Evenflo Victory Stroller Travel System 46612402C Introduction

This travel system consists of a lightweight, maneuverable stroller and a suitable infant car seat, allowing for a smooth transition from car to stroller. The Evenflo Victory Stroller Travel System, which has a multi-position recline, spacious storage basket, and adjustable canopy, ensures your baby's comfort and safety on all of your outings. This system is ideal for both everyday use and travel, making life easier for parents on the road. The estimated price of this product is around $349.99, and it was launched in 2021.

IDENTIFICATION OF PARTS

Detailed Specifications

The Evenflo Victory Travel System Stroller has several key features that make it stand out from its competitors. 

Here are some of its specifications: 

• Weight capacity: 5-35 pounds 
• Product weight: 22.5 pounds 
• Folded dimensions: 23.5 x 18.5 x 34 inches 
• Adjustable handle height: 38-42 inches 
• Front-wheel suspension for a smooth ride 
• Multi-position reclining seat 
• Extra-large canopy with peek-a-boo window 
• Removable and machine-washable seat pad 
• Easy-to-clean tray with cup holders 
• Parent tray with two deep cup holders and a storage compartment

FEATURES

1. Parent’s Handle
2. Canopy
3. Shoulder Straps
4. Harness Covers
5. Car Seat Mounts
6. Child’s Tray
7. Footrest
8. Swivel Wheel
9. Waist Restraint
10. Storage Basket
11. Parent’s Console
12. Wrist (Tether) Strap
13. Recline Strap
14. Brakes
15. Side Frame Lock

IMPORTANT INFORMATION

Child Requirements

• Maximum weight: 50 lbs (22.6 kg)
• Maximum height: 38 inches (96 cm)
• Stroller is for use with children who can sit up unassisted, and is NOT recommended for newborns.

Description

Evenflo Victory Travel System Stroller is for parents who desire a reliable, easy-to-use stroller for infants to toddlers. Lightweight and compact, the stroller is easy to handle and stow in confined situations. Rear-facing, 5-35-pound infant car seat included with stroller. Installation and removal are simple, and the adjustable handle height makes it comfortable for parents of different heights. Children can sit upright or recline in the stroller's multi-position reclining seat. Enjoy shade and watch your youngster with the extra-large canopy with peek-a-boo window. The tray with cup holders keeps your child's snacks and drinks close, and the removable, machine-washable seat pad makes cleaning easy. You may store your phone, keys, and other things on the parent tray with two deep cup holders and a storage compartment. One-handed folding and unfolding make the stroller easy to use, and front-wheel suspension makes it smooth.

ASSEMBLING YOUR STROLLER

1. WARNING: Care must be taken when folding or unfolding stroller to prevent finger injury in hinge areas. To protect flooring, place a protective covering (cardboard, towel, small rug or blanket) beneath the stroller during assembly.  Unlatch side frame lock A.  Continue holding the lock open  while unfolding the stroller.
   Grab the parent’s handle B near the top of the canopy and pull upward until the stroller opens fully with an audible click. Make sure the stroller locks in the open position.

   

2. NOTE: Hardware for front wheel assembly is located on wheel.
   Turn the stroller upside down so the front of the stroller is facing upwards, as shown.
   Loosen the nut on each side so that the forks C will fit under the silver tabs D. Slide the front wheel onto the forks. Ensure the silver tabs fit into the openings on the forks as shown. Use the wrench tool E to tighten both nuts.
   DO NOT inflate tires above the maximum recommended inflation pressure listed on the side of the tire. Over inflation may cause wheel and/or tire to blowout and could result in serious injury. Use manual bicycle pump to inflate tires.
   WARNING FALL HAZARD
   Wheel can detach and cause tip over. Pull on the wheel to assure it is securely attached. Periodically check wheel to assure it is securely attached.

   

3. Push rear wheel post F into opening on rear axle G. Make sure wheel locks into position with an audible click. Pull on wheel to make sure it is locked securely. Repeat on other side.
   DO NOT inflate tires above the maximum recommended inflation pressure listed on the side of the tire. Over inflation may cause wheel and/or tire to blowout and could result in serious injury. Use manual bicycle pump to inflate tires.

   

4. To remove rear wheel, turn stroller upside down. Push on release button H while pulling on wheel. Repeat on other side.

   

5. To attach child’s tray, push posts I into openings J on stroller. Make sure tray locks into position with an audible click.
   To remove the tray, push buttons K under tray while pulling on tray.

   

USING YOUR STROLLER  

1. Push or pull on tab L until it clicks, allowing wheel to swivel. With the wheel straight, push or pull tab until it clicks to keep the wheel from swiveling.

   

   NOTE: Either locked position is recommended for travel over uneven surfaces. 
   When jogging, wheel should be locked inward.
   WARNING: FALL HAZARD from tip over. Before running, jogging, or walking fast, LOCK the front wheel from swiveling.

2. Step on both rear brake levers M to lock the rear wheels on the stroller. 
   To release the brakes, lift up on both brake levers.

   

3. WARNING
   To avoid serious injury, DO NOT raise or recline seat with child in stroller.
   To recline seat, squeeze and slide the adjuster down N .
   To raise the seat, hold the D-ring O on strap, then slide the adjuster toward the seat.

