Prowinch PWY300 Hydraulic Winch 66000 lbs. EATON Motor 

Introducing the Strong and powerful industrial motor intended for heavy-duty lifting uses is the Prowinch 66000 lbs Eaton Motor PWY300. Designed to run up to 66000 lbs, this motor is perfect for usage in demanding settings including material handling, manufacturing, and construction. Key component for high-capacity lifting systems, its superior Eaton technology guarantees dependability, durability, and efficiency.

Packaging Details

• Net Weight (NW1): 1786 lbs / 810 Kg
• Gross Weight (GW1): 1874 lbs / 850 Kg
• Packaging Height (PH1): 30 in / 76 cm
• Packaging Width (PW1): 58 in / 146 cm
• Packaging Depth (PD1): 28 in / 69 cm

Specifications

• Wire rope capacity per layer (first/last): 66000 / 47,238 lbs
• 1st Layer Load Capacity: 66139 lb / 30000 kg
• Speed / min: 18~29 ft | 6 ~ 9 m
• Number of Speeds: 1 Speed
• Motor/Engine Type: EATON 6K-390
• Oil Pressure: 2465 psi
• Oil Flow: 31 gpm
• Protection: IEC 60529 IP67
• Free Spooling Clutch Type: Manual
• Wire Rope: NOT Included ø1 1/4 in x 197 | ø32 mm x 60m
• Standards: SAE-J706
• Warranty: 3 Year

Key Features

• 3 Year Warranty
• Service and Parts Available in Stock in USA and Latin America

Description

Made to last, the premium Prowinch PWY300 Hydraulic Winch 66000 lbs. EATON Motor  is It is built with heavy-duty materials and components able to resist the stresses of constant operation in demanding surroundings. The motor is made to produce dependable and effective power; the winch boasts a strong frame and gearbox that offer great strength and longevity. Additionally easy operation and direction of adjustment of the winch speed and direction are made possible by its user-friendly control system. Furthermore included in the winch is a load restriction that helps avoid overloading and harm to the cargo or the winch.

Prowinch PWY300 Instructions

Weight & Dimensions

• Total Weight: 1786 lbs / 810 Kg

Setup Guide

To set up the Prowinch PWY300 Hydraulic Winch 66000 lbs. EATON Motor , follow these steps:

1. Choose a flat and stable surface for the winch, and make sure that there is enough space for the winch and the load.
2. Install the wire rope onto the drum, making sure that it is properly seated and centered.
3. Connect the winch to a power source and test the motor to ensure that it is working properly.
4. Set the load limiter to the desired level, based on the weight of the load and the winch capacity.
5. Attach the hook or other load-bearing device to the wire rope, and make sure that it is securely fastened.
6. Operate the winch at a slow and steady pace, and monitor the load and the winch for any signs of stress or damage.

Troubleshooting

If you encounter any problems with the Prowinch PWY300 Hydraulic Winch 66000 lbs. EATON Motor , consult the following troubleshooting guide:

• If the motor is not working, check the power source and the wiring for any loose connections or damage.
• If the winch is not pulling the load, check the wire rope for any kinks or damage, and make sure that it is properly seated on the drum.
• If the winch is overheating, reduce the winch speed and check the load for any signs of excess weight or stress.
• If the load limiter is not functioning properly, adjust the settings or consult the user manual for further instructions.
• If the winch is making unusual noises or vibrations, stop the winch immediately and inspect the winch for any signs of damage or wear.

Pros & Cons

Pros

• High capacity and efficient motor
• Robust and durable construction
• Easy to operate and adjust
• Equipped with a load limiter and dynamic braking system
• Suitable for a wide range of industrial and commercial applications

Cons

• Expensive price point
• Heavy and bulky design
• Requires a stable and flat surface for operation
• May require professional installation and maintenance
• Limited availability and distribution