Yamaha A-670 Integrated Amplifier User Manual

Content

Yamaha A-670 Integrated Amplifier Manual and Setup Guide

Introduction

The Yamaha A-670 Integrated Amplifier is a compact two-channel audio component designed for listeners who want clear stereo sound, straightforward operation, and flexible connections in a home audio system. It combines a power amplifier and control section in one chassis, making it suitable for bookshelf speakers, compact hi-fi systems, desktop listening spaces, and conventional living-room setups.

This amplifier is intended for users who prefer physical controls and dedicated stereo performance rather than the complexity of a multichannel home theater receiver. Its front-panel controls make it easy to adjust input selection, volume, tone, and balance, while the remote control supports convenient operation from a listening position. The Yamaha A-670 Integrated Amplifier can also be paired with compatible source components such as a CD player, network audio player, turntable with the correct phono-stage requirements, or other analog and digital equipment.

Useful features include Pure Direct operation for a shorter audio signal path, speaker output selection, headphone connectivity, and digital audio input support. The amplifier’s compact design helps it fit into smaller equipment racks without sacrificing conventional hi-fi functionality.

This Yamaha integrated amplifier is best suited to music listeners building a simple stereo system, users replacing an older amplifier, and anyone who wants dependable source switching without relying on a separate preamplifier and power amplifier. Always confirm the exact rear-panel connections and regional specifications before installation.

Yamaha A-670 Integrated Amplifier Specifications

Product type: Two-channel integrated stereo amplifier.
Audio configuration: Separate left and right speaker channels for conventional stereo playback.
Digital input: Optical digital audio input for compatible digital source equipment.
Analog connectivity: RCA stereo connections for compatible line-level source devices.
USB connection: USB 2.0 connection provided for compatible system integration.
Remote connection: Remote input for supported Yamaha component control arrangements.
Signal-to-noise ratio: At least 105 dB under the specified test conditions.
Output level: Approximately 2.0 V, with the published tolerance, under Yamaha’s stated test conditions.
Dimensions: Approximately 435 × 116 × 405 mm, measured as width, height, and depth.
Weight: Approximately 5.6 kg.
Listening modes: Pure Direct mode and standard tone-control operation.
Controls: Input selection, volume, balance, tone adjustment, speaker selection, and headphone output.

Speaker impedance and power-output requirements should be checked against the rating plate and the owner’s manual for the exact regional version. Do not assume that every A-670 variant has identical input labeling or accessories.

How to Set Up the Yamaha A-670 Integrated Amplifier

Place the amplifier on a stable, level surface with clear space around the ventilation openings. Keep it away from radiators, direct sunlight, moisture, and other heat-producing equipment.
Make sure the front-panel power switch is off and disconnect the AC power cord while making connections.
Connect the left and right speakers to the corresponding speaker terminals. Observe correct polarity by connecting positive to positive and negative to negative.
Connect source components to suitable analog RCA or optical digital inputs. Select a source with the matching front-panel input control after powering on.
Connect headphones to the headphone jack only after reducing the volume. Disconnect headphones before troubleshooting speaker output.
Insert the power cord into a suitable AC outlet, turn on the amplifier, and begin playback at a low volume.
Adjust balance and tone controls as required. Enable Pure Direct when you want the shortest signal path and do not need tone adjustments.

Never connect speaker wires while the amplifier is powered on, and prevent loose strands from touching adjacent terminals. If there is no sound, verify the selected input, source playback status, speaker selector, cable connections, and volume level.

Yamaha A-670 Troubleshooting Guide

Amplifier does not turn on: Confirm that the AC power cord is fully inserted at the amplifier and wall outlet. Test the outlet with another device. If the issue continues, unplug the unit and contact an authorized Yamaha service provider.
No sound: Confirm the correct input, start playback on the source device, increase the volume gradually, and check that the speaker selector is enabled.
Sound from only one speaker: Inspect both ends of the speaker and RCA cables. Check balance control settings and try another source to isolate the problem.
Hum or unwanted noise: Separate signal cables from power cables, check for loose connections, and temporarily disconnect source devices one at a time.
Headphones work but speakers do not: Confirm that the headphones are unplugged and that the selected speaker output is active.
Digital source has no audio: Confirm that the optical cable is fully seated and that the source is outputting a compatible PCM signal when required.
Overheating or shutdown: Turn the amplifier off, allow it to cool, improve ventilation, and inspect the speaker wiring for short circuits.

The published owner’s manual does not provide a general user-facing numerical error-code list for this model. If symptoms persist, disconnect the power cord and contact an authorized Yamaha dealer or service center. Warranty eligibility depends on region, purchase channel, product condition, and proof of purchase; keep the receipt and serial number available.

