Roland V-Drums Bar Trigger Pad BT-1 Introduction

Roland V-Drums Bar is a compact and versatile accessory designed to enhance any drum kit, whether electronic or acoustic. Its unique curved shape allows for easy mounting on the side of a V-Pad or acoustic drum, providing convenient access without disrupting your setup. The BT-1 is perfect for triggering sounds in a V-Drums module or controlling various functions like backing tracks. Priced at approximately $109.20, it offers musicians an affordable way to expand their creative possibilities.

What’s in the Package

BT-1
Attachment (for rod type mount)
attachment bolt x 2
Spacer (S) x 1, (L) x 1
Connection cable
Owner’s manual

Parts Descriptions

Roland BT 1 Bar Trigger Pad - Playing surface

About the spacer
When shipped from the factory, the spacer (S) is installed and you can use the BT-1 as it is. When attaching the BT-1 to the hoop of the PDX-100 or PD-85, replace the spacer (S) with the spacer (L).

Main Specifications

Roland BT-1: Bar Trigger Pad

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

Description

The BT-1 features a robust rubber trigger surface that provides a natural playing feel, making it ideal for drummers who want to maintain the organic sensation of playing acoustic drums but with the versatility of electronic triggers. The adjustable trigger sensitivity allows players to customize the response to their playing style. Its compact design ensures it can fit into any setup without taking up too much space, making it perfect for both home practice and live performances.

Getting Started

Main Features

A bar-type single trigger pad that you can strike with the shoulder of your stick
Can be attached to the hoop of a V-Drums mesh pad or your acoustic drum Also supports commercially-available rod-type mounts and V-Drums stand pad mounts
The BT-1 is designed to minimize unintended triggering and can be used as a pad switch for changing kits or starting/stopping songs
Compact design that won’t obstruct your playing

Settings

The BT-1 can be attached to the hoop (tuning bolt) of a V-Drums mesh pad or your acoustic snare or tom.
By using the included attachment, you can also attach it to a commercially-available stand (rod type mount) or to the pad mount of a V-Drums stand.

Attaching the BT-1 to a Drum Hoop

NOTE
When the BT-1 is attached on the hoop of an acoustic drum or V-Drums pad, striking the BT-1 will cause the drum it is mounted on to sound. If this presents a problem, the BT-1 can be mounted on a stand (p. 6).

Depending on the shape of the hoop, it might not be possible to attach the BT-1 correctly (p. 12).
The BT-1 cannot be attached to the hoop of a bass drum.
The BT-1 cannot be attached to the PDX-8 or PDX-6.
In order to attach the BT-1 to a PDX-100 or PD-85, you must first install the spacer (L).

Remove the tuning bolt from the location where you want to attach the BT-1.
If the head is strongly tensioned, slightly loosen the entire head before you proceed.
Lay the mounting hole of the BT-1 over the bolt hole of the hoop.
Attach the tuning bolt.
Adjust the tension of the head. * Strikes on the BT-1 may affect the tension of the head.

Attaching the BT-1 to a Stand

In order to attach the BT-1 to a stand (rod type mount), you must first install the included attachment on the BT-1. Installing the attachment

Install the attachment on the BT-1 as shown in the illustration.
Use the included attachment bolts to fasten the attachment securely.
- Remove the spacer.
- Use your own drum key to tighten the bolts.

Attaching the BT-1 to a stand

Attach the BT-1 to the rod of the stand, and tighten the stand attachment bolt.
* When attaching the BT-1 to the stand, be sure to tighten the stand attachment bolt securely. If any of them remain loose, the pad could fall off.

Roland BT 1 Bar Trigger Pad - attachment

MEMO
When attaching the BT-1 to a commercially available rod type mount, check the dimensions of the rod. Depending on the dimensions of the rod, it may not be possible to ttach the pad to the rod. Acceptable rod diameters: 8.0–12.5 mm (3/8–1/2 inch)

Connecting to a Drum Sound Module

Use the included cable to connect the BT-1 to your drum sound module.
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.

