Setup: Huawei Watch GT 6 Pro User Manual

Huawei Watch GT 6 Pro: Comprehensive Product Manual and Review Guide

Introduction to Huawei Watch GT 6 Pro

The Huawei Watch GT 6 Pro is a premium smartwatch designed for fitness enthusiasts, outdoor adventurers, and professionals seeking advanced health tracking in a durable, stylish package. Featuring a titanium alloy case with sapphire glass and an ultra-hard metallic coating, this Huawei Watch GT 6 Pro offers exceptional scratch resistance, sweat-resistant anti-corrosion, and 5 ATM water resistance up to 50 meters, making it ideal for swimming, hiking, and extreme sports. Its standout TruSense health monitoring system delivers precise heart rate, ECG, HRV, temperature sensing, and emotional wellbeing metrics across 12 states, while the upgraded Sunflower Positioning System ensures accurate GPS tracking with dual-band L1+L5 and multi-system support like GLONASS, BeiDou, and NavIC.

Key benefits include up to 21 days of battery life (12 days typical, 7 days with AOD), wireless charging, and over 100 sport modes, including pro-level cycling with virtual power meter and trail running with stamina management. Target users—runners training for marathons, cyclists tracking FTP, or golfers navigating courses—benefit from detailed metrics like VO2Max, vertical oscillation, and crash detection that alerts emergency contacts. Available in black, blue, and green with composite woven or titanium straps, the Huawei Watch GT 6 Pro, priced around ₹61,994 in India (approximately $350-$450 globally) is widely available via Huawei stores and retailers, positioning it as a value-packed alternative to Apple Watch Ultra or Galaxy Watch Ultra with superior battery endurance.

Huawei Watch GT 6 Pro Specifications and Key Features

The Huawei Watch GT 6 Pro boasts cutting-edge specs for top-tier performance in fitness tracking and daily use. Running HarmonyOS 6.0, it supports Android 9.0+ with Bluetooth 6.0, NFC, and GNSS for seamless connectivity.

• Display: 1.47-inch AMOLED, 466x466 resolution, 3000 nits peak brightness, sapphire glass, 10% reduced bezels.
• Build: TC4 titanium alloy case, 5 ATM water resistance, rotating crown and side button.
• Sensors: Accelerometer, gyroscope, magnetometer, optical heart rate, barometer, temperature, ambient light, ECG, depth.
• Battery: 867 mAh high-silicon cell, up to 21 days max/12 days typical/7 days AOD/40 hours outdoor sports, wireless charging (0-100% in 60 min).
• GPS: Sunflower system (GPS L1+L5, GLONASS, BeiDou B1I+B1C+B2a, GALILEO E1+E5a, QZSS L1+L5, NavIC).
• Fitness: 100+ modes, cycling power meter, trail run stamina, emotional states, sleep analysis, VO2Max, HRV.
• Storage: 64 GB.

Compared to Apple Watch Ultra 2 (564 mAh battery) or Galaxy Watch Ultra (590 mAh), the Huawei Watch GT 6 Pro excels in longevity and cycling metrics.

About the device

Buttons and touch operations

The watch's color touchscreen supports a range of touch operations like swiping up, down, left, and right, tapping, and touching and holding.

Up button

Operations may differ during calls and workouts.

Rotate

• In list mode and hex grid mode: Scrolls up and down on the app list.
• On the first app list screen in hex grid mode, rotate the crown counterclockwise or swipe down on the screen to display or hide the names of apps.
• In an app: Scrolls up and down on the screen.

To switch between hex grid and list modes:

• In either mode, swipe up on the screen until you reach the last app list screen, and tap Hex grid or List to make the switch.
• Go to Settings > Watch face & home > Home and select Hex grid or List.

Press

• When the screen is off: Turns on the screen.
• On home screen: Takes you to the app list screen.
• On any other screen: Returns to the home screen.
• Mutes incoming Bluetooth calls.

Double-press

• When the screen is on: Takes you to the recent tasks screen to view all running apps.

For example, during a workout session, double-press the Up button to view running tasks in the background, and then you can tap the watch face card to return to the watch home screen.

