Introduction of Cetylite CetylcideII Hard Surface Disinfectant

CetylcideII Hard Surface Disinfectant is a powerful and effective disinfectant that kills a wide range of bacteria and viruses on hard surfaces. This Cetylite CetylcideII Hard Surface Disinfectant is perfect for use in hospitals, medical facilities, schools, offices, and homes. The estimated price of Cetylite CetylcideII Hard Surface Disinfectant is around $20 to $30 per gallon, and it is currently available in the market.

Detailed Specifications

Cetylite CetylcideII Hard Surface Disinfectant is a ready-to-use formula that does not require dilution. It is EPA-registered and has been proven to kill a broad spectrum of microorganisms, including MRSA, HIV-1, HBV, H1N1, and many others. It is safe to use on a variety of surfaces, such as countertops, door handles, light switches, and more. It has a contact time of just 1 minute for most bacteria and viruses, making it a fast and effective solution for disinfecting surfaces.

Description

Cetylite CetylcideII Hard Surface Disinfectant is a versatile and easy-to-use disinfectant that provides reliable protection against a wide range of microorganisms. Its EPA-registered formula ensures that it meets the highest standards of safety and effectiveness. The disinfectant has a fresh, clean scent that leaves surfaces smelling pleasant and inviting. It is also non-corrosive, non-flammable, and non-abrasive, making it safe to use on a variety of surfaces without causing damage or wear.

Setup of Cetylite CetylcideII Hard Surface Disinfectant

To use Cetylite CetylcideII Hard Surface Disinfectant, simply follow these steps

Shake the bottle well before use.
Spray the disinfectant directly onto the surface you wish to clean.
Allow the disinfectant to sit on the surface for at least 1 minute.
Wipe the surface clean with a damp cloth or paper towel.
Dispose of any used clothes or paper towels properly.

DIRECTIONS FOR USE

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
To be used in hospitals in the following areas as a disinfectant: operating rooms, patient care rooms & facilities, recovery, anesthesia, ER, radiology, X-ray
cat labs, newborn nurseries, orthopedics, respiratory therapy, surgicenters, labs, blood collection rooms, central supply, housekeeping & janitorial rooms, nursing homes, doctor’s offices & labs, dentist’s offices & labs (dental operatories).
This product is not to be used as a terminal sterilant/high-level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.
In addition, this product may be used as a disinfectant in Mortuaries, Tattoo Parlors, Gyms, Tanning Spas, Pharmaceutical Manufacturing Facilities, Physician Offices, EMS & Fire Facilities, Home Health Care Institutions, Cruise Lines, Universities, Colleges, Hotels, Hospices, Day Care Centers, Barber/Beauty Shops, Health Clubs, Spas, Meat/Poultry/Food Processing Plants, Poultry Houses, Farms, Swine Farms, Dairies, Dog/Cat Animal Kennels, Veterinary Clinics, and Bathrooms.
This product can be used to disinfect the following inanimate, hard, non-porous non food environmental surfaces: walls, floors, sink tops, toilet bowls, table tops, counters, countertops, barber shop instruments and tools, appliances, tables, chairs, benches, telephones, chair arms, bed frames, cabinets, bathtubs, and urinals.
Meat/Poultry/Food Processing plants: Do not use on food contact/processing surfaces or before using this product, food products and packaging materials must be removed from the room or carefully protected. After use, all food contact surfaces in the area must be thoroughly rinsed with potable water. This product may be used in inedible product processing areas, non-pro-cessing areas and/or exterior areas without a rinse.

