Introduction

To fully benefit from the support that Philips offers, register your product at https://www.philips.com/welcome The Philips Wake-up Light helps you wake up more pleasantly. In the set sunrise simulation time (default is 30 minutes), the light intensity of the lamp gradually increases to the set level and the light color changes from deep morning red to bright daylight. The light gently prepares your body for waking up at the set time. To make waking up an even more pleasant experience, you can use natural wake-up sounds or the FM radio to wake up to.

What’s in the Box

Icon Explanation

Wake-up profile
Wake-up sound
Clock time
Display contrast
Lamp
FM radio
Fall-asleep
Natural sounds
Radio
Dawn duration

Detailed Specifications

The Philips Wake-Up Light Therapy HF3520 comes with the following key features:

Clinically proven light therapy to wake you up naturally
Sunrise simulation of 30 minutes
10 different brightness levels
20 different light intensities
5 different natural wake-up sounds
FM radio
Tap-to-snooze feature
Back-up battery
SmartTouch technology
UV-free and low blue light

Overview

Description

If you have seasonal affective disorder (SAD) or have trouble waking up in the morning, the Philips Wake-Up Light Therapy HF3520 is the ideal remedy. This alarm clock's light therapy function helps to control your circadian rhythm, which enhances your sleep and wakefulness cycles. The steady increase in ambient brightness caused by the sunrise simulation facilitates a more natural wake-up. You can choose from 10 different brightness levels, 20 different light intensities, and 5 different natural wake-up sounds, making this alarm clock customizable to your preferences. It is simple to use thanks to SmartTouch technology, and the tap-to-sleep function allows you to snooze for an extra nine minutes with a single touch.

Navigating Through the Menu

Press the MENU button to enter the menu.
Press the + or – button to select a menu setting.
Press SELECT to confirm.

Note: To exit the menu, either press the MENU button or wait for 30 seconds.

Setup Guide

Setting up the Philips Wake-Up Light Therapy HF3520 is quite straightforward:

Place the alarm clock on a flat surface, close to your bed
Plug in the power cord and turn on the alarm clock
Choose your preferred wake-up sound and adjust the brightness level and light intensity
Set the time and alarm using the SmartTouch buttons
Test the sunrise simulation and adjust the settings as needed

First Use - Placing the Wake-up Light

Place the Wake-up Light 16-20in/40-50cm from your head, for example on a bedside table.

First Use - Setting the Clock Time

You have to set the clock time when you plug in the appliance for the first time and when there has been a power failure.

Setting Your Wake-up Profile

When you set your wake-up profile, you set the wake-up time (steps 1 – 6), the light intensity (steps 7 and 8), and the sound level (steps 9 and 10) you want to wake up to. You can set two different wake-up times, for example, if you want to wake up at a different time on the weekend than on weekdays. The procedure to set the wake-up profile and wake-up sound is the same for both.

Setting Your Wake-up Sound

You can use natural wake-up sounds or the FM radio as a wake-up sound. The Wake-up Light has five built-in natural sounds.

Adjusting the Clock Time

To set the clock time, choose between a 12-hour and a 24-hour clock and then adjust the time.

Setting the Display Contrast

You can adjust the display contrast from level 0 (off) to level 4. We advise you to set the display contrast in a dark bedroom. Choose a contrast level that is optimal for you to see the display at night. The display contrast will increase to a higher level when the Wake-up light measures a lot of light in the bedroom. This happens automatically, so you will always be able to see the display, even when the surroundings are lighter.

Note: If you choose level 0 (display off), you can see the display again by touching it.

Switching the Lamp On/Off

Press the lamp on/off button to switch on the lamp and use it as a bedside lamp. You can adjust the light intensity by pressing the + and – buttons. To switch off the lamp, press the lamp on/off button again.

Switching the FM Radio On/Off

Press the FM on/off button to switch on the FM radio.

Note: To scan radio frequencies automatically, press and hold the menu - or + button for approx. 2 seconds.

