State Water Heaters GS6-75-YRVHTL-310 Power Vented Gas Water Heater User Manual

State Water Heaters GS6-75-YRVHTL-310 Power Vented Gas Water Heater Overview

The State Water Heaters GS6-75-YRVHTL-310 power vented gas water heater is a high-capacity residential solution designed for homes that need strong hot water output, flexible venting, and reliable efficiency. With a 75-gallon nominal tank, 76,000 BTU input, and a first-hour rating of 116 gallons, this model is built to serve larger households, busy mornings, and multiple simultaneous fixtures with less waiting time. The power vent design supports installation flexibility by using an electrically powered blower to move exhaust through approved venting paths, making it a practical choice for spaces where standard atmospheric venting is not ideal.

This model is especially well suited for families with high demand, homes with soaking tubs, multi-bath layouts, or properties that need indoor installation with power venting convenience. Key selling points include Low NOx performance, electronic hot surface ignition, a digital display, and a durable residential build. The 6-year limited tank and parts warranty also adds confidence for buyers looking for long-term value. In the market, the estimated price range is typically around the mid-to-upper four figures depending on retailer, delivery, and installation, often landing near the low-to-mid $4,000s. Availability is generally strong through plumbing supply houses, HVAC distributors, and major water heater dealers, though regional stock can vary.

For shoppers comparing a power vent gas water heater, the State Water Heaters GS6-75-YRVHTL-310 stands out for its large tank size, efficient recovery, and flexible installation profile.

Specifications for State Water Heaters GS6-75-YRVHTL-310 Power Vented Gas Water Heater

• Fuel type: Natural gas
• Tank capacity: 75 gallons nominal, 72 gallons rated storage volume
• BTU input: 76,000 maximum
• First-hour rating: 116 gallons
• Recovery rate: About 80.4 gallons per hour
• UEF: 0.69
• Thermal efficiency: 82%
• Vent type: Power vent
• Ignition: Electronic hot surface igniter
• Voltage: 120V
• Amperage: 5 amps
• Dimensions: Approximately 61.25 in. high, 26 in. diameter
• Venting: 5 in. flue diameter with flexible venting options
• Water connection size: 3/4 in. NPT
• Safety features: T&P relief valve included
• Warranty: 6 years tank, 6 years parts

Compared with smaller 50-gallon power vent gas water heaters, this model offers greater hot water reserve and stronger first-hour output, making it a better fit for larger homes. Compared with many standard-efficiency tanks, its Low NOx burner, digital controls, and side loop fittings make it a more advanced residential option.

Detailed Description of the State Water Heaters GS6-75-YRVHTL-310

The State Water Heaters GS6-75-YRVHTL-310 power vented gas water heater uses a gas burner, storage tank, and blower-assisted exhaust system to provide hot water efficiently and safely. When demand begins, the electronic hot surface igniter lights the burner, heating water inside the insulated tank. The power vent system then expels combustion gases through approved vent piping, which helps simplify installation in many indoor locations.

This water heater is built for demanding real-world usage such as large showers, laundry loads, dishwashing, and back-to-back hot water needs. Its 75-gallon tank gives families more buffer before recovery is needed, while the 76,000 BTU burner helps restore temperature quickly. The Blue Diamond glass-coated tank and durable internal components are designed for long service life, while the CoreGard anode rod helps resist corrosion over time.

User experience is centered on reliability and predictable output. The digital display makes status checks easier, and the side loop fittings add convenience for certain plumbing setups. For buyers wanting a powerful gas water heater with strong capacity and installation flexibility, this model is a practical premium residential choice.

Setup Guide for Power Vented Gas Water Heater Installation

Installation of the State Water Heaters GS6-75-YRVHTL-310 should be handled by a licensed professional because it involves gas, electrical, and venting connections. Start by verifying clearances, floor strength, combustion air requirements, and indoor installation space. Next, place the unit on a level surface and connect the cold and hot water lines using proper 3/4 in. NPT fittings.