BOTTLE USE-DILUTION: With both caps closed and the front label facing you, tilt the bottle counter-clockwise so the concentrate fills the measuring chamber. Tilt the bottle clockwise to allow any excess concentrate to return to the bottle leaving the desired amount in the measuring chamber. (The angular pour-back lines on the right side of the measuring scale may be used as a guide when tilting bottle clockwise to adjust to the desired amount). Open the left (slanted) cap to pour concentrate. Use at a dilution of 1:64 (2 ounces per gallon of water or 16 ml per liter).
BACTERICIDAL STABILITY OF USE-DILUTION: Tests confirm that this product, when diluted in 400 ppm hard water and in the presence of 5% soil load, remains effective against Pseudomonas aeruginosa, Staphylococcus aureus, Salmonella (choleraesuis) enterica for up to 64 days when stored in a sealed container at room temperature. If the use-dilution product becomes visibly dirty or contaminated, the use-dilution must be discarded and a fresh product prepared. Always use clean, properly labeled dry containers when diluting the product. Bactericidal stability of the use-dilution does not apply to open containers such as buckets or pails. Use-dilution product in open containers must be prepared daily
or more often if the solution becomes visibly dirty or diluted or contaminated.
DISINFECTION: Add two ounces of Cetylcide II per gallon of water. Remove gross filth or heavy soil. For heavily soiled areas, a pre-cleaning step is required. Apply solution with a cloth, mop, sponge, hand pump trigger sprayer or other mechanical sprayer devices such that all surfaces remain wet for 10 minutes. Let air dry. Prepare a fresh solution for each use. Cetylcide II is effective in hard water up to 300 ppm hardness (calculated as CaCO3) and in the presence of organic soil (5% blood serum).
This product, in the presence of a 98 % organic soil load, diluted 1:64 (2 ounces per gallon) in 791 ppm Hard Water, demonstrated efficacy within 10 minutes against the following organisms: Staphylococcus aureus, Salmonella (choleraesuis) enterica. Note that the organisms referenced in the above statement are not associated with blood spills. For blood spills, the surface must be thoroughly cleaned before applying the disinfectant.
DISINFECT TOILET BOWLS: Flush toilet and add 2 ounces of Cetylcide II directly to the bowl water. Swab the bowl completely using a scrub brush or toilet mop, making sure to get under the rim. Let
stand for 10 minutes and flush.
DISINFECTION OF BARBER AND BEAUTY SHOP INSTRUMENTS & TOOLS: Thoroughly
pre-clean. Completely immerse brushes, combs, scissors, clipper blades, razors, tweezers, manicure and other shop tools for 10 minutes (or longer as required by local authorities). Fresh solution should be prepared daily or more often when the solution becomes diluted or soiled. After disinfection, wipe dry the product as appropriate.
NOTE: Plastics may remain immersed until ready to use. Stainless steel shears and instruments must be removed after 10 minutes, rinsed, dried, and kept in a clean, non-contaminat-ed receptacle. Prolonged soaking may cause damage to metal instruments.

FOR VETERINARY, DOG/CAT ANIMAL KENNEL, FARM PREMISE, SWINE FARM, DAIRY DISINFECTANT USE

Remove all animals and feed from premise, vehicles, and enclosures.
Remove all litter and manure from floors, walls and surfaces of barns, pens, stalls, chutes, and other facilities and fixtures occupied or traversed by animals.
Empty all troughs, racks, and other feeding and watering appliances.
Thoroughly clean all surfaces with soap or detergent and rinse with water.
Saturate all surfaces with the recommended disinfecting solution for a period of 10 minutes.
Immerse all halters, ropes, and other types of equipment used in handling and restraining animals, as well as forks, shovels, and scrapers used for removing litter and manure.
Ventilate buildings, cars, boats, and other closed spaces. Do not house livestock or employ equipment until treatment has been absorbed, set or dried.
Thoroughly scrub all treated feed racks, mangers, troughs, automatic feeders, fountains, and waterers with soap or detergent, and rinse with potable water before reuse.

FOR POULTRY HOUSE DISINFECTANT USE

Remove all poultry and feeds from premises, trucks, coops and crates.
Remove all litter and droppings from floors, walls and surfaces of facilities occupied or traversed by poultry.
Empty all troughs, racks, and other feeding and watering appliances.
Thoroughly clean all surfaces with soap or detergent and rinse with water.
Saturate all surfaces with the recommended disinfecting solution for a period of 10 minutes.
Ventilate buildings, coops, and other closed spaces. Do not house poultry or employ equipment until treatment has been absorbed, set or dried.
Thoroughly scrub all treated feed racks, troughs, automatic feeders, fountains, and waterers with soap or detergent, and rinse with potable water before reuse.

SANITIZATION NON-FOOD CONTACT SURFACES

Remove all gross filth or heavy soil prior to applying sanitizing solution. To sanitize walls, floors and other hard, nonporous surfaces in such areas as schools, institutions, and industries, use a mop, cloth or immerse item in a solution containing 2 ounces per gallon so as to wet all surfaces thoroughly for 1 minute. Drain or air dry. Prepare a fresh solution daily or when solution gets visibly dirty.

