Introduction of Cetylite CetylcideII Hard Surface Disinfectant 

CetylcideII Hard Surface Disinfectant is a powerful and effective disinfectant that kills a wide range of bacteria and viruses on hard surfaces. This Cetylite CetylcideII Hard Surface Disinfectant is perfect for use in hospitals, medical facilities, schools, offices, and homes. The estimated price of Cetylite CetylcideII Hard Surface Disinfectant is around $20 to $30 per gallon, and it is currently available in the market.

Detailed Specifications

Cetylite CetylcideII Hard Surface Disinfectant is a ready-to-use formula that does not require dilution. It is EPA-registered and has been proven to kill a broad spectrum of microorganisms, including MRSA, HIV-1, HBV, H1N1, and many others. It is safe to use on a variety of surfaces, such as countertops, door handles, light switches, and more. It has a contact time of just 1 minute for most bacteria and viruses, making it a fast and effective solution for disinfecting surfaces.

Description

Cetylite CetylcideII Hard Surface Disinfectant is a versatile and easy-to-use disinfectant that provides reliable protection against a wide range of microorganisms. Its EPA-registered formula ensures that it meets the highest standards of safety and effectiveness. The disinfectant has a fresh, clean scent that leaves surfaces smelling pleasant and inviting. It is also non-corrosive, non-flammable, and non-abrasive, making it safe to use on a variety of surfaces without causing damage or wear.

Setup of Cetylite CetylcideII Hard Surface Disinfectant 

To use Cetylite CetylcideII Hard Surface Disinfectant, simply follow these steps

1. Shake the bottle well before use.
2. Spray the disinfectant directly onto the surface you wish to clean.
3. Allow the disinfectant to sit on the surface for at least 1 minute.
4. Wipe the surface clean with a damp cloth or paper towel.
5. Dispose of any used clothes or paper towels properly.

DIRECTIONS FOR USE

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
To be used in hospitals in the following areas as a disinfectant: operating rooms, patient care rooms & facilities, recovery, anesthesia, ER, radiology, X-ray 
cat labs, newborn nurseries, orthopedics, respiratory therapy, surgicenters, labs, blood collection rooms, central supply, housekeeping & janitorial rooms, nursing homes, doctor’s offices & labs, dentist’s offices & labs (dental operatories). 
This product is not to be used as a terminal sterilant/high-level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.
In addition, this product may be used as a disinfectant in Mortuaries, Tattoo Parlors, Gyms, Tanning Spas, Pharmaceutical Manufacturing Facilities, Physician Offices, EMS & Fire Facilities, Home Health Care Institutions, Cruise Lines, Universities, Colleges, Hotels, Hospices, Day Care Centers, Barber/Beauty Shops, Health Clubs, Spas, Meat/Poultry/Food Processing Plants, Poultry Houses, Farms, Swine Farms, Dairies, Dog/Cat Animal Kennels, Veterinary Clinics, and Bathrooms.
This product can be used to disinfect the following inanimate, hard, non-porous non food environmental surfaces: walls, floors, sink tops, toilet bowls, table tops, counters, countertops, barber shop instruments and tools, appliances, tables, chairs, benches, telephones, chair arms, bed frames, cabinets, bathtubs, and urinals.
Meat/Poultry/Food Processing plants: Do not use on food contact/processing surfaces or before using this product, food products and packaging materials must be removed from the room or carefully protected. After use, all food contact surfaces in the area must be thoroughly rinsed with potable water. This product may be used in inedible product processing areas, non-pro-cessing areas and/or exterior areas without a rinse.

