Sunjoe Electric Chain Saw SWJ698E-RM User Manual

Content

Sun Joe Electric Chain Saw SWJ698E-RM Manual and User Guide

Introduction to the Sun Joe Electric Chain Saw SWJ698E-RM

The sunjoe Electric Chain Saw SWJ698E-RM is a compact, corded electric chainsaw designed for residential yard maintenance. Its 9-amp motor and 12-inch Oregon bar and chain provide practical cutting performance for pruning branches, removing storm-damaged limbs, cutting small logs, and handling routine property cleanup. Because it uses household electricity rather than gasoline, the saw starts with a push of a button and avoids fuel mixing, engine exhaust, and carburetor maintenance.

This electric chainsaw is intended for homeowners who need a straightforward tool for light-duty outdoor work. The automatic chain oiler helps maintain chain lubrication during operation, while the chain brake and rear hand guard provide important protective features when the saw is used correctly. Tool-less chain tensioning also makes routine chain adjustments easier than on many traditional gas-powered models.

The SWJ698E-RM is best suited to users who have access to a properly rated outdoor extension cord and need consistent power for short- to medium-duration cutting tasks. It is not a cordless model, so mobility depends on cord length and outlet access. It is also intended for residential use rather than professional forestry, commercial logging, large-tree felling, or continuous heavy cutting.

Read the complete owner’s manual before operation. Wear eye and hearing protection, sturdy gloves, slip-resistant footwear, and protective clothing, and keep bystanders away from the cutting area.

Sun Joe SWJ698E-RM Specifications and Key Features

Product type: Corded electric chain saw for residential use
Motor: 9-amp electric motor
Bar length: 12 inches
Bar and chain: Oregon cutting system
Chain pitch: 3/8 inch
Chain gauge: 0.050 inch
Cutting capacity: Suitable for light-duty branches and timber up to approximately 9 inches when conditions, technique, and wood type permit
Lubrication: Automatic chain-oiling system
Chain adjustment: Tool-less chain-tensioning design
Safety features: Chain brake, rear hand guard, safety switch, and push-button starting
Handle configuration: Rear-handle design
Power requirement: Household electrical outlet and an appropriately rated outdoor extension cord
Approximate product weight: 7.3 pounds before adding an extension cord

Actual cutting performance depends on wood hardness, branch diameter, chain sharpness, chain tension, lubrication, and operator technique. Do not treat the maximum cutting size as a guarantee for every material or cutting position.

How to Set Up the Sun Joe SWJ698E-RM

Remove the saw, guide bar cover, and accessories from the packaging. Inspect the housing, power cord, bar, chain, and hand guard for damage.
Confirm that the chain is installed in the correct cutting direction around the guide bar. The cutting teeth should face forward along the top of the bar.
Check chain tension before every use. The chain should sit snugly in the guide-bar groove while still moving freely by hand when the saw is disconnected from power.
Fill the chain-oil reservoir with suitable bar-and-chain oil. Do not operate the saw with an empty reservoir.
Attach a suitable outdoor extension cord. Use a cord rated for the saw’s electrical load, keep connections away from wet ground, and use the cord-retention feature to reduce accidental unplugging.
Inspect the work area and remove stones, wire, loose branches, and other objects that could contact the chain.
Release the chain brake only when prepared to cut. Hold the saw with both hands, press the safety switch, and then operate the trigger according to the manual.

Never connect the saw during assembly, adjustment, cleaning, or maintenance. If the chain is loose, over-tight, damaged, or difficult to move, disconnect power and correct the condition before starting.

SWJ698E-RM Troubleshooting Guide

Motor Does Not Start

Verify that the extension cord is connected, the outlet has power, the safety switch is engaged, and the chain brake is in the correct operating position. Reset a tripped circuit breaker or ground-fault device if appropriate. Do not use the saw if the cord, plug, or switch is damaged.

Chain Does Not Move

Disconnect power before inspection. The chain brake may be engaged, the chain may be overtightened, or debris may be lodged in the bar groove. Clean the guide bar and confirm correct tension.

Cutting Is Slow or Uneven

A dull or incorrectly installed chain is the most common cause. Sharpen or replace the chain using the correct specifications, verify lubrication, and avoid forcing the saw through the cut.

Chain Overheats or Produces Smoke

Stop immediately and disconnect the saw. Check the oil level, oil delivery, chain tension, and bar groove. Continued operation without lubrication can damage the bar, chain, and drive components.

Support and Warranty

The refurbished SWJ698E-RM manual states that refurbished products are covered for 90 days against defects in materials or workmanship when used for normal residential purposes. Wear items such as chains are excluded. For service, maintenance questions, replacement parts, or warranty assistance, contact Snow Joe and Sun Joe customer service at 1-866-SNOWJOE (1-866-766-9563). Unauthorized repairs may affect warranty coverage.

