Introduction of Zinsser Gardz Problem Surface Sealer GDZ-01

Zinsser Gardz Problem Surface Sealer GDZ-01 is a high-performance water-based primer that seals and stabilizes porous and problem surfaces prior to painting. This product is perfect for interior and exterior surfaces, including drywall, plaster, concrete, brick, and stucco. With an estimated price range of $15 to $20 per quart, this sealer is a cost-effective solution for any DIY or professional project. The product was launched in 2015 and has since gained popularity among painters and contractors for its ease of use and excellent results.

Detailed Specifications

Key features of Problem Surface Sealer GDZ-01 include

• Water-based formula with low odor
• Seals and stabilizes porous and problem surfaces
• Prevents surface contaminants from bleeding through paint
• Interior and exterior use
• Covers up to 400 square feet per gallon
• Dries to the touch in 30 minutes and can be recoated in 1 hour
• Mildew-resistant formula
• Available in quarts and gallons

PRODUCTS 

• SKU: DESCRIPTION
• 2304: 1 Quart
• 2301: 1 Gallon
• 2300: 5 Gallon Pail

Description of Gardz Problem Surface Sealer 

Problem Surface Sealer GDZ-01 is a versatile and reliable sealer that can be used on a variety of surfaces. Its unique formula seals and stabilizes porous surfaces, ensuring that paint adheres properly and provides a smooth, even finish. The sealer also prevents surface contaminants, such as water stains and smoke damage, from bleeding through the paint. Its low odor and quick dry time make it an ideal choice for both interior and exterior projects, and its mildew-resistant formula provides added protection against mold and mildew growth. With its high coverage rate, Zinsser Gardz Problem Surface Sealer GDZ-01 is a cost-effective solution for any painting project.
Zinsser GARDZ Problem Surface Sealer is a clear, water-based acrylic resin sealer designed for interior application to porous surfaces prior to painting, texturing or wallcovering. GARDZ is recommended for sealing problem porous surfaces such as bare or damaged drywall, plaster, cement and cementitious coatings, spackling paste and joint compound, calcimine, stucco, acoustic and texture finishes, and uncoated wallpaper.  It is suitable for application to interior walls, ceilings, and related surfaces. GARDZ will also adhere to and seal in old wallpaper paste and adhesive residue. GARDZ has a milky blue-white color that helps to determine where it has been applied, but dries water clear. Use directly from the container. Tinting is not recommended.   

• DAMAGED DRYWALL 
  GARDZ prevents bubbles that form when damaged drywall is skim coated with spackling or joint compound. It penetrates and seals damaged facing paper, restoring it to a sound surface for repairs, making it suitable for painting or wallcovering. 
• NEW DRYWALL/JOINT COMPOUND AND SPACKLING 
  GARDZ penetrates and uniformly seals, creating a moisture resistant film that protects drywall from blistering, tearing and other damage when re-decorating in the future. 
• PLASTER 
  Allow new plaster to cure at least 24 hours before applying GARDZ. Old bare plaster must be clean, dry and in sound condition. Repair any cracks or holes with spackling paste or joint compound before sealing the surface.  
• CALCIMINE 
  GARDZ penetrates calcimine more effectively than oil-based coatings and has much lower odor. GARDZ prevents water-based topcoat or paint or texture finishes from softening up calcimine layers.   
• WALLPAPER ADHESIVE RESIDUE 
  Water-based coatings or texture finishes will re-activate old wallpaper adhesive which results in cracking and peeling. GARDZ completely seals in residual adhesive which can ruin water-based topcoats and texture finishes.   
• TEXTURE AND POPCORN FINISHES 
  Use GARDZ to seal textured walls and popcorn ceilings. It penetrates soft or crumbly texture material and hardens it, creating a durable, water-resistant barrier that prevents primer or paint from softening texture material underneath. 

Setup of Problem Surface Sealer

To use Problem Surface Sealer GDZ-01, follow these steps

1. Stir the product thoroughly before using.
2. Apply the sealer with a brush, roller, or sprayer.
3. Allow the sealer to dry to the touch (about 30 minutes).
4. Recoat as needed, allowing each coat to dry before applying the next.
5. Once the final coat is dry, paint over the sealer with your desired paint.