• BOTTLE USE-DILUTION: With both caps closed and the front label facing you, tilt the bottle counter-clockwise so the concentrate fills the measuring chamber. Tilt the bottle clockwise to allow any excess concentrate to return to the bottle leaving the desired amount in the measuring chamber. (The angular pour-back lines on the right side of the measuring scale may be used as a guide when tilting bottle clockwise to adjust to the desired amount). Open the left (slanted) cap to pour concentrate. Use at a dilution of 1:64 (2 ounces per gallon of water or 16 ml per liter).
• BACTERICIDAL STABILITY OF USE-DILUTION: Tests confirm that this product, when diluted in 400 ppm hard water and in the presence of 5% soil load, remains effective against Pseudomonas aeruginosa, Staphylococcus aureus, Salmonella (choleraesuis) enterica for up to 64 days when stored in a sealed container at room temperature. If the use-dilution product becomes visibly dirty or contaminated, the use-dilution must be discarded and a fresh product prepared. Always use clean, properly labeled dry containers when diluting the product. Bactericidal stability of the use-dilution does not apply to open containers such as buckets or pails. Use-dilution product in open containers must be prepared daily 
  or more often if the solution becomes visibly dirty or diluted or contaminated.
• DISINFECTION: Add two ounces of Cetylcide II  per gallon of water. Remove gross filth or heavy soil. For heavily soiled areas, a pre-cleaning step is required. Apply solution with a cloth, mop, sponge, hand pump trigger sprayer or other mechanical sprayer devices such that all surfaces remain wet for 10 minutes. Let air dry. Prepare a fresh solution for each use. Cetylcide II is effective in hard water up to 300 ppm hardness (calculated as CaCO3) and in the presence of organic soil (5% blood serum).
  This product, in the presence of a 98 % organic soil load, diluted 1:64 (2 ounces per gallon) in 791 ppm  Hard Water, demonstrated efficacy within 10 minutes against the following organisms: Staphylococcus aureus, Salmonella (choleraesuis) enterica. Note that the organisms referenced in the above statement are not associated with blood spills. For blood spills, the surface must be thoroughly cleaned before applying the disinfectant. 
• DISINFECT TOILET BOWLS: Flush toilet and add 2 ounces of Cetylcide II directly to the bowl water.  Swab the bowl completely using a scrub brush or toilet mop, making sure to get under the rim. Let  
  stand for 10 minutes and flush.
• DISINFECTION OF BARBER AND BEAUTY SHOP INSTRUMENTS & TOOLS: Thoroughly 
  pre-clean. Completely immerse brushes, combs,  scissors, clipper blades, razors, tweezers, manicure and other shop tools for 10 minutes (or longer as required by local authorities). Fresh solution should be prepared daily or more often when the solution becomes diluted or soiled. After disinfection, wipe dry the product as appropriate. 
  NOTE: Plastics may remain immersed until ready to use. Stainless steel shears and instruments must be removed after 10 minutes, rinsed, dried, and kept in a clean, non-contaminat-ed receptacle. Prolonged soaking may cause damage to metal instruments.

FOR VETERINARY, DOG/CAT ANIMAL  KENNEL, FARM PREMISE, SWINE FARM, DAIRY DISINFECTANT USE

1. Remove all animals and feed from premise, vehicles, and enclosures.
2. Remove all litter and manure from floors, walls and surfaces of barns, pens, stalls, chutes, and other facilities and fixtures occupied or traversed by animals.
3. Empty all troughs, racks, and other feeding and watering appliances.
4. Thoroughly clean all surfaces with soap or detergent and rinse with water.
5. Saturate all surfaces with the recommended disinfecting solution for a period of 10 minutes.
6. Immerse all halters, ropes, and other types of equipment used in handling and restraining animals, as well as forks, shovels, and scrapers used for removing litter and manure.
7. Ventilate buildings, cars, boats, and other closed spaces. Do not house livestock or employ equipment until treatment has been absorbed, set or dried.
8. Thoroughly scrub all treated feed racks, mangers, troughs, automatic feeders, fountains, and waterers with soap or detergent, and rinse with potable water before reuse.

