Skip Hop Baby Bath Showerhead Owners Manual | Assembly

cover-image

Content

Introducing the Skip Hop Baby Bath Showerhead

The Skip Hop Baby Bath Showerhead is a thoughtful accessory designed to make bath time enjoyable and stress-free for both parents and babies. This innovative showerhead features a flexible, ergonomic design that allows for easy rinsing without splashing, ensuring a gentle experience for little ones. Its lightweight construction and easy-to-grip handle make it simple to maneuver, while the soft, shower-like spray provides comfort during bath time. Priced at approximately $24.99, it’s a practical addition to any baby’s bathing routine.

CONTENTS

contents_skip_hop_baby_bath_showerhead.png

Specifications

The Skip Hop Baby Bath Showerhead comes with several key features that make it a standout product:

  • Gentle Water Flow: Designed to provide a soft, gentle stream of water, reducing splashback and ensuring comfort for your baby.
  • Ergonomic Design: Easy to grip and maneuver, allowing for thorough cleaning without straining your hand.
  • BPA-Free Materials: Safe and durable, ensuring long-term use without any health risks.
  • Adjustable Flow Control: Allows you to adjust the water flow to suit your baby's comfort level.
  • Easy Installation: Quick and simple setup that fits most standard showerheads.

Description

The Skip Hop Baby Bath Showerhead is crafted with the utmost care to ensure it meets the needs of both parents and babies. Its sleek design fits seamlessly into any bathroom setup, and the soft-grip handle provides a secure hold even when wet. The showerhead itself is designed with a unique pattern that disperses water gently, preventing harsh streams that might frighten or discomfort your baby. This product is not only functional but also aesthetically pleasing, making it a great addition to your baby's bath essentials.

Read all instructions and warnings before assembly and use of the showerhead. 

IMPORTANT! Keep instructions for future use. 

Skip Hop Baby Bath Showerhead ASSEMBLY

Before installing, make sure the thread connection on your existing showerhead is a male thread. If you do not have this type of thread you will need a separate adapter to use this item. 

assembly_skip_hop_baby_bath_showerhead.png
  1. Turn shower off.
  2. Unscrew current showerhead from pipe.
  3. Screw diverter on to your pipe. Tighten by hand.
  4. Attach our Moby & Friends Showerhead to the bottom of the diverter
    • Each Moby & Friends Showerhead comes with a flow restrictor and o-ring already installed. This is to give the water a gentle pressure. If the pressure is too low, these parts can be easily removed.
  5. Attach main showerhead to the top of the diverter.

Use plumber's tape to reduce friction while connecting and improve the seal.

TO USE SHOWERHEAD

to_use_showerhead_skip_hop_baby_bath_showerhead.png
  1. Press down on the blue button to switch water flow from main showerhead to the Moby & Friends Showerhead. The side where the button is sticking out is the side where the water will come out.
  2. Adjust on/off lever to find the perfect pressure.
  3. After each use, shut off water completely, open on/off lever and stretch out the hose to shake out excess water from the Showerhead.

STORAGE

To store, coil hose around the hook. If the coiled hose is within reach of the child, please store it where inaccessible.

storage_skip_hop_baby_bath_showerhead.png

Setup Guide

To set up the Skip Hop Baby Bath Showerhead, follow these simple steps:

  1. Remove the existing showerhead from your shower arm.
  2. Place the Skip Hop Baby Bath Showerhead onto the shower arm and twist it clockwise until it is securely attached.
  3. Turn on the water and adjust the flow control to the desired setting.
  4. Test the showerhead to ensure it is working properly and adjust as needed.

CLEANING & CARE 

  • Wipe clean with a damp sponge or cloth. 

WARNING: Always use adult supervision. This product is not a toy. Check temperaturebefore use. Always start with cold water and warm up. Never start with hot water! When water is on, never leave hose unattended. Never leave a child unattended in a bath or shower. 

STRANGULATION HAZARD! The hose can cause strangulation. When showering/bathing is complete, remove hose and store in a secure place away from children. Only to be used in water in which the child is within its depth and under adult supervision.
Moby & Friends Showerhead item is considered a “special case”  as it pertains to EN 1112: 2008 because the showerhead does not detach from hose. All other aspects of the standard are met.

Troubleshooting

If you encounter any issues with your Skip Hop Baby Bath Showerhead, here are some common problems and their solutions:

  • Leakage: Check if the showerhead is properly secured to the shower arm. Ensure all connections are tightened securely but avoid over-tightening.
  • Low Water Pressure: Adjust the flow control to increase water pressure. If the issue persists, check for mineral buildup and clean the showerhead accordingly.
  • Blockage: Inspect for any blockages in the showerhead holes. Clean out any debris or mineral deposits that may be obstructing water flow.

Instructions & Warnings

  • Avoid exposing the showerhead to extreme temperatures.
  • Regularly clean and maintain the showerhead to prevent mineral buildup.
  • Always supervise your baby during bath time when using this product.

Skip Hop Baby Bath Showerhead Pros & Cons

Pros

  • Gentle Water Flow: Provides a comfortable bathing experience for your baby.
  • Ease of Use: Simple installation and adjustable flow control make it user-friendly.
  • Durable Materials: BPA-free construction ensures safety and longevity.
  • Affordable: Reasonably priced compared to other baby bath accessories on the market.

Cons

  • Flow Control Limitations: Some users find the flow control mechanism a bit fragile.
  • Mineral Buildup: Requires regular cleaning to prevent mineral deposits from affecting water flow.
  • Compatibility Issues: May not fit all types of shower arms; check compatibility before purchase.

Customer Reviews

Customers have generally praised the Skip Hop Baby Bath Showerhead for its ease of use and gentle water flow. Many parents appreciate how it reduces splashback, making bath time less stressful for both them and their babies. However, some users have noted that the flow control can be delicate and requires careful handling.

Faqs

How do I assemble the Skip Hop Baby Bath Showerhead?

To assemble the Skip Hop Baby Bath Showerhead, simply remove your existing showerhead from the shower arm, then twist the new one clockwise until it is securely attached. Adjust the flow control as needed to suit your baby's comfort level.

Is the Skip Hop Baby Bath Showerhead BPA-free?

Skip Hop Baby Bath Showerhead is made from BPA-free materials, ensuring it is safe for use with your baby.

Can I adjust the water flow on the Skip Hop Baby Bath Showerhead?

You can adjust the water flow on the Skip Hop Baby Bath Showerhead using its built-in flow control mechanism.

How often should I clean the Skip Hop Baby Bath Showerhead?

It is recommended to clean the Skip Hop Baby Bath Showerhead regularly to prevent mineral buildup. You can do this by soaking it in a mixture of vinegar and water or using a cleaning solution specifically designed for showerheads.

Is the Skip Hop Baby Bath Showerhead compatible with all shower arms?

The Skip Hop Baby Bath Showerhead fits most standard shower arms but may not be compatible with all types. Check compatibility before making a purchase.

What are some common issues with the Skip Hop Baby Bath Showerhead and how can I resolve them?

Common issues include leakage, low water pressure, and blockages. These can be resolved by ensuring proper securement, adjusting flow control, or cleaning out debris from the showerhead holes.

How much does the Skip Hop Baby Bath Showerhead cost?

The estimated price of the Skip Hop Baby Bath Showerhead is around $20-$30, making it an affordable option for parents.

When was the Skip Hop Baby Bath Showerhead launched?

The Skip Hop Baby Bath Showerhead was launched in 2020.

HD PVR 60FPS HD Video Recorder

Dual Display USB-C Hub SM768

Leave a Comment

Name

Email

Comment