[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"top-categories":3,"$fnrdIgvaEWlvJyd8EscXinCpNiNXpt_bI4Q395x3UGi8":105,"$fczVi3P4Qr8kNqEiQWok_Q9oJCY6QoluY20K6P-VYL4g":186},{"statusCode":4,"message":5,"data":6},200,"Found top categories!",[7,11,15,20,24,28,32,36,41,45,49,54,58,62,66,70,74,78,82,85,89,93,97,101],{"_id":8,"name":9,"slug":9,"posts_count":10},"65b98e6b00650ab0139663cb","philips",337,{"_id":12,"name":13,"slug":13,"posts_count":14},"65f193f50b38412280a12a8b","remington",224,{"_id":16,"name":17,"slug":18,"posts_count":19},"65b98303fb1e5a098bef4288","hamilton beach","hamilton-beach",215,{"_id":21,"name":22,"slug":22,"posts_count":23},"6603f189559bb40f61d73dc8","beurer",180,{"_id":25,"name":26,"slug":26,"posts_count":27},"65b98fa1d7d1d87020daed54","tp-link",157,{"_id":29,"name":30,"slug":30,"posts_count":31},"66a23a3fe0221e50e61db0cb","midea",153,{"_id":33,"name":34,"slug":34,"posts_count":35},"660804c989b73d8967d265f8","eufy",145,{"_id":37,"name":38,"slug":39,"posts_count":40},"6a9fb99d5c45270d9f9c206c","fisher&paykel","fisherpaykel",138,{"_id":42,"name":43,"slug":43,"posts_count":44},"65b97c51fb1e5a098bef4260","hp",135,{"_id":46,"name":47,"slug":47,"posts_count":48},"65b982e8fb1e5a098bef4283","boss",132,{"_id":50,"name":51,"slug":52,"posts_count":53},"6a7b3040d0a08570392cf78c","ge appliances","ge-appliances",131,{"_id":55,"name":56,"slug":56,"posts_count":57},"65b998aad7d1d87020daef72","cuisinart",127,{"_id":59,"name":60,"slug":60,"posts_count":61},"6603ffea432eb2c5716ffe24","craftsman",125,{"_id":63,"name":64,"slug":64,"posts_count":65},"65b9640247dc48a130b9ba12","jbl",124,{"_id":67,"name":68,"slug":68,"posts_count":69},"6a7edd76a4ec6f30ae365cfd","carrier",102,{"_id":71,"name":72,"slug":72,"posts_count":73},"6a38da0635740ca1a7be5a67","neomounts",100,{"_id":75,"name":76,"slug":76,"posts_count":77},"65f9637e55041d5cae9e88db","garmin",99,{"_id":79,"name":80,"slug":80,"posts_count":81},"660cff91ca2fbf082a6fd56b","asus",96,{"_id":83,"name":84,"slug":84,"posts_count":81},"65b99806fb1e5a098bef4423","netgear",{"_id":86,"name":87,"slug":87,"posts_count":88},"6901d6bc1c83bca499ec173a","aiwa",93,{"_id":90,"name":91,"slug":91,"posts_count":92},"6a4debda47666dc6def30a08","miele",86,{"_id":94,"name":95,"slug":95,"posts_count":96},"6608037d6af97e2169c54699","breville",84,{"_id":98,"name":99,"slug":99,"posts_count":100},"660153a35f81e3a1279b2c70","vornado",82,{"_id":102,"name":103,"slug":103,"posts_count":104},"6606e00391396ca9bc11cbac","panasonic",80,{"statusCode":4,"message":106,"data":107},"Post found!",{"post":108,"relatedPosts":175,"linkTags":184},{"_id":109,"title":110,"full_title":111,"content":112,"status":113,"category":114,"category_name":116,"tags":118,"published_at":135,"pdf_type":136,"doc_type":123,"faqs":137,"show_pdf":168,"createdAt":169,"updatedAt":170,"firebase_pdf_path":171,"meta_description":172,"feature_image":117,"firebase_pdf_url":173,"permalink":117,"feature_image_url":117,"category_title":174,"id":109},"66e9573aca1f047e1be00c6f","Sliding Gate Opener CK1200","Topens Sliding Gate Opener CK1200 User Manual | Specs","\u003Chtml>\u003Chead>\u003C\u002Fhead>\u003Cbody>\u003Ch2>Introducing the Topens Sliding Gate Opener CK1200\u003C\u002Fh2>\u003Cfigure class=\"image image_resized\" style=\"width:79.18%;\">\u003Cimg style=\"aspect-ratio:813\u002F728;\" src=\"https:\u002F\u002Fmanualsfact.com\u002Fmedia\u002Fposts\u002F66e9573aca1f047e1be00c6f\u002Ftopens_sliding_gate_opener_ck1200.png\" width=\"813\" height=\"728\" alt=\"topens_sliding_gate_opener_ck1200.png\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cp>TOPENS is a powerful and reliable solution for securing your driveway. Equipped with a strong 3\u002F4 HP 550W AC motor, it effortlessly operates gates weighing up to 3400 lbs and measuring 40 ft in length. The CK1200 features cutting-edge TOPENS code technology for enhanced security, a midway mode for partial gate opening, and a safety stop-and-reverse module to prevent accidents. This easy-to-install gate opener comes with a 20ft roller chain and remote control, making it an ideal choice for residential, commercial, and agricultural applications. The TOPENS CK1200 is priced at approximately $499.99.\u003C\u002Fp>\u003Ch2>Detailed Specifications\u003C\u002Fh2>\u003Cp>The Topens Sliding Gate Opener CK1200 boasts several key features that make it stand out in the market. Here are some of the detailed specifications:\u003C\u002Fp>\u003Cul>\u003Cli>\u003Cstrong>Gate Capacity:\u003C\u002Fstrong> Supports gates up to 1200 pounds and 40 feet in length.\u003C\u002Fli>\u003Cli>\u003Cstrong>Motor Power:\u003C\u002Fstrong> 1200 watts of powerful and efficient motor.\u003C\u002Fli>\u003Cli>\u003Cstrong>Speed:\u003C\u002Fstrong> Opens gates at a speed of approximately 12 inches per second.\u003C\u002Fli>\u003Cli>\u003Cstrong>Control Options:\u003C\u002Fstrong> Compatible with remote controls, wall switches, and smart home systems.\u003C\u002Fli>\u003Cli>\u003Cstrong>Safety Features:\u003C\u002Fstrong> Includes automatic reversal upon encountering obstacles and a manual release mechanism\u003C\u002Fli>\u003C\u002Ful>\u003Ch2 style=\"margin-left:0px;\">\u003Cstrong>Preparation for Installation\u003C\u002Fstrong>\u003C\u002Fh2>\u003Cp style=\"margin-left:0px;\">Before proceeding to your opener installation, check if your gate structure is in accordance with the current standards, especially as follows:\u003Cbr>The gate sliding track is linear and horizontal, and the wheels are suitable, the gate should be mounted and moving freely. Check that the structure is sufficiently strong and rigid, Make sure that the gate is plumb and level. The fence posts must be mounted in concrete. The gate does not bind or drag on the ground. The opening and closing gate stops are positioned.\u003C\u002Fp>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>WARNING:\u003C\u002Fstrong> Remember that control devices are intended to facilitate gate operation, but can not solve problems due to any defects or deficiency resulting from failure to carry out correct installation or maintenance. Take the product out of its packing and inspect it for damage. Should it be damaged, contact your dealer. Remember to dispose of its components (cardboard, polystyrene, nylon, etc.) according to the current prescriptions.\u003C\u002Fp>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>Refer to the following Figures for gate installation\u003C\u002Fstrong>\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:873\u002F320;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-06.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-06\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-06.jpg 1181w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-06-550x202.jpg 550w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-06-1024x375.jpg 1024w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-06-768x282.jpg 768w\" sizes=\"100vw\" width=\"873\" height=\"320\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cp style=\"margin-left:0px;\">In sake of safety, a positive stop must be mounted on the two end of ground track.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:725\u002F295;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-07.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-07\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-07.jpg 1191w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-07-550x224.jpg 550w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-07-1024x417.jpg 1024w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-07-768x313.jpg 768w\" sizes=\"100vw\" width=\"725\" height=\"295\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:801\u002F326;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-07.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-07\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-07.jpg 1191w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-07-550x224.jpg 550w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-07-1024x417.jpg 1024w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-07-768x313.jpg 768w\" sizes=\"100vw\" width=\"801\" height=\"326\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:984\u002F389;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-08.