FOR POULTRY HOUSE DISINFECTANT USE

1. Remove all poultry and feeds from premises, trucks, coops and crates.
2. Remove all litter and droppings from floors, walls and surfaces of facilities occupied or traversed by poultry.
3. Empty all troughs, racks, and other feeding and watering appliances.
4. Thoroughly clean all surfaces with soap or detergent and rinse with water.
5. Saturate all surfaces with the recommended disinfecting solution for a period of 10 minutes.
6. Ventilate buildings, coops, and other closed spaces. Do not house poultry or employ equipment until treatment has been absorbed, set or dried.
7. Thoroughly scrub all treated feed racks, troughs, automatic feeders, fountains, and waterers with soap or detergent, and rinse with potable water before reuse.

SANITIZATION NON-FOOD CONTACT SURFACES

Remove all gross filth or heavy soil prior to applying sanitizing solution. To sanitize walls, floors and other hard, nonporous surfaces in such areas as schools, institutions, and industries, use a mop, cloth or immerse item in a solution containing 2 ounces per gallon so as to wet all surfaces thoroughly for 1 minute.  Drain or air dry. Prepare a fresh solution daily or when solution gets visibly dirty.

• MILDEWSTAT
  Thoroughly clean surfaces prior to treatment. To control mold and mildew on pre-cleaned, hard, non-porous surfaces (such as floors, walls, table tops) add 2 ounces of Cetylcide II per gallon of water.  Apply solution with a cloth, mop, or sponge making sure to wet all surfaces completely. Let air dry. Prepare fresh solution for each use. Repeat application at weekly intervals or when mildew growth reappears.
• CLEANING AND DEODORIZATION 
  Cetylcide II deodorizes garbage storage areas, empty garbage bins and cans, toilet bowls and any other odor-causing areas. Mix 2 ounces per gallon of water and apply solution to surfaces. Be sure to thoroughly wet surfaces, allow to air dry.
• FUNGICIDE
  At 2 ounces per gallon, Cetylcide II is effective against the pathogenic fungus Trichophyton mentagrophytes in 5% organic soil load. Contact time - 10 minutes. Surfaces where this fungus is found: shower areas & stalls, bathroom floors, bathroom benches. 
  This product, in the presence of  a  ~100 % organic soil load, diluted 1:64 (2 ounces per gallon) in 395 ppm Hard Water, demonstrated efficacy within 10 minutes against the following pathogenic fungus: Trichophyton mentagrophytes.  Note that the organism referenced in the above statement is not associated with blood spills. For blood spills, the surface must be thoroughly cleaned before applying this product
• VIRUCIDAL: When used on inanimate, hard,
  non-porous, environmental surfaces at 2 ounces per gallon of water for a 10 minute contact time (5% organic soil), except for Poliovirus type 1 (Chat strain): which requires a 30 minute contact time (5% organic soil) and HIV-1 which requires only a 30 second contact time. This product, in the presence of a 98 % organic soil load,  diluted 1:64 (2 ounces per gallon) in 400 ppm Hard Water, demonstrated efficacy within 10 minutes against the following virus: Human Coronavirus. Note that the organism referenced in the above statement is not  associated with blood spills. For blood spills, the surface must be thoroughly cleaned before applying this product. 
• *KILLS HCV, HBV AND HIV-1 ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS
  in health care settings or other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood or body fluids, and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of HCV (Hepatitis C Virus), HBV (Hepatitis B Virus) or HIV-1 (AIDS virus).
• SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HCV, HBV AND HIV-1 OF SURFACES/OBJECTS SOILED WITH BLOOD/BODY FLUIDS
  • PERSONAL PROTECTION: Specific barrier protection items to be used when handling items soiled with blood or body fluids are disposable latex gloves, gowns, masks or eye coverings.
  • CLEANING PROCEDURE: Blood and other body fluids must be thoroughly cleaned from surfaces and objects before the application of the disinfectant.
• DISPOSAL OF INFECTIOUS MATERIALS
  Blood and other body fluids should be autoclaved and disposed of according to Federal, State and local regulations for infectious waste disposal.
• CONTACT TIME
  Leave surfaces wet for 30  seconds for HIV-1 and 10 minutes for HCV and HBV.  The contact time for the viruses, fungi and bacteria listed on this label is 10 minutes except for Polio virus Type 1 (Chat strain) which is 30 minutes. 
  This product is effective against the following microorganisms: Contact time is 10 minutes unless noted as below. 

