Introduction

Elevate your bathroom or vanity with the sleek and practical Ovente LED Wall Mount Mirror MFW701x10x. This mirror is perfect for precise makeup application and personal grooming thanks to its dual-sided design with 1X and 10X magnification. Even in dimly lit environments, the built-in LED lighting makes it simple to make out every detail. It effortlessly enhances your everyday beauty routine and mixes practicality with elegance; it costs around $50.

Available Colors

TECHNICAL SPECIFICATIONS

• Model: MFW701x10x
• Series Battery: 4*AAA Battery

IMPORTANT SAFEGUARDS

When using your mirror, basic safety precautions should always be followed, including the following：

• Read all instructions carefully before use.
• Provide close supervision when mirror is being used near children.
• Never operate mirror if it is not working properly, has been dropped, damaged, or submersed in water.
• Do not use outdoors.
• Do not disassemble the mirror. Do not attempt to remove, alter or replace the permanent LED light.
• Never operate where aerosol (spray) products are being used, or where oxygen is administered.
• Be sure mirror is not in a position where it can reflect sunlight. Reflected sunlight can cause fire.
• Always switch the mirror OFF after use and unplug before storing.

MIRROR PARTS

1. On/Off Switch
2. SMD-LED lights
3. Glass
4. Battery Compartment
5. Base
6. Flexible Arm

Description

With its big, rectangular mirror surface constructed of high-quality glass, the Ovente LED Wall Mount Mirror MFW701x10x offers a reflection that is both clear and distortion-free. The sturdy metal construction of the frame guarantees years of reliable use. A system of integrated LED lights illuminates the mirror evenly and brightly from edge to edge. This style not only makes things easier to see, but it also gives any space a more contemporary feel.
Ideal for a variety of uses, including applying makeup, shaving, or just inspecting one's look, the adjustable LED lights let users alter the brightness according to their preferences. The wall-mount design is simple to set up and includes all the required hardware, so it won't be a problem to include into your house.

INSTALLATION

1. Take out the screws from the base
2. Take the wall-plate out of the backside of the base
3. Drill the hole and fix the wall-plate on the wall with the screw
4. Put the mirror back to the plate with step one’s screw
5. Lock with the nut

Magnification Effect

NOTE: When you are further from the mirror, the image is inverted. As you get closer, the image flips to the actual virtual image in magnification standard. This is because of the concave lens of the 10x magnification.

Battery Replacement

1. Before attempting to replace the batteries, turn “OFF” the switch.
2. Turn mirror to its 10x magnification.
3. Hold mirror facing towards you then twist counterclockwise refer to figure 1.
4. Pull the mirror frame out.
5. Open the battery compartment and put 4 x AAA batteries refer to figure 2.
6. Close the battery compartment.
7. Put the mirror frame back and make sure the 3 side dimples are aligned on the groove refer to figure 4.
8. Press the mirror frame down refer to figure 5.

9. Turn right (clockwise) to close refer to figure 6.

   

NOTE: 
It is recommended to always use high quality lithium batteries to maintain its maximum performance.

CARE ALKALINE BATTERIES

• Use only fresh batteries of the required type and size.
• Do not mix old and new batteries, different types of batteries, or rechargeable batteries of different capacities.
• Depleted batteries are to be removed from the item.
• Dispose of the old batteries properly and according to your local regulations.

Setup Guide

The Ovente LED Wall Mount Mirror may be easily installed by following these steps:-

1. Take off the mirror and any hardware that came with it.
2. Make sure the wall anchors are in line with the mounting points on the rear of the mirror.
3. Insert the wall anchors after drilling any required holes in the wall.
4. Make sure the mirror is level and secure before hanging it on the wall anchors.
5. Connect the power cord to a wall socket.
6. Use the integrated control to set the brightness of the LED lights to your liking.

MIRROR MAINTENANCE

1. Make sure that LED lights are OFF before cleaning.
2. Use a soft wet cloth to remove dirt and stains. Wipe with dry cloth afterwards.
3. To protect the mirror from dust simply store it in its original box. Store out of reach of children in a safe dry location.

Troubleshooting

Here are some typical concerns and their solutions for your Ovente LED Wall Mount Mirror:

• If the power cord is not getting electricity, make sure it is inserted into the correct socket. Make sure the outlet is working.
• Make sure the LEDs aren't faulty due to dust accumulation or loose connections. Use a delicate cloth to clean the LEDs.

Advice and Caution: When installing, make sure to always follow the manufacturer's instructions. To keep fingerprints and smudges at bay, it's best to avoid contacting the glass surface with bare hands. For cleaning, use a gentle cloth.

Ovente LED Wall Mount Mirror Pros & Cons

Pros

• Huge, see-through glass surface for pinpoint accuracy
• Adjustable-brightness energy-efficient LED lights
• Elegant and contemporary style that elevates the look of any space
• The provided hardware makes installation a breeze.
• Reasonable cost when compared to competing items

Cons

• For extra heavy-duty support, you might need to use wall anchors.
• There is no fog-free mirror heating feature incorporated into the device.
• Handle with care to preserve the glass surface from scratches.

Customer Reviews

Powerful LED illumination, and simple installation, the Ovente LED Wall Mount Mirror has received rave reviews from satisfied customers. A lot of people who have reviewed this mirror have said that it makes getting ready in the morning much easier because it changes the light in their bathrooms. On the other hand, a built-in heating function would be great for preventing fogging, according to some users.

Most Common Complaints

Although it is usually adjustable, some customers have complained that the LED lights are either too bright or too dim. The lack of an integrated heating function to eliminate fogging after showers has also been pointed out by a couple reviewers.

Warranty

Register your product within 30 days of purchase to activate your one-year limited manufacturer’s warranty at https://ovente.com/register 

WARRANTY IS ONLY VALID IF YOU REGISTER WITHIN 30 DAYS AFTER PURCHASE.

LIMITED ONE (1) YEAR WARRANTY 
Your product has a one (1) year warranty period starting on the date of purchase from an authorized retailer. In the event that the product is defective, please contact us to arrange for a replacement. This warranty only covers defects in workmanship and materials. The warranty does not include damage due to misuse, commercial use, accidents, or natural wear and tear.