Introduction of Gila Window Tint Application Kit

The Gila Window Tint Application Kit is the perfect solution for those looking to tint their windows without the need for professional installation. Designed with ease-of-use in mind, this kit includes everything you need to tint your windows quickly and efficiently. With an estimated price range of $40 to $60, this kit is a cost-effective way to improve the look and functionality of your vehicle or home windows.

Tools Needed

(Sold in GILA Tool Kit)

GILA Window Film Application Solution
Ready to use for cleaning and application. Do not dilute or mix with wa
Squeegee and squeegee card
For smoothing the film
Utility knife
For trimming the film
GILA Edging Tool
To ensure a clean edge
Low-lint cloth
For cleaning the film and the glass (Household items)
Single-edged razor blade
For cleaning the glass
Ruler or tape measure: Scissparent tape

Detailed Specifications

The Gila Window Tint Application Kit includes the following key features:

Pre-cut tint pieces for a precise fit
Squeegee and applicator for easy application
Yellow felt applicator for removing excess adhesive
Complete installation solution with detailed instructions
Available in various tint shades and sizes to suit your needs

Description

The Gila Window Tint Application Kit is designed to provide a professional-looking window tint job without the need for a professional installer. The pre-cut tint pieces ensure a precise fit, while the squeegee and applicator make it easy to apply the tint smoothly and bubble-free. The yellow felt applicator helps remove excess adhesive, ensuring a clean and polished final result. The kit is available in various tint shades and sizes, making it suitable for a wide range of vehicles and home windows.

Gila Window Tint Application Kit CLEAN WINDOW

Generously spray the window with the Application Solution, use a razor blade to remove stubborn dirt or paint. Use special care cleaning the corners. Re wet the window, then squeegee downward. Wipe offaccumulated dirt from the window gasket with a soft cloth. If possible, clean the outside of the window for the best clarity.
Hint! Greasy or smoke-covered windows can be cleaned first with glass cleaner then rinsed thoroughly with the Application Solution. Apply film to cool shaded windows when glass temperature is between 45-90°F. For best results, do not apply in direct sunlight or freezing weather.

MEASURE AND CUT FILM

Unroll the film on a clean, flat surface. Carefully measure your window before cutting. Cut the film at least an inch larger than the glass on all four sides. The excess will be trimmed once film is applied.
Hint! Try to use at least one of the factory edges. Work in a dust- free area. Tum off fans.

IDENTIFY CLEAR LINER

Leaving the film on a clean, flat surface, select one corner of the film and attach two small pieces of transparent tape (3-4 inches) to each side - one on the film and one the liner. Leave some tape hanging over the corner of the film (about | inch). Press the two pieces of tape firmly together, then quickly pull them apart to begin separating the clear liner away from the film. You have identified the liner! Leave the tape in place and move to the next step.
Hint! Usually the liner is on the outside surface of the film roll. You may want to fold the ends of the tape over themselves to keep the two pieces of tape from sticking together.

WET WINDOW AND FILM

Lightly spray the Application Solution onto the inside surface of the window and both sides of the film. This helps reduce film curl and static electricity.
Hint! Have a helper hold the film by the edges while you spray. Flip the film over and repeat on the other side.

Gila Window Tint Application Kit REMOVE CLEAR LINER

Peel the two strips of tape apart to release the liner from the corner. As you begin to pull away the liner; spray the smooth side of the film with the Application Solution until the clear liner is removed and the smooth side is completely saturated. Try to keep the film from touching itself.
Hint! Have a helper hold the film while you peel the clear liner away and spray the smooth side of the film. Handle the film very carefully to prevent creasing.

APPLY FILM TO GLASS

Hold the film so that the smooth side is facing the window and apply to the glass. Use your hands to smooth the film out and position it so that the excess I" is overlapping the window on all four sides.
Hint! If you're using a factory edge, line that up to the window edge. For larger pieces of film, leave some of the liner on the film while you apply it to the glass. Once the film is in place, remove the liner completely.

SMOOTH FILM

Spray the entire surface of the film facing you with the Application Solution. Wrap your squeegee with a low- lint cloth. Lightly squeegee the centerline of the film from top to bottom to set it in place. Begin smoothing the film, starting at the top of the window. Squeegee from the center to the right side and work downward, leaving a 2" perimeter around the edges unsqueegeed. Repeat this process for the left side
Hint! If "fingers," or longer, larger bubbles, appear along any edge, wrap your squeegee with a low-lint cloth and carefully push the "fingers" toward the edge of the film. The cloth will absorb the excess water. The hard card squeegee works great for this.

Gila Window Tint Application Kit TRIM FILM

The GILA Edging Tool has a small slit along the edge. Place the utility knife in this slit and line knife and Edging Tool up to a top corner edge of the window. Slowly and firmly, pull the knife and Edging Tool down the window to trim the film. Re-position the knife and tools to get the corners. Gently pull the trimmed film away from the window. Repeat this process on all four edges of the film.

Hint! The GILA Edging Tool leaves a 1/1 6" gop between the film and the edge of the window, this gap is essential for the proper thermal expansion of the glass. Use a new blade after every 10 feet of film you cut. Cutting film causes the blade to dull quickly, which can tear the film.

SQUEEGEE DRY

Rewet the film and squeegee from the center to the right side, working from the top down. Repeat this process for the left side. Press firmly to remove all the water so that the film can cure clearly. If air bubbles are present, squeegee them out. Any remaining small water bubbles should evaporate as the film cures.

CORRECTING MISTAKES

You may notice imperfections such as air bubbles or debris between the film and the glass. Simply peel the affected area of the film away from the glass. Use the tip of your utility knife or squeegee to remove any debris or bubble. Re-spray the film and the glass with the Solution and re-apply to the glass.

ENJOY THE VIEW!
Great work. You have successfully applied your GILA Window Film. The film will fully "cure" over the next 7 to 10 days. Dry, sunny weather speeds curing. Any remaining small bubbles should disappear during this time.

Setup Guide

To set up the Gila Window Tint Application Kit, follow these steps:

Clean the windows thoroughly, removing any dirt or debris.
Cut the pre-cut tint pieces to the desired shape and size.
Apply the tint to the window using the squeegee and applicator, smoothing out any bubbles or wrinkles.
Use the yellow felt applicator to remove excess adhesive.
Allow the adhesive to dry for the recommended time before driving or operating the windows.

Gila Window Tint Application Kit Troubleshooting

If you encounter any issues during the installation process, consider the following common problems and solutions:

Bubbles or wrinkles: Gently lift the tint and reapply, using the squeegee to smooth out any bubbles or wrinkles.
Excess adhesive: Use the yellow felt applicator to remove any excess adhesive, being careful not to scratch the tint.
Poor fit: Double-check the measurements and shape of the pre-cut tint pieces before applying.
Warnings: Always follow the manufacturer's instructions and guidelines, and ensure proper ventilation during the installation process.

Pros & Cons

Pros

Easy to use with included tools
Cost-effective compared to professional installation
Precise fit with pre-cut tint pieces
Available in various tint shades and sizes

Cons

Installation may take some time and practice
May not achieve the same results as a professional installer

Customer Reviews about Gila Window Tint Application Kit

Customers have praised the Gila Window Tint Application Kit for its ease of use and high-quality results. Common compliments include the precision of the pre-cut tint pieces, the effectiveness of the included tools, and the cost-effectiveness compared to professional installation.

gila Manuals

Read More