Isolates From AIDS Patients

1. Aspergillus niger
2. Candida albicans 
3. Cryptococcus neoformans 
4. Pseudomonas aeruginosa 
5. Staphylococcus aureus 
6. Streptococcus pneumoniae
   Gram Positive Clinical Isolates
7. Enterococcus faecalis
8. Micrococcus luteus 
9. Staphylococcus aureus 
10. Staphylococcus aureus (Toxic shock) 
11. Staphylococcus epidermidis 
12. Staphylococcus saprophyticus 
13. Streptococcus haemolyticus
    Gram Negative Clinical Isolates
14. Acinetobacter calcoaceticus var. anitratus 
15. Acinetobacter calcoaceticus var. lwoffii 
16. Bordetella bronchiseptica 
17. Brevundimonas diminuta
18. Burkholderia cepacia
19. Enterobacter agglomerans
20. Enterobacter cloacae
21. Enterobacter gergoviae
22. Enterobacter liquefaciens
23. Escherichia coli (Urinary)
24. Escherichia coli (Wound) 
25. Flavobacterium meningosepticum 
26. Hafnia alvei
27. Klebsiella oxytoca
28. Klebsiella pneumoniae
29. Morganella morganii
30. Proteus mirabilis
31. Proteus vulgaris
32. Pseudomonas aeruginosa 
33. Pseudomonas fluorescens 
34. Pseudomonas pseudomallei 
35. Pseudomonas putida
36. Pseudomonas stutzeri
37. Serratia marcescens
38. Sphingomonas paucimobilis
    Other Bacteria
39. Actinobacillus pleuropneumoniae 
40. Actinomyces pyogenes
41. Bordetella bronchiseptica 
42. Burkholderia pickettii
43. Campylobacter jejuni 
44. Corynebacterium pseudotuberculosis 
45. Enterobacter aerogenes
46. Enterococcus faecalis
47. Enterococcus faecium
48. Enterococcus hirae
49. Escherichia coli
50. Escherichia coli strain 
51. O157:H7 Escherichia vulneris
52. Listeria monocytogenes
53. Pasteurella haemolytica 
54. Pseudomonas aeruginosa 
55. Rhodococcus equi
56. Salmonella (choleraesuis) enterica 
57. Salmonella schottmuelleri
58. Salmonella typhi
59. Staphylococcus aureus 
60. Staphylococcus auricularis 
61. Staphylococcus capitis 
62. Staphylococcus hominis 
63. Staphylococcus simulans 
64. Streptococcus equi var. equi 
65. Streptococcus equi var. zooepidermicus 
66. Streptococcus pyogenes 
67. Streptococcus salivarius
68. Yersinia enterocolitica 
    Pathogenic Fungi
69. Trichophyton mentagrophytes
    Environmental Fungi
70. Aspergillus candidus 
71. Aspergillus niger 
72. Penicillium chermesinum 
73. Penicillium oxalicum 
74. Penicillium spinulosum 
75. Ulocladium sp.
    Antibiotic-Resistant Gram Antibiotic-negative bacteria
76.  Enterobacteriaciae with extended beta-lactamase resistance (Ampicillin and Piperacillin Resistant) 
77. Escherichia coli (Ampicillin, Tetracycline) 
78. Klebsiella oxytoca (Ampicillin)
79. Klebsiella pneumoniae type 1 (Ampicillin,  Tetracycline)
    Antibiotic-Resistant Gram-Positive Bacteria
80.  Enterococcus faecalis (Vancomycin  Resistant-VRE)
81. Enterococcus faecium (Vancomycin   Resistant-VRE)
82. Staphylococcus aureus (Methicillin Resistant-MRSA, Penicillin, Ampicillin, Erythromycin, Oxacillin, Tetracycline Resistant, Community Associated Methicillin Resistant CA-MRSA Geno-type USA400, Community Associated Methicillin Resistant CA-MRSA PVL Positive, Vancomycin Resistant-VRSA)
83. Staphylococcus epidermidis (Ampicillin)
    Human Viruses
84.  Cytomegalovirus
85. HBV (Hepatitis B Virus)
86. HCV (Hepatitis C Virus)
87. Herpes Simplex type 2 Virus
88. HIV-1 (AIDS Virus)
89. Human Coronavirus
90. Influenza A/Brazil Virus
91. Influenza B Virus (Allen strain)
92. Influenza C Virus (Taylor strain) 
93. Measles Virus
94. Norovirus (Norwalk-like virus) 
95. Parainfluenza type 1
96. Poliovirus type 1 (Chat strain) 30 minutes  contact time
97. Respiratory Syncytial Virus
98. Rotavirus 
    Non-Human Viruses
99. Avian Influenza/Turkey/Wisconsin Virus
100. Canine Coronavirus
101. Equine Influenza
102. Feline Calicivirus
103. Infectious Bovine Rhinotracheitis (IBR)
104. Newcastle Disease Virus
105. Porcine Parvovirus
106. Pseudorabies Virus
107. Transmissible Gastroenteritis (TGE)
108. T1 bacteriophage
109. T4 bacteriophage
110. Bovine Viral Diarrhea Virus (BVDV)

PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS DANGER. KEEP OUT OF REACH OF CHILDREN. 
Corrosive. Causes irreversible eye damage and skin burns. Do not get in eyes, on skin, or on clothing.  Harmful if swallowed.  Wear protective eyewear (goggles, face shield or safety glasses). Wear protective clothing and rubber gloves.  Avoid contamination of food.  Wash thoroughly with soap and water after handling. Remove contaminated clothing and wash clothing before reuse. 
STATEMENT OF PRACTICAL TREATMENT 

• FIRST AID IF ON SKIN OR CLOTHING: Take off contaminated clothing.  Rinse skin immediately with plenty of water for 15-20 minutes.  Call a poison control center or doctor for treatment advice.
• IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice
• IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor.  Do not give anything by mouth to an unconscious person
• IF INHALED:  Move person to fresh air. If a person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth, if possible. Call a poison control center or doctor for further treatment advice. Have the product container or label with you when calling a poison control center or doctor, or going for treatment. 

Troubleshooting

If you encounter any problems while using CetylcideII Hard Surface Disinfectant, try these solutions

• The disinfectant is not killing bacteria or viruses: Make sure you are allowing the disinfectant to sit on the surface for at least 1 minute before wiping it away. This is the recommended contact time for most microorganisms.
• The disinfectant is leaving a residue on surfaces: Make sure you are wiping the surface clean with a damp cloth or paper towel after using the disinfectant. If a residue persists, try diluting the disinfectant with water according to the manufacturer's instructions.
• The disinfectant is causing damage to surfaces: Make sure you are not using the disinfectant on surfaces that are not recommended by the manufacturer, such as painted surfaces or fabrics. Always test the disinfectant on a small, hidden area of the surface before using it on a larger area.

Pros & Cons

Pros

• Effective against a wide range of bacteria and viruses
• The EPA-registered formula ensures safety and effectiveness
• Non-corrosive, non-flammable, and non-abrasive
• Fresh, clean scent
• The ready-to-use formula does not require dilution

Cons

• May leave a residue on surfaces if not wiped away properly
• May not be effective against all microorganisms if not used according to the manufacturer's instructions

Customer Reviews of Cetylite CetylcideII Hard Surface Disinfectant 

Customers have praised CetylcideII Hard Surface Disinfectant for its effectiveness against a wide range of microorganisms, as well as its pleasant scent and easy-to-use formula. The few complaints have centered around the product's tendency to leave a residue on surfaces if not wiped away properly.