Switching the Alarm On/Off

Press alarm 1 or alarm 2 if you want to switch the alarm on or off. The corresponding icon appears on the display when you switch on the alarm. It disappears when you switch off the alarm. When you switch on the alarm, the hour indication starts to flash. If necessary, you can now adjust the alarm time.

Note: If you want to adjust the light level or volume to wake up to, you have to use the menu. See chapter ‘Setting your wake-up profile’.

Snooze

When the alarm sound is played at the set time, you can tap on the front of the Wake-up Light to snooze for a while. The lamp stays on, but the alarm sound stops. After 9 minutes, the alarm sound is automatically played again. Do not hit the Wake-up Light with too much force, as this may cause damage.

Note: The alarm 1 or alarm 2 icon flashes on the display when the alarm is snoozed.

Fall-asleep

To use the fall-asleep function, you need to select a timer.

Press the fall-asleep button to switch on the fall-asleep function. The fall-asleep time flashes on the display for a few seconds.
Press the + or – button to adjust the time (5 to 60 minutes). Press the ‘SELECT’ button to confirm the timer setting.

Note: You can listen to the FM radio during the fall-asleep function. Turn on the radio and select your favorite station. Then press the fall-asleep button to activate the fall-asleep function. The sound of the radio will gradually fade during the set fall-asleep time. If you turn on the radio after activating the fall-asleep function, the sound does not fade when the light dims. The sound will stop when the light goes out. To switch off the fall-asleep function, press the fall-asleep button again. The fall-asleep icon disappears from the display.

Note: If you press the fall-asleep button without setting the time, the lamp goes on and then dims gradually over 30 minutes.

Adjusting the Dawn Duration Time

The dawn duration time is the time in which the light intensity of the lamp gradually increases to the set level before the alarm sound is played. The default dawn duration time is 30 minutes, but you can reduce the dawn duration time to 20 or 25 minutes or increase it to 40 minutes.

Simultaneously press and hold alarm 1 and alarm 2.
The default dawn duration time of 30 minutes appears on the display.
Press the + and – button to adjust the minutes.

Demonstration Mode

If you want a quick demonstration (90 seconds) of the gradually increasing light intensity and sound level, switch on the test function of the appliance.

Press and hold the alarm 1 or alarm 2 button for at least 3 seconds.
The appliance starts the demonstration of the corresponding alarm.
To switch off the demonstration, press and hold the previously pressed alarm button for 3 seconds again.

Audio Feedback

When you press a menu button, you hear a click. If you do not want to hear clicks when you press a button, press and hold the FM button for 5 seconds to switch off the audio feedback. You hear one click as a confirmation. To activate, press and hold the FM button again. You hear two clicks to confirm that the audio feedback is activated.

Button Backlight

The menu buttons have a backlight to help you to find the buttons. If you move your fingers close to the buttons, the backlight lights up. If you don’t press the button, the backlight goes out after a few seconds.

Storage

Clean the appliance with a soft cloth.
Do not use abrasive cleaning agents, pads, or cleaning solvents like alcohol, acetone, etc., as this may damage the surface of the appliance.
If the appliance will not be used for an extended period, remove the power cord from the wall outlet and store the appliance in a safe, dry location where it will not be crushed, banged, or subject to damage.
Do not wrap the power cord around the appliance when storing it.
This appliance has no other user-serviceable parts. For assistance, call 1-866-832-4361.

Important Safety Instructions

WARNING: To reduce the risk of FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:

Never use the appliance if the lamp housing is damaged, broken, or missing.
Heed all warnings.
Do not look directly at the lighted lamp.
If the appliance, power supply cord, or cord has been damaged in any way, liquid has spilled, or objects have fallen into the appliance, the appliance has been exposed to rain or moisture, does not operate normally, or has been dropped or damaged, it should not be operated.
Read this user manual carefully before you use the appliance and save it for future reference.
Water and electricity are a dangerous combination. Do not use this appliance in wet surroundings (e.g., in the bathroom or near a shower or swimming pool).
Make sure the adapter does not get wet.
Do not let water run into the appliance or spill water onto the appliance.
Do not immerse the appliance in water or rinse under the tap.
The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as this causes a hazardous situation.
Only use the original adapter. If the adapter or any of the other accessories are damaged, do not use them. Call 1-866-832-4361 for assistance.
Do not use the adapter in or near a power outlet that contains an electric air freshener to prevent damage to the adapter.
This appliance is for indoor use only.
Make sure the vents on the appliance remain open during use.
Protect the power cord from being walked on or pinched, particularly at plugs, outlets, and points where they exit from the lamp.
The appliance has no on/off switch. To disconnect the appliance from the power source, remove the plug from the wall outlet.

