Evenflo Infant Car Seat Adapter 630060 Introduction

This adapter firmly attaches your baby car seat to the stroller frame, resulting in a seamless travel system. The Evenflo Infant Car Seat Adapter 630060 is simple to install and remove, making it a safe and convenient choice for parents on the go. It ensures a smooth transition from car to stroller for your child. Although pricing and launching dates may vary depending on your location, expect an average cost of $71.49 and availability in most baby gear retailers.

Detailed Specifications

The Evenflo Infant Car Seat Adapter comes with a sleek and durable design, weighing approximately 2 lbs.

• Compatible with specific Evenflo stroller models such as the Vive, Pivot, and Sibby.
• Accommodates Evenflo car seats including Embrace, SafeMax, and Advance.
• Easy-to-attach mechanism for a secure fit.
• Breathable and soft padding for extra comfort.
• Adapter frame manufactured with safety and stability in mind.

IDENTIFICATION OF PARTS

IMPORTANT INFORMATION 

Child Requirements 
ALWAYS FOLLOW THE INFANT CAR SEAT MANUFACTURER’S INSTRUCTIONS. Do not exceed the manufacturer’s instructions for the maximum load-carrying capacity of the infant car seat.

Description

With the help of Evenflo's Infant Car Seat Adapter, parents can now effortlessly transition their sleeping infant from their stroller into a travel system. Embrace, SafeMax, and Advance are among the Evenflo car seats that are compatible with the adapter's compatibility list, which also includes models like the Evenflo Vive, Pivot, and Sibby.

The lightweight design and soft cushioning of the adapter enhance comfort and ventilation, and its quick and simple operation guarantees a stable connection between stroller and car seat. You and your child may travel more conveniently and hassle-free when you use the Evenflo Infant Car Seat Adapter.

How to Attach Evenflo Infant Car Seat Adapter 630060

ATTACHING GRACO SNUGRIDE, OR CHICCO KEYFIT INFANT CAR SEAT ONTO A SINGLE STROLLER

WARNING INJURY can occur.DEATH or SERIOUS
ALWAYS make sure the buckle straps are placed outside of the adapter when installing infant car seat.

1. To attach infant car seat adapter, lock brakes. Position adapter as shown. Line up adapter with seat mounts and press down until it clicks into place.
   Pull up on both sides of infant car seat adapter to test it is properly locked into place.

2. ALWAYS make sure the infant car seat is rear-facing before installing into the infant car seat adapter.
   Insert car seat rear-facing into adapter until it clicks into place on both sides of adapter. 

   

   Make sure infant car seat is securely locked into infant car seat adapter. Pull up on handle to test it is properly locked into place.

   

3. ONLY use the buckle straps when installing Chicco® infant car seats.
   For Chicco infant car seats only, attach the buckle straps on both sides of the infant car seat. Pull up on handle to test it is properly locked into place.

4. For Chicco infant car seats only, disconnect buckle straps before removing infant car seat. 
   To remove infant car seat, pull release handle with one hand while lifting up on carry handle with other hand. 

   

5. To remove infant car seat adapter, press both release buttons and lift off stroller.

   

ATTACHING THE PEG-PÉREGO PRIMO VIAGGIO INFANT CAR SEAT ONTO A SINGLE STROLLER 

1. ALWAYS make sure the buckle straps are placed outside of the adapter when installing infant car seat.
   To attach infant car seat adapter, lock brakes. Position adapter as shown. Line up adapter with seat mounts and press down until it clicks into place.
   Pull up on both sides of infant car seat adapter to test it is properly locked into place.

2. Insert adapter bar into hole on one side. Pull back on center of adapter bar and slide toward inserted hole. Line up adapter bar with hole on opposite side and release.

   

   Push down on adapter bar to ensure it is locked in place.

   

3. ALWAYS make sure the infant car seat is rear-facing before installing into the infant car seat adapter.
   Holding car seat rear-facing, align notch on bottom of car seat and press down until it clicks into place.
   Make sure infant car seat is securely locked into infant car seat adapter. Pull up on handle to test it is properly locked into place.

