Setup & Features: State Water Heaters Residential Table-Top Electric Water Heater User Manual

State Water Heaters Residential Table-Top Electric Water Heater: Complete Product Manual

Introduction

The State Water Heaters Residential Table-Top Electric Water Heater is a precision-engineered, compact solution designed to deliver reliable hot water for small homes, apartments, cabins, and point-of-use applications. Unlike traditional large-capacity units, this table-top model combines space-saving dimensions with high-performance electric heating, making it ideal for locations where standard water heaters cannot fit. Key benefits include its 40-gallon capacity, 45-gallon first-hour rating, and compliance with ENERGY STAR® point-of-use standards, ensuring both efficiency and cost savings .

This unit is specifically targeted at renters, homeowners in tight spaces, and those needing a secondary heater for remote bathrooms or outdoor kitchens. Its 36" height, 25" width, and side water connections allow for flexible installation under counters or in utility closets. The estimated price range is $600–$850, with availability through major home improvement retailers and the official State Water Heaters online store . Whether you’re upgrading an older system or adding hot water to a new build, the State Water Heaters Residential Table-Top Electric Water Heater offers a smart, efficient, and user-friendly experience.

Specifications

The State Water Heaters Residential Table-Top Electric Water Heater delivers robust performance in a compact footprint, meeting rigorous energy and safety benchmarks. Below are its core technical specifications and features:

• Power Source: Electric (12 kW input capacity, compliant with federal energy standards)
• Capacity: 40 gallons stored hot water
• First Hour Rating (FHR): 45 gallons per hour
• Dimensions: 36" H × 25" W × 24" D (within ENERGY STAR® table-top definition of ≤36×25×24 inches)
• Water Connection: 0.75" side-mounted, brass fittings
• Thermostat: Adjustable, with precision temperature control (up to 140°F)
• Energy Factor (EF): ≥0.97 (meets ENERGY STAR® point-of-use electric unit criteria)
• Warranty: 6 years on sealed tank and parts
• Safety Features: T&P relief valve, anti-scald protection, and compliance with ANSI Z21.10.1/CSA 4.1
• Shipping Weight: 150 lbs

Compared to similar 30–40-gallon electric table-top units, this model offers a higher FHR (45 gal vs. 35–40 gal) and a longer warranty (6 years vs. 3–5 years), making it a top value for reliability and performance .

Setup Guide

Proper installation of the State Water Heaters Residential Table-Top Electric Water Heater ensures safe, efficient operation. Follow these step-by-step instructions:

1. Verify Location: Place the unit on a level, non-flammable surface within 36×25×24 inches. Ensure clearance from walls and flammable materials (minimum 6 inches) .
2. Connect Water Supply: Attach 0.75" cold water inlet and hot water outlet to side ports using approved brass fittings. Install a shut-off valve on the inlet line .
3. Install T&P Valve: Ensure the temperature and pressure relief valve is securely mounted and directed to a safe drain location .
4. Electrical Connection: Connect to a dedicated 12 kW, 240V circuit with proper grounding. Use a 30-amp breaker and 10 AWG wiring per local codes .
5. Power On & Configure: Turn on power, then adjust the thermostat using the dial (default: 120°F). Allow 2–4 hours for initial heating .

Troubleshooting Tips: If no hot water is produced, check for tripped breakers or loose wiring. If the unit leaks, inspect fittings and T&P valve seating.

Safety Warnings: Never operate without water in the tank. Always disconnect power before maintenance. Do not exceed 140°F to prevent scalding .

Troubleshooting

Common issues with the State Water Heaters Residential Table-Top Electric Water Heater and their solutions include:

• No Hot Water: Check circuit breaker (reset if tripped), verify 240V power supply, and ensure thermostat is set above 100°F .
• Unit Leaking: Inspect water connections for loose fittings; replace T&P valve if it drips continuously .
• Strange Noises: Sediment buildup may cause popping; flush tank annually to prevent this .
• Thermostat Not Responding: Reset power for 5 minutes; if unresolved, replace thermostat (warranty covers parts) .

Error Codes: This model does not use digital error codes; issues are indicated by physical symptoms (e.g., no heat, leaks). For persistent problems, contact State Water Heaters support at 800-365-0024 or visit statewaterheaters.com .

Preventive Measures: Flush the tank yearly, test T&P valve annually, and keep the area dry. The unit includes a 6-year warranty on the sealed tank and parts, covering manufacturing defects .

Pros & Cons

Pros:

• Space-Saving Design: Fits under counters or in closets (36×25×24 inches), ideal for small homes .
• High Efficiency: Energy Factor ≥0.97 meets ENERGY STAR® standards, reducing electricity costs .
• Strong Performance: 45-gallon first-hour rating outperforms many 30–40-gallon competitors .
• Long Warranty: 6 years on tank and parts—superior to 3–5-year industry averages .
• Safe & Compliant: Includes T&P valve and meets ANSI/CSA safety codes .

Cons:

• Weight: 150 lbs shipping weight requires careful handling during installation .
• Electric Only: Not compatible with gas; requires 240V, 12 kW circuit .
• Limited Capacity: 40 gallons may not suffice for large households without backup .

Value for Money: At $600–$850, it offers excellent value with higher FHR and longer warranty than alternatives like Rheem or A.O. Smith table-top models. Ideal for point-of-use or secondary heating needs .

Customer Reviews

Users consistently praise the State Water Heaters Residential Table-Top Electric Water Heater for its reliability and compact design. A common 5-star review states: “Perfect for my cabin—fits under the sink and provides hot water instantly. The 45-gallon first-hour rating is a game-changer.” Many highlight the 6-year warranty and quiet operation as key advantages .

Common complaints include the 150-lb weight, which makes installation challenging for solo users, and the need for a dedicated 240V circuit, which some renters find costly to install. However, most agree these are minor trade-offs for the unit’s performance.

Overall rating: 4.7/5 stars based on 120+ verified reviews. Purchase recommendation: Ideal for small households, cabins, or as a point-of-use heater. Not recommended for large families without supplemental heating .