Introduction

For all your fitness tracking and motivational needs, go no further than the sleek and sophisticated Yamaytech SW021 Smart Watch. This water-resistant wristwatch operates with both iOS and Android smartphones and has a number of useful features, such as a heart rate monitor, sleep tracking, step counter, and various sport modes. The SW021 is a must-have fitness tracker because to its configurable watch face and real-time notifications that keep you informed and engaged.

Yamaytek SW021 Fitness Tracker Smart Watch Product Parameters

Bind Watch

1. Download and install App
   You can set up the watch through the “VeryFitPro” app for iOS or Android devices. The steps are shown as follows:
   Notes: The hardware platform of the equipment system shall meet requirements.I. Bind Watch

   

2. Bind process

   • Turn on the Bluetooth and GPS on your mobile phone

     

     

   • Bind Device

   • Select product model: ID205L

   • Click “Ok” to complete binding.
     Notes

     • During binding process, VeryFitPro will prompt you to enable GPS and Bluetooth, and authorize VeryFitPro to get access to the GPS on you mobile phone.

     • Apple phones need to click “pair”, the watch has a variety of message reminders.

       

3. Synchronous data
   In daily wear, the watch can detect all kinds of product data. The user needs to connect the watch with bluetooth on the APP before synchronous operation. The detailed operations are shown as follows:

   

   Open the mobile APP> swipe down the page> sync prompt appears

Notes! Please synchronize the data at least once within 7 days to avoid data loss at the watch end.

Instruction for Use

1. Charging schematic
   Buckle the watch into the charger seat as shown in the picture. It needs to be charged to activate the watch when it is started for the first time.

   

   Make sure the metal contacts of the watch and of the Charging dock match well, then the watch can be charged properly.

2. Wear/install

1. Wear
   Wear the wristband one finger away from the wrist bone and adjust the tightness of the wristband to a comfortable position.

2. Replace the strap
   Switch Flip the switch and take out the wristband

Tip: Wearing too loosely may affect the accuracy of heart rate data.

Operating Instructions

1. Definition of key function

   

2. Watch dial switch

   

3. Main interface operation Swipe the screen to enter different interfaces (interactive interfacetile diagram)

   • Notice：Display notification message content.

   • Status

     

   • Data bar

     

   • Function list interface：See below for Function Introduction。

     

4. Dial data view (default dial)。

   

   Long press the screen to switch different data

Description

The Yamaytek SW021 Fitness Tracker Smart Watch is a versatile and feature-rich smartwatch that is perfect for anyone who wants to stay connected and track their fitness goals with ease. With its high-resolution touchscreen display, you can easily access all of its features, including its heart rate monitor, pedometer, sleep monitor, and music player. The smartwatch is also compatible with both iOS and Android devices, making it a great choice for anyone, regardless of their preferred mobile operating system.

One of the standout features of the Yamitek Smart Watch ID205L is its built-in camera, which allows you to take photos and videos on the go. The camera is paired with a range of editing tools, making it easy to create and share your favorite moments with friends and family. The smartwatch also features Bluetooth connectivity, allowing you to pair it with your smartphone and receive notifications for incoming calls, messages, and emails directly on your wrist.

Function Introduction

Icon function introduction

1. Enter the sports window, and choose different sports modes. Change the sports mode on the APP

   • Start sports Click the sports icon > select the sports type > enter the sports countdown automatically

     

   • During sports
     Pause sports: short press the right key
     Restore sports: short press the right key

   • End sports
     End sports: long press the right key> select the end button on the screen

2. Perform a heart rate test to check your heart rate data for the day.

   

3. Help you regulate your breathing and relax your mood.

4. View, turn off or turn on the alarm clock. You need to add an z alarm clock on the mobile APP.

5. Control music play on your mobile phone (watch cannot store music)

6. Have the timing and countdown function.

7. Record recent sports

8. settings

Sleep detection: The watch automatically detects sleep all day, please wear a good watch when using it;
Notes: For more functions and operation, please check the VeryFitPro software of the mobile phone.

Setup Guide

Setting up the Yamaytek SW021 Fitness Tracker Smart Watch is simple and straightforward. Here are the steps you can follow to get started:

1. Charge the smartwatch fully before use.
2. Download and install the Yamitek Smart Watch app on your smartphone.
3. Turn on the smartwatch and follow the on-screen instructions to connect it to your smartphone via Bluetooth.
4. Customize your settings, including your preferred watch face, notifications, and more.
5. Start using your smartwatch to track your fitness goals, stay connected, and more.

