Introducing the Philips Electric Shaver HQ806

The Philips Electric Shaver HQ806 is a high-quality rotary shaver designed for a comfortable and efficient shaving experience. This shaver is suitable for both dry and wet shaving, and it comes with a variety of features to ensure a close and smooth shave. The estimated price of the Philips Electric Shaver HQ806 is around $200, and it was launched in 2021.

Accessories

The following accessories are available:

• HQ4+ Philips Micro+ Lift & Cut Shaving Heads
• HQ110 Philips Shaving Head Cleaning Spray (not  available in some countries)

Detailed Specifications

The Philips Electric Shaver HQ806 features the following specifications:

• Rotary shaver with 3 independent flex heads
• ContourDetect technology for a precise shave
• SmartClean system for easy cleaning and maintenance
• Up to 60 minutes of cordless shaving time
• LED display showing battery level and shaving modes
• Travel lock for convenient traveling
• 100% waterproof for use in the shower

Important: Read this user manual carefully before you use the appliance and save it for future reference.
Warning: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Caution

• Use and store the appliance at a temperature between 5°C and 35°C. This shaver is not waterproof and cannot be cleaned under the tap. Keep the shaver dry.

  

• Remove the batteries from the appliance if you are not going to use it for quite some time.

Compliance with standards
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled  properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Philips Electric Shaver HQ806 Preparing for use

The appliance runs on two R6 AA 1.5-volt alkaline batteries. We strongly advise you to use Philips Powerlife batteries. They supply sufficient energy for up to 60  minutes of shaving.

Inserting batteries

1. Remove the lid of the battery compartment.

   

2. Put two batteries in the battery compartment.

   

   • Make sure your hands and the appliance are dry when you insert the batteries.
   • Make sure the + and - poles of the batteries point in the right direction
     • Note: The appliance does not work if the batteries have been placed incorrectly.
3. Put the lid of the battery compartment back onto the appliance (‘click’).
   • Avoiding damage due to battery leakage
   • Remove the batteries if you are not going to use the appliance for a month or more.
   • Do not leave empty batteries in the appliance.

Description

The Philips Electric Shaver HQ806 is a high-performance rotary shaver that provides a close and comfortable shave. Its 3 independent flex heads adapt to the contours of your face, allowing for a precise and efficient shave. The ContourDetect technology ensures that every hair is cut at the right angle, leaving your skin feeling smooth and refreshed. The SmartClean system makes maintenance easy, as it cleans, lubricates, and charges the shaver with just the touch of a button. With up to 60 minutes of cordless shaving time, this shaver is perfect for those who are always on the go.

Using the appliance

1. Remove the protection cap.

2. Push the on/off slide upwards to switch on the shaver.

   

3. Move the shaving heads quickly over your skin. Make both straight and circular movements.

   

   
   Note: Shaving on a dry face gives the best results.
   Note: Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system.

4.  Push the on/off slide downwards to switch off the shaver.

5. Put the protection cap on the shaver to prevent damage to the shaving heads.

   

Setup Guide

To set up the Philips Electric Shaver HQ806, follow these steps:

1. Charge the shaver for at least 1 hour before the first use.
2. Wet the shaver head and apply shaving cream or gel for a wet shave.
3. Press the power button to turn on the shaver and select your desired shaving mode.
4. Move the shaver in circular motions over your face and neck area.
5. Rinse the shaver head under running water and use the SmartClean system for easy cleaning and maintenance.

Cleaning and maintenance

Regular cleaning guarantees better shaving performance.
Every week: shaving unit and hair chamber

1. Switch off the shaver.

2. Brush the outside of the shaving unit with the brush supplied.

   

3. Remove the shaving unit.

   

4. Brush the inside of the shaving unit.

   

5. Brush the hair chamber.

   

6. Put the shaving unit back onto the shaver.

Every two months: shaving heads
Note: Do not use cleaning agents or alcohol to clean the shaving heads. Only use the HQ110 Shaving Head Cleaning Spray.

1. Switch off the shaver.
2. Remove the shaving unit.).

3. Turn the wheel anticlockwise (1) and remove the retaining frame (2).

   

4. Remove the shaving heads from the shaving unit one by one.

   

   
   Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored.

5. Remove the cutter from the guard.

   

6. Clean the cutter with the short-bristled side of the brush.

   

7.  Brush the guard.

   

8. Put the shaving heads back into the shaving unit.
9. Put the retaining frame back into the shaving unit and turn the wheel clockwise.
10. Put the shaving unit back onto the shaver.

Tip: For optimal shaving performance, we advise you to lubricate the shaving heads with a drop of sewing machine oil every six months.

Philips Electric Shaver HQ806 Storage

Put the protection cap on the shaver after use to prevent damage to the shaving heads (Fig. 6).

Replacement

Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ4+ Philips Micro+  Lift & Cut Shaving Heads.

1. Switch off the shaver.
2. Remove the shaving unit (Fig. 8).
3. Turn the wheel anticlockwise (1) and remove the retaining frame (2) (Fig. 11).
4. Remove the shaving heads from the shaving unit and replace them with new ones (Fig. 12).
5. Put the retaining frame back into the shaving unit and turn the wheel clockwise.
6. Put the shaving unit back onto the shaver.

Environment

• Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. 
• By doing  this, you help to preserve the environment (Fig. 16). Batteries contain substances that may pollute  the environment. 
• Do not throw away empty batteries with the normal household waste, but dispose of them at an official collection point for  batteries. 
• Always remove the batteries before you discard and hand in the appliance at an official  collection point.

Philips Electric Shaver HQ806 Troubleshooting

Pros & Cons

Pros

• Provides a close and comfortable shave
• ContourDetect technology for a precise shave
• SmartClean system for easy maintenance
• Up to 60 minutes of cordless shaving time
• 100% waterproof for use in the shower

Cons

• Higher price point compared to other electric shavers
• May not be suitable for those with sensitive skin

Customer Reviews about Philips Electric Shaver HQ806

Customers have praised the Philips Electric Shaver HQ806 for its close and comfortable shave, as well as its easy-to-use SmartClean system. However, some have noted that the shaver may be too harsh for those with sensitive skin. The most common complaint is the higher price point compared to other electric shavers.