Press and hold

• When the watch is off: Powers on the watch.
• When the watch is on: Takes you to the restart/power-off screen.
• Forcibly restarts the watch when the button is pressed and held for at least 12 seconds.

Down button

Press

To set which features to access:

• Press the Up button to enter the app list, and go to Settings > Down button > Press once.
• Select target apps for your custom setting. Once you're done, return to the home screen and press the Down button to access the selected features.

Press and hold

Wakes up AI Voice:

• This feature is only available when your watch is paired with a Huawei phone running EMUI 10.1 or later.
• This feature is only available in certain countries/regions. In these markets, language and region settings must be consistent.

Shortcuts

• Press the Up and Down buttons at the same time
• Takes a screenshot and uploads it to your phone Gallery.

Screen controls

Tap

• Chooses and confirms.

Touch and hold

• On home screen: Opens the watch face editing screen.
• On a feature card: Opens the card management screen.

Swipe up

• On home screen: Shows notifications.

Swipe down

• On home screen: Opens the Control Panel.
• You can enable Find Phone or set Focus.
• You can view the remaining battery level and Bluetooth connection status.

Swipe left

• On home screen: Accesses the custom feature cards.

Swipe right

• On home screen: Enters the Assistant·TODAY screen.
• In an app (excluding the app home screen): Returns to the previous screen.

Custom feature cards

After adding frequently used apps as feature cards, you'll be able to swipe left on the watch home screen to view and access these apps with little effort. A feature card can include one or multiple apps, based on your needs.

Adding a card

• Swipe left on the watch home screen to access feature cards. Touch and hold any card to enter the card editing screen.
• Tap the add option and select a desired card.
• Now that you're done, you can swipe left or right on the watch home screen to view the added cards.

Editing a combo card

• Swipe left on the watch home screen to access feature cards. Touch and hold any card to enter the card editing screen.
• You can replace the component by swiping left or right on the card and tapping Custom at the bottom of the card.
• Components of combo cards can only be replaced, not deleted.
• To add a custom workout mode as a feature card, you'll need to first add this mode to the workout mode list in the Workout app.

Moving/removing a card

Swipe left on the watch home screen to access feature cards. Touch and hold any card to enter the card editing screen.

• To move a card: Touch and hold the card and drag it to where you want it.
• To remove a card: Either tap the remove option at the bottom of the card, or swipe up on the card and then tap Remove.

Setting modes

You can quickly enable or disable Do not disturb/Sleep mode in the Control Panel of your watch.

Enabling Do Not Disturb

Enable:

When Do not disturb is enabled, your watch won't ring or vibrate when receiving incoming calls and notifications (except for alarms).

1. Swipe down from the top of the watch face to access Control Panel, tap Focus, and select Do not disturb.
2. After the setting, Control Panel is displayed as Do not disturb.

To disable Do not disturb mode, go to Control Panel and tap the corresponding mode control. You can touch and hold to change the mode or perform other settings.

Scheduled start:

1. You can access the Do not disturb setting screen in either of the following ways:
   • Swipe down from the top of the watch face to access Control Panel, tap Focus, and tap the settings option next to Do not disturb.
   • Go to the app list and tap Settings > Focus > Do not disturb.
2. Tap Add time and set Start, End, and Repeat.

To disable scheduled start, turn off the switch next to the corresponding time period. If the device is in Do not disturb mode, turn off the Do not disturb switch first.

Enabling sleep mode

Enable:

When Sleep mode is enabled, the watch won't ring or vibrate for incoming calls and notifications (except alarms). Raise to wake will also be disabled, and the watch will enter Simple mode.

1. Swipe down from the top of the watch face to access Control Panel, tap Focus, and select Sleep.
2. After the setting, Sleep will be displayed in the Control Panel.

To disable Sleep mode, go to Control Panel and tap the corresponding mode control. You can touch and hold to change the mode or perform other settings.

Scheduled start:

1. You can access the Sleep setting screen in either of the following ways:
   • Swipe down from the top of the watch face to access Control Panel, tap Focus, and tap the settings option next to Sleep.
   • Go to the app list and tap Settings > Focus > Sleep.
2. Tap Add time and set Bedtime, Wake up, and Repeat.

