Yamaha A-S2000 Stereo Amplifier User Manual

Content

Yamaha A-S2000 Stereo Amplifier Manual

Introduction to the Yamaha A-S2000 Stereo Amplifier

The Yamaha A-S2000 Stereo Amplifier is a high-performance integrated amplifier designed for demanding two-channel music systems. It combines a dedicated preamplifier and power amplifier in one substantial chassis, providing a clean signal path for stereo listening without the complexity of separate components.

Its design focuses on accurate musical reproduction, strong current delivery, and low-noise operation. Yamaha uses fully balanced signal transmission, a floating balanced power amplifier, separate power supplies, and a discrete phono stage to support both modern and traditional audio systems. The amplifier also includes a dedicated headphone circuit intended to drive a broad range of headphones.

The A-S2000 is suitable for serious home audio enthusiasts, vinyl listeners, CD users, and owners of passive bookshelf or floor-standing speakers. It can serve as the central component in a living-room stereo, dedicated listening room, or high-quality analog system. Balanced XLR inputs are available for compatible source equipment, while conventional RCA connections support CD players, tuners, network players, and other line-level devices.

Because this is an integrated stereo amplifier rather than an AV receiver, it concentrates on two-channel sound instead of surround processing, video switching, wireless streaming, or room correction. Users who already own a streamer or digital-to-analog converter can connect it as an external source. For listeners who value robust construction, flexible analog connectivity, phono support, and detailed stereo performance, the Yamaha A-S2000 remains a capable centerpiece.

Yamaha A-S2000 Specifications and Features

Type: Integrated stereo amplifier for two-channel passive speaker systems.
Maximum output power: 160 W + 160 W at 4 ohms, 1 kHz, and 0.7% THD for the European specification.
Dynamic power per channel: 105 W at 8 ohms, 135 W at 6 ohms, 190 W at 4 ohms, and 220 W at 2 ohms.
Frequency response: 5 Hz to 100 kHz with a tolerance of +0 dB/-3 dB.
Total harmonic distortion: 0.015% for CD input to speaker output from 20 Hz to 20 kHz.
Signal-to-noise ratio: 98 dB for the CD input under the specified measurement condition.
CD input sensitivity and impedance: 150 mV and 47 kOhms.
Damping factor: 160, supporting controlled speaker-driver movement.
RIAA deviation: ±0.5 dB from 20 Hz to 20 kHz for the phono equalization circuit.
Connections: Analog RCA inputs, balanced XLR input, phono input, speaker terminals, recording output, and headphone output.
Dimensions: 435 × 137 × 465 mm, or approximately 17-1/8 × 5-3/8 × 18-5/16 inches.
Weight: Approximately 22.7 kg or 50 lb.

Specifications can vary by market and production documentation. Confirm the rating label and regional owner’s manual before installation.

How to Set Up the Yamaha A-S2000 Stereo Amplifier

Place the amplifier on a stable, level surface with open space around the ventilation openings. Do not install it inside a tightly enclosed cabinet.
Turn the power off and disconnect the AC cable before connecting speakers or source components.
Connect the left and right passive speakers to the corresponding speaker terminals. Observe polarity: connect positive to positive and negative to negative.
Connect source devices to suitable inputs. Use the balanced XLR input only with a compatible balanced source; use RCA inputs for standard line-level equipment.
Connect a turntable to the phono input. Attach the turntable ground wire to the amplifier’s grounding terminal when available to reduce hum.
Connect a separate recorder to the recording output if required. Connect headphones to the front-panel headphone socket for private listening.
Set the volume to its lowest position, select the required input, and connect the AC power cable to a correctly rated outlet.
Switch on the amplifier, start playback at low volume, and gradually increase the level.

Never connect speaker wires while the amplifier is powered. Keep exposed wire strands from touching adjacent terminals, the chassis, or each other. If the sound is reversed between channels, switch off the system and verify left/right and positive/negative connections.

Yamaha A-S2000 Troubleshooting Guide

No power

Check that the AC cable is fully inserted and that the wall outlet works. If the amplifier immediately shuts down, disconnect all sources and speakers, wait, and try powering it on again. Persistent shutdown indicates a possible protection or hardware fault.

No sound from one or both speakers

Confirm the selected input, source playback status, volume level, and speaker selector setting. Inspect every RCA, XLR, and speaker connection. Make sure speaker conductors are not shorting at the terminals.

Hum or unwanted noise

Connect the turntable ground lead, separate signal cables from power cables, and test sources individually. A faulty interconnect or incompatible grounding arrangement can also produce hum.

Protection indicator or unexpected shutdown

Switch the amplifier off and allow it to cool. Check for shorted speaker wires, excessive volume, blocked ventilation, or speakers with an unsuitable impedance load. Do not repeatedly reset the unit if the protection condition returns.

Weak or distorted phono sound

Verify that the turntable is connected to the phono input rather than a standard line input. Check cartridge wiring, stylus condition, grounding, and the turntable’s mechanical setup.

The A-S2000 does not use a broad consumer-style numerical error-code system. For unresolved faults, keep the model and serial number available and consult the official Yamaha owner’s manual, an authorized Yamaha dealer, or a Yamaha service center. Do not remove the cover; hazardous voltages may remain inside even after disconnection.