Use the included cable to connect the BT-1’s output jack to a trigger input of your drum sound module.
* You must use a stereo cable. The operation will not be correct if any other cable is used.
* When connecting the BT-1 to a TD-15, TD-11, TD-9, or TD-4, you can also use the cable included with the drum sound module.
Make the trigger parameter settings for the drum sound module.
For details on parameter values recommended for each sound module, refer to p. 8.
Strike the BT-1 and verify that it is operating correctly.

MEMO

The BT-1 is a single trigger pad. It cannot distinguish strikes on its head and rim.
With some drum sound modules, the BT-1 will function as the rim trigger of a pad. In this case,
we recommend that no sound or control function (e.g., pad pattern) be assigned to the “head” of the input the BT-1 is connected to.

Trigger Parameter Settings for the Drum Sound Module

In order for the BT-1 to operate correctly, you must specify the optimal trigger parameter values on your drum sound module.
* For details on how to make settings, refer to the owner’s manual of your drum sound module.
* You may need to adjust the trigger parameters depending on how you’ve attached the BT-1 and the location at which you’ve installed it.

TD-30

Trig Type

BT1

TALK

20–40

* When using a BT-1 on a V-Drums pad, set this XTALK parameter for that V-Drums pad.

* The BT-1 will operate only as the head trigger.
* If “BT1” does not appear as a Trig Type choice, update your system program.

TD-15, TD-11

Pad Type

BT-1

Xtalk Cancel

20–40

* When using a BT-1 on a V-Drums pad, set this Xtalk Cancel parameter for that V-Drums pad.

* The BT-1 will operate only as the head trigger.
* The “KIK” and “RDB” trigger inputs are not supported.
* If “BT-1” does not appear as a Pad Type choice, update your system program.

Updating your system program
TD-30, TD-15, TD-11, Octapad SPD-30, SPD-SX On these models, “BT-1” will appear as a choice for Trig Type (or Pad Type) if you update the system program of your unit. For details on how to update, refer to the following URL. http://www.roland.com/support/

Octapad SPD-30

Pad Type

BT-1

X-Talk Cancel Rate

20–40

* When using a BT-1 on a V-Drums pad, set this X-Talk Cancel Rate parameter for that V-Drums pad.

* The BT-1 will operate only as the head trigger.
* If “BT-1” does not appear as a Pad Type choice, update your system program (p. 8).

SPD-SX

INPUT MODE	HEAD&RIM
TRIG TYPE	BT-1

XTALK CANCEL

20–40

* When using a BT-1 on a V-Drums pad, set this XTALK CANCEL parameter for that

V-Drums pad.

* The BT-1 will operate only as the head trigger.
* The BT-1 will not operate correctly if INPUT MODE is set to TRIGx2.
* If “BT-1” does not appear as a TRIG TYPE choice, update your system program (p. 8)

TD-20X, TD-20, TDW-20, TD-12

Roland BT 1 Bar Trigger Pad - Sensitivity

Trig Type	PAD1
Sensitivity	12
XTALK CANCEL	25
MOUNT TYPE	PAD

XTALK CANCEL

20–60 * When using a BT-1 on a V-Drums pad, set this XTALK CANCEL parameter for that V-Drums pad.

Trigger Parameter Settings for the Drum Sound Module

Trig Type	PD8
Sensitivity	12
Threshold	8
Scan Time	1.6
Retrig Cancel	4
Mask Time	8
XTalk Cancel	25
Rim Gain	1.0

chalk Cancel

20–40 * When using a BT-1 on a V-Drums pad, set this XTalk Cancel parameter for that V-Drums pad.

* The “KIK” and “RDB” trigger inputs are not supported.
* The BT-1 will operate as the rim trigger of the pad. No sound or control function (e.g., pad pattern) should be assigned to the “head” of the input the BT-1 is connected to.