To disable scheduled start, turn off the switch next to the corresponding time period. If the device is in Sleep mode, turn off the Sleep mode switch first.

Managing messages

When your wearable device is linked with Huawei Health and the Notifications feature is enabled, new messages pushed to the status bar of your phone will be synced to your wearable.

Enabling the notifications feature

1. Open Huawei Health, navigate to the device details screen, tap Notifications, and toggle on Notifications.
2. In the app list below, toggle on the switches for the apps you wish to receive notifications from.

On the Notifications screen, the Apps section shows the list of apps that you can receive notifications from.

Health management

Fall detection and emergency SOS

After fall detection is enabled, the watch will detect your posture through the acceleration sensor on the watch. If the watch detects that you have fallen and may be incapacitated, it will enable the emergency SOS feature for you. To disable fall detection, enter the watch's app list, go to Settings > Emergency SOS, and toggle off Fall detection.

• Your watch can't detect all falls. It can sometimes misinterpret high-impact activities as falls and trigger fall detection.
• If your watch is connected to your phone via Bluetooth and your phone has two SIM cards, make sure to set the default card in advance for making emergency calls.
• When paired with an iPhone, your watch cannot send help messages.

Setting emergency information and emergency contacts

Emergency information can help first responders in an emergency. To set emergency information and emergency contacts, do as follows:

1. Open Huawei Health, and go to Me > Profile > Emergency information to add personal information and healthcare information such as your blood type.
2. Go to Emergency contacts > Add emergency contacts and select an emergency contact that you would like to add. You can also tap the delete option next to an emergency contact to delete the contact. You can add up to three emergency contacts.

Make sure you set your emergency contacts in the correct order. If emergency SOS is triggered, your watch will call your first emergency contact and send help messages to all your emergency contacts.

Viewing emergency information:

On your watch

Enter the watch's app list, and go to Settings > Emergency SOS to view your emergency information.

On your phone

Open Huawei Health, choose Me > Profile > Emergency information to view your emergency information.

Fall detection and auto-SOS

• Enter the watch's app list, go to Settings > Emergency SOS, and toggle on Fall detection.
• If the watch detects that you have fallen and may be incapacitated, it displays a pop-up asking you whether to make emergency calls.
• If you choose to initiate emergency SOS or don't perform any operations on the watch within 60 seconds, the watch triggers emergency SOS.
• If emergency contacts have been set, the watch will automatically call the first emergency contact and send a help message containing your current location to all emergency contacts.
• If no emergency contact has been set, public emergency call numbers will be displayed for you to select.

Sleep monitoring

Keep your wearable device properly on while sleeping, and it will automatically record your sleep duration and identify whether you're in deep sleep, light sleep, REM sleep, or awake.

Sleep settings

• Enter the watch app list, tap Sleep, swipe up to access the More screen, and tap Sleep mode.
• You can choose either Sleep mode or Schedule.
• Sleep mode: Disabled by default. When enabled, the wearable won't ring or vibrate for incoming calls and notifications (except when an alarm goes off). Raise to wake will also be disabled, effectively putting the device in a simplified mode.
• Schedule: When enabled, your wearable will enter/exit Sleep mode as scheduled.

To add a scheduled period, tap Add time and set Bedtime, Wake up, and Repeat. Then tap OK. To delete a scheduled period, tap the target and then Delete. You can only edit the scheduled periods preset on your watch but cannot delete them.

ECG measurement

An electrocardiogram (ECG) is a graphical recording of the heart's electrical activity. ECGs provide an insight into your heart rhythm and can help identify irregular heartbeats and screen for potential health risks. Only one-off measurements are supported.

• This feature is currently only available on Huawei Watch GT 6 Pro.
• This feature is only available in certain markets. For details, refer to the Huawei official website. Actual availability shall prevail.