Pros and Cons of the Yamaha A-S2000

Advantages

Strong stereo power: High dynamic output can suit many demanding passive floor-standing speakers.
Balanced architecture: Fully balanced signal handling can benefit systems using compatible XLR source equipment.
Flexible analog connectivity: RCA inputs, balanced input, phono support, recording output, and headphone output cover common stereo applications.
Dedicated phono circuitry: The built-in phono stage makes the amplifier practical for vinyl-focused systems without requiring an external phono preamplifier.
Substantial construction: The large chassis and approximately 22.7 kg weight reflect a robust component design.
Focused listening experience: Its two-channel design avoids unnecessary video and surround functions.

Limitations

No built-in network streaming: A separate streamer or digital source is required for network audio.
No HDMI or video switching: It is not a replacement for a home-theater AV receiver.
Large and heavy chassis: Installation may require a strong shelf and adequate ventilation.
Analog-centered design: Users who need USB audio, Bluetooth, room correction, or integrated digital inputs may prefer a newer connected amplifier.
Best suited to deliberate stereo systems: It is ideal for passive speakers and separate sources, but less suitable for compact all-in-one setups.

The Yamaha A-S2000 Stereo Amplifier suits listeners who prioritize powerful, carefully engineered analog stereo playback. Choose another product category if wireless streaming, HDMI connectivity, multiroom audio, or automated room calibration is essential.

PDF

Faqs

How do I set up the Yamaha A-S2000 Stereo Amplifier for the first time?

Place the Yamaha A-S2000 Stereo Amplifier on a stable, well-ventilated surface with clearance around its heat vents. With the amplifier switched off, connect the left and right speakers to the matching SPEAKERS terminals, maintaining correct positive and negative polarity. Connect source components to the appropriate RCA inputs, or use the balanced CD input with a compatible XLR-equipped CD player. Select the correct input before raising the volume.

How can I connect a turntable to the Yamaha A-S2000 Stereo Amplifier?

Connect a turntable’s left and right output cables to the PHONO inputs on the Yamaha A-S2000 Stereo Amplifier, then attach the turntable’s ground wire to the amplifier’s GND terminal. Set the PHONO selector to MM for a moving-magnet cartridge or MC for a moving-coil cartridge. If you hear hum, confirm the ground connection, keep signal cables away from power cords, and verify that the cartridge leads are firmly attached.

Can I use balanced XLR connections with the Yamaha A-S2000 Stereo Amplifier?

Yes. The Yamaha A-S2000 Stereo Amplifier provides balanced CD input connections for a CD player or another source with balanced XLR outputs. Use suitable male XLR cables and connect the left and right channels correctly. Balanced connections can help reduce noise over longer cable runs, but they do not convert an unbalanced source into a balanced one. For RCA-only equipment, use the corresponding line-level RCA input instead.

How do I use speakers A and B or a bi-wire connection on the Yamaha A-S2000 Stereo Amplifier?

Use the SPEAKERS selector to choose speaker set A, speaker set B, or both when operating two compatible speaker pairs. For bi-wiring, connect the separate woofer and tweeter terminals on each speaker to the amplifier’s speaker terminals, remove the speaker’s jumper plates, and select the A+B BI-WIRING position. Check polarity carefully and never allow loose speaker strands to touch adjacent terminals.

What should I do if the Yamaha A-S2000 Stereo Amplifier has no sound?

Confirm that the amplifier is powered on, the correct input is selected, and the volume control is raised above minimum. Check both ends of every cable and ensure left and right connections match. Inspect speaker wires for reversed polarity, loose strands, or contact between positive and negative terminals. If the protection circuitry has activated, switch the amplifier off, disconnect power, correct any short circuit, and allow it to cool before testing again.

Why is the Yamaha A-S2000 Stereo Amplifier producing weak bass or an unnatural stereo image?

Weak bass often results from reversed speaker polarity, which can cause the channels to cancel each other acoustically. Turn the amplifier off and verify that every positive terminal connects to the matching positive speaker terminal, with the same check for negative terminals. Also confirm that both speakers are connected to the same speaker output selection. If using bi-wiring, remove the speaker jumper plates and confirm each driver section is wired correctly.

How can I optimize Yamaha A-S2000 Stereo Amplifier performance in a stereo system?

Use speakers that suit the amplifier’s output and impedance requirements, and position them symmetrically with the listening position. Keep the amplifier on a rigid, ventilated shelf and avoid stacking heat-producing equipment directly on top. Use short, properly terminated speaker cables, separate power cables from low-level signal cables, and select the cleanest appropriate input. Adjust tone controls only after confirming speaker placement and source settings.

How should I clean and maintain the Yamaha A-S2000 Stereo Amplifier?

Switch off the Yamaha A-S2000 Stereo Amplifier and unplug it before cleaning. Wipe the exterior with a soft, dry cloth; avoid liquid cleaners, sprays, and abrasive materials entering the controls or ventilation openings. Keep dust away from the speaker and input terminals, and periodically check cables for oxidation, damage, or loose connections. Do not open the chassis or attempt internal repairs; have unusual noise, overheating, or repeated protection shutdowns examined by an authorized technician.