Charge It Wheel Charger: Complete Product Manual

Introduction to the Charge It Wheel Charger

The charge it Wheel Charger is a wheeled, shop-style battery charger designed to deliver fast charging, battery boosting, and engine-start support for 12-volt vehicle systems. Built for convenience and mobility, it combines multiple automatic charging rates with a compact wheeled frame, making it easy to move around a garage, repair bay, or fleet maintenance area. Its angled control panel improves visibility while adjusting settings or monitoring charge activity, which is especially useful in busy workspaces.

This charger is aimed at drivers, mechanics, fleet operators, and DIY users who need a reliable way to maintain car batteries, light trucks, and other 12-volt lead-acid batteries. It is also suitable for users who need occasional engine-start assistance when a battery is deeply discharged. The main appeal is versatility: the unit can handle routine charging, faster recovery charging, and short-duration starting support without requiring a separate booster device.

Typical pricing for the Charge It Wheel Charger class of products is generally in the mid-range shop-equipment category, often estimated around $120 to $250 depending on model, amperage, and retailer availability. Availability is commonly found through automotive tool suppliers, battery specialty stores, and major online marketplaces. For buyers comparing similar wheeled battery chargers, the strongest value points are portability, automatic charge modes, and engine-start capability in one unit.

Key Specifications and Performance for 12V Battery Charging

Product type: Wheeled battery charger and engine starter for 12-volt vehicle systems.
Charging rates: Multiple automatic rates, with output levels up to 40 amps for charging and 200 amps for engine-start assistance.
Power input: Standard 120V AC, 60 Hz shop power source.
Portability: Built with wheels and a compact frame for easy transport across a garage or service area.
Control layout: Angled front panel for easier viewing and faster setting selection.
Battery compatibility: Intended for 12-volt automotive batteries and similar lead-acid applications.
Best use cases: Routine charging, battery recovery, and short engine-start support for weak batteries.
Comparable products: Similar to other wheeled shop chargers such as 12V/24V intelligent wheeled chargers and manual wheel chargers, but the Charge It model stands out for its high-output boost capability and simpler transport design.

In practical terms, this type of charger is faster and more flexible than small plug-in maintainers, but less portable than a compact handheld charger. For users who need workshop-level power with mobility, it offers a strong balance of speed, convenience, and versatility.

Setup Guide for Charge It Wheel Charger

Before setup, place the charger on a stable, dry surface with enough ventilation around the unit. Make sure the charger is unplugged before attaching clamps. Select the correct voltage and charge rate for the battery type, and never begin charging if the battery voltage cannot be determined.

Turn the charger controls to the OFF position.
Connect the red clamp to the battery’s positive terminal.
Connect the black clamp to the vehicle chassis or engine block away from the battery, unless the manual for your specific setup states otherwise.
Plug the charger into a properly fused 120V AC outlet.
Select the appropriate charge mode or starting mode based on battery size and condition.
Monitor the charger during use and stop charging when complete.

For small batteries, use a lower charge setting to avoid overheating. If the charger shows no ammeter reading, confirm outlet power and clamp contact. Safety warnings include avoiding sparks near batteries, keeping the unit away from fuel lines, and never reversing polarity. If a battery is swollen, leaking, frozen, or physically damaged, do not charge it.

Pros and Cons of the Charge It Wheel Charger

Pros

Fast charging: Higher amperage output helps reduce wait time compared with basic maintainers.
Engine-start support: Useful when a vehicle battery is too weak for normal cranking.
Easy mobility: Wheels and a compact frame make shop transport simple.
Clear control visibility: Angled panel improves day-to-day usability.
Good value for workshops: One unit can cover charging, boosting, and recovery tasks.

Cons

Not ultra-portable: Larger than a small battery maintainer or trickle charger.
Requires AC power: Not suitable for remote roadside use without electricity.
Best for 12V systems: Less versatile than multi-voltage shop chargers.
More expensive than basic chargers: Better suited to frequent use than occasional charging.

Compared with cheaper alternatives, the Charge It Wheel Charger offers better performance and durability for garages, but casual users may prefer a smaller, lower-cost charger if they only need occasional battery maintenance.

Customer Reviews and User Feedback

Customer feedback for wheeled shop chargers in this category is generally positive, with many users rating them around 4.3 out of 5 stars for power, convenience, and ease of use. Reviewers commonly praise the strong charging output, reliable boost function, and the convenience of moving the unit around a workshop.

Typical testimonials mention that the charger is “easy to roll to any bay,” “quick to bring a weak battery back,” and “much more practical than a small home charger for garage work.” Common complaints include the unit’s size, the need for careful clamp placement, and the fact that it is overkill for users who only maintain one vehicle.

Purchase is most recommended for mechanics, fleet maintenance teams, and home users with multiple vehicles. If you need a dependable wheeled battery charger for regular use, this product is a strong choice. If you only need occasional battery maintenance, a compact automatic charger may be a better fit.

charge it Manuals

Read More