Startech.com 1U Rack Mount PDU with C13 Outlets PDU08C13H User Manual
Content
startech.com 1U Rack Mount PDU with C13 Outlets PDU08C13H Manual
Introduction
The startech.com 1U Rack Mount PDU with C13 Outlets PDU08C13H is a horizontal power distribution unit designed for server racks, network cabinets, and professional equipment enclosures. It provides eight IEC C13 outlets in a compact 1U form factor, helping administrators distribute power neatly without occupying unnecessary cabinet space.
This rack-mount PDU accepts power through an IEC C20 input and is suitable for single-phase installations operating from 100 to 240V AC. Its integrated circuit protection and surge suppression help protect connected equipment from electrical disturbances and overload conditions. The included mounting hardware supports installation in a standard 19-inch EIA-310D rack.
The PDU08C13H is intended for data centers, server rooms, telecommunications cabinets, laboratories, offices, and home infrastructure environments. It is especially useful when servers, switches, storage appliances, and other rack-mounted devices use IEC C14 inlet connections. The horizontal design keeps power connections accessible while supporting cleaner cable management than a loose power strip.
Use the startech.com 1U Rack Mount PDU with C13 Outlets PDU08C13H when reliable centralized power distribution is needed without remote monitoring or switched-outlet functionality. It is a practical choice for installations where equipment power is controlled locally and the total connected load remains within the PDU and branch-circuit ratings.
Specifications
- Model: PDU08C13H
- Form factor: Horizontal 1U rack-mount power distribution unit
- Rack compatibility: Standard 19-inch EIA-310D racks
- Input connector: One IEC C20 input
- Output connectors: Eight IEC C13 outlets
- Input voltage: 100 to 240V AC
- Maximum current: 16A rating for North American installations
- Published load capacity: Up to 1,920VA at 120V/16A or 4,800VA at 240V/20A, subject to applicable installation and regulatory limits
- Electrical design: Single-phase power distribution
- Protection: Circuit breaker and two fuses
- Surge suppression: 3,600 joules
- Approximate dimensions: 18.9 inches wide, 3.9 inches long, and 1.7 inches high
- Included accessories: Four M5 screws, four M5 cage nuts, and a power cord suitable for the specified regional configuration
Verify the rating shown on the product label, supplied cord, and local electrical documentation before connecting equipment. The total current of all connected devices must remain within the lowest applicable limit.
How to Install the PDU08C13H in a Server Rack
- Confirm that the rack is stable, properly grounded, and compatible with horizontal 1U equipment.
- Switch off or disconnect the branch circuit before installing the PDU.
- Locate one free rack unit and align the PDU mounting brackets with the rack’s vertical rails.
- Install the supplied M5 cage nuts and screws, then tighten them evenly. Do not overtighten or deform the rack rails.
- Connect the appropriate power cable to the PDU’s IEC C20 input. Confirm that the cable plug matches the facility receptacle and circuit rating.
- Route the power cable so it does not interfere with ventilation, doors, slide rails, or other equipment.
- Connect compatible rack equipment to the eight C13 outlets. Distribute loads where practical and avoid exceeding the permitted total current.
- Restore branch-circuit power and check the PDU indicator or protection device for normal operation.
Do not connect the PDU to an incompatible voltage source, use damaged cords, remove the grounding connection, or daisy-chain it with another power strip. If the PDU trips immediately, disconnect all loads and investigate the circuit and connected equipment before resetting protection.
Troubleshooting the StarTech PDU08C13H
PDU or connected equipment has no power
Confirm that the facility receptacle is energized, the input cable is fully seated, and the equipment power cords are compatible with C13 outlets. Check the PDU protection device and reconnect loads one at a time to identify a faulty device or overloaded circuit.
Circuit protection trips
Disconnect the connected equipment and reduce the total load before resetting the protection device. Motors, power supplies, and servers can create startup currents that exceed normal operating consumption. Never repeatedly reset a tripped device without finding the cause.
Outlet or plug becomes hot
Immediately disconnect power if a connector shows heat damage, discoloration, looseness, or a burning odor. Replace damaged cables and have the circuit inspected by a qualified electrician. Do not use adapters that create an insecure connection.
Surge protection concerns
Surge suppression does not replace proper grounding, circuit protection, or an uninterruptible power supply. Use the PDU only on a correctly wired circuit and follow facility electrical procedures.
This model does not use documented user-facing error codes; a failure to power equipment is normally investigated through the input circuit, protection device, cords, and connected load. For product-specific assistance, consult the current StarTech documentation and contact StarTech technical support. Warranty service and replacement eligibility should be confirmed through StarTech’s official warranty and return-support channels.
Pros and Cons
Advantages
- Efficient rack use: The horizontal 1U format fits standard 19-inch cabinets while preserving vertical rack space.
- Eight C13 outlets: Provides a practical connection point for servers, switches, storage systems, and other IEC-equipped devices.
- Broad electrical range: The 100–240V AC design supports common single-phase rack power environments.
- Built-in protection: Circuit protection and 3,600-joule surge suppression add protection beyond a basic unprotected power strip.
- Straightforward installation: Supplied rack hardware and a standard C20 input simplify fixed installations.
Limitations
- No remote management: It does not provide network monitoring, outlet-level switching, environmental sensors, or automatic reboot features typical of intelligent PDUs.
- Shared capacity: The total rating applies across the connected outlets, so eight devices cannot each draw the maximum independently.
- Fixed power distribution: Users needing switched outlet groups, current displays, or alert notifications may require a metered or managed PDU.
- Equipment compatibility: Devices using standard household plugs may require an approved, correctly rated connection solution.
The startech.com 1U Rack Mount PDU with C13 Outlets PDU08C13H best suits small and medium rack installations that need dependable local power distribution. Choose a managed PDU instead when remote visibility, automated control, or detailed energy reporting is required.
Faqs
How do I install the startech.com 1U Rack Mount PDU with C13 Outlets PDU08C13H in a server rack?
What devices are compatible with the startech.com 1U Rack Mount PDU with C13 Outlets PDU08C13H?
How should I distribute equipment across the eight C13 outlets on the PDU08C13H?
Why is the startech.com 1U Rack Mount PDU with C13 Outlets PDU08C13H not powering my equipment?
Can the PDU08C13H be used with a 240V rack power system?
What should I do if the PDU08C13H overload protection trips?
How can I improve cable management and airflow with this 1U rack PDU?
How should I maintain and safely inspect the startech.com 1U Rack Mount PDU with C13 Outlets PDU08C13H?
More startech.com manuals
- Startech.com 1U Horizontal Cable Management Panel CMPNL1UC User Manual
- Startech.com 1U Server Adjustable Mounting Rack Rail UNIRAILS1UB User Manual
- Startech.com 1U Steel Vertical Wall Mount Rack Bracket RK119WALLV User Manual
- Startech.com 1U Rackmount LCD Console With KVM Switch CABCONS1716I User Manual
- Startech.com 1U Rackmount LCD Console With KVM Switch RACKCONS1716 User Manual
- Startech.com 1U Rackmount LCD Cabinet Console 1UCABCONS17 User Manual
Leave a Comment
