between vehicles.
Comfortable Seating: Padded seat and backrest for enhanced comfort.
Adjustable Headrest: Customizable to fit the child's height.
Machine Washable Pad: Easy to clean and maintain.
Compact Storage: Folds flat for easy storage when not in use.

Visual Glossary

Your vehicle components may be significantly different than pictured. Consult your vehicle Owner’s Manual to help you identify your vehicle components.

IMPORTANT: If your vehicle has side air bags, please refer to the warnings on page 2.

Booster Seat Features

Cup Holder
Seat Pad
Base
Instruction Storage Area
Shoulder Belt Clip

Not all features are available on all models. Styles may vary.

Attaching the Seat Pad

Put the cupholders thru the openings, one at a time.
Pull the seat pad down over the back of the cupholders.
Position seat facing up. Wrap the seat pad around the front of the seat. Make sure the seat pad is straight and positioned correctly on the seat.
Pull the rest of the seat pad down around the back of the seat, and attach the hooks.

When to Put Your Child in a Booster Seat

Booster seats raise the child up and help to position the vehicle lap and shoulder belt correctly. When the child is properly restrained in a booster seat, his/her risk of injury in all types of crashes is reduced, as the lap and shoulder belt provides excellent restraint of both the upper and lower torsos.
It is important for the child to sit properly within the vehicle seat belts. When the vehicle seat belt is buckled, the lap belt should be low on the hips, just touching the thighs, and the shoulder belt should lie across the middle of the shoulder. If the child leans out or moves the belt behind the back or places it under the arm, it will not provide the intended restraint.
There are a number of things to consider when deciding whether the child is ready to sit in a booster seat, including: the weight and height rating on his/her current child seat, the child’s own weight and height, his/her maturity, and the seating positions available in your vehicle.
How is a booster seat used?
Using a booster seat is very similar to buckling yourself into the vehicle:

Read the instruction manuals for both the booster seat and the vehicle before you start.
Put the booster in the back seat in a location with a lap and shoulder belt. Never use a booster with only a lap belt, as this could cause serious injuries.
After the child is in the booster, pull the lap and shoulder belt across him/her and buckle it.
Check that the shoulder belt lies across the middle of the shoulder and that the lap belt is low on the hips, just touching the thighs.

How can you tell if your child is ready to transition to a booster seat?
You should consider using a booster seat if the following conditions apply:

The child is mature enough to sit in the booster seat and not put the belts under their arm or behind their back.
The child is approaching the weight or height limit of the child restraint they are currently using. (Even children who have not outgrown their toddler seat can benefit from the use of a booster seat, if it is used properly.)
If you have a vehicle that does not have a tether anchorage but has lap/shoulder belts available in the back seat, a booster seat may provide better protection than an internal harness seat without the tether.

when_to_put_your_child_evenflo_big_kid_sport_no-back_booster_seat.png

Description

The Evenflo Big Kid Sport No-back Booster Seat is engineered with safety and comfort in mind. Its ergonomic design ensures that the child is supported correctly, while the adjustable headrest allows for customization to fit the child's growing needs. The seat is made from durable materials and features a machine washable pad, making it easy to keep clean. The compact design allows for easy storage, making it ideal for families who need a booster seat that can be taken on the go.

Using Your Evenflo Big Kid Sport No-back Booster Seat

Child Requirements

Weight: 18 – 45.3 kg (40 – 100 lbs)
Height: 112 – 145 cm (44 – 57 in.) and tops of the child’s ears are at or below the top of the vehicle seat headrest.
Age: At least 4 years old

using_your_booster_seat_evenflo_big_kid_sport_no-back_booster_seat.png

IMPORTANT: Once your child exceeds any of the size requirements above, you MUST discontinue use of this seat. Your child may be ready for use of the vehicle belt system only at this time.

Installation Checklist

Place the booster seat on the vehicle seat.
Set the child in the booster seat. Make sure the child’s back is flat against the vehicle seat,and the child’s bottom is flat against the booster seat.
Secure the child and booster seat to the vehicle seat. Stretch the lap/shoulder belt under the armrests and across the child and fasten the buckle.
Use the shoulder belt clip, if necessary.
If the shoulder belt does not properly lay midway between the child’s shoulder and neck, attach and adjust the belt clip (see Using the Shoulder Belt Clip, see page 16).
WARNING: The shoulder belt MUST NOT cross the child’s neck or fall off the child’s shoulder. If you can not adjust the shoulder belt to properly lay midway between the child’s shoulder and neck, try another seating location or do not use the booster seat.
Check your work.
Make sure the lap belt is stretched low and snug across the child’s hips, beneath the armrests, and fastened into the buckle. The shoulder belt must cross the child midway between his/her shoulder and neck. Note: If the vehicle’s shoulder belt naturally crosses the child’s shoulder, you do not need to use the shoulder belt clip.

