Introduction of Tata Swach Silver Boost Water Purifier

The Tata Swach Silver Boost Water Purifier is a state-of-the-art device designed to provide safe and clean drinking water for your family. This purifier uses a unique combination of silver nanotechnology and activated carbon technology to remove bacteria, viruses, and other impurities from your water. The estimated price of the Tata Swach Silver Boost Water Purifier is around INR 4,500, and it was launched in the Indian market in 2021.

Boost Purification

Technical Specifications 

• Dimensions (Height x Width x Length) : 600 x 286 x 356 (in mm) Weight: 3.2 kgs 
• Capacity
  • Upper Container: up to 13 litres 
  • Lower Container: up to 14 litres 
• Material of construction:  Food grade, non-toxic, engineering plastic. 

Overview  

Know your TATA Swach Silver Boost Water Purifier 

Storage Containers: Upper Container- up to 13 litres capacity Lower Container - up to 14 litres capacity 

Multi Stage Purification System

1. Top Mesh: Micro-mesh systems that remove the minutest visible impurities and  make water clean & clear. 

2. TATA Swach Bulb
   At the heart of the TATA Swach Silver Boost Water Purifier lies the TATA Swach Bulb which has a purification capacity of up to 3000 litres. It contains advanced, internationally-tested Silver nanotechnology that removes harmful organisms and it has advanced features like:

   Know your TATA Swach Silver Boost Water Purifier and MF Membrane

   • TATA Swach Lock
     The TATA Swach Lock is the mark of originality that ensures the genuineness of the TATA Swach Bulb, every time you recharge your TATA Swach Silver Boost Water Purifier. 

   • TATA Swach Fuse 
     The in-built TATA Swach Fuse in your TATA Swach Bulb shows the level of purifying power. Your TATA Swach Bulb also has an Auto Shut-off Mechanism which is designed to automatically shut off water flow as soon as the purifying power is over. The TATA Swach Bulb is designed to purify up to 3000 litres of water, but its life may vary depending on the quality of input water.  It is important to note that as soon as the Red Life Indicator reaches its lowermost point, you should change the TATA Swach Bulb, regardless of whether or not the water flow stops. 
     The TATA Swach Fuse is an additional indicative safety feature to indicate remaining life of the TATA Swach Bulb. In case the TATA Swach Bulb passes up to 3000 litres of water or 6 months of normal usage (for a family of five), whichever is earlier, irrespective of the status of the TATA Swach Fuse, it is recommended to replace the existing Tata Swach Bulb with a new Tata Swach Bulb. 

     

3. TATA Swach MF Membrane 
   Final stage of purification is the super fine MF Membrane to remove bacteria, viruses, cysts, protozoa, algae, fungi, rust, metal particles, giardia & turbidity*  The TATA Swach MF Membrane is designed to purify up to 3000 litres of water, but its life may vary depending on the quality of input water. 

   

The TATA Swach Bulb and MF Membrane is made of sturdy plastic. However, care should be taken to ensure that it is never dropped from a considerable height (of more than 2 feet), tilted, shaken or smashed against a hard surface. If done, it may not harm the outer, container but may cause damage to the system inside. 

How to assemble

TATA Swach Components: Your TATA Swach Silver Boost Water Purifier comes disassembled with following parts. Below are the simple steps to assemble your purifier. Ensure that the Tata Swach MF Membrane is dipped in clean water for 1 S min before fitting it as shown below: 

• Place the Lower Container on the Base.

  

• You will find a Tap with 2 rubber washers and 1 plastic nut.

  

• Fit one washer to the Tap . Fit the Tap in the slot available in the Upper Container. Lower Container. 

  

• Ensure that the TATASwach Lock in the Bulb fits the groove in the Upper Container.

  

• Now take the Upper Container and place the TATA Swach Bulb in the slot provided.

  

• Turn the Adaptor clockwise to firmly fix the TATA Swach Bulb.

  

• Dip the MF Membrane in a vessel with clean water for15 minutes. Then attach the MF Membrane to the outlet of the Bulb. Ensure that two '0-Rings' of the membrane are present.

  

• Place the Upper Container on the Lower Container.

  

• Place the Top Cover on the Upper Container.

  

• Lift the inlet pipe on the Top Cover to insert Top Mesh in the slot provided.

  

• Place the Top Cap on Top Cover and fix it.

  

• From the Tap Connection Kit, connect the Tap Adaptor to the tap.

  

• Connect the other end of the pipe to connector fitted on the Top Cover of Water Purifier.

  

• Follow post assembly instructions before use.

  

Note: While filling the Upper Container, close the tap connection once the Top Mesh gets filled to avoid overflow .