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-08\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-08.jpg 1227w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-08-550x217.jpg 550w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-08-1024x405.jpg 1024w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-08-768x304.jpg 768w\" sizes=\"100vw\" width=\"984\" height=\"389\" loading=\"lazy\">\u003C\u002Ffigure>\u003Ch2 style=\"margin-left:0px;\">\u003Cstrong>Parts List\u003C\u002Fstrong>\u003C\u002Fh2>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:1004\u002F1068;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-09.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-09\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-09.jpg 1242w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-09-517x550.jpg 517w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-09-963x1024.jpg 963w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-09-768x817.jpg 768w\" sizes=\"100vw\" width=\"1004\" height=\"1068\" loading=\"lazy\">\u003C\u002Ffigure>\u003Ch3 style=\"margin-left:0px;\">\u003Cstrong>Accessories Parts \u003C\u002Fstrong>\u003C\u002Fh3>\u003Cp style=\"margin-left:0px;\">(Included in some models, refers to the actual package)\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:777\u002F186;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-10.jpg?ezimgfmt=rs:777x186\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-10\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-10.jpg?ezimgfmt=ng:webp\u002Fngcb1 777w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-10-550x132.jpg?ezimgfmt=ng:webp\u002Fngcb1 550w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-10-768x184.jpg?ezimgfmt=ng:webp\u002Fngcb1 768w\" sizes=\"100vw\" width=\"777\" height=\"186\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>Optional Accessories Parts List (Available at TOPENS Store)\u003C\u002Fstrong>\u003C\u002Fp>\u003Cfigure class=\"image image_resized\" style=\"width:48.03%;\">\u003Cimg style=\"aspect-ratio:582\u002F482;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-11.png\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-11\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-11.png 582w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-11-550x455.png 550w\" sizes=\"100vw\" width=\"582\" height=\"482\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>Replacement Parts\u003C\u002Fstrong>\u003C\u002Fp>\u003Cfigure class=\"image image_resized\" style=\"width:46.94%;\">\u003Cimg style=\"aspect-ratio:695\u002F194;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-12.png?ezimgfmt=rs:695x194\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-12\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-12.png?ezimgfmt=ng:webp\u002Fngcb1 695w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-12-550x154.png?ezimgfmt=ng:webp\u002Fngcb1 550w\" sizes=\"100vw\" width=\"695\" height=\"194\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>WARNING:\u003C\u002Fstrong> Changes or modifications not expressly specified by this user manual, TOPENS could void the warranty of this equipment.\u003C\u002Fp>\u003Ch2 style=\"margin-left:0px;\">\u003Cstrong>Technical Specifications\u003C\u002Fstrong>\u003C\u002Fh2>\u003Cfigure class=\"table\">\u003Ctable>\u003Ctbody>\u003Ctr>\u003Ctd style=\"border:1.0pt solid black;height:21.0pt;padding:0in;vertical-align:top;width:143.75pt;\">\u003Cstrong>Specifications\u003C\u002Fstrong>\u003C\u002Ftd>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:none;border-right-style:solid;border-top-style:solid;border-width:1.0pt;height:21.0pt;padding:0in;vertical-align:top;width:212.05pt;\">\u003Cp style=\"margin-left:86.25pt;text-align:center;\">CK1200\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:15.6pt;padding:0in;vertical-align:top;width:143.75pt;\">\u003Cp style=\"margin-left:0in;text-align:right;\">Power input:\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:15.6pt;padding:0in;vertical-align:top;width:212.05pt;\">\u003Cp style=\"margin-left:19.3pt;\">110V~120V\u002F60Hzor 220~240V\u002F50Hz\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:15.6pt;padding:0in;vertical-align:top;width:143.75pt;\">\u003Cp style=\"margin-left:0in;text-align:right;\">Motor voltage:\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:15.6pt;padding:0in;vertical-align:top;width:212.05pt;\">\u003Cp style=\"margin-left:59.25pt;\">120VAC or 230VAC\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:15.55pt;padding:0in;vertical-align:top;width:143.75pt;\">\u003Cp style=\"margin-left:0in;text-align:right;\">Rated power:\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:15.55pt;padding:0in;vertical-align:top;width:212.05pt;\">\u003Cp style=\"margin-left:86.2pt;text-align:center;\">550W\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:15.6pt;padding:0in;vertical-align:top;width:143.75pt;\">\u003Cp style=\"margin-left:0in;text-align:right;\">Gate movingspeed:\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:15.6pt;padding:0in;vertical-align:top;width:212.05pt;\">\u003Cp style=\"margin-left:70.05pt;\">20 cm\u002Fs (8 in\u002Fs)\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:15.6pt;padding:0in;vertical-align:top;width:143.75pt;\">\u003Cp style=\"margin-left:0in;text-align:right;\">Max gate weight:\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:15.6pt;padding:0in;vertical-align:top;width:212.05pt;\">\u003Cp style=\"margin-left:65.4pt;\">1500kg (3400lbs)\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:15.6pt;padding:0in;vertical-align:top;width:143.75pt;\">\u003Cp style=\"margin-left:0in;text-align:right;\">Max torque:\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:15.6pt;padding:0in;vertical-align:top;width:212.05pt;\">\u003Cp style=\"margin-left:86.1pt;text-align:center;\">35Nm\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:15.6pt;padding:0in;vertical-align:top;width:143.75pt;\">\u003Cp style=\"margin-left:0in;text-align:right;\">Environmental conditions:\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:15.6pt;padding:0in;vertical-align:top;width:212.05pt;\">\u003Cp style=\"margin-left:39.95pt;\">-20℃~ +50℃ (0°F to 120°F)\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:15.55pt;padding:0in;vertical-align:top;width:143.75pt;\">\u003Cp style=\"margin-left:0in;text-align:right;\">Protection class:\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:15.55pt;padding:0in;vertical-align:top;width:212.05pt;\">\u003Cp style=\"margin-left:86.25pt;text-align:center;\">IP44\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003C\u002Ftbody>\u003C\u002Ftable>\u003C\u002Ffigure>\u003Ch2 style=\"margin-left:0px;\">\u003Cstrong>Features\u003C\u002Fstrong>\u003C\u002Fh2>\u003Cul>\u003Cli>Easy to install, and minimum maintenance requirement\u003C\u002Fli>\u003Cli>Midway mode, Quick selection for gate open\u002Fclose direction\u003C\u002Fli>\u003Cli>Get the desired chain tension by adjusting the chain bolts.\u003C\u002Fli>\u003Cli>Reliable rolling code technology for remote control\u003C\u002Fli>\u003Cli>Emergency release key in case of power failure\u003C\u002Fli>\u003Cli>Stop in case of obstruction during gate opening.\u003C\u002Fli>\u003Cli>Reverse in case of obstruction during gate closing\u003C\u002Fli>\u003Cli>Built in adjustable auto-close (0, 30, 60, 90 seconds)\u003C\u002Fli>\u003Cli>Built in max. Motor Running Time (MRT) for multiple safety protection (90 seconds)\u003C\u002Fli>\u003Cli>Reliable electromagnetism limit for easy adjustment\u003C\u002Fli>\u003Cli>Can be equipped with wide range accessories\u003C\u002Fli>\u003C\u002Ful>\u003Ch2>Description\u003C\u002Fh2>\u003Cp>The Topens CK1200 Sliding Gate Opener is designed with durability and performance in mind. The device is built with high-quality materials that withstand various environmental conditions. It features a sleek and compact design that fits neatly into most gate setups. The opener includes a sturdy gearbox and a high-torque motor, ensuring consistent and reliable operation. Additionally, it comes with a comprehensive set of accessories, including a remote control, wall switch, and mounting hardware, making installation straightforward.