TD-4

Pad Type	PD-8
Sensitivity	12
Threshold	8
Scan Time	1.6 ms
Retrig Cancel	4
Mask Time	8 ms
Xtalk Cancel	25 %
Rim Gain	1.0

Xtalk Cancel

20–40 % * When using a BT-1 on a V-Drums pad, set this Xtalk Cancel parameter for that V-Drums pad.

* The “KIK”, “T1”, “T2”, and “T3” trigger inputs are not supported.
* The BT-1 will operate as the rim trigger of the pad. No sound or control function (e.g., pad pattern) should be assigned to the “head” of the input the BT-1 is connected to.

Setup Guide

Setting up the BT-1 is straightforward and easy.

Here are the steps:

Attach the BT-1 to your drum kit using the provided clamp or rod mount.
Connect the BT-1 to your Roland V-Drums module or other compatible electronic drum kit via the included cable.
Adjust the trigger sensitivity to your preference using the module's settings.
Test the trigger by playing it to ensure proper response and adjust as necessary.

USING THE UNIT SAFELY

Before using this unit, carefully read the sections entitled “USING THE UNIT SAFELY” and “IMPORTANT NOTES”. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature of your new unit, read Owner’s manual should be read in its entirety. This manual should be saved and kept on hand as a convenient reference.

INSTRUCTIONS FOR THE PREVENTION OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

About WARNING and CAUTION Notices

About the Symbols

ALWAYS OBSERVE THE FOLLOWING

WARNING

Do not disassemble or modify by yourself
Do not open or perform any internal modifications on the unit.
Do not repair or replace parts by yourself
Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page.
Do not use or store in the following types of locations
Subject to temperature extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are
Damp (e.g., baths, washrooms, on wet floors); or are
Exposed to steam or smoke, or are
Subject to salt exposure, or are
Humid; or are
Exposed to rain, or are
Dusty or sandy, or are
Subject to high levels of vibration and shakiness.

WARNING

Precautions regarding placement of this unit on a stand
Be sure to follow the instructions in the Owner’s Manual carefully when placing this unit on a stand (p. 5).
If it is not set up properly, you risk creating an unstable situation which could lead to the unit falling and may result in injury.
Don’t allow foreign objects or liquids to enter the unit
Never allow foreign objects (e.g., flammable objects, coins, wires) or liquids (e.g., water or juice) to enter this product. Doing so may cause short circuits, faulty operation, or other malfunctions.
Adults must provide supervision in places where children are present
When using the unit in locations where children are present, be careful so no mishandling of the unit can take place. An adult should always be on hand to provide supervision and guidance.

Do not drop or be subject to strong impact Protect the unit from strong impact. (Do not drop it!)

CAUTION
Avoid climbing on top of the unit, or placing heavy objects on it
Never climb on top of, nor place heavy objects on the unit.

IMPORTANT NOTES

CAUTION

Keep small items out of the reach of children
To prevent accidental ingestion of the parts listed below, always keep them out of the reach of small children
Included Parts Bolts, Spacers (p. 4)

Placement

Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.
When moved from one location to another where the temperature and/or humidity is very different, water droplets (condensation) may form inside the unit. Damage or malfunction may result if you attempt to use the unit in this condition. Therefore, before using the unit, you must allow it to stand for several hours, until the condensation has completely evaporated.
Do not allow rubber, vinyl, or similar materials to remain on this unit for long periods of time. Such objects can discolor or otherwise harmfully affect the finish.

Maintenance

For every day, cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterward, be sure to wipe the unit thoroughly with a soft, dry cloth.
Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.