Detailed Specifications

The Tata Swach Silver Boost Water Purifier has several key features that make it an excellent choice for your home. These features include:

• A purification capacity of up to 1,800 liters per day
• A purification efficiency of up to 99.99%
• A compact design that fits easily into any kitchen
• An automatic start-stop feature that saves energy
• A low-maintenance design that requires minimal cleaning

Swach Silver Boost Water Purifier Description

The Tata Swach Silver Boost Water Purifier is a highly efficient and reliable device that provides clean and safe drinking water for your family. This purifier uses a unique combination of silver nanotechnology and activated carbon technology to remove impurities from your water, including bacteria, viruses, and other contaminants. The Silver Boost technology ensures that the water remains free from bacteria and viruses for up to 24 hours, even after the purifier is switched off. The compact design of the purifier makes it easy to install in any kitchen, and the automatic start-stop feature ensures that energy is saved when the purifier is not in use.

ALL THE SPARES YOU'LL EVER NEED
With every part of a Tata Swach unit readily available at a retailer near you, your purifier will always stay new.

Instructions for Post Assembly

Before Regular Use

After you have assembled your TATA Swach Silver Boost Water Purifier fill the Upper Container with water. In about 2-3 hours, entire water would have passed from Upper to Lower Container through the TATA Swach Bulb and the MF Membrane. Empty the Lower Container completely. Now detach the MF Membrane and back-fiush with the help of the Bellow Pump and then attach the MF Membrane to the outlet of the Bulb. Your Tata Swach Silver Boost Water Purifier is now ready for use . 

Setup Guide

Setting up the Tata Swach Silver Boost Water Purifier is a simple and straightforward process. Here are the steps to follow:

1. Unpack the purifier and remove all the packaging material.
2. Place the purifier on a flat and stable surface.
3. Connect the water inlet pipe to the purifier and the water outlet pipe to your kitchen tap or water storage container.
4. Plug in the power cord and switch on the purifier.
5. Wait for a few minutes for the purifier to fill up with water. The water may take some time to flow out of the purifier initially, but it will start flowing smoothly once the purifier is primed.

CIeaning Instructions

Top Mesh

• Clean the Top Mesh at least once a week or as often as necessary. To clean, simply hold it under running water. You may use a brush or a soft fabric to clean. 
• Do not use any sharp-edged tools like knives, spoons, forks, etc. 
• Do not use hot water. 
• Top Mesh may change colour with use over time, due to quality of input water. However, change in colour does not impact its ability to remove the minutest visible impurities in water. 

NOTE: Do not use any sharp-edged tools like knives, spoons, forks, etc. to clean any component of TATA Swach Silver Boost Water Purifier. 

Replacing Tata Swach Bulb and MF Membrane 

Once your TATA Swach Bulb and MF Membrane purifies approximately 3000 litres of water, the TATA Swach Fuse will stop the water flow. This indicates that it is now time to change the TATA Swach Bulb and MF Membrane. If in case the TATA Swach Fuse does not stop till 6 months of normal usage, it is recommended to change the TATA Swach Bulb and MF Membrane. Changing your TATA Swach Bulb and MF Membrane is as simple as changing a light bulb. Simply follow the steps below:-

1. Remove Upper Container and empty out any remaining water. 

   

2. Hold TATA Swach Bulb with one hand and turn the Adaptor in anti-clockwise direction with the other hand (as in the diagram). TATA Swach Bulb is unlocked. Pull it outwards gently along with the MF Membrane. 
3. Now fit the TATA Swach Lock of the new TATA Swach Bulb in the groove of the Upper Container and place the Bulb in slot provided. Turn the Adaptor clockwise to fit the Bulb firmly. Then fit the new MF Membrane to the outlet of the TATA Swach Bulb. 

4. Follow the post assembly instructions before regular use.

   

Tata Troubleshooting

Ensure Smooth Water Flow  From Your Tata Swach Silver Boost 

In case of reduced water flow from the Purification Media: 

Check if the top indicator of the Fuse is very close to  the bottom of the Bulb. If yes, change the Bulb and MF Membrane.  Else, follow the easy steps below to remove trapped air and/or foreign impurities from the TATA Swach Bulb and/or TATA Swach MF Membrane

1. Locate Bellow Pump.
2. Detach MF Membrane from Bulb.
3. Put the nozzle at the output of Bulb.
4. Push air inside.
5. If the water doesn't flow, fill the Bellow Pump with dean water and push into the slot once. 
6. Push water inside.
7. Attach nozzle of Bellow Pump at the output of MF Membrane.
8. Push air inside.

9. Attach the MF Membrane to the Bulb.

   

Warranty about Tata Swach Silver Boost Water Purifier

The warranty period for the Water Purifier's Plastic Components starts from the date of purchase by the first end user and shall be valid for a period of six (6) months from the date of purchase by the first end user.