\u003C\u002Fp>\u003Ch2 style=\"margin-left:0px;\">\u003Cstrong>Installation Overview\u003C\u002Fstrong>\u003C\u002Fh2>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:805\u002F378;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-13.jpg?ezimgfmt=rs:805x378\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-13\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-13.jpg?ezimgfmt=ng:webp\u002Fngcb1 1524w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-13-550x258.jpg?ezimgfmt=ng:webp\u002Fngcb1 550w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-13-1024x481.jpg?ezimgfmt=ng:webp\u002Fngcb1 1024w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-13-768x361.jpg?ezimgfmt=ng:webp\u002Fngcb1 768w\" sizes=\"100vw\" width=\"805\" height=\"378\" loading=\"lazy\">\u003C\u002Ffigure>\u003Ch3 style=\"margin-left:0px;\">\u003Cstrong>Installation of the Opener\u003C\u002Fstrong>\u003C\u002Fh3>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>Caution\u003C\u002Fstrong>\u003C\u002Fp>\u003Cul>\u003Cli>Be sure that the opener is installed in a level and paralleled position. Improper installation could result in property damage, severe injury, and\u002For death.\u003C\u002Fli>\u003Cli>Before starting installation, ensure that there is no point of friction during the entire movement of the gate and there is no danger of derailment.\u003C\u002Fli>\u003Cli>Ensure that the safety side rollers are present. \u003Cbr>\u003Cstrong>Necessary Tools\u003C\u002Fstrong>: The following tools may be necessary to install the Gate opener. You will need screwdrivers, an electric drill, wire cutters and a wire stripper, a socket set, and possibly access to a welder.\u003C\u002Fli>\u003C\u002Ful>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:633\u002F901;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-14.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-14\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-14.jpg 852w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-14-387x550.jpg 387w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-14-720x1024.jpg 720w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-14-768x1093.jpg 768w\" sizes=\"100vw\" width=\"633\" height=\"901\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cp style=\"margin-left:0px;\">When install the opener, you should build a concrete pad to support the base plate of opener in order to maintain proper stability.\u003C\u002Fp>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>The installation proceeds are as follows:\u003C\u002Fstrong>\u003C\u002Fp>\u003Col>\u003Cli>Assemble the Base Plate and fix the Opener to the Base Plate.\u003C\u002Fli>\u003Cli>Dig a hole for a concrete pad which should be approximately 60 x 32 x 35cm (24〞x 13〞x 14〞).\u003Cbr>It may protrude 10 cm (4”) above ground and 25 cm (10”) in depth underground. Increase the pad height if necessary to protect the system from flooding, heavy snow etc.\u003C\u002Fli>\u003Cli>Prepare one or more conduits for the electrical cables before pour concrete. Remember that cable conduits have to pass through the hole on the base.\u003C\u002Fli>\u003Cli>Pour concrete and before it starts to harden, check that it is parallel to the gate leaf and perfectly level.\u003C\u002Fli>\u003Cli>Mark the position of four expansion anchors according to the position of mounting hole on the base plate. Double check your marking, move the base plate and drill the 4 holes using a 14mm (9\u002F16”) masonry bit. Put the 4 expansion anchors (provided) into the holes and firmly tighten.\u003C\u002Fli>\u003Cli>Mount the base plate to the concrete Pad and firmly tighten, enabling the opener is firmly secured on the concrete pad during the whole gate travel.\u003C\u002Fli>\u003C\u002Fol>\u003Ch2 style=\"margin-left:0px;\">\u003Cstrong>Manual Operation\u003C\u002Fstrong>\u003C\u002Fh2>\u003Cp style=\"margin-left:0px;\">The opener should be put in the manual (emergency release) position before fitting the chain, installing the opener and limit switch. The process is as follows:\u003C\u002Fp>\u003Col>\u003Cli>\u003Cp style=\"margin-left:0px;\">Insert and turn the key clockwise 45° to slide the lock cover. Now the key slot appears.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:647\u002F234;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-15.png\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-15\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-15.png 647w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-15-550x199.png 550w\" sizes=\"100vw\" width=\"647\" height=\"234\" loading=\"lazy\">\u003C\u002Ffigure>\u003C\u002Fli>\u003Cli>\u003Cp style=\"margin-left:0px;\">Insert the T-handle Key (provided) to the key slot and turn it in counter-clockwise 135° to disengage the clutch between the gear shaft and power output. Now the opener is in the manual operation.\u003C\u002Fp>\u003C\u002Fli>\u003C\u002Fol>\u003Ch3 style=\"margin-left:0px;\">\u003Cstrong>Installation of chain and chain brackets\u003C\u002Fstrong>\u003C\u002Fh3>\u003Col>\u003Cli>Chain Brackets\u003Col style=\"list-style-type:decimal;\">\u003Cli>Please refer to below chain brackets figure, which shows “U” bolt, “L” bracket and chain bolt. Use the “U” bolts (square or round) to attach the chain brackets to gate frame.\u003C\u002Fli>\u003Cli>\u003Cp>If Both the square bolts and round bolts are not fit for the gate frame, use the appropriate bolts to attach the chain brackets to gate frame.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:614\u002F467;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-16.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-16\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-16.jpg 786w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-16-550x418.jpg 550w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-16-768x584.jpg 768w\" sizes=\"100vw\" width=\"614\" height=\"467\" loading=\"lazy\">\u003C\u002Ffigure>\u003C\u002Fli>\u003C\u002Fol>\u003C\u002Fli>\u003Cli>How to install the chain\u003Col style=\"list-style-type:decimal;\">\u003Cli>Place the chain around the top of the idler wheels and under the drive sprocket in chain box.\u003C\u002Fli>\u003Cli>Connect a chain bolt to one end of chain from chain box by using master link. Then insert the chain bolt to the L bracket and fix them each other by washers and nuts temporarily. (Nuts will be further adjusted for a proper chain tension later)\u003C\u002Fli>\u003Cli>Connect second chain bolt with another end of chain from chain box, then attach bolt to the L bracket on opposite end of gate using the washers and nuts.\u003C\u002Fli>\u003Cli>Make sure that the chain is line up exactly with the position where the chain on the chain idler wheel.\u003C\u002Fli>\u003Cli>\u003Cp>Remove the unwanted length of chain. Set appropriated chain tension by adjusting two chain bolts of the both end.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:480\u002F662;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-17.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-17\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-17.jpg 534w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-17-399x550.jpg 399w\" sizes=\"100vw\" width=\"480\" height=\"662\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:438\u002F352;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-18.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-18\" width=\"438\" height=\"352\" loading=\"lazy\">\u003C\u002Ffigure>\u003C\u002Fli>\u003Cli>\u003Cp style=\"margin-left:0px;\">The chain brackets must be mounted to the same height as the chain on the idler wheels.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:837\u002F372;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-19.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-19\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-19.jpg 940w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-19-550x245.jpg 550w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-19-768x342.jpg 768w\" sizes=\"100vw\" width=\"837\" height=\"372\" loading=\"lazy\">\u003C\u002Ffigure>\u003C\u002Fli>\u003Cli>\u003Cp style=\"margin-left:0px;\">Make sure there is 1” distance at least between the wheel cover and the gate after you position the base plate.