IMPORTANT: Always secure the booster seat with the vehicle seat belts when not occupied. An unsecured booster seat can fly into and injure other occupants in the event of a crash.

Using the Shoulder Belt Clip

Note: Use the Shoulder Belt Clip only when necessary to position the belt so it lays across the child’s chest midway between his/her shoulder and neck.

Thread the looped end of the shoulder belt clip belt A through the anchor point on bottom of the booster B.
Thread the shoulder belt clip C through the loop at the end of the belt A and pull until tight.
Place booster B on the vehicle seat and attach the shoulder belt clip C to the vehicle shoulder belt D.
Pull the adjustment strap E until belt clip C is even with the child’s shoulder and the vehicle shoulder belt D lays across the child’s chest midway between his/her shoulder and neck.

using_the_shoulder_belt_clip_evenflo_big_kid_sport_no-back_booster_seat.png

Using the Cup Holder

WARNING

DO NOT use the cup holder to store cans, bottles, or hard containers. Only for use with soft cups.
DO NOT place any cups that contain hot liquids in the cup holder.
DO NOT attach additional padding, toys, or other devices to the booster seat. Items not tested with the booster seat could injure the child.

Replacement Parts

Not available on all models. Styles may vary. You can order replacement parts on-line at https://www.evenflo.com or contact Evenflo. When you contact us, please have the product model number and date of manufacture (found on the bottom of the booster seat).

Setup Guide

Setting up the Evenflo Big Kid Sport No-back Booster Seat is straightforward:

Place the booster seat on the vehicle's seat, ensuring it is centered.
Adjust the headrest to the correct height for your child.
Position the child on the booster seat and secure them using the vehicle's three-point seatbelt.
Ensure the lap belt is across the child's hips and the shoulder belt is across their chest.

Care and Cleaning

Plastic parts may be wiped clean with mild soap and water and dried with a soft cloth. Do not use abrasive cleaners or solvents.
Take care not to damage any labels.
Machine wash the seat pad separately in cold water, delicate cycle. Tumble dry 10 to 15 minutes on low heat.
NEVER use booster seat without the seat pad.

TIP!! To help protect the vehicle upholstery, place a towel beneath and behind the booster seat.

Proper Disposal of this Child Restraint
When this child restraint reaches the expiration date found on the date of manufacture label, Evenflo encourages you to dispose of it properly. Most components of this child restraint are recyclable.

Remove all fabric and padding.
Remove all screws and disassemble the restraint.
Recycle all fabric, padding, plastic, foam and metal parts, if accepted by your local recycling center. Responsibly discard the rest

If your local recycling center won’t accept the padding, you may dispose of it in the landfill.
To prevent injury due to hidden damage, lost instructions, outdated technology, etc., discontinue use of this restraint after the expiration date on the label or if it has been involved in a crash.

CHILD REQUIREMENTS
Warning: Failure to follow these Child Requirements could result in serious injury or death. This booster seat is designed for use by children in booster mode only. To use this booster seat properly, children MUST meet the size and age requirements below. Please review any applicable local, state or provincial laws related to child passenger safety before installing and using this booster seat.

Belt-Positioning Booster

18 to 45.3 kg (40 to 100 lbs)
112 to 145 cm (44 to 57 in.) and tops of the child’s ears are at or below the top of the vehicle seat headrest
At least 4 years old

IMPORTANT: Once your child exceeds any of the size requirements above, you MUST discontinue use of this seat. Your child may be ready for use of the vehicle belt system only at this time.

General Warnings

Failure to follow the Child Requirements for use of this booster seat could result in serious injury or death.
Failure to follow these installation instructions and the instructions and warnings on the product can result in the child striking the vehicle’s interior during a sudden stop or crash. Serious injury or death may result. These instructions and the instructions in your vehicle owner’s manual must be followed carefully. If there is a conflict between the two, the vehicle owner’s manual regarding booster seat installation must be followed.
NEVER leave child unattended.
In addition to the height and weight requirements, your child must be at least four years old to use this booster seat.