SAVE THESE INSTRUCTIONS

Important information

Warning

Check if the voltage indicated on the adapter corresponds to the local voltage before you connect the appliance.
This adapter transforms 100-240 volts to a safe, low voltage of less than 24 volts.
The appliance is suitable for a voltage of 120 Vac and a frequency of 50/60 Hz.
Close supervision is necessary when this appliance is used by, or near children or invalids.
Children should be supervised to ensure that they do not play with the appliance.

Caution

Do not drop the appliance on the floor, hit it hard, or expose it to other heavy shocks.
Place the appliance on a stable, level, and non-slippery surface.
Do not use the appliance at room temperatures lower than 50°F/10°C or higher than 95°F/35°C.
Consult your doctor before you start using the appliance if you have suffered from or are suffering from serious depression.
Do not use this appliance as a means to reduce your hours of sleep. The purpose of this appliance is to help you wake up more easily. It does not diminish your need for sleep.
This appliance is only intended for household use, including similar use in hotels. Do not use attachments not recommended by Philips North America LLC.

General

This appliance allows you to choose the light intensity level you want to wake up to.
If you often wake up too early or with a headache, reduce the light intensity level and/or the sunrise simulation time.
If you share a bedroom with someone else, this person may unintentionally wake up from the light of the appliance, even though this person is further removed from the appliance. This is the result of differences in light sensitivity between people.
The power consumption of the appliance is lowest if the radio and the lamp are turned off.

To fully benefit from the support that Philips offers, register your product at https://www.philips.com/welcome

The Philips Wake-up Light helps you wake up more pleasantly. In the set sunrise simulation time (default is 30 minutes), the light intensity of the lamp gradually increases to the set level and the light color changes from deep morning red to bright daylight. The light gently prepares your body for waking up at the set time. To make waking up an even more pleasant experience, you can use natural wake-up sounds or the FM radio to wake up to.

The Effects of the Wake-up Light

The Philips Wake-up Light gently prepares your body for waking up during the last 20 to 40 minutes of sleep, depending on the sunrise simulation time you set. In the early morning hours, our eyes are more sensitive to light than when we are awake. During that period, the relatively low light levels of a simulated natural sunrise prepare our body for waking up and getting alert. People who use the Wake-up Light wake up more easily, have a better overall mood in the morning, and feel more energetic. Because the sensitivity to light differs per person, you can set the light intensity of your Wake-up Light to a level that matches your light sensitivity for an optimal start of the day.