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:890\u002F270;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-20.png\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-20\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-20.png 890w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-20-550x167.png 550w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-20-768x233.png 768w\" sizes=\"100vw\" width=\"890\" height=\"270\" loading=\"lazy\">\u003C\u002Ffigure>\u003C\u002Fli>\u003C\u002Fol>\u003C\u002Fli>\u003C\u002Fol>\u003Ch2 style=\"margin-left:0px;\">\u003Cstrong>Installation of the Magnets\u003C\u002Fstrong>\u003C\u002Fh2>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:690\u002F662;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-21.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-21\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-21.jpg 1180w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-21-550x528.jpg 550w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-21-1024x982.jpg 1024w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-21-768x737.jpg 768w\" sizes=\"100vw\" width=\"690\" height=\"662\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cul>\u003Cli>Before install limit switch, make sure the gate opener is put in manual operation. (the clutch connected with gear shaft is disengaged) and the mains power supply is disconnected.\u003C\u002Fli>\u003Cli>Position the two Magnet Components approximately on the gate and move the gate by hand to fix them in place.\u003C\u002Fli>\u003C\u002Ful>\u003Ch3 style=\"margin-left:0px;\">\u003Cstrong>Fit magnets bracket\u003C\u002Fstrong>\u003C\u002Fh3>\u003Col>\u003Cli>Push the gate fully closed by hand. Locate and install the magnet bracket so that the opener will stop at the desired close position when the close limit switch approaches it.\u003C\u002Fli>\u003Cli>Push the gate fully open by hand. Locate and install the magnet bracket so that the opener will stop at the desired open position when the open limit switch approaches it.\u003C\u002Fli>\u003Cli>The lower magnet bracket must be installed at left side and higher magnet bracket must be installed at right side from the view inside of property. Finally adjust the magnet to the proper position by moving the gate with the motor. The magnet should be 20-30mm (0.8-1.2”) away from the magnetic limit switch. If it is too far away, the switch will fail to work.\u003C\u002Fli>\u003Cli>The distance between the magnet and the opener should be 10-15mm with the opener cover on. Adjust the position of the magnet until the positions of the opening and closing meet the requirement.\u003C\u002Fli>\u003C\u002Fol>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>Warning:\u003C\u002Fstrong> Improper magnets installation may cause the gate crash into end barrier, which is very dangerous !\u003C\u002Fp>\u003Ch3 style=\"margin-left:0px;\">\u003Cstrong>Connecting of Power Supply\u003C\u002Fstrong>\u003C\u002Fh3>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>WARNING:\u003C\u002Fstrong> NEVER connect the gate opener to the power outlet before all the installations have been done.\u003Cbr>The power supply cord should be at least 3×0.75mm2 (3C×18AWG). Connect the live wire and neutral wire to the “L” (1#) and “N” (3#) terminal of the control board respectively; and connect the earth wire to “ ” (2#) terminal of the control board.\u003C\u002Fp>\u003Cfigure class=\"image image_resized\" style=\"width:14.24%;\">\u003Cimg style=\"aspect-ratio:163\u002F176;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-22.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-22\" width=\"163\" height=\"176\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>NOTE:\u003C\u002Fstrong> The power supply cord is not included in the package.\u003C\u002Fp>\u003Ch3 style=\"margin-left:0px;\">\u003Cstrong>Connecting of the Control Board\u003C\u002Fstrong>\u003C\u002Fh3>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>WARNING:\u003C\u002Fstrong> Before making any electrical wire connection or\u002Fand setting the control board, make sure that the power switch is OFF.\u003C\u002Fp>\u003Col>\u003Cli>\u003Cstrong>Motor\u003C\u002Fstrong>\u003Cbr>The BLACK wire of the motor should be connected into the “6” terminal.\u003Cbr>The RED wire of the motor should be connected into the “7” terminal.\u003Cbr>The YELLOW wire of the motor should be connected into the “8” terminal.\u003C\u002Fli>\u003Cli>\u003Cstrong>Start Capacitor\u003C\u002Fstrong>\u003Cbr>One pin of the start capacitor should be wired to the “7” terminal, another to “8” terminal.\u003C\u002Fli>\u003Cli>\u003Cstrong>Limit Switches\u003C\u002Fstrong>\u003Cbr>The RED wire of the limit switches should be connected into the “9” terminal.\u003Cbr>The BLACK wire of the limit switches should be connected into the “10” terminal.\u003Cbr>The YELLOW wire of the limit switches should be connected into the “11” terminal.\u003C\u002Fli>\u003Cli>\u003Cstrong>Warning Light (Included in some models, refers to the actual package)\u003C\u002Fstrong>\u003Cbr>One wire of the warning light should be connected into the “4” terminal, another should be connected into the “5” terminal.\u003C\u002Fli>\u003Cli>\u003Cp>\u003Cstrong>Photocell Beam System (PBS) (NO) (Included in some models, refers to the actual package)\u003C\u002Fstrong>\u003Cbr>Use a 2-core cable to connect the “+ ~” terminal of the photocell’s emitter to the “12” terminal, the “- ~” terminal to the “13” terminal. Also the “+ ~” and “- ~” terminals of the photocell’s receiver should be connected to the “12” and “13” terminals in parallel.\u003Cbr>Use another 2-core cable to connect the “NO” terminal of the receiver to the “14” terminal, the “COM” terminal to the “15” terminal.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:751\u002F1002;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-23.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-23\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-23.jpg 1530w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-23-412x550.jpg 412w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-23-767x1024.jpg 767w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-23-768x1025.jpg 768w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-23-1151x1536.jpg 1151w\" sizes=\"100vw\" width=\"751\" height=\"1002\" loading=\"lazy\">\u003C\u002Ffigure>\u003C\u002Fli>\u003Cli>\u003Cstrong>Reflection Photocell Sensor (optional)\u003C\u002Fstrong>\u003Cbr>The “AC10-25V\u002FDC12-30V” terminals of the reflection photocell sensor should be connected to the “12” and “13” terminals, no matter the polarity.\u003Cbr>The “NO” terminal should be connected to the “14” terminal.\u003Cbr>The “COM” terminal should be connected to the “15” terminal.\u003C\u002Fli>\u003Cli>\u003Cstrong>Push Button (Optional)\u003C\u002Fstrong>\u003Cbr>The push button should be wired to the “15” and “16” terminals. The gate opener works alternately by pushing the button (open-stop-close-stop-open).\u003C\u002Fli>\u003Cli>\u003Cstrong>Exit Wand (Optional)\u003C\u002Fstrong>\u003Cbr>First insert the Adapter BOARD into the CONTROL BOARD, and then connect the wand to the control board refers to following instruction.\u003Cbr>The BLACK wire of the exit wand should be connected into the “#18” terminal.\u003Cbr>The BLUE wire of the exit wand should be connected into the “#17” terminal.\u003Cbr>The RED wire of the exit wand should be connected into the “#12” terminal.\u003Cbr>The GREEN wire of the exit wand should be connected into the “#13” terminal.\u003Cbr>The sensitivity adjustment board should be wired to the GREEN wire and the YELLOW wire of the wand. No matter the polarity.\u003C\u002Fli>\u003Cli>\u003Cstrong>External Receiver (Optional)\u003C\u002Fstrong>\u003Cbr>The BROWN wire of the external receiver should be connected into the “16” terminal.\u003Cbr>The BLACK wire of the external receiver should be connected into the “13” terminal.\u003Cbr>The RED wire of the external receiver should be connected into the “12” terminal.\u003C\u002Fli>\u003Cli>\u003Cstrong>Wired Keypad (12VDC) (Optional)\u003C\u002Fstrong>\u003Cbr>The RED wire of the wired keypad should be connected into the “12” terminal.\u003Cbr>The BLACK wire of the wired keypad should be connected into the “13” terminal.\u003Cbr>The PURPLE wire of the wired keypad should be connected into the “16” terminal.\u003Cbr>The BLUE wire of the wired keypad should be connected into the “15” terminal.\u003C\u002Fli>\u003Cli>\u003Cstrong>HomeLink Remote Control Kit (optional)\u003C\u002Fstrong>\u003Cbr>The “1” terminal should be connected to the “15” terminal.\u003Cbr>The “2” terminal should be connected to the “16” terminal.