Introduction of Bissell Hercules Floor Scrubber BGFS650

The Hercules Floor Scrubber is a powerful and versatile cleaning tool designed to tackle even the toughest messes on a variety of floor surfaces. With a suggested retail price of $299.99 and a launch date of January 2021, this floor scrubber is an investment in cleaner, healthier floors.

Detailed Specifications of Hercules Floor Scrubber 

The Bissell Hercules Floor Scrubber boasts several key features, including

• 2-tank system, with one tank for clean water and one for dirty water
• Rotating scrub brush that spins at 300 RPM for deep cleaning
• Adjustable handle for user comfort
• Built-in storage caddy for easy transport
• Ability to clean up to 13 x 20 feet per fill
• Weighs only 16.5 pounds for easy maneuverability
• Powerful 12 amp motor
• 2-year warranty for peace of mind

Pack Contents of Hercules Floor Scrubber BGFS650

1. Cleaning & Polishing head
2. Handle assembly of upper & lower sections
3. Scrubbing pads (white) x2 FS500-4
4. Cleaning/Polishing pads (blue) x2 FS500-3
5. Buffing pads (yellow) x2 FS500-6
6. Scrubbing brush plates x2 FS650-1
7. Hook & Loop backing plates x2 FS650-2

Read the Care and Use instructions before using the  Bissell Hercules Floor Scrubber BGFS650 BigGreen Commerical Hercules Scrub and Clean and make sure that

• The power cord is in perfect condition
• All packaging materials are removed from the machine

Description of Bissell Hercules Floor Scrubber 

The Bissell Hercules Floor Scrubber is a versatile cleaning tool that makes it easy to tackle messes on a variety of floor surfaces. With its powerful 12 amp motor and adjustable handle, this floor scrubber makes it easy to deep clean your floors with minimal effort. The 2-tank system keeps clean and dirty water separate, while the rotating scrub brush spins at 300 RPM to help lift dirt and grime. Plus, the built-in storage caddy makes it easy to transport this floor scrubber from room to room, and the 2-year warranty ensures that you can clean with confidence.

Assembling the Appliance

• Insert the handle into the aperture at the top of the head unit (Fig.1) and screw the collar in securely (Fig.2).
• Push plastic upper handle section into place which will lock into place by way of a metal button 

Changing the pads and plates on your product

• Make sure appliance is not plugged in before fitting pads.

• Invert the cleaning head so that the drive hubs are accessible (Fig. 3)

  

• Place the required hook & loop backing plate (for pads) or brush plate over the hub, making sure the four connectors are aligned to the holes in the hub (Fig.4).
• Press the plate down to clip into place.

• Always use two plates of the same type, i.e. not 1 brush and 1 pad (Fig.5).

  

• Simply pull the plates/brushes off to remove and change. White/blue/yellow pads can be applied directly to the backing plates and peeled off to remove (Fig.6)

• Adjust the height of the handle to suit your needs by pulling on the extension button (Fig.7).

  

• For additional stability, the pro-grip handle can be opened to enable two-handed use. Depress the button above the grip (Fig.8) and open the handle (Fig.9)

  

Using your  Bissell Hercules Floor Scrubber BGFS650 and Clean

DO NOT USE ON CARPET

• Take care not to slip over when polishing floors, there is a dedicated lot prody it, process. inappropriate detergents or types of polish could leave the floor dangerously slippery. 
• Do not leave the product operating in one area for a prolonged period of time as this may damage your floor surface.

Applying floor treatments

• The recommended polish is Bissell Big GreenCommerical Gloss Floor Polish of which sample is supplied and available from Bissell BigGreen Commerical.
• Always read and follow the manufacturer's instructions.
• Apply the treatment directly to the floor unless instructions indicate otherwise.

Scrubbing / Cleaning the floor

• Heavily soiled surfaces may require the brush attachments are used initially to loosen any debris. Otherwise, ensure that the white scrubbing pads are attached (see page 4). 
• Turn the product on at the power socket.

• With your foot securing the head of the polisher on the floor (1), pull the handle towards you (2) and the product will start (Fig. 10). Returning the handle to its upright position will stop the product.

  

• Move at a speed of about 1 minute every 1m and follow the diagram for an even finish (Fig.11).

  

• Do not leave the product operating in one area for a prolonged period as this may damage your floor.
• Once cleaning is complete, turn the unit off by returning it to its upright position.