PERFORMANCE CHARACTERISTICS 

• Penetrates deeply into porous surfaces
• Drives fast to a hard, moisture-proof film
• Prevents drywall blistering/bubbling
• Binds down chalky surfaces
• Strengthens soft texture finishes
• Seals in residual wallpaper paste
• Can be applied to high pH surfaces
• Clear, low odor, water-based formula

PRODUCT APPLICATION 

• SURFACE PREPARATION 
  Surfaces should be clean, dry, sound and free of dust, dirt, grime, grease, oil, wax, mildew, or any contamination that may interfere with adhesion. Gardz will seal residual adhesive after removal of high profile adhesive.  If unsure of cleanliness, wash surface with an appropriate Krud Kutter cleaner, ammonia or a TSP substitute.  Remove any peeling and/or unsound coatings.  Sand any remaining paint film edges smooth. Countersink exposed nail heads, spot prime and fill all nail holes and gouges with Ready-Patch spackling compound or equally suitable material. 
  WARNING: If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. 
• MILDEW 
  Remove interior mold and before painting with Jomax Virus and Mold Killer. Rinse well. Always wear protective clothing and goggles to prevent eye and skin contact.  If you are concerned about mold and mildew behind walls, underneath flooring, in commercial buildings and schools, follow appropriate guidelines for mold removal. 
• APPLICATION 
  Apply only when air, material, and surface temperatures are between 50-90ºF (10-32ºC) and the relative humidity is below 85%. Thoroughly mix before using. DO NOT THIN. Apply GARDZ liberally to the entire surface using a brush, medium nap roller or sprayer, to ensure good penetration. Do not over apply or the coating will sag. GARDZ appears milky blue-white during the application but dries water clear. Properly sealed surfaces should have a uniform sheen. Reapply to areas that have been missed or lack sufficient coating.  
  Brush – For best results, use a high quality nylon/polyester or synthetic blend bristle brush with flagged tips. 
  Roller – Use a ⅜” nap or less synthetic roller cover or the Zinsser WallWiz® roller. Apply GARDZ to walls from the bottom up to prevent product from running down the wall. For ceiling applications (popcorn) GARDZ may be applied using a power sprayer or garden sprayer. 
  Sprayer – GARDZ may be applied using HVLP or airless sprayer systems. Use a 0.011 to 0.013 tip and 800-1200 psi for airless application. Maintain a distance of at least 18-24 inches between the spray tip and the surface. If the surface is too fragile for power spray application, GARDZ may be applied with a garden sprayer. Pour GARDZ into the tank and pressurize according to the manufacturer’s directions. Adjust the nozzle settling to dispense product in a fine, consistent fan pattern, keeping the spray tip at least 12 to 18 inches from the surface. Follow manufacturer’s instructions for clean up and storage and protect adjacent areas from overspray. 
• LIMITATIONS  
  GARDZ is not recommended for floors or decks or surfaces subject to immersion or prolonged contact with water.   
• DRY TIME 
  Dries to the touch in 30 minutes and is ready for finish coating or wallpapering after 3 hours. Allow more time at cooler temperatures.  
• TOPCOATING/WALLPAPERING 
  When dry, GARDZ may be topcoated with any standard architectural water-based or oil-based primer or topcoat. GARDZ is compatible with all types of joint compounds and spackling pastes and any texture or popcorn finish may be applied over it. Some types of wallpaper and translucent wallcoverings may require an additional coat of an opaque primer such as ShieldZ Universal. 
• CLEAN-UP 
  Clean up spills and paint drips with soap and warm water. Wash application tools in warm, soapy water immediately after use. If product has dried on an application tool, soak it overnight in a solution of ammoniated household detergent and water. Follow equipment manufacturer’s directions to clean spray equipment. Dispose of unused or unwanted product in accordance with local laws regulating water-based coatings. 

PHYSICAL PROPERTIES 

Troubleshooting

Here are some common problems and solutions when using Zinsser Gardz Problem Surface Sealer GDZ-01

• Problem: The sealer is not adhering to the surface.
• Solution: Make sure the surface is clean and free of dirt, dust, and debris. If necessary, use a degreaser or trisodium phosphate (TSP) to clean the surface. Allow the surface to dry completely before applying the sealer.
• Problem: The sealer is bubbling or cracking.
• Solution: Make sure to stir the product thoroughly before using. If the sealer is applied too thickly, it may bubble or crack. Apply thin, even coats and allow each coat to dry before applying the next.
• Problem: The sealer is not covering the surface.
• Solution: Make sure to calculate the coverage rate and use enough sealer to cover the surface. If necessary, use a second coat to ensure complete coverage.

Pros & Cons of Zinsser Gardz GDZ-01

Pros

• Seals and stabilizes porous surfaces
• Prevents surface contaminants from bleeding through paint
• Interior and exterior use
• Low odor
• Quick dry time

Cons

• May require multiple coats for complete coverage
• May not cover severe surface stains or damage

Customer Reviews of Zinsser Gardz Problem Surface Sealer GDZ-01

Customers have praised Zinsser Gardz Problem Surface Sealer for its ease of use and excellent results. Many reviewers have noted that the sealer provides excellent coverage and prevents surface contaminants from bleeding through the paint. Some common complaints include the product's short shelf life and its inability to cover severe surface stains or damage.