\u003Cbr>The “DC+” terminal should be connected to the “12” terminal.\u003Cbr>The “DC-” terminal should be connected to the “13” terminal.\u003C\u002Fli>\u003C\u002Fol>\u003Ch2>Setup Guide\u003C\u002Fh2>\u003Cp>Setting up the Topens Sliding Gate Opener CK1200 is relatively straightforward. Here’s a brief guide to get you started:\u003C\u002Fp>\u003Col>\u003Cli>\u003Cstrong>Assemble the Gate Opener:\u003C\u002Fstrong> Attach the motor unit to the gate and secure it firmly using the provided mounting hardware.\u003C\u002Fli>\u003Cli>\u003Cstrong>Connect Power and Control Devices:\u003C\u002Fstrong> Connect the power supply and attach the remote control receiver to the motor unit.\u003C\u002Fli>\u003Cli>\u003Cstrong>Configure Settings:\u003C\u002Fstrong> Adjust the limit switches to define the open and close positions of your gate.\u003C\u002Fli>\u003Cli>\u003Cstrong>Pair Remote Controls:\u003C\u002Fstrong> Pair the remote controls with the receiver following the instructions provided in the user manual.\u003C\u002Fli>\u003C\u002Fol>\u003Ch2 style=\"margin-left:0px;\">\u003Cstrong>Maintenance\u003C\u002Fstrong>\u003C\u002Fh2>\u003Cp style=\"margin-left:0px;\">Every six months check the following items for proper operation of the unit.\u003C\u002Fp>\u003Cul>\u003Cli>Lubricate shafts and sprockets.\u003C\u002Fli>\u003Cli>Keep opener clean at all times.\u003C\u002Fli>\u003Cli>Check and tighten anchors bolts.\u003C\u002Fli>\u003Cli>Check for loose or corroded wire\u003C\u002Fli>\u003Cli>Ensure the opener is well earthed, and correctly terminated.\u003C\u002Fli>\u003Cli>Always check the Stop\u002FReverse in case of obstruction function when performing any maintenance. If this function can’t be made operable, remove this opener from service until the cause of the malfunction is identified and corrected.\u003C\u002Fli>\u003C\u002Ful>\u003Ch2>Setting of the Control Board\u003C\u002Fh2>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>WARNING:\u003C\u002Fstrong> Ensure the gate opener is Power Off when you make any adjustment of the gate opener. Keep away from the gate during you set the gate opener system in case of the unexpected gate moving. Carefully adjust the DIP switches to avoid the risk of machine damage and injury or death. Always ask the help of professional technician \u002Felectrician if you have any question.\u003C\u002Fp>\u003Col>\u003Cli>\u003Cp>\u003Cstrong>DIP Switches\u003C\u002Fstrong>\u003Cbr>The DIP switches are used to set the running time of the motor in midway mode, auto close time of the gate opener and fast change the open\u002Fclose direction which is determined by the position of the gate opener installed.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:881\u002F412;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-24.jpg?ezimgfmt=rs:881x412\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"ngcb1\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-24.jpg?ezimgfmt=ng:webp\u002Fngcb1 881w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-24-550x257.jpg?ezimgfmt=ng:webp\u002Fngcb1 550w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-24-768x359.jpg?ezimgfmt=ng:webp\u002Fngcb1 768w\" sizes=\"100vw\" width=\"881\" height=\"412\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cul>\u003Cli>\u003Cp>\u003Cstrong>DIP Switch #1–#2: \u003C\u002Fstrong>Running time of the motor in Midway Mode\u003Cbr>This mode enables user to drive the vehicle through the gate quickly when the gate opens to certain width.\u003C\u002Fp>\u003Cul>\u003Cli>\u003Cstrong>DIP Switch #\u003C\u002Fstrong>1: ON – 4 Seconds OFF – 0\u003C\u002Fli>\u003Cli>\u003Cstrong>DIP Switch #2\u003C\u002Fstrong>: ON – 2 Seconds OFF – 0\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>NOTE\u003C\u002Fstrong>: The midway mode function would be disabled if both DIP switches are turned off. Factory default setting is disabled. The midway mode could be activated by pressing button B of the remote control when the gate is in the full closed position.\u003Cbr>E.g. \u003Cimg style=\"height:auto;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-25.jpg?ezimgfmt=rs:88x61\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-25\" width=\"88\" height=\"61\" loading=\"lazy\">→Running time of the operator in midway mode is 4+2=6 seconds.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:975\u002F231;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-26.jpg?ezimgfmt=rs:975x231\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-26\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-26.jpg?ezimgfmt=ng:webp\u002Fngcb1 1469w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-26-550x130.jpg?ezimgfmt=ng:webp\u002Fngcb1 550w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-26-1024x243.jpg?ezimgfmt=ng:webp\u002Fngcb1 1024w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-26-768x182.jpg?ezimgfmt=ng:webp\u002Fngcb1 768w\" sizes=\"100vw\" width=\"975\" height=\"231\" loading=\"lazy\">\u003C\u002Ffigure>\u003C\u002Fli>\u003Cli>\u003Cp>\u003Cstrong>DIP Switch #3–#4\u003C\u002Fstrong>: Auto close time of the gate opener\u003C\u002Fp>\u003Cul>\u003Cli>\u003Cstrong>DIP Switch #3:\u003C\u002Fstrong> ON – 30 Seconds OFF – 0\u003C\u002Fli>\u003Cli>\u003Cstrong>DIP Switch #4: \u003C\u002Fstrong>ON – 60 Seconds OFF – 0\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>NOTE:\u003C\u002Fstrong> The auto close function would be disabled if both dip switches are turned to off (factory default setting).\u003Cbr>E.g. \u003Cimg class=\"image_resized\" style=\"aspect-ratio:119\u002F82;width:5.48%;\" src=\"https:\u002F\u002Fmanualsfact.com\u002Fmedia\u002Fposts\u002F66e9573aca1f047e1be00c6f\u002Fe.g.png\" alt=\"e.g.png\" width=\"119\" height=\"82\" loading=\"lazy\">→Auto close time of the gate operator is 30+60=90 seconds.\u003Cbr>\u003Cstrong>Important Note:\u003C\u002Fstrong> When the auto close function is enabled, the photocell sensor is highly recommended to be installed with the gate opener for safety.\u003Cbr>\u003Cstrong>DIP Switch #5:\u003C\u002Fstrong> Left\u002FRight open\u003C\u002Fp>\u003Cul>\u003Cli>ON – Right open (factory default setting).\u003C\u002Fli>\u003Cli>\u003Cp>OFF – Left open. Turn switch OFF to change the opening direction easy if necessary.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:1269\u002F298;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-28.jpg?ezimgfmt=rs:1252x294\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-28\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-28.jpg?ezimgfmt=ng:webp\u002Fngcb1 1524w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-28-550x129.jpg?ezimgfmt=ng:webp\u002Fngcb1 550w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-28-1024x241.jpg?ezimgfmt=ng:webp\u002Fngcb1 1024w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-28-768x180.jpg?ezimgfmt=ng:webp\u002Fngcb1 768w\" sizes=\"100vw\" width=\"1269\" height=\"298\" loading=\"lazy\">\u003C\u002Ffigure>\u003C\u002Fli>\u003C\u002Ful>\u003C\u002Fli>\u003C\u002Ful>\u003C\u002Fli>\u003Cli>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>Potentiometers\u003C\u002Fstrong>\u003Cbr>The potentiometer A is to adjust the OPEN stall force of the gate opener. The Potentiometer B is used to adjust the CLOSE stall force of the gate opener.\u003Cbr>Turn the potentiometer clockwise to increase the stall force.\u003Cbr>Turn the potentiometer counter-clockwise to decrease the stall force.\u003C\u002Fp>\u003Cfigure class=\"image image_resized\" style=\"width:61.14%;\">\u003Cimg style=\"aspect-ratio:727\u002F316;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-29.jpg?ezimgfmt=rs:727x316\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-29\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-29.jpg?ezimgfmt=ng:webp\u002Fngcb1 870w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-29-550x239.jpg?ezimgfmt=ng:webp\u002Fngcb1 550w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-29-768x334.jpg?ezimgfmt=ng:webp\u002Fngcb1 768w\" sizes=\"100vw\" width=\"727\" height=\"316\" loading=\"lazy\">\u003C\u002Ffigure>\u003C\u002Fli>\u003C\u002Fol>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>WARNING:\u003C\u002Fstrong> Photocell is highly recommended to be installed with the gate opener as entrapment protection for safety when you set stall force to maximum.