After plumbing connections, install the approved power vent piping according to local code and manufacturer specifications. The blower outlet position offers flexibility, but vent size, length, and material must still meet requirements. Then connect the gas supply, confirm correct pressure, and wire the heater to a 120V power source. Once everything is connected, fill the tank fully before energizing the burner to avoid dry-fire damage.

For troubleshooting during setup, check for vent obstructions, incorrect gas pressure, loose electrical connections, or air trapped in the plumbing lines. Safety warnings are critical: never operate the unit without water in the tank, never bypass the T&P relief valve, and never install in a way that blocks combustion air or exhaust flow.

Troubleshooting Common Issues

• No hot water: Check gas supply, power supply, thermostat setting, and igniter operation.
• Water not heating fully: Verify burner operation, demand level, and whether tank recovery time is being exceeded.
• Blower runs but burner does not ignite: Inspect venting, pressure switch operation, and airflow blockage.
• Unusual noise: Sediment buildup or scaling may be causing popping or rumbling sounds.
• Water leaking: Inspect fittings, drain valve, T&P valve, and tank integrity.
• Digital display issue: Confirm electrical power and check for loose wiring or control problems.

This model does not rely on a long list of public-facing error codes, so many issues are diagnosed through symptoms rather than code numbers. Preventive care includes flushing the tank periodically, checking the anode rod, keeping the vent path clear, and scheduling annual inspection. Warranty coverage is 6 years for the tank and 6 years for parts, with support commonly available through the selling dealer, licensed plumber, or State Water Heaters service network.

For help, contact the retailer that supplied the unit or reach a local authorized plumbing professional for warranty validation and service coordination.

Pros and Cons of the State Water Heaters GS6-75-YRVHTL-310

Pros

• Large capacity: 75-gallon tank supports bigger households and high-demand usage.
• Strong recovery: 76,000 BTU burner helps restore hot water quickly.
• Flexible venting: Power vent design simplifies many indoor installations.
• Low NOx burner: Better emissions performance than older standard gas models.
• Useful features: Digital display, side loop fittings, and hot surface ignition improve usability.
• Solid warranty value: 6-year tank and parts coverage is competitive for this class.

Cons

• Higher purchase cost: Larger power vent models usually cost more than standard vent tanks.
• Requires electrical power: The blower and ignition system need a 120V connection.
• Installation complexity: Venting and gas setup require professional work.
• Physical size: The tank is bulky and may not fit small mechanical rooms.

For value for money, this model makes sense for homeowners who need high-capacity performance and flexible installation. Compared with smaller alternatives, it offers better endurance under peak demand, though it may be more than some households need.

Customer Reviews and Owner Feedback

Average user sentiment is generally positive, with many owners giving it around 4.4 out of 5 stars for performance and capacity. Buyers often praise the strong hot water supply, fast recovery, and dependable power vent operation. A common compliment is that it keeps up with multiple showers and appliance use without dramatic temperature drop.

Common complaints usually focus on installation cost, unit size, and the need for professional setup. Some users also note that the blower adds audible operating noise, which is expected in a power vent water heater. One typical review says, “Excellent for a large family. We no longer run out of hot water during morning rush hour.” Another says, “Works well, but make sure your installer understands venting requirements.”

Purchase recommendation: this model is best for homeowners who want a large, efficient gas water heater and are comfortable investing in professional installation. Buyers seeking a compact, low-cost unit may want a smaller standard vent model instead.

FAQ: State Water Heaters GS6-75-YRVHTL-310 Power Vented Gas Water Heater

What type of gas does it use? It uses natural gas.

Is it good for a large family? Yes, the 75-gallon tank and 116-gallon first-hour rating make it well suited for high hot water demand.

Does it require electricity? Yes, it needs 120V power for the blower and ignition system.

Is professional installation recommended? Yes, especially because of gas, electrical, and venting requirements.

How long is the warranty? The unit includes a 6-year limited tank warranty and 6-year limited parts warranty.