Introduction

The Waterpik Sonic-Fusion SF-02 is an innovative dental care device that combines the functionality of a toothbrush and a water flosser into one convenient product. Designed to enhance oral hygiene, it allows users to brush and floss simultaneously, promoting healthier gums and cleaner teeth. With multiple pressure settings and a sleek design, the Sonic-Fusion aims to simplify daily dental routines. The cost of the Waterpik Sonic-Fusion SF-02 is approximately $199.99.

Detailed Specifications

The Waterpik Sonic-Fusion SF-02 boasts several key features that set it apart from other oral care devices:

• Dual Functionality: Combines the features of a water flosser and an electric toothbrush.
• Brushing Modes: Multiple brushing modes including clean, sensitive, and massage.
• Flossing Pressure Settings: 10 adjustable pressure settings for flossing.
• Timer and Pacer: Built-in timer and pacer to ensure thorough cleaning.
• Rechargeable Battery: Long-lasting rechargeable battery with up to 2 weeks of use on a single charge.
• Ergonomic Design: Ergonomically designed handle for comfortable grip and easy maneuverability.

PRODUCT DESCRIPTION

1. Brush head
2. Water flosser nozzle
3. Hinged Lid
4. Reservoir
5. Water hose
6. Water flosser pressure control dial
7. Water hose release button
8. Toothbrush ON/OFF button
9. Motion activated ring lights*
10. Water flosser ON/OFF button
11. Power handle
12. Toothbrush charge indicator lights
13. Power cord
14. Charging base
15. Indicator Light

Description

The Waterpik Sonic-Fusion SF-02 is designed to provide a comprehensive oral care experience. The device includes a detachable water reservoir that holds up to 60 seconds of flossing time, allowing for uninterrupted cleaning. The electric toothbrush head is interchangeable with various types of brush heads available from Waterpik, ensuring you can customize your cleaning experience based on your dental needs.

The device also features advanced sonic technology that helps remove plaque, food particles, and bacteria more effectively than traditional manual toothbrushes. The combination of water flossing and sonic brushing ensures a deep and thorough cleaning of teeth and gums.

PREPARING THE UNIT / BRUSHING AND FLOSSING

Preparing the Unit

• Powering the Unit 
  Plug the cord into an electrical outlet. If the outlet is controlled by a wall switch, be  sure it is turned on

  

• Attaching the Brush Head to the Power Handle
  Position the brush head on the power handle as shown. Press frmly until it clicks into place. To remove, frmly pull the brush head to separate it from the power handle.

• Attaching the Power Handle to the Hose
  Position the power handle onto hose in the base. Press the power handle frmly onto the hose attachment until it clicks into place. To remove, simply press the round button on the back side of the power handle.

  

• Charging the Sonic-Fusion®
  Charge for at least 20 minutes before frst use by placing the handle on the charging base. For a full charge, leave the handle on the charging base for at least 4 hours. A full charge should last 14 uses with a duration of 2 minutes each. If the toothbrush is to be stored for an extended period of time (six months or more), be sure to fully charge it (at least 4 hours) prior to storage.

  

• Charge Lights
  Toothbrush charge indicator lights will indicate level of battery charge for approximately 10 seconds afer removal from the charging base and afer use, and will then turn of. If only the bottom light is lit, then recharging is recommended to ensure uninterrupted use.

  

• Wireless Connection Light
  Blue light indicates the flosser base unit is communicating via Wireless Communication and is “Ready” for activation via FLOSS button.

  

• Preparing the Reservoir
  Remove reservoir and open hinged lid. Fill the reservoir with warm water. Close the lid and replace the reservoir on the base and press firmly. 

  

• Prime Unit (First Time Use Only)
  Set pressure control dial on base to high (pressure setting No. 10), point the handle and brush head into sink. Press the FLOSS button to turn water ON.   
  After water flows from the nozzle, press the FLOSS button to turn water OFF.  

  

Brush

Place the brush head in your mouth before pressing the BRUSH button.

• Recommended Technique 
  For best results, position brush along gumline at a 45-degree angle. Press the BRUSH button to turn the brush ON. Use light pressure and move the toothbrush slowly allowing for the sonic action to clean each tooth individually. Brush can be easily disconnected from the hose if desired

  

• Quad Timer 
  The Sonic-Fusion will create a short pause every 30 seconds to remind you to move to the next section of your mouth. You will brush the outside of the teeth for 30 seconds and then the inside for 30 seconds. This will be repeated on the other arch for a total of 2 minutes to clean all teeth.