MILDEWSTAT
Thoroughly clean surfaces prior to treatment. To control mold and mildew on pre-cleaned, hard, non-porous surfaces (such as floors, walls, table tops) add 2 ounces of Cetylcide II per gallon of water. Apply solution with a cloth, mop, or sponge making sure to wet all surfaces completely. Let air dry. Prepare fresh solution for each use. Repeat application at weekly intervals or when mildew growth reappears.
CLEANING AND DEODORIZATION
Cetylcide II deodorizes garbage storage areas, empty garbage bins and cans, toilet bowls and any other odor-causing areas. Mix 2 ounces per gallon of water and apply solution to surfaces. Be sure to thoroughly wet surfaces, allow to air dry.
FUNGICIDE
At 2 ounces per gallon, Cetylcide II is effective against the pathogenic fungus Trichophyton mentagrophytes in 5% organic soil load. Contact time - 10 minutes. Surfaces where this fungus is found: shower areas & stalls, bathroom floors, bathroom benches.
This product, in the presence of a ~100 % organic soil load, diluted 1:64 (2 ounces per gallon) in 395 ppm Hard Water, demonstrated efficacy within 10 minutes against the following pathogenic fungus: Trichophyton mentagrophytes. Note that the organism referenced in the above statement is not associated with blood spills. For blood spills, the surface must be thoroughly cleaned before applying this product
VIRUCIDAL: When used on inanimate, hard,
non-porous, environmental surfaces at 2 ounces per gallon of water for a 10 minute contact time (5% organic soil), except for Poliovirus type 1 (Chat strain): which requires a 30 minute contact time (5% organic soil) and HIV-1 which requires only a 30 second contact time. This product, in the presence of a 98 % organic soil load, diluted 1:64 (2 ounces per gallon) in 400 ppm Hard Water, demonstrated efficacy within 10 minutes against the following virus: Human Coronavirus. Note that the organism referenced in the above statement is not associated with blood spills. For blood spills, the surface must be thoroughly cleaned before applying this product.
*KILLS HCV, HBV AND HIV-1 ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS
in health care settings or other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood or body fluids, and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of HCV (Hepatitis C Virus), HBV (Hepatitis B Virus) or HIV-1 (AIDS virus).
SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HCV, HBV AND HIV-1 OF SURFACES/OBJECTS SOILED WITH BLOOD/BODY FLUIDS
- PERSONAL PROTECTION: Specific barrier protection items to be used when handling items soiled with blood or body fluids are disposable latex gloves, gowns, masks or eye coverings.
- CLEANING PROCEDURE: Blood and other body fluids must be thoroughly cleaned from surfaces and objects before the application of the disinfectant.
DISPOSAL OF INFECTIOUS MATERIALS
Blood and other body fluids should be autoclaved and disposed of according to Federal, State and local regulations for infectious waste disposal.
CONTACT TIME
Leave surfaces wet for 30 seconds for HIV-1 and 10 minutes for HCV and HBV. The contact time for the viruses, fungi and bacteria listed on this label is 10 minutes except for Polio virus Type 1 (Chat strain) which is 30 minutes.
This product is effective against the following microorganisms: Contact time is 10 minutes unless noted as below.