\u003C\u002Fp>\u003Ch3 style=\"margin-left:0px;\">\u003Cstrong>How to Program or Erase the Remote\u003C\u002Fstrong>\u003C\u002Fh3>\u003Cul>\u003Cli>The remote MUST be programed to the opener BEFORE OPERATING. Please follow the steps to program the remote.\u003C\u002Fli>\u003Cli>Activate the opener only when gate is in full view, free of obstruction and properly adjusted. No one should enter or leave gate area while gate is in motion. DO NOT ALLOW CHILDREN to operate push button or remote. DO NOT ALLOW CHILDREN TO PLAY NEAR THE GATE.\u003C\u002Fli>\u003Cli>If you purchase additional remote controls, the gate opener must be programmed to accept the new remote code.\u003C\u002Fli>\u003Cli>If you lose one of any remote control, please erase and reprogram all other remote controls to have a new code for safety.\u003C\u002Fli>\u003C\u002Ful>\u003Ch3 style=\"margin-left:0px;\">\u003Cstrong>Program the remote\u003C\u002Fstrong>\u003C\u002Fh3>\u003Cp style=\"margin-left:0px;\">Press and release the learn button, the REM LED light will be on, then press the key on the remote two times in 2 seconds, between the two times HOLD ON FOR A MOMENT, the REM LED light will flash for 4 seconds. Now the remote has been programmed successfully.\u003C\u002Fp>\u003Cfigure class=\"image image_resized\" style=\"width:49.14%;\">\u003Cimg style=\"aspect-ratio:581\u002F211;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-30.jpg?ezimgfmt=rs:581x211\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-30\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-30.jpg?ezimgfmt=ng:webp\u002Fngcb1 581w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-30-550x200.jpg?ezimgfmt=ng:webp\u002Fngcb1 550w\" sizes=\"100vw\" width=\"581\" height=\"211\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>Erase all the remote codes\u003C\u002Fstrong>\u003Cbr>Press and hold the learn button until the REM LED light is off. Now all remote codes have been erased.\u003C\u002Fp>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>NOTE:\u003C\u002Fstrong> Max. 8 remotes can be programmed for the opener. An External Receiver (optional) allows up to 250pcs remotes to be programmed for the opener. TOPENS ERM12 Universal External Receiver is available at TOPENS Store.\u003C\u002Fp>\u003Cp style=\"margin-left:0px;\">TOPENS ERM12 Universal External Receiver is also compatible with other brand swing gate opener, sliding gate opener and garage door opener.\u003C\u002Fp>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>How to Use the Remote to Operate Your Gate Opener\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp style=\"margin-left:0px;\">Each remote has four buttons, from top to bottom are separately A, B, C and D. You may use this remote to operate as many as 4 sets TOPENS swing gate openers or 1 set TOPENS sliding gate opener and 2 sets TOPENS swing gate openers.\u003C\u002Fp>\u003Cfigure class=\"image image_resized\" style=\"width:16.78%;\">\u003Cimg style=\"aspect-ratio:213\u002F315;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-31.jpg?ezimgfmt=rs:213x315\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-31\" width=\"213\" height=\"315\" loading=\"lazy\">\u003C\u002Ffigure>\u003Col>\u003Cli>\u003Cp style=\"margin-left:0px;\">Use this remote to only operate TOPENS swing gate opener A, B, C and D four buttons share same function once they are programmed with TOPENS swing gate opener. You may choose any button to program it with our swing gate opener. Every press of the button is able to active the gate opener to work alternately (open-stop-close-stop-open).\u003C\u002Fp>\u003C\u002Fli>\u003Cli>\u003Cp style=\"margin-left:0px;\">Use one remote to operate TOPENS swing gate opener & sliding gate opener at the same time All of TOPENS sliding gate opener have midway mode. Button B is designed to realize midway function (refer to more details in our TOPENS sliding gate opener manual). So it is must program button A with sliding gate opener, while you may program either C button or D button with TOPENS swing gate opener.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:926\u002F336;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-32.jpg?ezimgfmt=rs:926x336\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-32\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-32.jpg?ezimgfmt=ng:webp\u002Fngcb1 1111w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-32-550x200.jpg?ezimgfmt=ng:webp\u002Fngcb1 550w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-32-1024x371.jpg?ezimgfmt=ng:webp\u002Fngcb1 1024w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-32-768x279.jpg?ezimgfmt=ng:webp\u002Fngcb1 768w\" sizes=\"100vw\" width=\"926\" height=\"336\" loading=\"lazy\">\u003C\u002Ffigure>\u003C\u002Fli>\u003C\u002Fol>\u003Ch3 style=\"margin-left:0px;\">\u003Cstrong>Wireless Keypad Programming\u003C\u002Fstrong>\u003C\u002Fh3>\u003Cul>\u003Cli>\u003Cp style=\"margin-left:0px;\">You can follow the below steps to program wireless keypad to the opener. Press the LNSW button until the REM LED is ON, and then releases the button. Then press “OK” button on keypad and REM LED will flash for 3 seconds and then be OFF which indicates the keypad has been programmed successfully. You can use the default password “888888” to operate the opener after programming. You can press “PIN” “8 8 8 8 8 8” and then press “OK” to confirm to operate the opener.\u003C\u002Fp>\u003C\u002Fli>\u003Cli>\u003Cp style=\"margin-left:0px;\">Also you can change the password of the keypad follow the below steps. Press “PIN” and then input the six digits old password and then press ”PIN” again, the REM LED will be ON. Input the six digits new password and then press the “PIN” to confirm the new setting, REM LED will flash for 3 seconds and then be OFF which indicates the password has been changed successfully. You can press “PIN” “6 digits new password” and then press “OK” to confirm to operate the opener.\u003C\u002Fp>\u003C\u002Fli>\u003C\u002Ful>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>NOTE:\u003C\u002Fstrong> Every step for pressing button during program must be finished within 1 second to ensure successful programming.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:523\u002F220;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-03.jpg?ezimgfmt=rs:523x220\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-03\" width=\"523\" height=\"220\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cp style=\"margin-left:0px;\">We are sure that the products will be greatly satisfying as soon as you start to use it.\u003Cbr>The product is supplied with a user’s manual which encloses installation and safety precautions. These should be read carefully before installation and operation as they provide important information about safety, installation, operation and maintenance. This product complies with the recognized technical standards and safety regulations.\u003C\u002Fp>\u003Ch3 style=\"margin-left:0px;\">\u003Cstrong>Check Your Gate before Installation\u003C\u002Fstrong>\u003C\u002Fh3>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:527\u002F223;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-04.jpg?ezimgfmt=rs:527x223\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-04\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-04.jpg?ezimgfmt=ng:webp\u002Fngcb1 1170w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-04-550x233.jpg?ezimgfmt=ng:webp\u002Fngcb1 550w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-04-1024x433.jpg?ezimgfmt=ng:webp\u002Fngcb1 1024w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-04-768x325.jpg?ezimgfmt=ng:webp\u002Fngcb1 768w\" sizes=\"100vw\" width=\"527\" height=\"223\" loading=\"lazy\">\u003C\u002Ffigure>\u003Ch3 style=\"margin-left:0px;\">\u003Cstrong>General Safety\u003C\u002Fstrong>\u003C\u002Fh3>\u003Cp style=\"margin-left:0px;\">\u003Cstrong>WARNING!\u003C\u002Fstrong> An incorrect installation or improper use of the product can cause damage to persons, animals or properties.\u003C\u002Fp>\u003Cul>\u003Cli>Scrap packing materials (plastic, cardboard, polystyrene etc.) according to the provisions set out by current standards. Keep nylon or polystyrene bags out of children’s reach.\u003C\u002Fli>\u003Cli>This product was exclusively designed and manufactured for the use specified in the present documentation. Any other use not specified in this documentation could damage the product and be dangerous.