Introduction

The Eaton Ellipse Eco 1600 USBIEC UPS is a reliable and efficient power protection solution designed to provide uninterrupted power supply to your electronic devices. This UPS is perfect for home offices, small businesses, and networks, offering a battery backup that protects connected equipment from power outages, surges, and spikes. With an estimated price range of $200 to $250 and a launch date of January 2021, this UPS system is an excellent investment for anyone looking to secure their electronic devices.

Packaging

Before installing the Ellipse, read the booklet 3 containing the safety instructions that must be followed. Then follow the instructions given in this manual2.

Description

6 ON/OFFbuttonforthe battery backup outlets
7 Scroll down
8 ASR LED
LCD
9 UPS ON
10 AVR mode
11 Battery mode
12 Internal fault
13 Output load level
14 Battery level
15 Input measurements
16 Output measurements
17 Measuring unit
Outlets
18 Surge protection outlets
19 Battery backup outlets
20 Protection (circuit breaker)

Technical characteristics

Here is the table formatted as requested:

Technical Characteristics	Ellipse PRO 650	Ellipse PRO 850	Ellipse PRO 1200	Ellipse PRO 1600
UPS power	650 VA / 400 W	850 VA / 510 W	1200 VA / 750 W	1600 VA / 1000 W
Nominal input voltage	165 V - 264 V, adjustable to 150 V - 284 V
Input frequency	50/60 Hz (46 - 70 Hz working range)
Voltage/frequency of battery backup outlets 19 in battery mode	220 V / 230 V / 240 V +15 % -20 % (50/60 Hz ± 1 Hz)
Total output current for all outlets	10 A max
Output current of battery backup outlets 19	3 A max	3.6 A max	5.5 A max	7.3 A max
Leakage current	0.4 mA
Input protection	10 A resettable circuit breaker
Transfer time	5 ms typical
Telephone/Data surge protection	Tel, ISDN, ADSL, Ethernet
Sealed lead-acid battery	12 V, 7 Ah	12 V, 9 Ah	2x12V, 7 Ah	2x12V, 9 Ah
Automatic battery test	Once a week
Average battery life	4 years typical, depending on temperature and number of discharge cycles
Operating temperature	0 to 35 °C
Storage temperature	-25 °C to +55 °C
Operating relative humidity	0 to 85 %
Operating elevation	0 to 2000 m
Safety standards	IEC 62040-1, CE certified
Electromagnetic compatibility standards	IEC 62040-2, C1*
Warranty	3 years
Dimensions (mm/inch)	260 x 82 x 285 / 10.24 x 3.23 x 11.22	275 x 82 x 390 / 10.83 x 3.23 x 15.35
Weight (kg/lb)	6.9 / 15.2	7.3 / 16.1	9.7 / 21.4	11.5 / 25.4

(*) Warning: Output cables should not exceed 10 m length.

Performances tested according to IEC 61643-1 (class 3) standard for 8/20 µs surge wave

Here is the table formatted as requested:

Performances tested according to IEC 61643-1 (class 3) standard for 8/20 μs surge wave	Ellipse PRO 650	Ellipse PRO 850	Ellipse PRO 1200	Ellipse PRO 1600
AC input source protection, Ellipse PRO:
Uoc (common mode / differential mode)	6 kV / 2 kV	6 kV / 2 kV	6 kV / 2 kV	6 kV / 2 kV
Up (common mode / differential mode)	1.8 kV / 1 kV	1.8 kV / 1 kV	1.8 kV / 1 kV	1.8 kV / 1 kV
In	3 kA	3 kA	3 kA	3 kA
Dielectric isolation
AC Ground	1500 Vac, 50 Hz
AC / TEL	3000 Vac, 50 Hz
Tel / Ground	1000 Vac, 50 Hz
Temporary overvoltage (TOV)
Uc	250 Vac
Ut	430 Vac
Energy dissipation	405 Joules

Quick start Eaton Ellipse Eco 1600 USBIEC UPS

Battery disposal and safety

Caution. Battery service life is reduced by 50 % for every ten degrees above 25 °C.
The battery must be replaced exclusively by qualified personnel (risk of shock), with new battery approved by Eaton to ensure correct operation of the UPS.
The battery must be disposed of in accordance with applicable regulations. To remove the battery, shut down the UPS (button 6 OFF), remove the power cord and proceed as indicated below "Battery change".

Battery change

Warning: take care not to inverse the polarity + (red) and - (black) when connecting the battery as this will destroy the device.

Operating conditions

This product is an Uninterruptible Power Supply (UPS) for computers and their peripherals, television sets, stereo systems and video recorders... It must not be used to supply other electrical equipment (lighting, heating, household appliances, etc.).
UPS can be installed in horizontal, vertical position, or placed in Rack 2U (optional kit).

UPS connections

Connect the UPS 1 to the AC-power system via a wall outlet with an earth connector, using the supplied cord 4 for a UPS with FR/DIN sockets or with the supply cord of your computer for a UPS with IEC sockets (see figure A).
Plug critical equipment (computer, monitor, modem, etc.) into the outlets 19 providing battery backup power and surge protection (see figure B), taking care not to exceed the rated current indicated in amperes.
Other devices (printer, scanner, fax, etc.) can be connect to the surge protection outlets 18 (see figure B). The surge protection outlets are not backed up by battery power in the event of a power outage.
Leave sufficient space around the UPS for better ventilation.