Before you start

• This feature shall be used in accordance with the laws and regulations of medical devices in your local jurisdiction.
• This feature is not intended for users below the age of 18.
• This feature is not intended for people with pacemakers or other implanted devices.
• Strong electromagnetic fields will lead to severe ECG signal distortion. Avoid using this feature in environments with a strong electromagnetic field.
• All data obtained during the use of this app is for reference only and should not be used as a basis for medical research, diagnosis, or treatment.

Before use

To use this feature, first update the Huawei Health app to its latest version. If you're using ECG for the first time, go to Huawei Health > Heart > ECG, and follow the onscreen instructions to activate the ECG app.

Measuring your ECG

• Double-check that the device is worn properly. Enter the app list and select ECG. If you're using the feature for the first time, specify which wrist you're wearing the device on. You can then change this setting anytime on the ECG app home screen by tapping the Settings icon at the bottom.
• Place your arms flat on a table or your lap, with your arms and fingers relaxed.
• Gently place a finger of your free hand on the electrode (Down button) and hold still. A measurement will be automatically initiated.
• During the measurement, hold still, breathe evenly, and avoid speaking. Keep your finger in proper contact with the electrode, but avoid pushing too hard on it.
• Dry skin can undermine the measurement. If you notice that your finger is dry, moisten it with a little water to enhance conductivity.
• The duration of a single measurement is 30 seconds.

Keep still and wait until the measurement is complete, then view your result on the watch screen. You can tap to check out the result description. For more details, access the home screen of Huawei Health on your phone and go to Heart > ECG. To download an ECG report, tap the download icon in the upper right corner of the ECG details screen.

Troubleshooting Common Huawei Watch GT 6 Pro Issues

Users of the Huawei Watch GT 6 Pro may encounter occasional glitches, but most are easily resolved. Common problems include battery drain, GPS inaccuracies, or sensor errors.

• Battery Drains Quickly: Disable AOD or reduce heart rate monitoring frequency; typical use yields 12 days—reset via settings if under 7 days.
• GPS Not Accurate: Ensure Sunflower system firmware is updated; calibrate in open areas for L1+L5 dual-band precision.
• ECG/Heart Rate Errors: Clean sensors, wear snugly; restart watch or app—TruSense system requires steady wrist contact.
• Connection Drops: Re-pair Bluetooth 6.0; compatible with Android 9.0+; update HarmonyOS.
• Error Codes (e.g., E101): Indicates a software glitch—factory reset or contact support.

Prevent issues by updating via the Huawei Health app, avoiding extreme temperatures (-20°C to +45°C), and charging wirelessly. Huawei offers 2-year warranty; contact support at consumer.huawei.com or local service centers for repairs.

Pros and Cons of Huawei Watch GT 6 Pro

Pros

• Exceptional battery life up to 21 days outlasts competitors like Apple Watch Ultra.
• Premium titanium build with sapphire glass and ECG for robust durability.
• Advanced fitness tracking with cycling power, trail run stamina, and 100+ modes—ideal for athletes.
• Accurate Sunflower GPS and TruSense health metrics, including emotional wellbeing.
• Great value at ~$350-$450 vs. pricier rivals with similar features.

Cons

• Limited app ecosystem on HarmonyOS compared to Wear OS.
• No third-party app store; relies on Huawei Health.
• ECG and advanced features Android-only; no iOS ECG.
• Bulkier 46mm size may not suit smaller wrists.

Overall, the Huawei Watch GT 6 Pro offers superior value for battery-focused fitness users over Apple/Samsung alternatives.

Huawei Watch GT 6 Pro Customer Reviews and Feedback

Huawei Watch GT 6 Pro garners 4.5-4.8 star ratings across reviews for its battery and tracking prowess. Users praise the "insane 21-day battery" and precise GPS for runs, with one saying, “Better than Apple Watch Ultra for endurance—cycling power meter is game-changing!”. Fitness buffs love VO2Max, HRV, and emotional tracking, noting “stamina insights helped my marathon prep.”

Common praises: Durable titanium, bright 3000-nit display. Complaints include HarmonyOS app limits and occasional Bluetooth hiccups, like "Wishlist more apps, but battery makes up for it."[6] Most recommend for Android users seeking long-life wearables, addressing minor GPS tweaks via updates.