\u003C\u002Fli>\u003Cli>The factory declines all responsibility for any consequences resulting from improper use of the product, or use which is different from that expected and specified in the present documentation.\u003C\u002Fli>\u003Cli>Do not install the product in explosive atmosphere.\u003C\u002Fli>\u003Cli>The factory declines all responsibility for any consequences resulting from failure to observe Good Technical Practice when constructing closing structures (door, gates etc.), as well as from any deformation which might occur during use.\u003C\u002Fli>\u003Cli>Disconnect the electrical power supply before carrying out any work on the installation. Also disconnect any buffer batteries, if fitted.\u003C\u002Fli>\u003Cli>Fit an omnipolar or magnetothermal switch on the mains power supply, having a contact opening distance equal to or greater than 3,5 mm.\u003C\u002Fli>\u003Cli>Make sure a residual current circuit breaker with a 30mA threshold is fitted before the power supply mains.\u003C\u002Fli>\u003Cli>Check that earthing is carried out correctly: connect all metal parts for closure (doors, gates etc.) and all system components provided with an earth terminal.\u003C\u002Fli>\u003Cli>Fit all the safety devices (photocells, electric edges etc.) which are needed to protect the area from any danger caused by squashing, conveying and shearing.\u003C\u002Fli>\u003Cli>\u003Cp>Position at least one visible indication device, and fix a Warning sign to the structure.\u003C\u002Fp>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:849\u002F274;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-05.jpg\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-05\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-05.jpg 1276w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-05-550x178.jpg 550w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-05-1024x331.jpg 1024w, https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-05-768x248.jpg 768w\" sizes=\"100vw\" width=\"849\" height=\"274\" loading=\"lazy\">\u003C\u002Ffigure>\u003C\u002Fli>\u003Cli>The factory declines all responsibility with respect to the automation safety and correct operation when other supplier’s components are used.\u003C\u002Fli>\u003Cli>Only use original parts for any maintenance or repair operation.\u003C\u002Fli>\u003Cli>Do not modify the automation components, unless explicitly authorized by the factory.\u003C\u002Fli>\u003Cli>Instruct the product user about the control systems provided and the manual opening operation in case of emergency.\u003C\u002Fli>\u003Cli>Do not allow persons or children to remain in the automation operation area.\u003C\u002Fli>\u003Cli>Keep radio control or other control devices out of children’s reach, in order to avoid unintentional automation activation.\u003C\u002Fli>\u003Cli>The user must avoid any attempt to carry out work or repair on the automation system, and always request the assistance of qualified personnel.\u003C\u002Fli>\u003Cli>Anything which is not expressly provided for in the present instructions is not allowed.\u003C\u002Fli>\u003Cli>Before installing the gate opener, check that all moving part as well as the sliding gate is in good mechanical condition, correctly balanced and opens and closes properly.\u003C\u002Fli>\u003C\u002Ful>\u003Cp style=\"margin-left:0px;\">Save these instructions for future use.\u003C\u002Fp>\u003Ch2 style=\"margin-left:0px;\">\u003Cstrong>Troubleshooting\u003C\u002Fstrong>\u003C\u002Fh2>\u003Cfigure class=\"image\" style=\"height:auto;\">\u003Cimg style=\"aspect-ratio:801\u002F125;\" src=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-33.jpg?ezimgfmt=rs:801x125\u002Frscb1\u002Fng:webp\u002Fngcb1\" alt=\"TOPENS-CK1200-Sliding-Gate-Opener-33\" srcset=\"https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-33.jpg?ezimgfmt=ng:webp\u002Fngcb1 801w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-33-550x86.jpg?ezimgfmt=ng:webp\u002Fngcb1 550w,https:\u002F\u002Fmanuals.plus\u002Fwp-content\u002Fuploads\u002F2022\u002F10\u002FTOPENS-CK1200-Sliding-Gate-Opener-33-768x120.jpg?ezimgfmt=ng:webp\u002Fngcb1 768w\" sizes=\"100vw\" width=\"801\" height=\"125\" loading=\"lazy\">\u003C\u002Ffigure>\u003Cp style=\"margin-left:0px;\">Have a multimeter to check voltage and continuity. Use caution when checking high voltage terminals.\u003C\u002Fp>\u003Cfigure class=\"table\">\u003Ctable>\u003Ctbody>\u003Ctr>\u003Ctd style=\"border:1.0pt solid black;height:89.1pt;padding:0in;vertical-align:top;width:113.4pt;\">\u003Cp> \u003C\u002Fp>\u003Cp> \u003C\u002Fp>\u003Cp style=\"margin-left:5.4pt;text-align:justify;\">The opener does not run. Power LED is OFF.\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:none;border-right-style:solid;border-top-style:solid;border-width:1.0pt;height:89.1pt;padding:0in;vertical-align:top;width:367.0pt;\">\u003Col>\u003Cli>Check the inputvoltage of the control board.It should be local AC electricity.\u003C\u002Fli>\u003Cli>The power switch is OFF. Makesure the powerswitch is ON.\u003C\u002Fli>\u003Cli>Check the fuse in the controlboard. Replace the fuse if it was burnt out.\u003C\u002Fli>\u003Cli>Check the control board.Replace the controlboard as necessary.\u003C\u002Fli>\u003C\u002Fol>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:180.1pt;padding:0in;vertical-align:top;width:113.4pt;\">\u003Cp> \u003C\u002Fp>\u003Cp> \u003C\u002Fp>\u003Cp> \u003C\u002Fp>\u003Cp> \u003C\u002Fp>\u003Cp> \u003C\u002Fp>\u003Cp style=\"margin-left:5.4pt;text-align:justify;\">The opener does not run. Power LED is ON.\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:180.1pt;padding:0in;vertical-align:top;width:367.0pt;\">\u003Col>\u003Cli>\u003Cp style=\"text-align:justify;\">Ensure the remote control has been programmed to the control board before operating.\u003C\u002Fp>\u003C\u002Fli>\u003Cli>\u003Cp style=\"text-align:justify;\">The thermal protector is working because the high temperature after long working time. Please wait for 20 minutes to let the motor become cold.\u003C\u002Fp>\u003C\u002Fli>\u003Cli>\u003Cp style=\"text-align:justify;\">Check the installing position of the magnets. The opener would not run if both of the limit switches are activated by one magnet.\u003C\u002Fp>\u003C\u002Fli>\u003Cli>\u003Cp style=\"text-align:justify;\">Check the limit switch. Remove the wire connection of the limit switch which is connected to the 9#, 10#, and 11# terminals of the controlboard and then try it again. Replace the limit switch if the motor could run in both directions.\u003C\u002Fp>\u003C\u002Fli>\u003Cli>\u003Cp style=\"text-align:justify;\">Check the controlboard. Replace the control boardas necessary.\u003C\u002Fp>\u003C\u002Fli>\u003C\u002Fol>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:117.7pt;padding:0in;vertical-align:top;width:113.4pt;\">\u003Cp> \u003C\u002Fp>\u003Cp> \u003C\u002Fp>\u003Cp> \u003C\u002Fp>\u003Cp style=\"margin-left:5.4pt;\">Remote controldoes not work.\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:117.7pt;padding:0in;vertical-align:top;width:367.0pt;\">\u003Col>\u003Cli>The indicator light of remote control is not on. Check the battery in your remote control. Replace the battery as necessary.\u003C\u002Fli>\u003Cli>The distance you use the remote is too far away from the opener. Try it again closer.\u003C\u002Fli>\u003Cli>Remote control is not suitable for receiver. Aftermaking sure the codes are correct, erase remote controls and then re-program the codes in the device.\u003C\u002Fli>\u003Cli>Check the control board.Replace the controlboard as necessary.\u003C\u002Fli>\u003C\u002Fol>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:86.5pt;padding:0in;vertical-align:top;width:113.4pt;\">\u003Cp> \u003C\u002Fp>\u003Cp style=\"margin-left:5.4pt;text-align:justify;\">The gate starts but it isimmediately stop or reverse\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:86.5pt;padding:0in;vertical-align:top;width:367.0pt;\">\u003Col>\u003Cli>The opening forceor closing forceis adjusted too small. Turn the Potentiometer A&B to increase the force.\u003C\u002Fli>\u003Cli>Disconnect the gate from the gate opener and check that the gate slides freely without any binding.\u003C\u002Fli>\u003Cli>Check the controlboard. Replace the control boardas necessary.