   

4. To remove infant car seat, pull release handle with one hand while lifting up on carry handle with other hand.

5. To remove infant car seat adapter, press both release buttons and lift off stroller.
   To remove adapter bar, grab center of adapter bar and pull back toward one inserted hole. Move adapter bar to the side and release.

   

ATTACHING INFANT CAR SEAT ADAPTER TO PIVOT XPAND IN DOUBLE SEAT MOUNT POSITION 

• ONLY use the fabric guard with Evenflo Pivot Xpand stroller.
• To avoid entrapment, ALWAYS use fabric guard when installing the infant car seat adapter with Pivot Xpand stroller in upper position.
• DO NOT use the fabric guard as a seat.
• ALWAYS remove fabric guard when installing the toddler seat or when attaching an Evenflo infant car seat to the stroller.
• To avoid stroller instability and tip-overs, DO NOT load pockets with over 1.5 lbs (.7 kg) combined.

1. When using infant car seat adapter with Pivot Xpand, follow stroller instructions to set up as a double stroller. 
   Once you have moved both seat mounts from the single seat mount position to the upper mount position, your adapter is ready to be installed onto the mounts.
   Pull up and press down on both mounts to test they are properly locked into place.
2. To attach fabric guard, unzip fabric guard and slide over top of stroller handle with logo facing up as shown.
   Refasten zipper once installed.

3. Wrap hook and loop straps around the sides of stroller tubes and insert back through slots.
   Secure hook and loop strap in place tightly to tube.

   

4. Wrap elastic loops around mounts as far down as possible.

5. ALWAYS make sure the buckle straps are placed outside of the adapter when installing infant car seat.
   To attach infant car seat adapter, lock brakes. Position adapter as shown. Line up adapter with seat mounts and press down until it clicks in place.
   Pull up on both sides of infant car seat adapter to test it is properly locked into place.

   

6. ALWAYS make sure the infant car seat is rear-facing before installing into the infant car seat adapter.
   Insert car seat rear-facing into the adapter until it clicks into place on both sides of the adapter. 
   Make sure infant car seat is securely locked into infant car seat adapter. Pull up on handle to test it is properly locked into place.

7. To remove infant car seat, pull release handle with one hand while lifting up on carry handle with other hand.

   

8. To attach infant car seat adapter, lock brakes. Position adapter as shown. Line up adapter with seat mounts and press down until it clicks in place.
   Pull up on both sides of infant car seat adapter to test it is properly locked into place.

9. ALWAYS make sure the infant car seat is rear-facing before installing into the infant car seat adapter.
   Insert car seat rear-facing into adapter until it clicks into place on both sides of adapter.
   Make sure infant car seat is securely locked into infant car seat adapter. Pull up on handle to test it is properly locked into place.

   

10. To remove infant car seat, pull release handle with one hand while lifting up on carry handle with other hand.

11. To remove infant car seat adapter, press both release buttons and lift off stroller.

    

CARE AND MAINTENANCE 

• Clean minor spills and stains on cloth or plastic surfaces with cold water and mild soap. Air dry.
• Metal and plastic parts can be wiped clean with a soft damp cloth and dried with a soft cloth. DO NOT use abrasive cleaners or solvents.

Troubleshooting

• Problem: Adapter doesn't fit the stroller or car seat properly.
• Solution: Double-check the compatibility between the adapter, stroller, and car seat; ensure proper installation.
• Problem: Stroller wobbles with the adapter and car seat attached.
• Solution: Make sure adapter is properly and securely attached to the stroller; consult the user manual for installation instructions.
• Warning: Never use the adapter if it's damaged or improperly installed, as it may compromise your child's safety.

WARRANTY

For a period of 90 days from the original purchase of this Product, Evenflo® warrants to the original end user  (“Purchaser”) this Product (including any accessories) against defects in material or workmanship. Evenflo’s sole obligation under this express limited warranty shall be, at Evenflo®’s option, to repair or replace any Product that is determined to be defective by Evenflo® and determined to be covered by this warranty.

Pros & Cons

• Pros:
  • Easy-to-use design
  • Seamless integration of stroller and car seat
  • Affordable solution for a travel system
  • Solid build with breathable padding
• Cons:
  • Limited compatibility with Evenflo stroller and car seat models
  • Some users may find installation challenging