Introduction of Philips Multigroom Trimmer MG3750

The Philips Multigroom Trimmer MG3750 is a versatile grooming tool designed for men who want a single device to handle all their trimming needs. With 13 attachments, this trimmer can be used for beard, hair, body, and detailing. The MG3750 is suitable for both dry and wet shaving and has a battery life of up to 6 hours. This trimmer is available for an estimated price of $60 and was launched in 2019.

General description

1. Rotary nose and ear trimmer
2. Detail trimmer
3. Full size trimmer
4. On/off button
5. Handle
6. Socket for small plug
7. Beard comb (7mm/9/32in)
8. Beard comb (5mm/3/16in)
9. Beard comb (3mm/1/8in)
10. Beard and stubble comb (1.5mm/1/16in)
11. Hair comb (9mm/3/8in)
12. Hair comb (12mm/15/32in)
13. Hair comb (16mm/21/32in)
14. Pouch
15. Power plug
16. Small plug

Not shown: cleaning brush

Detailed Specifications

The Philips Multigroom Trimmer MG3750 features DualCut technology, which means it has twice the number of blades for faster and more efficient cutting. The trimmer is fully washable, making it easy to clean. It has a lithium-ion battery that provides up to 6 hours of cordless use. The MG3750 comes with 13 attachments, including a precision trimmer, body grooming attachments, and a storage pouch. The trimmer has adjustable zoom wheel for easy length settings.

Charging

It takes approximately 8 hours to fully charge the appliance. When the appliance is fully charged, it has an operating time of up to 60 minutes.

1. Switch off the appliance.

2. Put the small plug in the appliance and put the adapter in the wall socket (Fig. 3).

   

3. After charging, remove the adapter from the wall socket and pull the small plug out of the appliance.

Philips Multigroom Trimmer MG3750 Description

The Philips Multigroom Trimmer MG3750 is a high-quality grooming tool that is suitable for all trimming needs. The trimmer's DualCut technology ensures faster and more efficient cutting, while the lithium-ion battery provides long-lasting use. The MG3750 is fully washable, making it easy to clean. The trimmer comes with 13 attachments, providing versatility and convenience. Whether you're trimming your beard, hair, body, or doing detailing, this trimmer has you covered.

Using the product

Warning: Always check the product before you use it. Do not use the product if it is damaged, as this may cause injury. Always replace a damaged part with one of the original type.

Note: This product can only be used without cord (Fig. 4).

Detaching and attaching cutting elements

1. To detach a cutting element, push upwards against the teeth of the cutting unit and take it off the handle (Fig. 5).
2. To attach a cutting element, insert the lug of the cutting unit into the guiding slot and push the cutting element onto the product (‚click‘) (Fig. 6).

Detaching and attaching combs

1. To detach any type of comb from the cutting element, pull its back part off the product and then slide it off the cutting element (Fig. 7).
2. To attach any type of comb onto a cutting element, slide the front part of the comb onto the teeth and push the projection at the back of the comb into the product (‚click‘) (Fig. 8).

Switching the product on and off

1. To switch on the product, press the on/off button once (Fig. 9).

2. To switch off the product, press the on/off button once (Fig. 9).

   

Precision attachments for use on face

Rotary nose and ear trimmer

You can use the nose and ear trimmer attachment to trim your nose hair and ear hair.

1. Make sure your nostrils are clean. Make sure your outer ear channels are clean and free from wax.
2. Do not insert the tip more than 0.5cm/1/4in and make controlled movements.

Trimming nose hair

Gently move the tip in and out of your nose while turning it around to remove unwanted hairs (Fig. 10).

Trimming ear hair

1. Slowly move the tip round the ear to remove hairs that stick out beyond the rim of the ear.

2. Gently move the tip in and out of the outer ear channel to remove unwanted hairs (Fig. 11).

   

Detail trimmer

You can use the detail trimmer without a comb to create fine lines and contours around your facial style, close to the skin (to a length of 0.5mm/1/32in).

1. Hold the detail trimming head perpendicular to the skin and move the trimming head upwards or downwards with gentle pressure (Fig. 12).

   

Attachments for use on beard

Full-size trimmer

You can use the full-size metal trimmer without a comb to trim hair close to the skin or to create clean lines around your beard, neck and sideburns close to the skin (to a length of 0.5mm/1/32in).

1. To trim hair close to the skin, place the flat side of the cutting element against your skin and make strokes against the direction of hair growth (Fig. 13).

2. For contouring hold the cutting element perpendicular to the skin and move it upwards or downwards with gentle pressure (Fig. 14).