  

• 2-Minute Timer 
  The brush will automatically shut of afer 2 minutes of run time

Floss

Always place the brush head in your mouth prior to pressing the FLOSS button. Lean over the sink and slightly close lips enough to prevent splashing while still allowing water to fow from mouth into sink.

• Adjusting the Pressure Setting 
  Turn the water fosser pressure control dial on the base of the unit to the lowest setting (pressure setting No. 1) for frst-time use. Gradually increase pressure over time to the setting you prefer – or as instructed by your dental professional.

  

• Recommended Technique 
  For best results, start with the back teeth and work toward the front teeth. Direct the brush head so that the water fosser nozzle is angled slightly toward the gumline. Move the brush head along the gumline pausing briefy between each tooth to allow water to clean between teeth. Continue until you have cleaned the inside and outside of both the upper and lower teeth. When fnished, empty any liquid lef in the reservoir NOTE: If you used mouthwash or any other solution besides water, see “Using Mouthwash and Other Solutions” section.

  

• Brush + Floss 
  To Brush + Floss at the same time, place brush head in mouth. Press brush button, then press foss button.

  

Setup Guide

To set up and operate the Waterpik Sonic-Fusion SF-02, follow these steps:

1. Assembly: Attach the brush head to the device handle. Fill the water reservoir with warm water.
2. Configuration: Choose your preferred brushing mode and flossing pressure setting using the control panel.
3. Operation: Place the brush head against your teeth and turn on the device. For flossing, aim the tip between your teeth and along the gumline.
4. Cleaning: Regularly clean the device by rinsing it with warm water and replacing the brush head every 3 months or as recommended.

CARE AND MAINTENANCE

• Travel and Hose-Free Brushing 
  A toothbrush can be disconnected from the Sonic-Fusion® for travel or hose-free brushing. Place the handle and desired brush head(s) in the provided case for protection when traveling. 

  

  NOTE: To disconnect the toothbrush from the water hose, press the round button on the back side of the power handle.

• Using Mouthwash and Other Solutions 
  Your Waterpik Sonic-Fusion can be used to deliver mouthwash and antibacterial solutions. Afer using any special solution, rinse unit to prevent clogging by partially flling reservoir with warm water and running unit with brush head pointed into sink.

  

Before cleaning, unplug from the electrical outlet. 

After Each Use  

1. Afer each use, when all functions are turned OFF, remove the brush head from the handle and rinse brush head and handle under running water.
2. Wipe the handle dry afer each use.
3. Store handle on charger and keep unit plugged in. The unit will not overcharge.

General Cleaning / Removing Hard Water Deposits

• Clean the product when necessary by using a sof cloth and mild non-abrasive cleanser.
• Hard water deposits may build up in your unit, depending on the mineral content of your water. If lef unattended, it can hinder performance. Cleaning internal parts: add 2 tablespoons of white vinegar to a full reservoir of warm water. Point the handle and brush head into sink. Turn Water Flosser ON and run until reservoir is empty. Rinse by repeating with a full reservoir of clean warm water. This process should be done every 1 to 3 months to ensure optimal performance.

Toothbrush Low Charge Lock Out 
The toothbrush charge indicator lights will fash if the battery charge is too low for brushing. This may cause the toothbrush to enter Lock Out mode. To clear the Lock Out, place the power handle on the charging base. 

Leakage 
If leaking due to a damaged hose, replacement hoses can be purchased at http://www.waterpik.com or contact Water Pik Inc. customer service for a self service repair kit. 

Multiple Unit Proximity 
To avoid wireless communication interference when more than one unit will be used in proximity, go to (waterpik.com/MUP) for instruction for changing the base and handle ID.

Battery Removal

This product contains rechargeable Nickle Metal Hydride batteries. 

The batteries are not replaceable

Please do not dispose of the unit in the household waste. Remove the batteries per the instructions below and recycle at your local recycling center 

Note: This process is not reversible Remove the battery only at the end of the product’s life for recycling. Doing so earlier will destroy the product. Deplete the battery charge until the brush no longer operates. Observe basic safety precautions to protect your eyes, hands, fngers, and work surface. Remove the batteries as shown and recycle them and the rest of the product according to local regulations

1. Run down the battery by operating the brush button until the motor does not run.
2. Obtain a towel or cloth, hammer, fat-head screwdriver, and wire cutters.
3. Remove and discard the brush head.
4. Cover the handle entirely with the towel or cloth.
5. Clamp the top of the handle against your work surface with one hand and strike the handle housing around the bottom perimeter on all sides to release the end cap latch. Continue striking and rotating the handle until the end cap releases.

6. Remove the internal components by turning the handle upside down and while holding on to the handle housing, press the shaf down frmly on a hard surface.