Polishing/buffing the floor

• Clean the floor thoroughly first before adding your chosen floor polish/wax
• If you are using a floor polishing wax or oil, refer to the manufacturer's instructions when using with the Bissell Hercules Floor Scrubber BGFS650 Scrub and Clean.
• Start with the blue cleaning pads initially and buff to a finish with the yellow pads for a high-sheen finish.
• Keep the polisher moving. Do not stop in one place for a long time or it will spoil the finish.
• Once polishing is complete, turn the unit off by returning it to its upright position.
• A glossy finish may not always be possible; this depends on the polish/wax used and the type of floor surface. Sometimes several coats of polish will enable a glossy finish.

Power Cable Storage

• The electrical power cable can be stored on the rear of the product using the convenient power cable storage hooks.

Cleaning the floor pads

• All pads and floor attachments are washable.
• The brushes and scouring pads can be washed under the tap with warm soapy water. The blue & yellow polishing pads can also be machine-washed and dried naturally. It is recommended to re-shape the pads whilst drying.
• The polishing head unit is not suitable for washing in water, it must be wiped with a damp cloth.

Troubleshooting of BGFS650

While the Bissell Hercules Floor Scrubber is a reliable cleaning tool, there are a few common problems that you may encounter. Here are some solutions to help you troubleshoot these issues

• Problem: The floor scrubber isn't picking up water or dirt.
  Solution: Make sure that the scrub brush is rotating properly and that the water tanks are filled with the correct amount of water. Also, make sure that you are using the right cleaning solution for your floor type.
• Problem: The floor scrubber is leaking water.
  Solution: Check the water tanks to make sure that they are securely fastened and that there are no cracks or damage. If the leak persists, contact Bissell for further assistance.
• Problem: The floor scrubber isn't charging.
  Solution: Make sure that the charger is plugged in securely and that the floor scrubber is turned off while charging. Also, make sure that the charging port is free of debris or damage. If the issue persists, contact Bissell for further assistance.
• Smear marks are made on the floor when polishing.
  • Has the polish/wax been allowed to dry?
  • Does an existing floor treatment need to be removed?
• No gloss sheen is being produced.
  • The floor polish/wax application level may need to be increased, try another coat. Allow to dry and re-polish.
  • Please note some types of floor do not produce a gloss finish.
• Scratches are made on the floor.
  • Check for grit or dirt stuck to the pads or on the rear wheels.
  • Clean/replace the pads or wipe the wheels free from debris.
• The floor is too slippery.
  • Check the polish/wax is designed to be used on floors. Good floor polish should always produce a glossy but grippy finish

Technical Data of Floor Scrubber BGFS650

• Power: 160W
• Voltage: 120V
• Frequency: 60Hz
• Rpm: 2,200
• Sound pressure: 80dB(A) approx

Warranty of Bissell Hercules Floor Scrubber 

This product is guaranteed for a period of 12 months against faulty materials and workmanship. While every possible care is taken by Bissell BigGreen Commerical Products to ensure that our products leave the factory in good working order, Bissell BigGreen Commerical Products cannot under any circumstances accept liability for problems or damage caused by their subsequent use. It is the responsibility of the user to ensure the surfaces to be treated or cleaned are suitable for vacuuming.

Pros & Cons of Bissell Hercules Floor Scrubber BGFS650

Pros

• Powerful 12 amp motor for deep cleaning
• Adjustable handle for user comfort
• 2-tank system for cleaner, healthier floors
• Built-in storage caddy for easy transport
• 2-year warranty for peace of mind

Cons

• May be too bulky for some users
• Can be heavy to carry for extended periods of time
• May require frequent emptying of dirty water tank

Customer Reviews about Bissell Hercules Floor Scrubber 

Customers love the Bissell Hercules Floor Scrubber for its powerful cleaning capabilities and easy-to-use design. Many users report that this floor scrubber has made their cleaning routine faster and easier, and that it leaves their floors looking and feeling cleaner than ever before. However, some users have noted that the floor scrubber can be heavy to carry for extended periods of time, and that the dirty water tank may need to be emptied frequently. Despite these minor complaints, the Hercules Floor Scrubber BGFS650 has received overwhelmingly positive reviews from customers, with many praising its versatility, ease of use, and powerful cleaning capabilities.