   

Beard combs

You can use the beard combs attached to the full size trimmer to evenly trim your beard and moustache. The product comes with 3 different beard combs. The indication on each comb corresponds to the hair length in millimeters.
Note: You can also use the hair combs to trim your beard (see ‚Hair combs‘).

1. Attach a beard comb onto the product.
2. Switch on the product.

3. To trim most effectively, move the product against the hair growth direction (Fig. 15).

   

4. Make sure that the surface of the comb always stays in contact with the skin.

Stubble comb

You can use the stubble comb attached to the full size trimmer to trim your stubble to a length of 1.5mm (1/16inch) (Fig. 16).

Attachments for use on head

Full-size trimmer

You can use the full-size metal trimmer without a comb to clip hair very close to the skin (to a length of 0.5mm/1/32in) or to create contours around your ears or neck.

1. Move the product slowly and smoothly.
2. Follow the natural hairline (Fig. 17).

3. To contour the neckline and sideburns, turn the product and make downward strokes (Fig. 18).

   

4. Only cut the hair ends. The hairline should be close to the ear.

Hair combs

You can use a hair comb attached to the full size trimmer for an even haircut.The product comes with 3 different hair combs. The indication on each comb corresponds to the hair length in millimeters.
Note: You can also use the beard combs to clip your hair (see ‚Beard combs‘).

1. Attach a hair comb onto the product.
2. 2 Switch on the product.

3. 3 Slowly move the product against the hair growth direction (Fig. 19). Press lightly and make sure that the surface of the comb always stays in contact with the scalp to obtain an even result.

   

Setup Guide of Philips Multigroom Trimmer MG3750

To set up the Philips Multigroom Trimmer MG3750, first charge the battery fully. Then, choose the attachment you want to use and slide it onto the trimmer. Adjust the zoom wheel to your desired length setting. The trimmer can be used for both dry and wet shaving. To clean the trimmer, simply rinse it under running water.

Cleaning and storage

Note: Only the attachments can be rinsed under the tap.
Caution: Never use scouring pads, abrasive cleaning agents or aggressive liquids such as gasoline or acetone to clean the product.

1. Switch off the product and disconnect it from the wall outlet.
2. Wipe the handle of the product with a dry cloth.
3. Remove any comb or attachment from the product.
4. Brush and/or blow out any hair that has accumulated in the hair chamber (Fig. 20).
5. Brush and/or blow out any hair that has accumulated in the attachments and/or combs (Fig. 21).

6. Clean the attachments (Fig. 22) and the combs (Fig. 23) under a lukewarm tap after every use.

   

   • Note: Only the attachments and combs can be rinsed under the tap
7. Carefully shake off excess water and let all parts dry completely.
   • Note: Never dry the trimmer teeth with a towel or tissue, as this may damage the trimmer teeth.
8. You can store the attachments in the pouch supplied to keep them clean.

Removing the rechargeable battery
Only remove the rechargeable battery when you discard the appliance. Before you remove the battery, make sure that the appliance is disconnected from the wall socket and that thebattery is completely empty. Take any necessary safety precautions when you handle tools to open the appliance and when you dispose of the rechargeable battery.

1. Check if there are screws in the back or front of the appliance. If so, remove them.
2. Remove the back and/or front panel of the appliance with a screwdriver. If necessary, also remove additional screws and/or parts until you see the printed circuit board with the rechargeable battery.
3. Remove the rechargeable battery.

Troubleshooting

If the trimmer is not charging, make sure the charging cord is properly connected. If the trimmer is not cutting properly, make sure the attachment is securely attached and the zoom wheel is in the correct position. Always ensure the trimmer is fully charged before use to avoid any issues.

Philips Multigroom Trimmer MG3750 Guarantee

Philips Consumer Lifestyle guarantees its products for a period of two years after the date of purchase. If any defect due to faulty materials and workmanship occurs within this two-year guarantee period, Philips Consumer Lifestyle will repair or replace the product at its expense.

Pros & Cons

Pros

• DualCut technology for faster and more efficient cutting
• Lithium-ion battery for long-lasting use
• Fully washable for easy cleaning
• Versatile with 13 attachments
• Adjustable zoom wheel for easy length settings

Cons

• May be too bulky for some users
• Can be difficult to clean some attachments

Customer Reviews about Philips Multigroom Trimmer MG3750

Customers have given the Philips Multigroom Trimmer MG3750 positive reviews, praising its versatility and long-lasting battery life. Some customers have mentioned that the trimmer can be a bit difficult to clean, especially the smaller attachments. However, overall, customers are happy with their purchase.