   

7. The internal components should slide out when the handle is positioned upside-down. If this does not occur, repeat steps 5 and 6 until the components release.
8. Remove the end cap from the internal assembly.

9. Slide the battery out of the internal assembly.

   

10. Cut the battery wires one at a time with the wire cutters.
11. Recycle and dispose of the battery properly.

12. The remaining product pieces should be discarded appropriately.

    

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USING

• This product is for household use.
• When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: DANGER To reduce the risk of electrocution:
• Do not handle plug with wet hands.
• Do not place in or drop into water or other liquid.
• Do not use while bathing.
• Do not place or store product where it can fall or be pulled into a tub or sink.
• Do not reach for a product that has fallen into water. Unplug immediately.
• Check the power supply cord for damage before the frst use and during the life of the product.
• The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.

WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:

• If product is opened/disassembled for ANY reason, warranty is VOID.
• Do not use this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into any liquid. Contact Water Pik, Inc. or your local distributor which can be found at http://www.waterpik.com./ 
• Do not direct water under the tongue, into the ear, nose or other delicate areas. This product is capable of producing pressures that may cause serious damage in these areas.
• Do not direct water into the nose or ear. The potentially deadly amoeba, Naegleria fowleri, may be present in some tap water or unchlorinated well water and may be fatal if directed into these areas.
• Use this product only as indicated in these instructions or as recommended by your dental professional.
• Only use fossing brush heads and accessories recommended by Water Pik, Inc.
• Do not drop or insert any foreign object into any opening or hose.
• Keep electrical cord away from heated surfaces.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• Fill reservoir with water or other dental professional recommended solutions only.
• Remove any oral jewelry prior to use.
• Do not use if you have an open wound on your tongue or in your mouth.
• If your physician or cardiologist has advised you to receive antibiotic premedication before dental procedures, you should consult  your dentist and/or medical professional before using this product or any other oral hygiene aid.
• Do not use iodine or water insoluble concentrated essential oils in this product. Use of these can reduce product performance and will shorten the life of the product. Use of these products may void warranty.
• Close supervision is necessary when this product is used by, on or near children or invalids.
• Magnetic feld: Pacemakers and similar implanted medical devices may be afected by magnet.
• Do not use the toothbrush motor for more than 5 minutes in each 10 minute period.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug is intended to ft into a polarized outlet only one way. If the plug does not ft fully into the outlet, reverse the plug. If it still does not ft, contact a qualifed electrician. Do not attempt to modify the plug in any way.
• This product does not contain any user serviceable parts. Do not attempt to open except for battery disposal. See “Battery Removal” section.
• Using toothpastes containing peroxide may damage the plastic housing of this product.
• Using abrasive or chemical cleaners may damage the plastic housing of this product.
  IMPORTANT This device uses wireless communication to control the on/of function of the water fosser pump motor from the toothbrush power handle. This device was designed for Home or Ofce use. To avoid electromagnetic interference, do not operate this device in restricted locations such as aircraf or specially marked areas in hospitals.

SAVE THESE INSTRUCTIONS

Troubleshooting

If you encounter any issues with your Waterpik Sonic-Fusion SF-02, here are some common problems and solutions:

• Device Not Turning On: Check if the battery is fully charged or if there is a blockage in the water reservoir.
• Low Water Pressure: Ensure that the water reservoir is filled properly and that there are no blockages in the flossing tip.
• Brush Head Not Rotating: Make sure that the brush head is securely attached to the handle.

Always refer to the user manual for detailed troubleshooting instructions and follow all safety warnings to avoid any potential risks.

Pros & Cons

Pros:

• Convenient Dual Functionality: Combines both water flossing and electric toothbrush functions in one device.
• Effective Cleaning: Removes plaque, food particles, and bacteria efficiently.
• Adjustable Settings: Multiple brushing modes and flossing pressure settings cater to different oral health needs.
• Long-Lasting Battery: Provides up to 2 weeks of use on a single charge.

Cons:

• Higher Cost: More expensive than traditional toothbrushes or basic water flossers.
• Bulkier Design: Larger than standard toothbrushes due to the combined functionality.
• No Travel Case Included: Users need to purchase a travel case separately for convenience.

Customer Reviews

Customers have generally praised the Waterpik Sonic-Fusion SF-02 for its ease of use and effectiveness in improving oral health. Many users appreciate the convenience of having both a water flosser and an electric toothbrush in one device. However, some users have noted that it may take some time to get accustomed to the dual functionality and that it is slightly larger than traditional toothbrushes.

Common complaints include the higher cost compared to single-function devices and the lack of a travel case included in the package.