\u003C\u002Fli>\u003C\u002Fol>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:117.65pt;padding:0in;vertical-align:top;width:113.4pt;\">\u003Cp> \u003C\u002Fp>\u003Cp> \u003C\u002Fp>\u003Cp> \u003C\u002Fp>\u003Cp style=\"margin-left:5.4pt;text-align:justify;\">The gate opens, but stops and will not return.\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:117.65pt;padding:0in;vertical-align:top;width:367.0pt;\">\u003Col>\u003Cli>\u003Cp style=\"text-align:justify;\">Check the installing position of the magnets. The opener would not run if both of the limit switches are activated by one magnet.\u003C\u002Fp>\u003C\u002Fli>\u003Cli>\u003Cp style=\"text-align:justify;\">Check the limit switch. Remove the wire connection of the limit switch which is connected to the 9#, 10#, and 11# terminals of the controlboard and then try it again. Replace the limit switch if the motor could run in both directions.\u003C\u002Fp>\u003C\u002Fli>\u003Cli>\u003Cp style=\"text-align:justify;\">Check the controlboard. Replace the control boardas necessary.\u003C\u002Fp>\u003C\u002Fli>\u003C\u002Fol>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:102.1pt;padding:0in;vertical-align:top;width:113.4pt;\">\u003Cp> \u003C\u002Fp>\u003Cp> \u003C\u002Fp>\u003Cp> \u003C\u002Fp>\u003Cp style=\"margin-left:5.4pt;\">The gate can open, but fails to close.\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:102.1pt;padding:0in;vertical-align:top;width:367.0pt;\">\u003Col>\u003Cli>\u003Cp style=\"text-align:justify;\">Photocell is obstructed. Remove obstruction.\u003C\u002Fp>\u003C\u002Fli>\u003Cli>\u003Cp style=\"text-align:justify;\">Check the limit switch. Remove the wire connection of the limit switch which is connected to the 9#, 10#, and 11# terminals of the controlboard and then try it again. Replace the limit switch if the motor could run in both directions.\u003C\u002Fp>\u003C\u002Fli>\u003Cli>\u003Cp style=\"text-align:justify;\">Check the controlboard. Replace the control boardif necessary.\u003C\u002Fp>\u003C\u002Fli>\u003C\u002Fol>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd style=\"border-bottom-style:solid;border-color:black;border-left-style:solid;border-right-style:solid;border-top-style:none;border-width:1.0pt;height:47.0pt;padding:0in;vertical-align:top;width:113.4pt;\">\u003Cp style=\"margin-left:5.4pt;\">The motor runsbut the      gate      doesn’t\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd style=\"border-bottom:1.0pt solid black;border-left-style:none;border-right:1.0pt solid black;border-top-style:none;height:47.0pt;padding:0in;vertical-align:top;width:367.0pt;\">\u003Cp style=\"margin-left:5.4pt;\">Ensure the clutch for emergency releaseis adjusted properly and is not slipping.\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003C\u002Ftbody>\u003C\u002Ftable>\u003C\u002Ffigure>\u003Ch2>Pros & Cons\u003C\u002Fh2>\u003Ch3>Pros\u003C\u002Fh3>\u003Cul>\u003Cli>\u003Cstrong>Reliable Performance:\u003C\u002Fstrong> Consistent and smooth gate operation.\u003C\u002Fli>\u003Cli>\u003Cstrong>Durable Construction:\u003C\u002Fstrong> Built to withstand various environmental conditions.\u003C\u002Fli>\u003Cli>\u003Cstrong>Easy Installation:\u003C\u002Fstrong> Comprehensive installation kit and user-friendly instructions.\u003C\u002Fli>\u003Cli>\u003Cstrong>Multiple Control Options:\u003C\u002Fstrong> Compatible with remote controls, wall switches, and smart home systems.\u003C\u002Fli>\u003Cli>\u003Cstrong>Safety Features:\u003C\u002Fstrong> Automatic reversal and manual release mechanism for added safety.\u003C\u002Fli>\u003C\u002Ful>\u003Ch3>Cons\u003C\u002Fh3>\u003Cul>\u003Cli>\u003Cstrong>Price:\u003C\u002Fstrong> May be more expensive compared to basic gate openers.\u003C\u002Fli>\u003Cli>\u003Cstrong>Complexity:\u003C\u002Fstrong> Requires some technical knowledge for advanced configuration.\u003C\u002Fli>\u003Cli>\u003Cstrong>Noisy Operation:\u003C\u002Fstrong> Some users report a slight noise during operation.\u003C\u002Fli>\u003Cli>\u003Cstrong>Battery Life:\u003C\u002Fstrong> Remote batteries may need frequent replacements if used extensively.\u003C\u002Fli>\u003C\u002Ful>\u003Ch2>Customer Reviews\u003C\u002Fh2>\u003Cp>Customers have generally praised the Topens Sliding Gate Opener CK1200 for its reliability and ease of use. Many have noted that the installation process, while requiring some effort, is manageable with the provided instructions. Some common complaints include the slight noise during operation and the need for frequent battery replacements in the remote controls.\u003C\u002Fp>\u003C\u002Fbody>\u003C\u002Fhtml>","published",{"_id":115,"name":116,"slug":116,"logo_url":117,"id":115},"66347ea5d2714429565649e9","topens",null,[119,121,125,128,132],{"_id":120,"name":116,"slug":116,"id":120},"66347f4c1e2b4b8420bd4eaf",{"_id":122,"name":123,"slug":124,"id":122},"65b9a88a00650ab013966931","user manual","user-manual",{"_id":126,"name":127,"slug":127,"id":126},"66347da91e2b4b8420bd4e3f","sliding",{"_id":129,"name":130,"slug":131,"id":129},"6635e40681da16d399d7274a","gate opener","gate-opener",{"_id":133,"name":134,"slug":134,"id":133},"66e9573aca1f047e1be00c6d","ck1200","2024-09-17T10:17:30.912Z","short",[138,141,144,147,150,153,156,159,162,165],{"question":139,"answer":140},"What is the maximum weight and length of the gate that the Topens can handle?","The Topens CK1200 can handle gates up to 1200 pounds in weight and 40 feet in length.",{"question":142,"answer":143},"Does the Topens Sliding Gate Opener CK1200 come with a warranty?","Topens Opener typically comes with a 2-year warranty on parts and labor.",{"question":145,"answer":146},"Can I use the Topens with my smart home system?","Topens Sliding Gate Opener is compatible with various smart home systems, allowing for seamless integration and remote control through your smart home app.",{"question":148,"answer":149},"How do I troubleshoot issues with my Topens CK1200 if it stops working?","First, check the power supply and ensure all connections are secure. Refer to the user manual for troubleshooting steps or contact customer support if the issue persists.",{"question":151,"answer":152},"Is the Topens Opener  suitable for heavy use?","Topens Sliding Gate Opener is designed for heavy-duty use and can handle frequent opening and closing of heavy gates.",{"question":154,"answer":155},"Can I install the Topens CK1200 myself or should I hire a professional?","While it is possible to install the Topens yourself, it is recommended to hire a professional if you are not comfortable with the installation process.",{"question":157,"answer":158},"How long does it take for the gate to open or close using the Topens CK1200?","The gate opens or closes at a speed of approximately 12 inches per second, which means a 40-foot gate would take about 40 seconds to fully open or close.",{"question":160,"answer":161},"Does the Topens have any safety features?","Topens Sliding Gate Opener CK1200 includes automatic reversal upon encountering obstacles and a manual release mechanism for added safety.",{"question":163,"answer":164},"Can I use solar power to operate the Topens Sliding Gate Opener?","Topens Sliding Gate Opener CK1200 can be powered by a solar panel kit, which is available as an optional accessory.",{"question":166,"answer":167},"How many remote controls come with the Topens CK1200 package?","The standard package includes two remote controls, but additional remotes can be purchased separately if needed.",false,"2024-09-17T10:17:30.913Z","2026-10-19T08:13:04.025Z","posts\u002F66e9573aca1f047e1be00c6f\u002Fpdf\u002Fsliding_gate_opener_ck1200_user_manual.pdf","Discover the topens Sliding Gate Opener CK1200, a premier choice for secure and efficient gate automation.","https:\u002F\u002Fmanualsfact.com\u002Fmedia\u002Fposts\u002F66e9573aca1f047e1be00c6f\u002Fpdf\u002Fsliding_gate_opener_ck1200_user_manual.pdf","topens - Sliding Gate Opener CK1200",[176,180],{"title":177,"full_title":178,"slug":179},"Linear Actuator 24V Swing Gate Opener AT6132S","Topens Linear Actuator 24V Swing Gate Opener AT6132S User Manual","topens-swing-gate-opener-at6132s-installation",{"title":181,"full_title":182,"slug":183},"Garage Door Opener Keypad TC175P Guide","Topens Garage Door Opener Keypad TC175P Guide User Manual","topens-garage-door-opener-keypad-tc175p-guide",[185],{"name":123,"slug":124},{"statusCode":4,"message":187,"data":188},"Found all comments!",[]]