Airbag Warnings

DO NOT use this restraint in the front seat of a vehicle equipped with an active air bag. Air bags may cause serious injury or death to children 12 and under. If your vehicle has an air bag, refer to your vehicle owner’s manual for booster seat installation.
If the rear seat of your vehicle is equipped with side air bags, refer to the following information for proper usage. Vehicles built prior to the 2002 model year: DO NOT use this restraint in a vehicle seating position equipped with a side air bag unless authorized by the vehicle manufacturer. Model year 2002 and newer vehicles: Refer to your vehicle owner’s manual before placing this restraint in a seating position equipped with a side air bag.
DO NOT place any objects between the restraint and the side air bag, as an expanding air bag may cause the items to strike your child. The forward-facing rear seat is the safest place for children 12 and under.

Location Warnings

According to statistics, children are safer when properly restrained in a rear seating position than in the front seating position. Children 12 and under should ride in the back seat of the vehicle.
Use this booster seat only on forward facing vehicle seats. DO NOT use this booster seat with vehicle seats which face the rear or side of the vehicle.
Use this booster seat only on vehicle seats with backs that lock into place.
Some booster seats do not fit in all vehicles. If the booster seat cannot be properly installed, DO NOT use the booster seat. Consult your vehicle owner’s manual, try a different seating location, or call Evenflo at 1-800-233-5921 for further assistance.

Booster Seat Position Warnings

DO NOT use this booster seat rear-facing.
When using this booster seat, the headrest on the vehicle seat that the child faces should be put in its lowest position. The vehicle seat back that the child faces must be fully padded and free of any hard objects.

Seat Belt Warnings

DO NOT use this booster seat in a vehicle with door-mounted seat belts.
DO NOT use this booster seat in a vehicle with seat belts that automatically move along the vehicle frame when the door is opened. These seat belts will not hold a booster seat properly.
- Warning! Use only the vehicle’s lap and shoulder belt system when restraining the child in this booster seat.
DO NOT use this booster seat if the child’s ears are above the back of the vehicle seat headrest.
Failure to adjust the seat belts snugly around your child may result in your child striking the vehicle’s interior during a sudden stop or crash. Serious injury or death may occur.
DO NOT use this booster seat if it is damaged or has broken or missing parts.
NEVER use booster seat without the seat pad.

Storing Your Instructions

Troubleshooting

Common issues and their solutions include:

Seatbelt Not Fitting Properly: Ensure the headrest is adjusted correctly and the child is seated properly on the booster.
Booster Seat Not Stable: Check that the booster is centered and flat on the vehicle's seat.
Cleaning Issues: Use a mild detergent to wash the machine washable pad.

Important Instructions and Warnings

Always follow the manufacturer's instructions and ensure the booster seat is used correctly to avoid any risk of injury.

Evenflo Big Kid Sport No-back Booster Seat Warranty

For a period of 90 days from the original purchase of this Product, Evenflo warrants to the original end user (“Purchaser”) this Product (including any accessories) against defects in material or workmanship. Evenflo’s sole obligation under this express limited warranty shall be, at Evenflo’s option, to repair or replace any Product that is determined to be defective by Evenflo and determined to be covered by this warranty.

Pros & Cons

Pros

Affordable: Priced competitively compared to other booster seats.
Lightweight and Portable: Easy to move between vehicles.
Adjustable Headrest: Customizable to fit the child's growing needs.
Comfortable Seating: Padded seat and backrest for enhanced comfort.
Easy to Clean: Machine washable pad.

Cons

No Back Support: May not be suitable for younger children who need additional support.
No Cup Holder: Lacks additional features like cup holders.
Storage Issues: While it folds flat, it may not fit in all storage spaces.

Customer Reviews

Customers have praised the Evenflo Big Kid Sport No-back Booster Seat for its affordability, ease of use, and comfort. Many have noted that it is lightweight and easy to move between vehicles, making it a practical choice for families. However, some users have mentioned that it lacks additional features like cup holders and may not provide enough back support for younger children.

Common complaints include the lack of back support and the absence of cup holders. Despite these, the overall consensus is that it is a reliable and safe booster seat that meets the needs of many families.

Search Manuals in: sport-no-back

Read More