Isolates From AIDS Patients

Aspergillus niger
Candida albicans
Cryptococcus neoformans
Pseudomonas aeruginosa
Staphylococcus aureus
Streptococcus pneumoniae
Gram Positive Clinical Isolates
Enterococcus faecalis
Micrococcus luteus
Staphylococcus aureus
Staphylococcus aureus (Toxic shock)
Staphylococcus epidermidis
Staphylococcus saprophyticus
Streptococcus haemolyticus
Gram Negative Clinical Isolates
Acinetobacter calcoaceticus var. anitratus
Acinetobacter calcoaceticus var. lwoffii
Bordetella bronchiseptica
Brevundimonas diminuta
Burkholderia cepacia
Enterobacter agglomerans
Enterobacter cloacae
Enterobacter gergoviae
Enterobacter liquefaciens
Escherichia coli (Urinary)
Escherichia coli (Wound)
Flavobacterium meningosepticum
Hafnia alvei
Klebsiella oxytoca
Klebsiella pneumoniae
Morganella morganii
Proteus mirabilis
Proteus vulgaris
Pseudomonas aeruginosa
Pseudomonas fluorescens
Pseudomonas pseudomallei
Pseudomonas putida
Pseudomonas stutzeri
Serratia marcescens
Sphingomonas paucimobilis
Other Bacteria
Actinobacillus pleuropneumoniae
Actinomyces pyogenes
Bordetella bronchiseptica
Burkholderia pickettii
Campylobacter jejuni
Corynebacterium pseudotuberculosis
Enterobacter aerogenes
Enterococcus faecalis
Enterococcus faecium
Enterococcus hirae
Escherichia coli
Escherichia coli strain
O157:H7 Escherichia vulneris
Listeria monocytogenes
Pasteurella haemolytica
Pseudomonas aeruginosa
Rhodococcus equi
Salmonella (choleraesuis) enterica
Salmonella schottmuelleri
Salmonella typhi
Staphylococcus aureus
Staphylococcus auricularis
Staphylococcus capitis
Staphylococcus hominis
Staphylococcus simulans
Streptococcus equi var. equi
Streptococcus equi var. zooepidermicus
Streptococcus pyogenes
Streptococcus salivarius
Yersinia enterocolitica
Pathogenic Fungi
Trichophyton mentagrophytes
Environmental Fungi
Aspergillus candidus
Aspergillus niger
Penicillium chermesinum
Penicillium oxalicum
Penicillium spinulosum
Ulocladium sp.
Antibiotic-Resistant Gram Antibiotic-negative bacteria
Enterobacteriaciae with extended beta-lactamase resistance (Ampicillin and Piperacillin Resistant)
Escherichia coli (Ampicillin, Tetracycline)
Klebsiella oxytoca (Ampicillin)
Klebsiella pneumoniae type 1 (Ampicillin, Tetracycline)
Antibiotic-Resistant Gram-Positive Bacteria
Enterococcus faecalis (Vancomycin Resistant-VRE)
Enterococcus faecium (Vancomycin Resistant-VRE)
Staphylococcus aureus (Methicillin Resistant-MRSA, Penicillin, Ampicillin, Erythromycin, Oxacillin, Tetracycline Resistant, Community Associated Methicillin Resistant CA-MRSA Geno-type USA400, Community Associated Methicillin Resistant CA-MRSA PVL Positive, Vancomycin Resistant-VRSA)
Staphylococcus epidermidis (Ampicillin)
Human Viruses
Cytomegalovirus
HBV (Hepatitis B Virus)
HCV (Hepatitis C Virus)
Herpes Simplex type 2 Virus
HIV-1 (AIDS Virus)
Human Coronavirus
Influenza A/Brazil Virus
Influenza B Virus (Allen strain)
Influenza C Virus (Taylor strain)
Measles Virus
Norovirus (Norwalk-like virus)
Parainfluenza type 1
Poliovirus type 1 (Chat strain) 30 minutes contact time
Respiratory Syncytial Virus
Rotavirus
Non-Human Viruses
Avian Influenza/Turkey/Wisconsin Virus
Canine Coronavirus
Equine Influenza
Feline Calicivirus
Infectious Bovine Rhinotracheitis (IBR)
Newcastle Disease Virus
Porcine Parvovirus
Pseudorabies Virus
Transmissible Gastroenteritis (TGE)
T1 bacteriophage
T4 bacteriophage
Bovine Viral Diarrhea Virus (BVDV)

PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS DANGER. KEEP OUT OF REACH OF CHILDREN.
Corrosive. Causes irreversible eye damage and skin burns. Do not get in eyes, on skin, or on clothing. Harmful if swallowed. Wear protective eyewear (goggles, face shield or safety glasses). Wear protective clothing and rubber gloves. Avoid contamination of food. Wash thoroughly with soap and water after handling. Remove contaminated clothing and wash clothing before reuse.
STATEMENT OF PRACTICAL TREATMENT

FIRST AID IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice.
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice
IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious person
IF INHALED: Move person to fresh air. If a person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth, if possible. Call a poison control center or doctor for further treatment advice. Have the product container or label with you when calling a poison control center or doctor, or going for treatment.

Troubleshooting

If you encounter any problems while using CetylcideII Hard Surface Disinfectant, try these solutions

The disinfectant is not killing bacteria or viruses: Make sure you are allowing the disinfectant to sit on the surface for at least 1 minute before wiping it away. This is the recommended contact time for most microorganisms.
The disinfectant is leaving a residue on surfaces: Make sure you are wiping the surface clean with a damp cloth or paper towel after using the disinfectant. If a residue persists, try diluting the disinfectant with water according to the manufacturer's instructions.
The disinfectant is causing damage to surfaces: Make sure you are not using the disinfectant on surfaces that are not recommended by the manufacturer, such as painted surfaces or fabrics. Always test the disinfectant on a small, hidden area of the surface before using it on a larger area.

Pros & Cons

Pros

Effective against a wide range of bacteria and viruses
The EPA-registered formula ensures safety and effectiveness
Non-corrosive, non-flammable, and non-abrasive
Fresh, clean scent
The ready-to-use formula does not require dilution

Cons

May leave a residue on surfaces if not wiped away properly
May not be effective against all microorganisms if not used according to the manufacturer's instructions

Customer Reviews of Cetylite CetylcideII Hard Surface Disinfectant

Customers have praised CetylcideII Hard Surface Disinfectant for its effectiveness against a wide range of microorganisms, as well as its pleasant scent and easy-to-use formula. The few complaints have centered around the product's tendency to leave a residue on surfaces if not wiped away properly.

cetylite Manuals

Read More