Additional Precautions

Use a reasonable amount of care when using its output jack. Rough handling can lead to malfunctions.
When disconnecting all cables, grasp the connector itself–never pull on the cable. This way you will avoid causing shorts, or damage to the cable’s internal elements.
This instrument is designed to minimize the extraneous sounds produced when it’s played. However, since sound vibrations can be transmitted through floors and walls to a greater degree than expected, take care not to allow these sounds to become a nuisance to others nearby.
The rubber portion of the striking surface is treated with a preservative to maintain its performance. With the passage of time, this preservative may appear on the surface as a white stain, or reveal how the pads were struck during product testing. This does not affect the performance or functionality of the product, and you may continue using it with confidence.
Continuous playing may cause discoloration of the pad, but this will not affect the Pad’s function.

Troubleshooting

If the BT-1 does not operate as you expect, please check the following points first.
If you are still unable to resolve the problem, contact your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page.

Problem	Check / Action
No sound	Check the connections. (p. 7)
	Firmly insert the plug of the connection cable all the way into the jack.
	Use a stereo cable. (p. 7)
	Adjust the volume to an appropriate level.
	Check the instrument that’s assigned to the head (or rim) trigger.
	Check the drum sound module’s trigger indicator to confirm that the drum sound module is receiving the trigger signals.
	On some drum sound modules, the instrument might not sound if you’ve assigned a control function to the pad. For details, refer to the owner’s manual of your drum sound module.
The sound of another pad is also heard when you strike the BT-1	When the BT-1 is attached to the hoop of a V-Drums pad, striking the BT-1 will cause that pad to sound. If this presents a problem, it can be mounted on an optional stand.
	Adjust the crosstalk cancel setting of your drum sound module.
	Reattach the BT-1 at a different location.
Two or more notes are sounded when you strike once	Fasten the BT-1 firmly to the hoop or stand.
	Fasten the attachment firmly.
	Increase the retrigger cancel setting on your drum sound module. If this has no effect, increase the mask time setting.
The rim sound is heard instead of the head sound	When the BT-1 is connected to some drum sound modules, the head sound will not be triggered. The BT-1 will operate only as a rim trigger. This is not a malfunction.
The BT-1 is triggered when you strike a different pad or drum	Use a stereo cable. (p. 7)
	If you’re using a drum sound module with which the BT-1 operates as a rim trigger, do not assign an instrument or control function to the head of the trigger input the BT-1 is connected to. (p. 8)

Roland V-Drums Bar Trigger Pad BT-1 Pros & Cons

Pros

Highly responsive and durable trigger surface
Adjustable trigger sensitivity for customized playing experience
Compact and lightweight design for easy transport and setup
Seamless integration with Roland V-Drums modules
Affordable price point compared to other professional-grade triggers

Cons

Limited to use with compatible modules; may not work with all electronic drum kits
No built-in module; requires an external device for sound production
May require additional mounting hardware for certain setups

Customer Reviews

Customers have praised the BT-1 for its reliability, ease of setup, and excellent trigger response. Many have noted that it integrates seamlessly with their existing V-Drums setups and has expanded their creative possibilities. Some common complaints include the need for additional mounting hardware in certain configurations and the requirement for a compatible module to function.

Trigger	1
Connector	OUTPUT Jack (Stereo 1/4” phone type)
Dimensions	170 (W) x 53 (D) x 60 (H) mm 6-3/4 (W) x 2-1/8 (D) x 2-3/8 (H) inches
Weight	300 g 11 oz
Accessories	Owner’s manual, Attachment, Attachment bolt, Spacer, Connection cable (stereo)
Supported V-Drums pads	PD-128S, PD-128, PD-108, PD-125, PD-105, PDX-100, PD-85
Acceptable hoop size	* Depending on the shape of the hoop, it might not be possible to attach the BT-1 correctly.
Acceptable rod diameters	8.0–12.5 mm 3/8–1/2 inch
Options (sold separately)	Pad Mount (MDH series)

	The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger.
	The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled.
	The symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the power-cord plug must be unplugged from the outlet.

Search Manuals in: trigger-pad

Read More