Optional Internet modem / Network connection:
A modem or Ethernet data line can be protected against surges by connecting it via the UPS. Connect the existing device cable between the wall outlet and the UPS, and use a similar cable between the UPS and the device, as indicated in figure C (cable not supplied).
Optional USB connection:
The UPS device can be connected to the computer using the USB cable 5 supplied (see figure C).
Eaton UPS Companion software is downloadable from powerquality.eaton.com. Register for the warranty on powerquality.eaton.com.

Master and EcoControl outlets operating procedure

In order to limit energy consumption of peripherals (scanner, printer) in standby mode, the Ellipse PRO is equipped with EcoControl outlets that are dependent on the Master outlet. When the main device supplied by the Master outlet (computer) is shut down, the EcoControl outlets are automatically deactivated and the peripherals shut down. This function (deactivated by default) is validated and configured using the configuration tool integrated in the software.
Note: when the function is activated, do not connect critical applications to EcoControl outlets. Threshold setup A default setup ensures the correct operation of the EcoControl function. However, depending on the consumption of the main load, the trigger threshold of the EcoControl function may have to be modified using the configuration software:

First, make sure that the function is activated in the "EcoControl Function" tab of the configuration tool.
If the peripherals connected to the EcoControl outlets do not switch off when the main load is not in normal operation (ex: when in standby mode), the detection threshold value must be set to High.
If the rated consumption level of the main load is low and the EcoControl outlets shut down when the main load is operating normally, the detection threshold value must be set to Low.

UPS setting through the LCD

Release scroll down button to select menu

Example of setting

LCD shut off if no activity for 3 minutes.

Eaton Ellipse Eco 1600 USBIEC UPS Operation

Battery charge
The UPS charges the battery as soon as it is connected to the AC outlet, whether button 6 is pressed or not. When used for the first time, the battery will only provide its maximum performance after it has been charged for 8 hours. It is recommended that the UPS be permanently connected to the AC power supply to ensure the best possible performance.
Switching-on the UPS
Press button 6 for about 1 second.
Surge protection outlets 18 without battery backup
Equipment connected to these outlets is supplied as soon as the AC cord 4 is plugged in. They are not affected by button 6 .
Battery backup outlets 19
Equipment connected to these outlets is supplied as soon as button 6 turns green (see figure D).
These outlets can be turned on even if the UPS is not connected to AC power (button 6 flashes).
AC-power disturbance
- If AC power is disturbed or fails, the UPS continues to operate on battery power. Button 6 flashes green. In normal mode, the audible alarm beeps every ten seconds, then every three seconds when the end of battery backup time is near. In silent mode, the audible alarm simply beeps once when the UPS transfers to battery power.
- If the power outage lasts longer than the battery backup time, the UPS shuts down and automatically restarts when power is restored. Following a complete discharge, a few hours are required to recharge the battery back to full backup time.
Surge protection:
All outlets include surge protection.
Shutdown of the battery backup outlets 19
Press button 6 for more than two seconds.

Setup Guide

Setting up the Eaton Ellipse Eco 1600 USBIEC UPS is simple and straightforward:

Place the UPS system in a location close to your electronic devices.
Connect the battery to the UPS system using the provided cable.
Connect the electronic devices to the battery-supported outlets or surge-protected outlets.
Plug the UPS system into a wall outlet.
Configure the UPS system using the LCD display.
Test the UPS system by unplugging the wall outlet and verifying that the battery-supported outlets are providing power to the connected devices.

Troubleshooting

Problem	Diagnostic	Solution
1. The battery backup outlets are not supplied with power.	Button 6 is not lighted on.	Press button 6 and check that it turns green.
2. The connected devices are not supplied when AC power fails.	The devices are not connected to the battery backup outlets 19.	Connect the devices to the battery backup outlets 19.
3. AC power is available, but the UPS operates on battery power.	Circuit breaker 20, located at the rear of the UPS, has been tripped by an overload on the UPS output.	Disconnect excess equipment and reset the circuit breaker 20 by pressing the corresponding button.
4. Green button 6 flashes and audible alarm beeps every 3 seconds.	The UPS battery backup outlets 19 are overloaded.	Disconnect excess equipment connected to the battery backup outlets 19.
5. Fault sign 12 appear on the LCD panel and audible alarm beeps continuously.	A fault has occurred on the UPS. The battery backup outlets 19 are no longer supplied.	Call after-sales support.
6. Green LED 8 is off and the filtered outlets 18 are supplied.	Surge protection is no longer provided.	Call after-sales support.
7. EcoControl outlets keep powered when main application (Master outlet) is stopped.	EcoControl function is not activated or not properly set.	Activate or set properly EcoControl function using the software provided with the product.

Eaton Ellipse Eco 1600 USBIEC UPS Pros & Cons

Pros

Reliable and efficient power protection solution
LCD display for easy monitoring and configuration
Five battery-supported outlets for backup power
High efficiency and reduced energy consumption
Three-year warranty

Cons

Limited to five battery-supported outlets
No remote management capabilities

Customer Reviews

Customers have praised the Eaton Ellipse Eco 1600 USBIEC UPS for its reliability, efficiency, and ease of use. While some have noted that the limited number of battery-supported outlets is a drawback, most have been satisfied with the overall functionality and performance of the UPS system. Common complaints include issues with the LCD display and difficulties with USB connectivity, but these issues have been relatively rare.

Search Manuals in: 1600va

Read More