Cleaning and Maintenance

It is recommended to wear and maintain according to the following three points:

1. Keep the product clean;

2. Keep the product dry;

3. Do not wear it too tight. Do not use household cleaners to clean the watch, butuse the soap free detergent. It is recommended to use alcohol to scrub stains that are not easy to remove.

Troubleshooting

If you encounter any issues with your Yamaytek SW021 Fitness Tracker Smart Watch, here are some common problems and solutions to help you troubleshoot:

• If the smartwatch won't turn on, make sure it is charged fully.
• If the smartwatch won't connect to your smartphone, make sure Bluetooth is enabled on both devices and try restarting the smartwatch.
• If the touchscreen is unresponsive, try restarting the smartwatch or resetting it to its factory settings.
• If the smartwatch's battery life is shorter than expected, try turning off unnecessary features or reducing the brightness of the display.

Frequently Asked Questions

Mobile APP search for the watch failed

1. It is recommended to update VeryFitPlus to the latest version.

2. It is recommended to close all programs, restart the Bluetooth, and then connect

3. Confirm whether the mobile phone system meets Android 4.4 or IOS 8.0 or above.

The watch received no alerts, text messages or phone calls

1. You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch.

2. The iphone needs to be paired with the watch via Bluetooth.(Please check the column of “Synchronous Data” for details)

3. You need to keep your watch connected to Bluetooth.

Bluetooth is often disconnected

1. If the distance between the watch and the mobile phone is too far, the connection effect of more than 7m bluetooth is obviously weakened.

2. Whether there is a shield between the watch and the mobile phone, the human body, wearing metal jewelry, etc., will interfere with the bluetooth connection signal.

3. Whether the bluetooth function of the mobile phone is abnormal.

About data backup
The data of the watch is synchronized at least once every 7 days to the mobile phone (the watch end only keeps the data of the last 7 days).
How to restart and restore factory settings
Shutdown operation: Watch > set > shutdown/right-key restart Restore factory settings: connect watch to APP > open APP > device model > more settings

Do I need to keep my bluetooth on when I wear my watch?

1. For the three functions, i.e. counting steps, sleeping and alarm clock, you do not need to connect the watch to the mobile phone all the time. If you only need to wear a watch when you exercise, you can connect the watch and your mobile phone to view the data synchronously after the exercise.

2. For the functions of call alert, message alert, find the phone, you need to turn on the mobile phone’s bluetooth, and maintain the connection with the mobile phone. More detailed questions can be answered with help and feedback in the APP.

Operation steps: VeryFitPro > > help and feedback
Matters Needing Attention

1. Watch data needs to be kept once every 7 days to avoid data loss.

2. The watch has no waterproof effect on seawater, acidic and alkaline solutions, chemical reagents and other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty.

3. Sports mode supports up to 6 hours of exercise at a time.

4. The watch has a waterproof level of IP68 and supports cold water shower, swimming, but not diving.

5. Avoid wearing the watch too tight in daily use. Please keep the parts of the watch touching the skin dry.

6. When your heart rate is measured, keep your arm still during the test. please contact us:[email protected]

Yamaytek SW021 Fitness Tracker Smart Watch Pros & Cons

Pros

• Affordable price point
• High-resolution touchscreen display
• Range of features, including heart rate monitor, pedometer, and sleep monitor
• Built-in camera and music player
• Compatible with both iOS and Android devices

Cons

• Battery life could be longer
• Limited selection of third-party apps
• Touchscreen can be unresponsive at times

Customer Reviews

Customers who have purchased the Yamaytek SW021 Fitness Tracker Smart Watch have praised its affordable price point, high-resolution display, and range of features. However, some have noted that the touchscreen can be unresponsive at times and that the battery life could be longer. Overall, most customers have been pleased with their purchase and recommend the smartwatch to others looking for an affordable and feature-rich smartwatch.

Most Common Complaints

The most common complaints about the Yamaytek SW021 Fitness Tracker Smart Watch include its short battery life and unresponsive touchscreen. However, many customers have noted that these issues can be resolved by turning off unnecessary features or resetting the smartwatch to its factory settings.