   

4. USING YOUR STROLLER HARNESS

   WARNING: To avoid serious injury from falling or sliding out, ALWAYS  use  waist restraint.

   Note: Verify the stroller is locked in the open position by lifting up the rear of the stroller using the parent’s handle. 
   Lock the rear brakes and remove the tray (page 8). 

   • 5-point Harness:
     The harness shoulder straps P must be at shoulder height or lower, closest to the baby’s shoulders Q.
     Place the baby in the seat and bring the crotch panel R  up between  the child’s legs. Fasten each buckle S. For a snug, comfortable fit, pull the shoulder straps P to tighten the shoulder restraint and pull the waist restraint straps T to tighten the waist restraint.
     Note:
     • To loosen the waist straps T, push in the release button U on the buckle and pull. 
     • To loosen shoulder straps push up on the retainer V while pulling down on the shoulder strap.
     • Once the child is properly restrained, re-attach the tray.  
     • Make sure the tray locks into position with audible clicks. 
     • Pull on the tray to make sure it is locked into place.

   • 3-point Harness:
     To change from 5-point to 3-point harness:
     Unlock the Harness: Depress button W as shown. Remove harness shoulder strap P from each buckle S, as shown.  
     Store shoulder harness straps for future use.

     

5.  Pull canopy hoop X forward to extend canopy. Push canopy toward parent’s handle to close.

6. WARNING: Care must be taken when folding or unfolding stroller to prevent finger injury in hinge areas. To fold the stroller, lock the rear brakes, close the canopy, position front wheel inward, and remove your child.  Place thumb or index finger through plastic ring and other fingers around the in-seat fold strap.  See image.  Pull upward on both until side frame lock clicks into place.
   To unfold the stroller,  unlatch the side frame lock.  Continue holding the lock open while unfolding the stroller.   Grab the parent’s handle near the top of the canopy and pull upward until the stroller opens fully with an audible click. Make sure the stroller locks in the open position (page 3).

   

USING YOUR STROLLER WITH THE LITEMAX INFANT CAR SEAT

WARNING

• Only use Evenflo SafeMax™ and LiteMax™ infant car seats with this stroller. Other infant car seats or carriers are not designed to fit the stroller frame and may result in serious injury to your child if used with this stroller.
• To assure safety for your baby, please refer to the manufacturer’s instructions for the use of your infant car seat and keep all instructions available for reference.
• DO NOT lift stroller by using the infant car seat handle when installed on stroller.
• DO NOT use stroller for jogging while infant car seat is in stroller.
• If unable to securely attach infant car seat to this stroller, remove the car seat .
• To avoid serious injury to the child, when the infant car seat is in the stroller, make sure the infant car seat is securely snapped into the car seat mounts.
• Some Evenflo SafeMax™ and LiteMax™ infant car seats have a blanket/boot option that must be removed for proper attachment to this stroller. 

1. Fully recline the stroller seat back (page 5).
2. Make sure the child’s tray is securely latched (page 4).
3. Rotate both car seat mounts A inward as shown.
4. The infant car seat B MUST be in the rear-facing position. Position infant car seat over the stroller. Touch rear vertical surface C of infant car seat against rear vertical surface D of child tray. Lower the infant car seat down into the stroller and push down on handle. Infant car seat will click when fully locked into place.

5. Pull up on the infant car seat handle to test that it is properly locked into place.

   

CHECKLIST FOR PROPER INSTALLATION

• Make sure the infant car seat B is in the rear-facing position.
• Make sure the infant car seat is securely locked into the car seat mounts A and resting on the child tray D.

• Pull up on the infant car seat to test that it is properly locked into place.

  

• To remove the infant car seat, pull the release handle E with one hand while lifting up on the carry handle F with the other hand.

CARE AND MAINTENANCE 

• Clean minor spills and stains on cloth or plastic surfaces with cold water and mild soap. Air dry.
• Metal and plastic parts can be wiped clean with a soft damp cloth and dried with a soft cloth. DO NOT use abrasive cleaners or solvents.
• An occasional drop of vegetable oil may reduce wear and tear on moving parts.
• Periodically check front wheel to assure it is securely attached (page 3).

Troubleshooting

Here are some common problems and solutions for the Evenflo Victory Travel System Stroller: 

• Problem: The stroller is hard to steer. 
  Solution: Make sure the front wheels are locked in place, and check for any obstructions that may be causing resistance. 
• Problem: The stroller won't fold properly. 
  Solution: Make sure you're following the proper folding instructions, and ensure that the stroller is completely empty before folding. 
• Problem: The car seat is difficult to install. 
  Solution: Follow the installation instructions carefully, and make sure the base is level and secure.

WARRANTY 

For a period of 90 days from the original purchase of this Product, Evenflo warrants to the original end user (“Purchaser”) this Product (including any accessories) against defects in material or workmanship. Evenflo’s sole obligation under this express limited warranty shall be, at Evenflo’s option, to repair or replace any Product that is determined to be defective by Evenflo and determined to be covered by this warranty.

Pros & Cons

• Pros:
  • Lightweight and compact
  • Comes with an infant car seat
  • Adjustable handle height
  • Multi-position reclining seat
  • Easy to clean
• Cons:
  • May be too small for taller or heavier children
  • The parent tray can be difficult to remove
  • The stroller may tip over if the child leans too far to one side