For more information about the Wake-up Light, see https://www.philips.com

Philips Wake-Up Light Therapy HF3520 Troubleshooting

Problem	Solution
The appliance does not work at all.	Perhaps the adapter is not inserted properly in the wall outlet. Put the adapter properly in the wall outlet. <br> Perhaps the plug is not inserted properly into the appliance. Put the plug properly into the appliance. <br> Perhaps there is a power failure. Check if the power supply works by connecting another appliance.
The appliance functions properly, but the lamp does not work anymore.	The appliance uses durable LED technology. The lamp should last a long time. However, if the lamp stops working, go to www.philips.com/support or call 1-866-832-4361 for assistance.
The appliance does not respond when I try to set different functions.	Remove the adapter from the wall outlet and wait a few minutes before you reinsert it. When you reinsert the adapter, the appliance goes back to the factory settings and you have to set all functions again.
The lamp does not go on when the alarm goes off.	Perhaps you set a light intensity level that is too low. Increase the light intensity level in your wake-up profile (see user manual for more information). <br> Perhaps you switched off the alarm function. The alarm icon is visible on the display when the alarm function is active.
The lamp does not go on right away when I switch it on.	It takes approx. 1 second for the lamp to go on. This is normal, the lamp needs to heat up.
I do not hear the alarm sound when the alarm goes off.	Perhaps you set a sound level that is too low. To set a higher sound level, increase the volume level of the wake-up sound in your wake-up profile (see user manual for more information). <br> Perhaps you switched off the alarm function. The alarm icon is visible on the display when the alarm function is active. <br> If you selected the radio as the alarm sound, switch on the radio after you switch off the alarm to check if the radio works. If it does not work, call 1-866-832-4361 for assistance.
The radio does not work.	Perhaps you set the volume too low. Increase the volume level. <br> Call 1-866-832-4361 for assistance.
The radio produces a crackling sound.	Perhaps the broadcast signal is weak. Adjust the frequency (see user manual for more information) and/or change the position of the antenna by moving it around. Make sure you have unwound the antenna completely.
The alarm went off yesterday, but it did not go off today.	Perhaps you switched off the alarm function. The alarm icon is visible on the display when the alarm function is active. <br> Perhaps you set a volume level and/or light intensity level that is too low. Set a higher volume level and/or light intensity level in your wake-up profile (see user manual for more information). <br> When there has been a power failure, the set clock time will be saved for up to 8 hours. Perhaps the power failure lasted longer. In this case, the appliance goes back to factory settings. You need to set all functions again.
I wanted to snooze, but the alarm did not go off again after 9 minutes.	Tap on the front of the Wake-up Light to snooze. If you press the alarm button, the FM button, or the MENU button, the alarm function will be deactivated.
The light wakes me too early.	Perhaps the light intensity level you have set is not appropriate for you. Try a lower light intensity level if you wake up too early. If light intensity 1 is not low enough, move the appliance further away from the bed.
The light wakes me too late.	Perhaps the appliance is positioned at a lower level than your head. Make sure the appliance is located at a height at which the light is not blocked by your bed, comforter/blanket or pillow. Also make sure the appliance is not placed too far away.
The lamp flashes.	Perhaps the appliance is not suitable for the voltage to which it is connected. Make sure that the voltage indicated on the appliance corresponds to the local voltage.

Warranty

Full Two-Year Warranty

Philips North America LLC (USA) and Philips Electronics Ltd (Canada) warrant this new product against defects in materials or workmanship for a period of two years from the date of purchase and agree to repair or replace any defective product without charge.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product, or loss of parts or subjecting the product to any but the specified voltage or batteries.

90-Day Money-Back Guarantee

If you are not fully satisfied with your Philips Wake-up Light, send the product back, and we’ll refund you the full purchase price. The Wake-up Light must be shipped prepaid by insured mail, insurance prepaid, have the original sales receipt, indicating the purchase price and the date of purchase, and the money-back guarantee return authorization form enclosed. We cannot be responsible for lost mail. The Wake-up Light must be postmarked no later than 90 days after the date of purchase. Philips reserves the right to verify the purchase price of the Wake-up Light and limit refunds not to exceed the suggested retail price. To obtain a Money-Back Guarantee Return Authorization form, call 1-866-832-4361. Delivery of the refund check will occur 6-8 weeks AFTER receipt of the returned product.

Pros & Cons

Pros

Clinically proven light therapy for natural waking up
Customizable brightness levels and wake-up sounds
Sleek and modern design
SmartTouch technology for easy operation
Back-up battery in case of power outage

Cons

May be expensive for some users
The light therapy feature may not be suitable for everyone
The wake-up sounds may not be loud enough for heavy sleepers

Customer Reviews

The Philips Wake-Up Light Therapy HF3520 has received positive reviews from many customers, with many praising its light therapy feature and customizable options. However, some customers have complained about the high price and the inadequacy of the wake-up sounds for heavy sleepers.

Search Manuals in: therapy

Read More