Yamaha A-670 Pros and Cons

Advantages

Simple stereo operation: Dedicated two-channel controls are easier to use than the menus found on many home theater receivers.
Flexible source support: Analog RCA and optical digital connections accommodate common CD, streaming, television, and other source components.
Compact integrated design: Combining control and amplification in one chassis saves space and reduces cable clutter.
Pure Direct mode: This option can shorten the signal path when tone controls and other processing are unnecessary.
Convenient listening: A headphone output and remote operation support both seated listening and everyday use.

Limitations

Not a multichannel receiver: It is designed for stereo playback rather than surround sound or home theater speaker systems.
Limited modern streaming features: Users seeking built-in network streaming, wireless music, or app control may need an external streamer or a network amplifier.
Connection requirements: A turntable may require a separate phono preamplifier if the turntable does not provide suitable line-level output.
Installation care required: Incorrect speaker polarity, inadequate ventilation, or shorted speaker wires can cause poor performance or protective shutdown.

The amplifier suits listeners who value straightforward, traditional hi-fi operation. Choose a different product category if built-in wireless streaming, HDMI connectivity, surround processing, or extensive room-correction features are essential.

PDF

Faqs

How do I set up the yamaha A-670 Integrated Amplifier for the first time?

Place the yamaha A-670 Integrated Amplifier on a stable, well-ventilated surface with space around the top and sides. Connect the left and right speakers to the matching speaker terminals, observing correct polarity. Attach source devices to the appropriate analog inputs, then connect the power cord. Start with the volume control at its lowest setting, select the correct input, switch on the amplifier, and gradually increase the volume.

What should I check if the yamaha A-670 Integrated Amplifier produces no sound?

Confirm that the amplifier is switched on and that the selected input matches the connected source. Check whether the source device is playing and its output is active. Inspect both speaker cables for loose connections, damaged insulation, or accidental contact between positive and negative terminals. Verify that the volume is raised and that headphones are not connected if speaker output is being used. Test another input or source to isolate the problem.

Can I connect a turntable to the yamaha A-670 Integrated Amplifier?

A turntable can be connected only when its cartridge type and output level match the amplifier’s phono input requirements. Connect the turntable’s left and right plugs to the phono terminals and attach its ground wire to the amplifier’s grounding screw if provided. If the turntable has a built-in preamplifier, use a suitable line-level input instead and disable the preamplifier when possible to avoid excessive or distorted volume.

How can I connect a CD player, network streamer, or television to the yamaha A-670 Integrated Amplifier?

Use the amplifier’s available analog line-level inputs for a CD player, network streamer, television, or other compatible source. Connect the device’s left and right outputs to a matching input pair, then select that input on the front panel or remote control. Digital-only devices require an external digital-to-analog converter before connection. Keep signal cables away from power cords where practical, and reduce volume before changing connections.

Why does the yamaha A-670 Integrated Amplifier sound distorted or unusually quiet?

First reduce the volume and check whether distortion occurs with every source or only one. A faulty recording, overloaded source output, incorrect phono connection, or damaged cable can create distortion. Unusually low sound may result from a muted source, incorrect input selection, reversed connection routing, or a turntable without the required phono preamplifier. Confirm speaker polarity and test a known-good source at moderate volume.

How do I get the best stereo performance from the yamaha A-670 Integrated Amplifier?

Position the left and right speakers at equal distances from the listening position, with the tweeters near ear level. Avoid placing speakers directly against walls or in corners unless the system requires it. Use the amplifier’s direct or tone controls according to the listening material and room, rather than boosting bass and treble excessively. Ensure both channels use matching speaker connections and keep the amplifier adequately ventilated.

What speaker and source compatibility requirements apply to the yamaha A-670 Integrated Amplifier?

Use passive speakers whose impedance and power-handling requirements fall within the amplifier’s specifications in the owner’s manual. Do not connect speaker outputs to another amplifier or join the left and right channels together. Line-level sources such as CD players and streamers are generally connected through analog inputs, while headphones should use the amplifier’s headphone output when available. Always turn the system off before changing speaker wiring.

How should I clean and maintain the yamaha A-670 Integrated Amplifier?

Turn off and unplug the yamaha A-670 Integrated Amplifier before cleaning. Wipe the cabinet and controls with a soft, dry cloth; use only a lightly damp cloth when necessary, and keep moisture away from vents and connectors. Do not use abrasive cleaners, solvents, or sprays directly on the unit. Keep ventilation openings clear of dust, avoid stacking heat-producing equipment on top, and inspect cables periodically for wear or loose plugs.