Pros and Cons of the Sun Joe Electric Chain Saw SWJ698E-RM

Pro—easy starting: The electric motor starts without fuel preparation, choke adjustment, or pull-starting.
Pro—low routine maintenance: Users avoid gasoline storage, fuel mixing, spark-plug servicing, and engine exhaust.
Pro—useful residential cutting size: The 12-inch bar is practical for pruning, storm cleanup, and small firewood tasks.
Pro—convenient chain care: Automatic oiling and tool-less tension adjustment simplify routine operation.
Pro—lighter format: Its approximately 7.3-pound body is easier to handle than many larger gas chainsaws.
Con—corded operation: An extension cord limits travel distance and requires careful management around branches, water, and the cutting path.
Con—residential duty range: It is not the right choice for commercial work, large-diameter trees, or prolonged heavy cutting.
Con—ongoing chain maintenance: The chain must remain sharp, correctly tensioned, and lubricated for safe and efficient cutting.
Best suited for: Homeowners performing occasional pruning, branch removal, and light property maintenance near an electrical outlet.
Consider another type if: You need cordless portability, extended remote operation, professional logging capability, or frequent cutting of large hardwood logs.

PDF

Faqs

How do I set up the sunjoe Electric Chain Saw SWJ698E-RM for the first time?

Before setup, unplug the sunjoe Electric Chain Saw SWJ698E-RM and remove the protective bar sheath. Install the guide bar and chain in the correct cutting direction, then adjust the chain tension until the chain fits snugly while still moving freely by hand with gloves. Fill the automatic chain-oil reservoir with suitable bar-and-chain oil, inspect the power cord, and confirm that the chain brake, trigger lock, and safety guard operate correctly before cutting.

Why is the sunjoe Electric Chain Saw SWJ698E-RM not starting?

If the sunjoe Electric Chain Saw SWJ698E-RM will not start, first disconnect it and check the extension cord, plug, outlet, and circuit breaker. Use an outdoor-rated extension cord with sufficient capacity, and avoid damaged or excessively long cords. Reconnect the saw, release the chain brake if engaged, hold the safety lock, and squeeze the trigger as directed in the manual. If the motor remains unresponsive, stop troubleshooting and arrange authorized service.

How do I fix a chain that keeps coming loose on the sunjoe Electric Chain Saw SWJ698E-RM?

Unplug the sunjoe Electric Chain Saw SWJ698E-RM and allow the chain to cool before adjustment. Loosen the guide-bar cover slightly, use the tool-less tensioning control to remove slack, and retighten the cover securely. The chain should sit properly in every bar groove without sagging, but it should not be tightened so much that it cannot move freely. Recheck tension during use because a new or overheated chain may stretch.

How does the automatic chain oiler work on the sunjoe Electric Chain Saw SWJ698E-RM?

The sunjoe Electric Chain Saw SWJ698E-RM uses an automatic chain-oiling system to deliver bar-and-chain oil while the chain operates. Check the oil reservoir before each cutting session and refill it when necessary. To verify lubrication, run the saw briefly with the bar pointed toward a safe surface and look for a light oil trace; never touch the chain. If oil is absent, stop using the saw and inspect the reservoir, oil passage, and bar groove for blockage.

What extension cord can I use with the sunjoe Electric Chain Saw SWJ698E-RM?

The sunjoe Electric Chain Saw SWJ698E-RM is a corded 9-amp electric chain saw, so it requires a properly rated outdoor extension cord and a grounded outdoor receptacle. Choose a cord suitable for the saw's current demand and keep the connection away from wet ground, standing water, sharp edges, and the cutting path. Use a cord-locking method to prevent separation, and do not operate the saw if the cord or plug has cuts, exposed wires, or heat damage.

Why does the sunjoe Electric Chain Saw SWJ698E-RM cut slowly or produce sawdust instead of chips?

Slow cutting and fine sawdust usually indicate a dull chain, incorrect chain tension, insufficient lubrication, or excessive pressure on the saw. Unplug the sunjoe Electric Chain Saw SWJ698E-RM, inspect the cutters, and sharpen or replace the chain when necessary. Confirm that the chain moves smoothly in the guide-bar groove and that oil reaches the bar. Let the 9-amp motor perform the cut at a steady pace rather than forcing the bar through the wood.

How should I clean and store the sunjoe Electric Chain Saw SWJ698E-RM?

After every use, unplug the sunjoe Electric Chain Saw SWJ698E-RM and brush away sawdust from the guide bar, chain, sprocket area, cooling vents, and housing. Clear debris from the bar groove without damaging the oil channel, wipe the exterior dry, and check for loose fasteners or damaged parts. Fit the protective bar sheath before storage, coil the cord loosely, and keep the saw in a dry, secure location away from children and corrosive materials.

When should I replace the chain or guide bar on the sunjoe Electric Chain Saw SWJ698E-RM?

Replace the chain on the sunjoe Electric Chain Saw SWJ698E-RM when sharpening no longer restores cutting performance, cutters are damaged, links or rivets have excessive play, or the cutting edges have become too short. Inspect the guide bar for deep rails, bending, uneven wear, or a damaged nose sprocket. Use only replacement components that match the saw's required chain specifications, and never install a new chain with a severely worn sprocket.